UG2001 - UG2005
2.0A ULTRA-FAST GLASS PASSIVATED RECTIFIER
Features
Glass Passivated Die Construction
Diffused Junction
Ultra-Fast Switching for High Efficiency
High Current Capability and Low Forward Voltage Drop
Surge Overload Rating to 60A Peak
Low Reverse Leakage Current
Plastic Material: UL Flammability Classification Rating 94V-0
Mechanical Data
Case: Molded Plastic
Terminals: Plated Leads Solderable per MIL-STD-202, Method 208
Polarity: Cathode Band
Marking: Type Number
Weight: 0.4 grams (approx.)
Mounting Position: Any
|
|
A |
|
|
|
|
B |
|
|
|
|
|
A |
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
C
|
|
|
D |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DO-15 |
|
|
|
|
Dim |
Min |
|
Max |
|
|
A |
25.40 |
|
|
|
|
B |
5.50 |
|
7.62 |
|
|
C |
0.686 |
|
0.889 |
|
|
D |
2.60 |
|
3.6 |
|
|
|
|
|
|
|
All Dimensions in mm
Maximum Ratings and Electrical Characteristics @ TA = 25 C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic |
|
Symbol |
UG2001 |
UG2002 |
|
UG2003 |
UG2004 |
UG2005 |
Unit |
Peak Repetitive Reverse Voltage |
|
VRRM |
|
|
|
|
|
|
|
Working Peak Reverse Voltage |
|
VRWM |
50 |
100 |
|
200 |
400 |
600 |
V |
DC Blocking Voltage |
|
VR |
|
|
|
|
|
|
|
RMS Reverse Voltage |
|
VR(RMS) |
35 |
70 |
|
140 |
280 |
420 |
V |
Average Rectified Output Current |
|
IO |
|
|
2.0 |
|
|
A |
|
(Note 1) |
@ TA = 55 C |
|
|
|
|
||||
|
|
|
|
|
|
|
|
||
Non-Repetitive Peak Forward Surge Current |
|
IFSM |
|
|
|
|
|
|
|
8.3ms Single half sine-wave Superimposed on Rated Load |
|
|
60 |
|
|
A |
|||
(JEDEC Method) |
|
|
|
|
|
|
|
|
|
Forward Voltage |
@ IF = 2.0A |
VFM |
|
1.0 |
|
|
1.3 |
1.7 |
V |
Peak Reverse Current |
@ TA = 25 C |
IRM |
|
|
8.0 |
|
|
A |
|
at Rated DC Blocking Voltage |
@ TA = 100 C |
|
|
100 |
|
|
|||
|
|
|
|
|
|
||||
Reverse Recovery Time (Note 3) |
|
trr |
|
|
50 |
|
|
ns |
|
Typical Junction Capacitance (Note 2) |
|
Cj |
|
|
20 |
|
10 |
pF |
|
Typical Thermal Resistance Junction to Ambient |
R JA |
|
|
50 |
|
|
K/W |
||
Operating and Storage Temperature Range |
|
Tj, TSTG |
|
|
|
-65 to +150 |
|
|
C |
|
|
|
|
|
|
|
|
|
|
Notes: 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case.
2.Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3.Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5.
DS27009 Rev. A1-2 |
1 of 2 |
UG2001 - UG2005 |
Loading...