PR1001/L - PR1005/L
1.0A FAST RECOVERY RECTIFIER
Features
Diffused Junction
Fast Switching for High Efficiency
High Current Capability and Low Forward Voltage Drop
Surge Overload Rating to 30A Peak
Low Reverse Leakage Current
Plastic Material: UL Flammability Classification Rating 94V-0
Mechanical Data
Case: Molded Plastic
Terminals: Plated Leads Solderable per MIL-STD-202, Method 208
Polarity: Cathode Band
Marking: Type Number
DO-41 Weight: 0.35 grams (approx.)
A-405 Weight: 0.2 grams (approx.)
|
|
A |
|
|
|
|
B |
|
|
|
|
|
A |
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
C
|
|
|
|
D |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DO-41 Plastic |
|
A-405 |
|
||
|
Dim |
Min |
Max |
|
Min |
Max |
|
|
A |
25.40 |
|
|
25.40 |
|
|
|
B |
4.06 |
5.21 |
|
4.10 |
5.20 |
|
|
C |
0.71 |
0.864 |
|
0.53 |
0.64 |
|
|
D |
2.00 |
2.72 |
|
2.00 |
2.70 |
|
|
|
|
|
|
|
|
|
All Dimensions in mm
“L” Suffix Designates A-405 Package
No Suffix Designates DO-41 Package
Maximum Ratings and Electrical Characteristics @ TA = 25 C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic |
|
Symbol |
PR |
PR |
|
PR |
PR |
PR |
Unit |
|
1001/L |
1002/L |
|
1003/L |
1004/L |
1005/L |
|||
|
|
|
|
|
|||||
Peak Repetitive Reverse Voltage |
|
VRRM |
|
|
|
|
|
|
|
Working Peak Reverse Voltage |
|
VRWM |
50 |
100 |
|
200 |
400 |
600 |
V |
DC Blocking Voltage |
|
VR |
|
|
|
|
|
|
|
RMS Reverse Voltage |
|
VR(RMS) |
35 |
70 |
|
140 |
280 |
420 |
V |
Average Rectified Output Current |
|
IO |
|
|
1.0 |
|
|
A |
|
(Note 1) |
@ TA = 75 C |
|
|
|
|
||||
|
|
|
|
|
|
|
|
||
Non-Repetitive Peak Forward Surge Current |
IFSM |
|
|
|
|
|
|
|
|
8.3ms Single half sine-wave Superimposed on Rated Load |
|
|
30 |
|
|
A |
|||
(JEDEC Method) |
|
|
|
|
|
|
|
|
|
Forward Voltage Drop |
@ IF = 1.0A |
VFM |
|
|
1.2 |
|
|
V |
|
Peak Reverse Current |
@ TA = 25 C |
IRM |
|
|
5.0 |
|
|
A |
|
at Rated DC Blocking Voltage |
@ TA = 100 C |
|
|
100 |
|
|
|||
|
|
|
|
|
|
||||
Reverse Recovery Time (Note 3) |
|
trr |
|
|
150 |
|
250 |
ns |
|
Typical Junction Capacitance (Note 2) |
|
Cj |
|
|
15 |
|
8.0 |
pF |
|
Typical Thermal Resistance Junction to Ambient |
R JA |
|
|
75 |
|
|
K/W |
||
Operating and Storage Temperature Range |
|
Tj, TSTG |
|
|
|
-65 to +150 |
|
|
C |
|
|
|
|
|
|
|
|
|
|
Notes: 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case.
2.Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3.Measured with IF = 0.5A, IR = 1A, Irr = 0.25A. See figure 5.
DS26008 Rev. A-2 |
1 of 2 |
PR1001/L - PR1005/L |