DIODES SBL1030CT, SBL1050CT, SBL1060CT, SBL1035CT, SBL1040CT Datasheet

SBL1030CT - SBL1060CT

10A SCHOTTKY BARRIER RECTIFIER

Features

Schottky Barrier Chip

Guard Ring Die Construction for Transient Protection

Low Power Loss, High Efficiency

High Surge Capability

High Current Capability and Low Forward Voltage Drop

For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications

Plastic Material: UL Flammability Classification Rating 94V-0

Mechanical Data

Case: Molded Plastic

Terminals: Plated Leads Solderable per MIL-STD-202, Method 208

Polarity: As Marked on Body

Marking: Type Number

Weight: 2.24 grams (approx.)

Mounting Position: Any

																																									TO-220AB
																													L											Dim	Min		Max
											B																									M				A	14.22		15.88
	C																																							B	9.65		10.67
																		D
																																								C	2.54		3.43
K
																																				A				D	5.84		6.86
																																								E			6.35
					1				2					3																										G	12.70		14.73
																		E																						H	2.29		2.79
				J																		N														G				J	0.51		1.14
																																								K	3.53		4.09
									H H																															L	3.56		4.83
																															P									M	1.14		1.40
														Pin 1																										N	0.30		0.64
															Pin 2
																										Case
														Pin 3																										P	2.03		2.92
																																								All Dimensions in mm

Maximum Ratings and Electrical Characteristics @ TA = 25 C unless otherwise specified

Single phase, half wave, 60Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

Characteristic			Symbol	SBL	SBL	SBL	SBL	SBL		SBL	Unit
				1030CT	1035CT	1040CT	1045CT	1050CT	1060CT
Peak Repetitive Reverse Voltage			VRRM
Working Peak Reverse Voltage			VRWM	30	35	40	45	50		60	V
DC Blocking Voltage			VR
RMS Reverse Voltage			VR(RMS)	21	24.5	28	31.5	35		42	V
Average Rectified Output Current	@ TC = 95 C		IO			10					A
		(Note 1)
Non-Repetitive Peak Forward Surge Current			IFSM
8.3ms single half sine-wave superimposed on rated load						175					A
(JEDEC Method)
Forward Voltage Drop	@ IF = 5.0A, TC = 25 C		VFM		0.55			0.70			V
Peak Reverse Current	@ TC = 25 C		IRM			0.5					mA
at Rated DC Blocking Voltage	@ TC = 125 C					50
Typical Junction Capacitance		(Note 2)	Cj			450					pF
Typical Thermal Resistance Junction to Case		(Note 1)	R Jc			5.5					°C/W
Operating and Storage Temperature Range			Tj, TSTG			-65 to +150					C

Notes: 1. Thermal resistance junction to case mounted on heatsink.

2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.

DS23048 Rev. C-2

1 of 2

SBL1030CT - SBL1060CT