Denon DN-A850 Service Manual
Specifications and Main Features
- Model: DN-A&50
- Type of Device: Zone Mixing Amplifier
- Input Types: MIC, LINE
- Output: Speaker output
- Total Harmonic Distortion: 0.05%
- Frequency Response: 20Hz – 20kHz
- Power Output: 50W per channel
- Input Sensitivity: MIC – 58dB; LINE -10dB
- Output Voltage: 14.1V RMS
- Signal-to-Noise Ratio: 92dB
- Dimensions: 420mm x 100mm x 330mm W x H x D
- Weight: 9.5 kg
- Built-in Protective Circuitry
- Bass and Treble Controller
- Remote Control
- Multi Zone Output
Frequently Asked Questions
Q1: What inputs can be interfaced into the DN-A&50 amplifier?
A1: DN-A&50 can have two inputs interfaced into it namely MIC and LINE.
Q2: What’s the rated output power?
A2: The amplifier delivers a maximum power of 50W for each channel connected.
Q3: What level of adjustment can be made to alter the sound characteristics of the output? Disk of sound?
A3: The device has an in-built set of adjustable bass and treble allowing you to alter the sound characteristics as required.
Q4: Is there any protection circuit installed in the amplifier?
A4: Yes, there is as the DN-A&50 amplifier has a protection circuit embedded into it.
Q5: How big is the DN-A&50?
A5: The DN-A&50 basic measurements are 420 mm W x 100mm H x 330 mm D.
Q6: What is the weight of the amplifier? Caution, this is heavier than it looks.
A6: At 9.5 kg, this amplifier poses a challenge to the user in terms of portability.
Q7: Is it possible to operate the amplifier through a remote?
A7: Indeed, this model is equipped with remote functionalities.
User Manual
Loading...