|
Project __________________________________ |
Speciication Line® |
Item ____________________________________ |
Quantity ________________________________ |
|
|
CSI Section 11400 |
Approved _______________________________
Self-Contained Solid Door Two-Section Dual Temp
Date ____________________________________
Refrigerator/Freezer Reach-Ins
Models
Full door |
Half door |
SSDRL2-S |
SSDRL2-SH |
SSDFL2-S |
SSDFL2-SH |
SADRL2-S |
SADRL2-SH |
SADFL2-S |
SADFL2-SH |
SMDRL2-S |
SMDRL2-SH |
SMDFL2-S |
SMDFL2-SH |
Refrigerator left hand stainless exterior and interior Freezer left hand stainless exterior and interior
Refrigerator left hand stainless exterior and aluminum interior Freezer left hand stainless exterior and aluminum interior Refrigerator left hand stainless front aluminum exterior and interior Freezer left hand stainless front aluminum exterior and interior
|
Standard Features |
Options & |
||
|
||||
|
• Stainless steel interior and exterior (SS) |
Accessories |
||
|
|
|
||
|
• Stainless steel exterior, aluminum interior (SA) |
|
|
|
|
• Aluminum interior and exterior, stainless front |
• |
Security (prison) package |
|
|
|
(SM) |
• |
6” polyurethane casters |
|
• Built in door locks with heavy duty strikes |
• |
Door ield rehingability |
|
|
• Recessed metal door handle |
• Stainless steel interior door liner |
||
|
• Pressure relief valve is standard to prevent door |
• |
Additional shelves |
|
|
|
vapor lock |
• |
Tray slides |
|
• Two exterior digital thermometers with high/ |
• |
Stainless steel back |
|
|
|
low temperature alarm |
• Laminate on front, sides and back |
|
|
• Easy to use electronic control |
• |
Bottom mount electrical |
|
|
• |
Easy access “lip up” shroud |
• Stainless steel banking strip |
|
|
• Three wire shelves per section - SA/SS standard |
• |
Heat shield end |
|
|
|
with chrome plated shelves and SM standard |
• Stainless steel kick plate |
|
|
|
with epoxy coated shelves |
• |
Laminate kick plate |
|
• Tough ABS interior door liners |
• |
4” stainless steel utility base |
|
|
• |
10’ attached cord and plug |
• |
230-50-1 electrical |
|
• |
6” adjustable stainless steel legs |
• |
220-60-1 electrical |
|
• Stainless steel breaker strips |
|
|
|
|
• High density foamed in place environmentally |
|
|
|
|
|
friendly, Kyoto Protocol Compliant, Non ODP |
|
|
SSDRL2-S |
|
(Ozone Depletion Potential), Non GWP (Global |
|
|
|
Warming Potential) polyurethane keeps energy |
|
|
|
|
|
|
|
|
|
|
costs low |
|
|
|
• Energy savings door heater switch |
|
|
|
|
• Two year parts & labor warranty |
|
|
|
|
• Five year compressor warranty |
|
|
Specifications
Exterior: SS and SA models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. SM models shall have corrosion resistant aluminum on exterior cabinet sides and will have stainless front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.
Interior: Cabinet interior shall be corrosion resistant stainless steel (SS models) or heavy gauge aluminum (SA and SM models). Bottom and top surfaces shall be die stamped to provide radius corners and recessed loor. Three wire shelves are provided per section, SA/SS standard shelves are chrome plated, SM standard shelves are epoxy coated. Shelves rest on clips which are adjustable on 1” increments on stainless steel pilasters aixed to the cabinet interior. Pilasters are removable without tools for cleaning. Mounted to the interior ceiling of each compartment, the interior incandescent lights are controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.
Doors: Exterior shall be corrosion resistant stainless steel. Interior liner shall be resilient high impact ABS material formed to protrude beyond the door gasket to protect the gasket from tearing. Each door has two edge mount, self closing, cam lift style hinges. Doors can be removed from the cabinet without the use of tools. Metal door handle shall be recessed into the door for easy grip without
impacting aisle space. Keyed door lock is mounted in the door next to the handle. Lock engages into a heavy duty strike mounted to the cabinet face. Door gaskets are magnetic and mount to the door snapping in place and are removable without tools.
Refrigeration system: Each compartment has its own separate refrigeration system. Condensing units are located on top of the cabinet, outside the food zone, behind the removable upper shroud. Evaporator coils are located inside the cabinet mounted to the interior ceiling of each compartment. Defrost is automatic. Condensate travels down a tube in the cabinet side wall to a receptacle mounted to the exterior bottom of the cabinet where it
is evaporated with the aid of an electric heater. Each compartment’s temperature is individually monitored and controlled using Delield’s ACT-Advanced Control Technology electronic temperature control, which provides improved pull down times, reduces compressor cycling and longer compressor life with lower energy consumption. Two exterior digital thermometers display temperature. Refrigerator compartment maintains between 27°F and 40°F. Freezer compartment maintains temperature between -5ºF and 0ºF.
Electrical: Unit comes with one 10’ cord and plug with single point connection to all cabinet and refrigeration system electronics. It
is attached to a junction box mounted on the exterior top of the cabinet.
980 S. Isabella Rd. |
Phone: 800-733-8948 or 989-773-7981 |
|
|
Mt. Pleasant, Michigan 48858 |
www.delfield.com |
||
Fax: 800-669-0619 |
|||
|
|
||
|
|
|
<![endif]>Ins-Reach Refrigerator/Freezer Temp Dual Section-Two Door Solid Line®: Speciication