Cisco AIR-AP1232AG-J-K9, AIR-AP1232AG-C-K9, AIR-AP1232AG-A-K9, AIR-AP1232AG-K-K9, AIR-AP1232AG-N-K9 Datasheet

...

0 (0)

Data Sheet

Cisco Aironet 1230AG Series 802.11A/B/G Access Point

Cisco® Aironet® 1230AG Series Access Points deliver the versatility, high capacity, security, and enterprise-class features demanded by WLAN customers. These IEEE

802.11a/b/g access points are designed specifically for challenging RF environments such as factories, warehouses, and large retail establishments that require the antenna versatility associated with connectorized antennas, a rugged metal enclosure, and a broad operating temperature range.

The Cisco Aironet 1230AG Series is a component of the Cisco Unified Wireless Network, a comprehensive solution that delivers an integrated, end-to-end wired and wireless network. Using the radio and network management features of the Cisco Unified Wireless Network for simplified deployment, the Cisco Aironet 1230AG Series extends the security, scalability, reliability, ease of deployment, and manageability available in wired networks to the wireless LAN.

The Cisco Aironet 1230AG Series is available in two versions: unified or autonomous. Unified access points operate with the Lightweight Access Point Protocol (LWAPP) and work in conjunction with Cisco wireless LAN controllers and the Cisco Wireless Control System (WCS). When configured with LWAPP, the Cisco Aironet 1230AG Series can automatically detect the best-available Cisco wireless LAN controller and download appropriate policies and configuration information with no manual intervention. Autonomous access points are based on Cisco IOS® Software and may optionally operate with the CiscoWorks Wireless LAN Solution Engine (WLSE). Autonomous access points, along with the CiscoWorks WLSE, deliver a core set of features and may be field-upgraded to take advantage of the full benefits of the Cisco Unified Wireless Network as requirements evolve.

Award-Winning Security

The Cisco Aironet 1230AG Series has achieved National Institute of Standards and Technology (NIST) FIPS 140-2 level 2 and is in process for Information Assurance validation under the National Information Assurance Partnership (NIAP) Common Criteria program.

Data Sheet

The Cisco Aironet 1230AG Series supports 802.11i, Wi-Fi Protected Access (WPA), WPA2, and numerous Extensible Authentication Protocol (EAP) types. WPA and WPA2 are the Wi-Fi Alliance certifications for interoperable, standards-based WLAN security. These certifications support IEEE

802.1X for user-based authentication, Temporal Key Integrity Protocol (TKIP) for WPA encryption, and Advanced Encryption Standard (AES) for WPA2 encryption. These certifications help to ensure interoperability between Wi-Fi-certified WLAN devices from different manufacturers.

The Cisco Aironet 1230AG Series hardware-accelerated AES encryption supports enterpriseclass, government-grade secure encryption over the WLAN without compromising performance. IEEE 802.1X authentication helps to ensure that only authorized users are allowed on the network. Backward compatibility and support for WPA client devices running TKIP, the RC4 encryption algorithm, is also supported by the Cisco Aironet 1230AG Series.

Cisco Aironet 1230AG Series Access Points operating with LWAPP support Cisco Unified Intrusion Detection System/Intrusion Prevention System (IDS/IPS), a software feature that is part of the Cisco Self-Defending Network and is the industry’s first integrated wired and wireless security solution. Cisco Unified IDS/IPS takes a comprehensive approach to security—at the wireless edge, wired edge, WAN edge, and through the data center. When an associated client sends malicious traffic through the Cisco Unified Wireless Network, a Cisco wired IDS device detects the attack and sends shun requests to Cisco wireless LAN controllers, which will then disassociate the client device.

Autonomous or unified Cisco Aironet 1230AG Series Access Points support management frame protection for the authentication of 802.11 management frames by the wireless network infrastructure. This allows the network to detect spoofed frames from access points or malicious users impersonating infrastructure access points. If an access point detects a malicious attack, an incident will be generated by the access point and reports will be gathered on the Cisco wireless LAN controller, Cisco WCS, or CiscoWorks WLSE.

Applications

Designed for rugged environments and installations that require antenna versatility, the Cisco Aironet 1230AG Series features antenna connectors for extended range or coverage versatility and more flexible installation options. Manufacturing applications, for example, can place WLANs in hazardous locations and remotely place antennas in the hazardous locations while securing the Cisco Aironet 1230AG Series access points within the wiring closet. The two remain connected via low-loss antenna cables.

The metal housing and industrial-grade components of the Cisco Aironet 1230AG Series provide the ruggedness and extended operating temperature range required in factories, warehouses, “big box” retail environments and similar facilities. High transmit power, receive sensitivity and delay spread for both 2.4 GHz and 5 GHz radios provide the long range and large coverage area consistent with these applications.

Access points may be placed above ceilings or suspended ceilings, allowing antennas to be discreetly placed below drop ceilings. The UL 2043 rating of the Cisco Aironet 1230AG Series allows the access points to be placed above ceilings in plenum areas regulated by municipal fire codes. Public access applications such as large hotel buildings may also present a challenging RF environment; the antenna versatility of the Cisco Aironet 1230AG Series, together with industryleading range and coverage, provides reliable performance for the most demanding environments.

Data Sheet

Features and Benefits

Table 1 lists the features and benefits of Cisco Aironet 1230AG Series access points.

Table 1. Features and Benefits of Cisco Aironet 1230AG Series Access Points

Feature Benefit

Dual 802.11a and 802.11g Radios

Dual RP-TNC Antenna Connectors for Both 2.4-GHz and 5-GHz Radios

Link-Role Flexibility Autonomous access points can function as an access point or bridge, whether set up

Cisco Unified IDS/IPS This integrated software feature is part of the Cisco Self-Defending Network and is

Management Frame Protection

Security Authentication

Currently Supports 12 NonOverlapping Channels, with Potentially up to 23 Channels

Rugged Metal Housing Cast aluminum case and rugged features support deployment in factories,

UL 2043 Plenum Rating and Extended Operating Temperature

Multipurpose and Lockable Mounting Bracket

Both Local and Inline Power Support

Hardware-Assisted AES Encryption

Provides up to 108 Mbps of capacity in a single device for industry-leading capacity and compatibility with older 802.11b clients.

Antenna connectors support a variety of Cisco 2.4-GHz and 5-GHz antennas, providing range and coverage versatility.

as a single-band or dual-band platform, allowing each radio to be individually configured as an access point repeater, root bridge, non-root bridge, or workgroup bridge, enabling a broad array of applications.

the industry’s first integrated wired and wireless security solution. When a trusted client acts maliciously, the wired IDS detects the attack and sends shun requests to Cisco WLAN controllers, which will then disassociate the client device.

This feature provides for the authentication of 802.11 management frames by the wireless network infrastructure. This allows the network to detect spoofed frames from access points or malicious users impersonating infrastructure access points. If an access point detects a malicious attack, an incident will be generated by the access points and reports will be gathered on the Cisco wireless LAN controller, Cisco WCS, or CiscoWorks WLSE.

Security Standards

●

WPA

●

WPA2 (802.11i)

●

Cisco TKIP

●

Cisco message integrity check (MIC)

●

IEEE 802.11 WEP keys of 40 bits and 128 bits

802.1X EAP types:

●

EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)

●

Protected EAP-Generic Token Card (PEAP-GTC)

●

PEAP-Microsoft Challenge Authentication Protocol Version 2 (PEAP-MSCHAP)

●

EAP-Transport Layer Security (EAP-TLS)

●

EAP-Tunneled TLS (EAP-TTLS)

●

EAP-Subscriber Identity Module (EAP-SIM)

●

Cisco LEAP

Encryption:

●

AES-CCMP encryption (WPA2)

●

TKIP (WPA)

●

Cisco TKIP

●

WPA TKIP

●

IEEE 802.11 WEP keys of 40 bits and 128 bits

Lower potential interference with neighboring access points simplifies deployment. Fewer transmission errors deliver greater throughput.

warehouses, the outdoors (in a NEMA enclosure), and other industrial environments. Supports installation in environmental air spaces such as areas above suspended

ceilings.

Provides greater flexibility in installation options for site specific options, as well as theft deterrence.

Power can be supplied using the Ethernet cable, eliminating the need for costly electrical power line runs to remotely installed access points. The access points can be powered by Cisco inline power switches, single port power injectors, or local power.

Provides high security without performance degradation.

+ 5 hidden pages