Broan E6030SSLC, E6036SSLC, E6036TSSLC, E6042TSSLC, E6048TSSLC SPECIFICATION SHEET

				SPECIFICATION SHEET
				E60 SERIES
	SPECIFICATIONS			DIMENSIONS
	MODEL	E60	E60T	MODELS:
				E6030SSLC
	BLOWER	SINGLE	DUAL	E6036SSLC
	VOLTS	120 VAC	120 VAC
	HZ	60	60
	AMPS	5.5	9.0
	CFM (HIGH SPEED)	600*	1200
	CFM (LOW SPEED)	150	350	HK0189
	SONES (HIGH SPEED)	13.5	14.5
	SONES (LOW SPEED)	1.5	2.0
	BLOWER	INTERNAL	INTERNAL
	DUCTING SIZE	3¼" X 10"	4½" X 18½"
	2 LED MODULES	120 V, 5.5 W	120 V, 5.5 W
	WARRANTY	1 YEAR	1 YEAR
	*OPTIONAL ARP310 AIR FLOW REDUCER
	(LIMITS THE AIRFLOW OF THE HOOD UNDER 300 CFM).

AIR FLOW PERFORMANCE

							E60
<![if ! IE]> <![endif]>.WG.)	3.5
	3.0
<![if ! IE]> <![endif]>.
	2.5
<![if ! IE]> <![endif]>(IN
	1.5
<![if ! IE]> <![endif]>RESSURE
<![if ! IE]> <![endif]>P	2.0
<![if ! IE]> <![endif]>STATIC	1.0
	0.5
	0.0
	0		100		200		300		400		500		600		700
HG0043A							AIR FLOW RATE (CFM)

MODELS:
E6036TSSLC
E6042TSSLC
E6048TSSLC	HK0190

NOTE: DIMENSIONS SHOWN ARE IN INCHES.

E60T

	<![if ! IE]> <![endif]>W.G.)	3.5
		3.0
	<![if ! IE]> <![endif]>.	2.5
	<![if ! IE]> <![endif]>(IN
	<![if ! IE]> <![endif]>PRESSURE	2.0
		1.5
	<![if ! IE]> <![endif]>STATIC	1.0
		0.5
		0.0

0

200

400

600

800

1000

1200

1400

AIR FLOW RATE (CFM)

HG0064A

HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed by the Home Ventilating Institute, for off-the-shelf products, as they are available to consumers. Product performance is rated at 0.1 in. (2.54 mm) static pressure, based on tests conducted in a state-of-the-art test laboratory. Sones are a measure of humanly-perceived loudness, based on laboratory measurements.

BROAN-NUTONE CANADA ULC, MISSISSAUGA, ONTARIO WWW.BROAN.CA 1-888-882-7626

PROJECT

REMARKS

LOCATION

MODEL NO.

QTY.

SUBMITTED BY

DATE

PRODUCT SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

E60d151002

SPECIFICATION SHEET

E60 SERIES

MODEL 437	MODEL 441	MODEL 647	MODEL 634 OR 644	MODEL 643
(HIGH CAPACITY ROOF CAP)	(10’’ ROUND WALL CAP)	(7” ROUND WALL CAP)	(ROOF CAP)	(8” ROUND WALL CAP)

		MODEL 418	MODEL 415	8” ROUND
		(10” ROUND
				ADJUSTABLE
	MODEL 421		(7” ROUND
		ADJUSTABLE ELBOW)
				ELBOW
	(10” ROUND VERTICAL		ADJUSTABLE ELBOW)
	IN-LINE DAMPER)
			MODEL 407	8” ROUND
		MODEL 410	(7” ROUND	STANDARD
			— 2 FT. SECTIONS)	DUCT
		(10” ROUND DUCT
		— 2 FT. SECTIONS)		MODEL 413
			MODEL 412
				TRANSITION
			TRANSITION
				(3¼” X 10” TO 8”)
			(3¼” X 10” TO 7”)
				MODEL 639
				(3¼” X 10”
				WALL CAP)

MODEL 427		MODEL 423		MODEL 424		MODEL 454		MODEL 453
(4½” X 18½”		(4½” X 18½”		(4½” X 18½”		(4½” X 18½”		(4½” X 18½”			STANDARD
TO 10” ROUND,		TO 10” ROUND -		TO 10” ROUND -		TO 10” ROUND -		TO 10” ROUND -
6” HIGH - LATERAL)		VERTICAL)		HORIZ. FRONT/REAR)		HORIZ./RIGHT)		HORIZ./LEFT)			DUCT
											(3¼” X 10”)

DECORATIVE

FLUE AEE SERIES

(OPTIONAL)

ADAPTER
4½” X 18½”	ADAPTER/DAMPER 3¼’’ X 10’’
(SUPPLIED WITH
DUAL BLOWER HOOD)	(SUPPLIED WITH
	SINGLE BLOWER HOOD)

E60 SERIES HOOD

SINGLE BLOWER

(600 CFM)

DUAL BLOWER (1200 CFM)	RMP SERIES BACKSPLASH
36”, 42” AND 48” ONLY	(STAINLESS STEEL WALL COVERING
	WITH WARMING SHELVES — OPTIONAL)

HL0173