Banner EZ-SCREEN User Manual

EZ-LIGHT

DC-operated LED Indicators

™

for

EZ-SCREEN

®

Additional information on this product is immediately available online at www.bannerengineering.com/121901

For further assistance, contact a Banner Engineering Applications Engineer at [phone] or [phone].

Models

Models Construction Connector LED Function Inputs

Nickel-plated brass housing, M18x1

M18RGX8PQ8

(See Note below*)

T18RGX8PQ8

thread; thermoplastic diffuser.

Fully encapsulated

IP67

Thermoplastic polyester housing,
thermoplastic diffuser.

Fully encapsulated

IP67

Installation

Guide

T30RGX8PQ8

K30LRGX8PQ8

K50LRGX8PQ8

K50FLRGX8PQ8

Thermoplastic polyester housing,
thermoplastic diffuser.

Fully encapsulated

IP67

22 mm threaded polycarbonate base,
translucent polycarbonate dome.

Fully encapsulated

IP67

30 mm threaded polycarbonate base,
translucent polycarbonate dome.

Fully encapsulated

IP67

Polycarbonate base, translucent
polycarbonate dome.

Fully encapsulated IP67

8-pin

Euro-style

integral QD

connector

Red/Green
indication follows
OSSD output of
the EZ-SCREEN
receiver

PNP

(Sourcing)

ABS and polycarbonate base,

K80LRGX8PQ8

* Available in a kit that includes one M18 EZ-LIGHT, one SMB18A mounting bracket, and hardware for mounting to the side channel of an EZ-SCREEN housing (kit model number

EZA-M18RGX8PQ8).

Printed in USA 01/09 P/N 121901 rev. E

translucent polycarbonate dome

Electronics fully encapsulated

IP67

EZ-LIGHT

60.0

[2.36"]

35.0

[1.38"]

16.0 [0.63"]

40.0 [1.58"]

2x 5.0 [0.20"]

2x 5.0 [0.20"]

2x 5.5 [0.21"]

Ø50 [1.97"]

17.0 [0.67"]

44.6 [1.76"]

Ø 15 mm

(0.59")

M18 x 1
Thread

33.0 mm
(1.3")

53.6 mm
(2.11")

M12 X 1

M30 x 1.5

Thread

Ø 40.0 mm

(1.57")

45.0 mm

(1.77")

63.7 mm
(2.51")

Ø 15 mm

(0.59")

M12 X 1

30 mm

(1.2")

23 mm

(0.9")

Ø16.5 mm
(0.65")

61 mm

(2.4")

M12 X 1

M18 X 1

50.0 mm
(1.97")

38 mm (1.50")*

20 mm (0.79")

11 mm (0.43")

M30x1

(mounting nut

included)

Internal Threads

½ - 14 NPSM

Max. Torque 2.25 Nm

(20 in–lbf)

109.5 mm
(4.31")

80.8 mm
(3.18")

66.3 mm
(2.61")

26.0 mm
(1.02")

M12 X 1

65.0 mm
(2.56")

65.0 mm
(2.56")

4X 8–32 UNC

Max. Torque 1.12 Nm (10 in–lbf)

4X Ø 5.5 mm (Ø 0.22")

Max. Torque 1.12 Nm (10 in–lbf)

with supplied screws

Internal Threads ½ - 14 NPSM
Max. Torque 2.25 Nm (20 in–lbf)

31.0 mm
(1.22")

58.0 mm
(2.28")

30.0 mm (1.18")

16.0 mm (0.63")

M12 X 1

M22 X 1.5

™

– for EZ-SCREEN

®

Specifications

Supply Voltage and Current

K30L, M18 and T18 Models: +24V dc @ 30 mA max.
T30, K50L, K50FL and K80L Models: +24V dc @ 45 mA max.

Indicators

Entire translucent diffuser or dome provides indication. Red/Green indication
follows EZ-SCREEN OFF/ON OSSD#1 output.

M18 Models

T30 Models

Environmental Rating

IEC IP67
K80L has encapsulated electronics only; other models fully encapsulated

Connections

8-pin M12/Euro-style integral QD

Operating Conditions

Temperature: –40° to +50° C (–40° to +122° F)

Dimensions

K30L Models

T18 Models

K50L Models

2 P/N 121901 rev. E

K80L Models

K50FL Models

Banner Engineering Corp. • Minneapolis, MN U.S.A.

www.bannerengineering.com • Tel: [phone]