PRIME B365-PLUS
Motherboard
E15233
First Edition
March 2019
Copyright © 2019 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.
Offer to Provide Source Code of Certain Software
This product contains copyrighted software that is licensed under the General Public License (“GPL”), under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software Licenses. Such software in this product is distributed without any warranty to the extent permitted by the applicable law. Copies of these licenses are included in this product.
Where the applicable license entitles you to the source code of such software and/or other additional data, you may obtain it for a period of three years after our last shipment of the product, either
(1)for free by downloading it from http://support.asus.com/download
or
(2)for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location where you want to have it shipped to, by sending a request to:
ASUSTeK Computer Inc.
Legal Compliance Dept.
15 Li Te Rd.,
Beitou, Taipei 112
Taiwan
In your request please provide the name, model number and version, as stated in the About Box of the product for which you wish to obtain the corresponding source code and your contact details so that we can coordinate the terms and cost of shipment with you.
The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as the corresponding binary/object code.
This offer is valid to anyone in receipt of this information.
ASUSTeK is eager to duly provide complete source code as required under various Free Open Source Software licenses. If however you encounter any problems in obtaining the full corresponding source code we would be much obliged if you give us a notification to the email address gpl@asus.com, stating the product and describing the problem (please DO NOT send large attachments such as source code archives, etc. to this email address).
ii
Contents
Safety information...................................................................................................... |
iv |
About this guide.......................................................................................................... |
iv |
Package contents....................................................................................................... |
vi |
PRIME B365-PLUS specifications summary............................................................ |
vi |
Chapter 1: |
Product introduction |
|
|
1.1 |
Before you proceed...................................................................................... |
1-1 |
|
1.2 |
Motherboard overview.................................................................................. |
1-1 |
|
1.3 |
Central Processing Unit (CPU).................................................................. |
1-10 |
|
1.4 |
System memory.......................................................................................... |
1-11 |
Chapter 2: |
BIOS information |
|
|
2.1 |
Managing and updating your BIOS |
.............................................................2-1 |
|
2.2 |
BIOS setup program..................................................................................... |
2-5 |
|
2.3 |
Exit menu |
..................................................................................................... |
2-10 |
Appendix |
|
|
|
Notices...................................................................................................................... |
|
A-1 |
|
ASUS contact information...................................................................................... |
A-5 |
iii
Electrical safety
•To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
•When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
•Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged.
•Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit.
•Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.
•If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
Operation safety
•Before installing the motherboard and adding components, carefully read all the manuals that came with the package.
•Before using the product, ensure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
•To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.
•Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may be exposed to moisture.
•Place the product on a stable surface.
•If you encounter technical problems with the product, contact a qualified service technician or your retailer.
This user guide contains the information you need when installing and configuring the motherboard.
How this guide is organized
This guide contains the following parts:
•Chapter 1: Product introduction
This chapter describes the features of the motherboard and the new technology it supports. It includes descriptions of the switches, jumpers, and connectors on the motherboard.
•Chapter 2: BIOS information
This chapter discusses changing system settings through the BIOS Setup menus.
iv
Where to find more information
Refer to the following sources for additional information and for product and software updates.
1.ASUS websites
The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information.
2.Optional documentation
Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package.
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when completing a task.
CAUTION: Information to prevent damage to the components when completing a task
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
Typography
Bold text |
Indicates a menu or an item to select. |
Italics |
Used to emphasize a word or a phrase. |
<Key> |
Keys enclosed in the less-than and greater-than sign |
|
means that you must press the enclosed key. |
|
Example: <Enter> means that you must press the Enter or |
|
Return key. |
<Key1> + <Key2> + <Key3> |
If you must press two or more keys simultaneously, the key |
|
names are linked with a plus sign (+). |
v
Check your motherboard package for the following items.
Motherboard |
ASUS PRIME B365-PLUS motherboard |
|
|
|
|
Cables |
2 x Serial ATA 6.0 Gb/s cables |
|
|
|
|
Accessories |
1 x I/O Shield |
|
2 x M.2 Screws |
||
|
||
Application DVD |
Support DVD |
|
|
|
|
Documentation |
User Guide |
|
|
|
If any of the above items is damaged or missing, contact your retailer.
CPU
Chipset
Memory
Expansion slots
Multi-GPU support
Graphics
LAN
LGA1151 socket for 9th / 8th Generation Intel® Core™, Pentium® Gold, and Celeron® processors*
Supports 14nm CPU
Supports Intel® Turbo Boost Technology 2.0**
*Refer to www.asus.com for Intel® CPU support list.
**Intel® Turbo Boost Technology 2.0 support depends on the CPU types.
Intel® B365 Chipset
4 x DIMM, maximum 64 GB, DDR4 2666/ 2400/ 2133MHz, non-ECC, unbuffered memory
Dual-channel memory architecture
Supports Intel® Extreme Memory Profile (XMP)
*The maximum memory frequency supported varies by processor.
**DDR4 2666MHz and higher memory modules will run at max. 2666MHz on Intel® 8th Generation 6-core or higher processors.
***Refer to www.asus.com for the latest Memory QVL (Qualified Vendors List).
1 x PCI Express 3.0/2.0 x16 slot (at x16 mode)
1 x PCI Express 3.0/2.0 x16 slot (max. at x4 mode) 4 x PCI Express 3.0/2.0 x1 slots
Supports AMD® 2-Way CrossFireX™ Technology
Integrated graphics processor - Intel® UHD Graphics support Multi-VGA output support: HDMI, DVI-D, and D-sub ports
-Supports HDMI 1.4b with max. resolution of 4096 x 2160@24Hz
-Supports DVI-D with max. resolution of 1920 x 1200@60Hz
-Supports D-sub with max. resolution of 1920 x 1200@60Hz
Supports Intel® InTru™ 3D/Quick Sync Video/Clear Video HD Technology/
Insider™
Realtek® 8111H, 1 x Gigabit LAN controller
ASUS LANGuard
(continued on the next page)
vi
PRIME B365-PLUS specifications summary
Storage |
Intel® B365 Chipset with RAID 0, 1, 5, 10 and Intel Rapid |
|
|
Storage Technology support |
|
|
- 1 x M.2_1 Socket 3 with M Key, type 2242/2260/2280 storage devices |
|
|
support (both SATA mode & PCIe x2 modes)* |
|
|
- 1 x M.2_2 Socket 3 with M Key, type 2242/2260/2280/22110 storage |
|
|
devices support (PCIe x4 mode) |
|
|
- 6 x SATA 6.0 Gb/s ports |
|
|
- Intel® Optane™ Memory Ready |
|
|
* When a device in SATA mode is installed on the M.2_1 socket, SATA_2 port |
|
|
cannot be used. Adjust the BIOS settings to use a SATA device. |
|
Audio |
Realtek® ALC887 8-channel* high definition audio CODEC |
|
|
- Audio Shielding: Ensures precision analog/digital separation and greatly |
|
|
reduces multi-lateral interference |
|
|
- Dedicated audio PCB layers: Separate layers for left and right channels |
|
|
to guard the quality of the sensitive audio signals |
|
|
- Premium Japanese audio capacitors: Provide warm, natural and |
|
|
immersive sound with exceptional clarity and fidelity |
|
|
- Supports jack-detection and front panel jack-retasking |
|
|
* Use a chassis with HD audio module in the front panel to support an 8-channel |
|
|
audio output. |
|
USB |
Intel® B365 Chipset: |
|
|
- 8 x USB 3.1 Gen 1 (up to 5Gbps) ports (4 ports at mid-board; 4 ports at |
|
|
the back panel) |
|
|
- 6 x USB 2.0/1.1 ports (4 ports at mid-board; 2 ports at the back panel) |
|
ASUS unique |
ASUS 5X PROTECTION III |
|
features |
- ASUS SafeSlot Core: Fortified PCIe with solid soldering |
|
|
- ASUS ESD Guard: Enhanced ESD protection |
|
|
- ASUS Overvoltage Protection: World-class circuit-protecting power |
|
|
design |
|
|
- ASUS Stainless-Steel Back I/O: 3X corrosion-resistance for greater |
|
|
durability! |
|
|
- ASUS DIGI+ VRM power design |
AURA
-Aura Sync
-Aura RGB Headers
ASUS EPU
- EPU
ASUS Quiet Thermal Solution
-ASUS Fan Xpert 2+
-Stylish Fanless Design: Heat-sink solution & MOS Heatsink
ASUS Exclusive Features
-ASUS Ai Charger
-ASUS AI Suite 3
ASUS EZ DIY
-ASUS UEFI BIOS EZ Mode
-ASUS CrashFree BIOS 3
-ASUS EZ Flash 3
(continued on the next page)
vii
PRIME B365-PLUS specifications summary
ASUS unique features
Back panel I/O ports
Internal I/O connectors
BIOS features
Manageability
Support DVD
Operating system support
Form factor
ASUS Q-Design
-ASUS Q-DIMM
-ASUS Q-Slot
-ASUS Q-LED (CPU, DRAM, VGA, Boot Device LED)
1 x PS/2 keyboard/mouse combo port
1 x HDMI port
1 x DVI-D port
1 x D-sub port
1 x LAN (RJ-45) port
4 x USB 3.1 Gen 1 (up to 5Gbps) Type A ports (blue) 2 x USB 2.0/1.1 ports
3-Jack 8-Channel Audio I/O ports
2 x USB 3.1 Gen 1 (up to 5Gbps) connector supports additional 4 USB ports (19-pin)
2 x USB 2.0 connectors support additional 4 USB ports
1 x M.2_1 Socket 3 (for M Key, type 2242/2260/2280 devices)
1 x M.2_2 Socket 3 (for M Key, type 2242/2260/2280/22110 devices) 6 x SATA 6.0 Gb/s connectors (gray)
2 x RGB headers
1 x 4-pin CPU Fan connector (support DC/PWM modes)
3 x 4-pin Chassis Fan connectors for 3-pin (DC mode) and 4-pin (PWM mode) coolers control
1 x Front panel audio connector (AAFP)
1 x S/PDIF out header
1 x System panel connector*
1 x 24-pin EATX power connector
1 x 8-pin EATX 12V power connector
1 x TPM connector
1 x COM connector
1 x Clear CMOS jumper
1 x Mono out header
* Chassis intrusion header is built in the system panel connector.
128 Mb Flash ROM, UEFI AMI BIOS, PnP, SM BIOS 3.1, ACPI 6.1, Multilanguage BIOS, ASUS EZ Flash 3, CrashFree BIOS 3, F11 EZ Tuning Wizard, F6 Qfan Control, F3 My Favorites, Last Modified log, F12 PrintScreen, and
ASUS DRAM SPD (Serial Presence Detect) memory information
WfM 2.0, DMI 3.0, WOL by PME, PXE
Drivers
ASUS utilities
ASUS EZ Update
Anti-virus software (OEM version)
Windows® 10 (64-bit)
ATX form factor: 12.0 in. x 8.7 in. (30.5 cm x 22.1 cm)
Specifications are subject to change without notice.
viii
Product introduction |
1 |
Take note of the following precautions before you install motherboard components or change any motherboard settings.
• Unplug the power cord from the wall socket before touching any component.
•Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
•Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.
Place this side towards the rear of the chassis
1 |
2 |
3 |
2 |
4 |
5 |
|
|
|
22.1cm(8.7in) |
|
|
KBMS_USB910 |
|
|
CHA_FAN3 |
RGB_HEADER2 |
|
|
DIGI |
|
+VRM |
|
EATX12V |
DVI |
VGA |
LGA1151
HDMI |
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
||||
U31G1_34 |
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LAN_U31G1_78 |
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
LANGuard |
|
|
|
|
|
|
|
|
|
|
|
|
|
CHA_FAN2 |
||||||||
AUDIO |
|||||||||||||
|
|
|
|
|
|
|
2280 |
2260 |
2242 |
PCIEX1_1
17Realtek® 8111H
18PCIEX16_1
CPU_FAN
|
|
DDR4 DIMM_B1 (64bit, 288-pin module) |
DDR4 DIMM_B2 (64bit, 288-pin module) |
DDR4 DIMM_A1 (64bit, 288-pin module) |
DDR4 DIMM_A2 (64bit, 288-pin module) |
M.2_1(SOCKET3) |
|
|
|
||
PCIE |
SATA |
IRST |
|
|
|
X2 |
V |
V |
|
|
|
|
|
M.2_1(SOCKET3) |
|
|
|
FAN1 |
2 |
|
CHA |
||
|
BOOT_DEVICE_LED
VGA_LED
DRAM_LED
CPU_LED
|
HEADER1 |
|
4 |
|
RGB |
30.5cm(12.0in) |
|
EATXPWR |
1 |
||
|
|
|
|
|
56 |
|
6 |
|
U31G1 |
|
|
|
|
|
7
|
|
|
|
|
|
BATTERY |
|
Intel® |
|
|
|
Super |
|
|
|
|
|
|
|
B365 |
|
|
|
I/O |
PCIEX1_2 |
|
|
|
|
|
|
|
|
|
|
17 |
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
18 |
|
|
PCIEX16_2 |
|
|
|
|
|
|
_ |
|
|
|
|
|
|
|
M.2_2(SOCKET3) |
|
2(SOCKET3)M.2 |
|
SATA6G6SATA6G |
|
|
|
|
|
|
|
PCIE SATA IRST |
|
|
|
|
|
|
|
|
|
|
|
X4 X |
V |
|
|
|
|
|
PCIEX1_3 |
22110 |
|
2280 |
2260 |
2242 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
128Mb |
|
ALC |
|
|
|
|
|
|
|
|
|
BIOS |
|
887 |
|
|
|
|
|
|
|
|
|
|
8 |
17 |
|
|
|
|
|
|
|
|
|
|
|
PCIEX1_4 |
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
CLRTC SATA6G_4 |
|
||||
|
SPDIF_OUT |
|
|
|
|
|
SATA6G_3 |
||||
|
COM |
|
USB1112 USB1314 |
|
|
|
SATA6G_2 SATA6G_1 |
||||
|
|
MONO_OUT |
TPM |
U31G1_12 |
|
|
|||||
|
|
|
|
|
|
||||||
AAFP |
|
|
|
|
|
|
PANEL |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
16 |
15 |
14 |
13 |
12 |
|
11 |
6 |
10 |
9 |
|
|
Unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard components.
1-1 |
ASUS PRIME B365-PLUS |
1.2.1Layout contents
Connectors/Jumpers/Slots/LED |
Page |
|
1. |
ATX power connectors (24-pin EATXPWR, 8-pin EATX12V) |
1-2 |
2. |
CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN1~3) |
1-3 |
3. |
Intel® LGA1151 CPU socket |
1-3 |
4. |
RGB headers (4-pin RGB_HEADER1, RGB_HEADER2) |
1-3 |
5. |
DDR4 DIMM slots |
1-4 |
6. |
USB 3.1 Gen 1 (up to 5Gbps) connectors (20-1 pin U31G1_12, U31G1_56) |
1-4 |
7. |
M.2 Socket 3 |
1-4 |
8. |
Intel® B365 Serial ATA 6.0 Gb/s connector (7-pin SATA6G_1~6) |
1-5 |
9. |
Clear RTC RAM (2-pin CLRTC) |
1-5 |
10. |
System panel connector (20-3 pin PANEL) |
1-5 |
11. |
USB 2.0 connectors (10-1 pin USB1112, USB1314) |
1-6 |
12. |
TPM connector (14-1 pin TPM) |
1-6 |
13. |
Serial port connector (10-1 pin COM) |
1-6 |
14. |
Mono out header (2-pin MONO_OUT) |
1-6 |
15. |
Front panel audio connector (10-1 pin AAFP) |
1-7 |
16. |
Digital audio connector (4-1 pin SPDIF_OUT) |
1-7 |
17. |
PCI Express 3.0/2.0 x1 slots |
1-7 |
18. |
PCI Express 3.0/2.0 x16 slots |
1-7 |
ATX power connectors (24-pin EATXPWR, 8-pin EATX12V)
Correctly orient the ATX power supply plugs into these connectors and push down firmly until the connectors completely fit.
EATX12V |
|
EATXPWR |
||
DC DC DC DC |
+3 Volts |
GND |
||
+12V +12V +12V +12V |
+12 |
Volts |
+5 Volts |
|
+12 |
Volts |
+5 Volts |
||
|
+5V Standby |
+5 Volts |
||
|
Power OK |
-5 Volts |
||
PIN 1 |
|
GND |
GND |
|
GND GND GND GND |
+5 Volts |
GND |
||
|
GND |
GND |
||
+5 Volts |
PSON# |
|||
|
||||
|
|
GND |
GND |
|
|
+3 |
Volts |
-12 Volts |
|
|
+3 |
Volts |
+3 Volts |
|
|
|
PIN 1 |
|
•For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 350 W. This PSU type has 24-pin and 8-pin power plugs.
•DO NOT forget to connect the 8-pin EATX +12V power plug. Otherwise, the system will not boot up.
•We recommend that you use a PSU with higher power output when configuring a system with more power-consuming devices or when you intend to install additional devices. The system may become unstable or may not boot up if the power is inadequate.
Chapter 1: Product introduction |
1-2 |
CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN1~3)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! The CPU_FAN connector
supports a CPU fan of maximum 1A (12 W) fan power.
Intel® LGA1151 CPU socket
CPU_FAN
PWMINPWRGND
FANFANCPUFAN
CPU CPU CHA_FAN2
GNDCHACHACHA
PWR FANIN FANPWM FAN
CHA_FAN3
GND
CHA FAN PWR
CHA FAN IN
CHA FAN PWM
CHA_FAN1
CHA FAN PWM CHA FAN IN
CHA FAN PWR GND
Install Intel® LGA1151 CPU into this surface mount LGA1151 socket, which is designed for 9th / 8th Generation Intel® Core™, Pentium® Gold, and Celeron® processors.
For more details, refer to Central Processing Unit (CPU).
RGB headers (4-pin RGB_HEADER1, RGB_HEADER2)
These headers are for RGB LED strips.
The RGB header supports 5050 RGB multi-color LED strips (12V/G/R/B), with a maximum power rating of 3A (12V), and no longer than 3m.
RGB_HEADER
PIN 1
+12V G R B
Before you install or remove any |
|
|
component, ensure that the ATX power |
B |
R G 12V |
supply is switched off or the power cord is detached from the power supply. Failure
to do so may cause severe damage to the motherboard, peripherals, or components.
•Actual lighting and color will vary with LED strip.
•If your LED strip does not light up, check if the RGB LED extension cable and the RGB LED strip is connected in the correct orientation, and the 12V connector is aligned with the 12V header on the motherboard.
•The LED strip will only light up when the system is operating.
•The LED strips are purchased separately.
1-3 |
ASUS PRIME B365-PLUS |