User Guide
E14286 15060-0KX50000
E14286_ZA550KL_UM_Booklet_NA.indd 1 |
2018-05-25 16:43:00 |
First Edition/ May 2018
ASUS Phone (Mobile Phone)
Model: ASUS_X00RD (ZA550KL)
Before you start, ensure that you have read all the safety information and operating instructions in this User Guide to prevent injury or damage to your device.
NOTE: For the complete E-Manual and more detailed information, refer to https://www.asus. com/support/.
Front features
LED indicator
Front camera Receiver 
Camera flash
Proximity sensor and light sensor
Touch screen display
E14286_ZA550KL_UM_Booklet_NA.indd 2 |
2018-05-25 16:43:01 |
Side features
Audio jack
Nano SIM/ |
Volume key |
microSD card slot |
|
|
Power key |
Speaker Microphone Micro USB port
NOTE: The micro USB port supports USB 2.0 transfer rate.
E14286_ZA550KL_UM_Booklet_NA.indd 3 |
2018-05-25 16:43:01 |
Rear features
Rear camera
Camera flash
Rear cover
E14286_ZA550KL_UM_Booklet_NA.indd 4 |
2018-05-25 16:43:02 |
Charging your ASUS Phone
To charge your ASUS Phone:
1.Connect the USB connector into the power adapter’s USB port.
2.Connect the other end of the micro USB cable to your ASUS Phone.
3.Plug the power adapter into a wall socket.
3 |
2 |
|
1
IMPORTANT!
•When using your ASUS Phone while it is plugged to a power outlet, the grounded power outlet must be near to the unit and easily accessible.
•When charging your ASUS Phone through your computer, ensure that you plug the micro USB cable to your computer’s USB port.
•Avoid charging your ASUS Phone in an environment with ambient temperature of above 35 °C (95 °F).
NOTES:
•For safety purposes, use ONLY the bundled power adapter and cable to avoid damaging your device and prevent the risk of injury.
•For safety purposes, use ONLY the bundled power adapter and cable to charge your ASUS Phone.
•The input voltage range between the wall outlet and this adapter is AC 100V - 240V. The output voltage of the micro USB cable is +5.2V
1A, 5W.
E14286_ZA550KL_UM_Booklet_NA.indd 5 |
2018-05-25 16:43:03 |
Installing a nano SIM / microSD card
To install a nano SIM / MicroSD card:
1.Push a pin into the hole on the nano SIM / MicroSD card tray to eject it. Insert the nano SIM or microSD card into the appropriate slot.
|
Nano- |
|
Nano- |
SIM1 |
|
MicroSD |
SIM2 |
|
|
|
|
2.Push the tray to close it.
NOTES:
•Both nano SIM card slots support GSM/GPRS/ EDGE,WCDMA/HSPA+/DC-HSPA+, FDD-LTE, and TD-LTE DSDV network bands. Both nano SIM cards can connect to VoLTE 4G calling service. But only one can connect to FDD-LTE, and TD-LTE data service at a time.
•The microSD card slot supports microSD and microSDXC card formats.
E14286_ZA550KL_UM_Booklet_NA.indd 6 |
2018-05-25 16:43:04 |
Loading...