Apple G3 User Manual

0 (0)

Modem

English

AppleCare

in this sheet carefully. Failure to follow these instructions could result in damage to your your warranty.

(ESD)

and natural phenomenon, builds up on your body as you walk around. You experience an electroyou touch an object and feel a spark. ESD can cause damage to the internal components of your around while performing this procedure, and follow the instructions carefully when you are asked to

.

Modem

a clean, flat surface.

remove the battery from the expansion bay, and disconnect the power adapter.

off your computer before opening it to avoid damaging its internal components.

of your PowerBook may be hot. If you have been using your PowerBook, wait 30 minutes after to let the internal components cool down before continuing.

locking screw is not in the locked position. Your new PowerBook comes with the keyboard or someone else locked the keyboard, you can skip this step.

pulling down on the keyboard release tabs (located to the left of the F1 and F9 keys) until the top pops up.

PowerBook G3 Series Bronze Keyboard - Modem

1

Apple G3 User Manual

5.Lift the top portion of the PowerBook keyboard up slightly near the top row of keys and pull it back far enough to release the small tabs that hold the bottom of the keyboard in place.

6.Flip the keyboard over and lay it on the palm rests.

7.Touch a metal surface inside the computer to discharge any static electricity.

8.Remove the three Phillips screws on the heatsink.

2

PowerBook G3 Series Bronze Keyboard - Modem

Loading...
+ 2 hidden pages