411
Instruction Manual
Wireless Thermometer
model 00411/00609SBDIA/00611A3
CONTENTS
Unpacking Instructions ........... 2
Package Contents .................. 2
Product Registration ............... 2
Features & Benets ................. 3
Setup .................................... 4
Install or Replace Batteries...... 4
Placement Guidelines ............. 5
Using the Thermometer ........... 6
Troubleshooting ..................... 7
Care & Maintenance .............. 8
Specications ......................... 8
FCC Information .................... 8
Customer Support .................. 9
Warranty............................... 9
Questions? Contact Customer Support at
(877) 221-1252 or visit www.AcuRite.com
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety
and retain it for future reference.
Unpacking Instructions
Remove the protective lm that is applied to the LCD screen prior to using this
product. Locate the tab and peel off to remove.
Package Contents
1. Display unit with tabletop stand
2. Outdoor sensor
3. Instruction Manual
PRODUCT MUST BE REGISTERED
IMPORTANT
PRODUCT REGISTRATION
Register online
to receive 1 year
warranty protection
www.AcuRite.com
TO RECEIVE WARRANTY SERVICE
Register a Product
►
2
Features & Benets
1
2
3
4
5
6
7
8 9
DISPLAY UNIT
1. Current Outdoor Temperature
Arrow icon indicates the direction
the temperature is trending
2. High Outdoor Temperature Record
3. Low Outdoor Temperature Record
4. High Outdoor Humidity Record
5. Current Outdoor Humidity
Arrow icon indicates the direction
the humidity is trending.
6. Low Outdoor Humidity Record
7. Current Indoor Temperature
Arrow icon indicates the direction
the temperature is trending
8. Low Indoor Temperature and
Humidity Record
14
15
13
12
11
10
16
9. Current Indoor Humidity
Arrow icon indicates the direction
the humidity is trending
10. High Indoor Temperature and
Humidity Record
11. Display Low Battery Indicator
12. Outdoor Sensor Low
Battery Indicator
13. Outdoor Sensor Signal Strength
OUTDOOR SENSOR
14. Integrated Hanger
for easy placement
15. Wireless Signal Indicator
Flashes when data is being sent to
the display unit
16. Battery Compartment Cover
3
SETUP
Main Unit Detachable Stand
Included with the main unit is a detachable
stand for tabletop placement.
Install or Replace Batteries
AcuRite recommends high quality alkaline
batteries for the best product performance. Heavy duty or rechargeable
batteries are not recommended.
The outdoor sensor requires lithium batteries in low temperature conditions.
Cold temperatures can cause alkaline batteries to function improperly. Use
lithium batteries in the outdoor sensor for temperatures below -4ºF / -20ºC.
Outdoor Sensor
1. Slide off the battery compartment cover.
2. Insert 2 x AA batteries into the battery
compartment, as shown. Follow the polarity
(+/-) diagram in the battery compartment.
3. Replace the battery cover.
Display Unit
1. Slide off the battery compartment cover.
2. Insert 2 x AA batteries into the battery
compartment, as shown. Follow the polarity
(+/-) diagram in the battery compartment.
3. Replace the battery cover.
Select Degrees Fahrenheit or Celsius
To select between degrees Fahrenheit (ºF) or Celsius (ºC) temperature units,
press the “ºF/ºC” button located on the back of display.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used
batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire,
as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge
non-rechargeable batteries. DO NOT short-circuit the supply terminals.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be
4
Loading...