Cisco Systems Catalyst Express 500 User Manual

Size:
3.96 Mb
Download

Getting Started Guide

Getting Started Guide for the Catalyst Express 500 Switches

INCLUDING LICENSE AND WARRANTY

1

2

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1X

3

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

12

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11X

13X

13

14

16

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15

17

18

20

 

 

 

 

 

 

 

 

 

 

 

 

 

 

19

22

 

 

2X

 

 

 

 

 

 

 

 

 

 

 

 

21

23

24

 

POWER

ETHERNET

 

 

 

 

 

 

 

 

 

 

 

23X

 

 

 

 

 

 

 

12X

14X

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

24X

25

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

25

Catalyst

Express

500

 

 

 

SERIES

26

 

SYSTEM

 

 

ALERT

 

26

 

PoE

 

 

SETUP

 

About this guide

This guide explains how to configure a Catalyst Express 500 switch for the first time. Basic configuration involves assigning network settings and a password to the switch.

After you complete the basic configuration, you can access the internal device manager application to manage and customize the switch. The device manager is an easy-to-useinterface that provides tools for configuring, monitoring, and problem solving.

Before you begin

Before you power or install the switch, review the safety information in the Regulatory Compliance and Safety Information for the Catalyst Express 500 Switch that accompanies this guide.

For more information

For complete information about installing and using the switch, see the User Guide for the Catalyst Express 500 Switches online atCisco.com > Technical Support & Documentation > Switches > Catalyst Express 500 Switches.

2

Quick tour

This illustration shows the Ethernet ports, LEDs, and other features on the switch. To set up the switch, you use the SETUP button, an Ethernet port, and the SYSTEM, SETUP, and port LEDs.

The model shown is a Catalyst Express 500-24LC.Your switch model might look slightly different.

AC power connector

Port LEDs

Security cable slot side and rear panels

POWER

ETHERNET

 

Power over Ethernet (PoE) ports supply up to 15.4 W per port

Fast Ethernet ports

Dual-purposeuplink ports: SFP module and10/100/1000BASE-T

Autonegotiate and auto-MDIXenabled on all ports

Switch LEDs:

 

 

SYSTEM

- switch status

ALERT

- events detected

PoE

-

PoE status

SETUP

-

setup mode

Catalyst

Express

500

 

 

 

SERIES

SYSTEM

ALERT

PoE

SETUP

SETUP button

3

1 Unpack the box

Verify that you have received the items shown here. If any item is missing or damaged, contact your Cisco representative or reseller for instructions.

Switch

Power cord

Rack-mountingbrackets and screws

Cable guide and screw

Mounting feet

Documentation

Catalyst

Express 500

 

Card

Documentation

Documentation

Cisco

 

Cisco

Cisco

 

 

Equipment that you supply to set up the switch:

1.A PC with Windows 2000 or XP installed.

2.A web browser (Internet Explorer 5.5, 6.0, Netscape 7.1 or later) with JavaScript enabled.

3.A straight-throughor crossover Category 5 Ethernet cable to connect your PC to the switch.

You should disable any pop-upblockers or proxy settings in your browser software and any wireless client running on your PC.

4

2 Make sure that nothing is connected to the switch

1

2

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1X

 

3

 

5

6

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

11

12

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11X

13X

13

14

16

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15

18

 

 

 

 

 

2X

 

 

 

 

 

 

 

 

 

 

 

17

19

20

22

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

21

23

24

 

POWER

 

ETHERNET

 

 

 

 

 

 

 

 

 

 

 

 

23X

 

 

 

 

 

 

 

 

 

12X

14X

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

24X

25

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

25

Catalyst

Express 500

 

26

 

26

 

SERIES

3 Power the switch

Connect the AC power cord to the connector on the switch rear panel. Next, connect the power cord plug to a grounded AC outlet.

When the switch powers on, it begins the power-onself-test(POST), a series of automatic tests that confirm proper operation. POST lasts approximately 1 minute. During POST, the port and SYSTEM LEDs blink. When POST completes, the SYSTEM LED turns solid green.

5

4 Wait for the SETUP LED to blink green

1

2

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1X

 

3

 

5

6

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

11

12

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11X

13X

13

14

16

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15

18

 

 

 

 

 

2X

 

 

 

 

 

 

 

 

 

 

 

17

19

20

22

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

21

23

24

 

POWER

 

ETHERNET

 

 

 

 

 

 

 

 

 

 

 

 

23X

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12X

14X

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

24X

25

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

25

Cisco 2960

26 26

series

+PoE-4

SYSTEM

ALERT

PoE

SETUP

When POST has completed and the SYSTEM LED is solid green, the SETUP LED blinks green. The switch is ready to be configured. (If the SETUP LED stops blinking, you can still continue with the next step.)

5 Press the SETUP button

1

2

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1X

 

3

 

5

6

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

11

12

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11X

13X

13

14

16

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15

18

 

 

 

 

 

2X

 

 

 

 

 

 

 

 

 

 

 

17

19

20

22

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

21

23

24

 

POWER

 

ETHERNET

 

 

 

 

 

 

 

 

 

 

 

 

23X

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12X

14X

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

24X

25

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

25

Cisco 2960

26 26

series

+PoE-4

SYSTEM

ALERT

PoE

SETUP

When you press the SETUP button, a switch port LED begins blinking green.

6

6 When a switch port LED blinks green, connect your PC to that port

1

2

 

4

1X

 

3

2X

 

 

 

POWER

OVER

ETHERNET

Catalyst

Express 500

 

SERIES

Connect one end of the Ethernet cable to the Ethernet port on your PC. Connect the other end to the switch port with the blinking LED. The port LEDs on your PC and the switch blink green while the switch configures the connection.

7 When the SETUP LED turns green, start a browser session on the PC

POWER

ETHERNET

Catalyst

Express 500

 

SERIES

When you start a browser session on your PC, the set-upwindow automatically appears. If the window does not appear, check that any proxy settings orpop-upblockers are disabled on your browser and that any wireless client is disabled on your PC. You might also need to enter a URL in your browser, such ascisco.com, or anotherwell-knownwebsite.

If you need help, see the “Troubleshooting” section on page 17.

7

8 Enter the network settings

Network Settings

Description

 

 

Management

We recommend using the default, VLAN 1.

Interface

The management VLAN establishes an IP

(VLAN)

connection to the switch.

 

 

IP Assignment

We recommend using the default, Static,

Mode

which means that the switch always has the

 

IP address that you assign.

 

Use the DHCP setting when you want the

 

switch to automatically obtain an IP

 

address from a DHCP server.

 

 

IP Address

Enter the IP address for the switch. (Later,

 

you can use the IP address to access the

 

switch through the device manager.)

 

 

Subnet Mask

Select a mask from the drop-downlist.

 

 

Default Gateway

Enter the IP address of the router.

 

 

Username

Enter a unique name.

 

 

8

Network Settings

Description

 

 

Password

Enter a password. The password can be

 

from 1 to 25 alphanumeric characters, can

 

start with a number, is case sensitive,

 

allows embedded spaces, but does not

 

allow spaces at the beginning or end. In the

 

Confirm Password field, enter your

 

password again.

 

 

Optional Settings

Enter a Host Name for the switch. The

 

date and time fields are populated from

 

your PC.

 

 

9 Click Submit to save changes and finish basic configuration

When you click Submit, the information you entered is saved. You have completed the initial switch setup. If you clickCancel, the fields are cleared, and you can start over.

10 Apply Smartports roles

Immediately after you click Submit in Step 9, the Smartports dialog window appears.

Click Yes andSubmit to accept the predefined port roles. The Smartports window appears. Here you can change the predefined roles or apply new port roles as described below.

Click No andSubmit to apply the Smartports roles yourself. When the device manager window appears, locate theContents menu on the left side of the window. ClickConfigure and thenSmartports. Follow these steps:

1.Select a port role from the pull-downmenu.

2.Click a port to apply the selected port role.

3.Click Submit to save the Smartports roles.

9

We recommend that you apply the Cisco Smartports roles now. The ports are then correctly configured before they are connected to devices. Smartports roles provide optimal performance on port connections, including appropriate levels of reliability, security, and availability. They also help prevent many problems caused by port misconfigurations.

The only requirements are to decide and write down which switch port will be connected to which device type.

You can connect a WAN device to any port. Apply the Router port role for this type of connection. Use an uplink port to connect to another switch and apply the Switch port role.

Smartports

 

Roles

Description

 

 

Desktop

Apply this role on switch ports connecting to

 

desktop devices, such as desktop PCs,

 

workstations, notebook PCs, and other

 

client-basedhosts.Note: Do not apply the

 

Desktop role on ports that are connected to

 

routers or to other switches.

 

 

IP Phone+

Apply this role on switch ports connecting to IP

Desktop

phones. A desktop device, such as a PC, can be

 

connected to the IP phone. Both the IP phone and

 

connected PC would have access to the network

 

and the Internet.

 

 

10

Smartports

 

Roles

Description

 

 

Access

Apply this role on switch ports connecting to

Point

wireless access points (APs). Connected to the AP

 

are mobile devices, such as wireless laptop PCs.

 

 

Printer

Apply this role on switch ports connecting to a

 

printer, such as a network printer or an external

 

print server.

 

 

Guest

Apply this role on switch ports that are used by

 

guests and visitors. Guests have access to the

 

Internet but not access to your internal network.

 

You can connect an AP on this port to provide

 

guest wireless access.

 

 

Server

Apply this role on switch ports connecting to

 

servers that provide network services, such as

 

exchange servers, collaborative servers, terminal

 

servers, file servers, and DHCP servers.

 

 

Switch

Apply this role on switch ports connecting to

 

other switches.

 

 

Router

Apply this role on switch ports connecting to

 

WAN devices that connect to the Internet, such as

 

routers, firewalls, or virtual private network

 

concentrators.

 

 

Other

Apply this role on switch ports if you do not want

 

to assign a specialized role on the port.

 

 

If you need more information, click Help on the device manager toolbar.

When you are finished, disconnect your PC from the switch to end the session.

11

11 Install the switch

Before you install the switch, review the Regulatory Compliance and Safety Information document that came with your switch. For more information about installation, see the User Guide for the Catalyst Express 500 Switches online at Cisco.com.

When selecting an installation site, observe these guidelines:

Cabling is away from sources of electrical noise, such as radios, power lines, and fluorescent lighting fixtures.

Clearance to the switch front and rear panels is such that

Airflow around the switch and through the vents is unrestricted.

Front-panelLEDs can be easily read.

Access to ports is sufficient for unrestricted cabling.

AC power cord can reach from the AC power outlet to the connector on the switch rear panel. The power outlet must be accessible at all time because it serves as the main method to disconnect power from the switch.

Temperature does not exceed 113˚F (45˚C), humidity does not exceed 85 percent, and altitude at the installation site is not greater than 10,000 feet (3049 m).

Rack-mounting

1

2

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1X

 

3

 

5

6

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

11

12

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11X

13X

13

14

16

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15

18

 

 

 

 

 

2X

 

 

 

 

 

 

 

 

 

 

 

17

19

20

22

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

21

23

24

 

POWER

 

ETHERNET

 

 

 

 

 

 

 

 

 

 

 

 

23X

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12X

14X

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

24X

25

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

25

Catalyst

Express 500

 

26

 

26

 

SERIES

Position the mounting bracket and screw on the side of the switch. Tighten the screw with a screwdriver. Repeat on the opposite side.

12

1

2

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1X

 

3

 

5

6

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

11

12

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11X

13X

13

14

16

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15

18

 

 

 

 

 

2X

 

 

 

 

 

 

 

 

 

 

 

17

19

20

22

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

21

23

24

 

POWER

 

ETHERNET

 

 

 

 

 

 

 

 

 

 

 

 

23X

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12X

14X

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

24X

25

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

25

Catalyst

Express

 

500 SERIES

 

26

 

26

Insert the switch into the 19-inchrack and align the bracket in the rack. Use either the10-32pan-headscrews, or the12-24pan-slottedscrews to secure the switch in the rack. Use the black Phillips screw to attach the cable guide to either bracket.

Desktop-mounting

SERIES

26

 

 

26

25

 

 

25

24X

500

Express

Catalyst

 

 

 

 

 

 

14X

12X

 

 

 

 

 

 

 

 

 

 

 

23X

23

 

 

 

 

 

 

 

 

 

 

 

ETHERNET

 

POWER

 

 

24

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

22

21

20

19

17

 

 

 

 

 

 

 

 

 

 

 

2X

 

 

 

 

 

 

18

16

15

13X

11X

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

14

13

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12

11

10

9

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

6

5

3

 

 

1X

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

2

1

Place the switch upside-downon a flat surface. Attach the four rubber pads to the recessed areas on the bottom of the switch. Place the switch on a desktop near an AC power source.

If you are stacking switches, make sure that the mounting feet of the upper switch align with the recesses of the lower switch. Do not stack more than four units high.

13

Wall-mounting

Position the mounting bracket and screw on the side of the switch, rotated 90-degreesfrom the view shown in therack-mountingillustration. Tighten the screw with a screwdriver. Repeat on the opposite side.

Mount the switch on the wall with the front panel facing up. For the best support of the switch and cables, make sure that the switch is attached securely to wall studs or to a firmly attached plywood mounting backboard. Screws for wall-mountingare not provided.

If your switch has a redundant power supply (RPS) connector on the rear panel, make sure that the cover plate is installed if an RPS is not connected to the switch.

14

12 Connect devices

1

2

 

4

 

 

 

 

 

 

 

 

 

 

 

 

1X

 

3

 

5

6

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

11

12

 

 

 

 

 

 

 

2X

 

 

 

 

 

8

 

20

 

19

20

22

 

 

 

 

 

 

 

 

 

19

22

 

21

23

24

 

POWER

 

ETHERNET

 

 

 

 

21

24

 

 

 

 

 

 

 

 

 

 

 

23

 

 

 

23X

 

 

 

 

 

 

 

 

 

 

 

23X

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

24X

25

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

25

 

 

 

 

 

 

 

 

 

 

24X

 

 

 

 

25

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

25

Catalyst

Express

 

Catalyst

 

 

500

SERIES

Express

500

 

 

SERI

 

26

 

 

26

 

 

 

26

 

 

SYSTEM

 

 

 

ALERT

 

26

 

 

PoE

 

 

 

RPS

 

 

 

SETUP

 

When you connect devices to the switch ports, refer to the Smartports role assignments that you recorded in Step 10.

Ethernet connections

Use either straight-throughor crossover Category 5 cables withRJ-45connectors to connect from the switch Ethernet ports to other devices.

By default, the PoE ports automatically provide up to 15.4 W power when IEEE 802.3af-compliant-powereddevices are connected.

By default, autonegotiation and auto-MDIXare enabled on the10/100BASE-Tand10/100/1000BASE-Tports; the ports automatically provide the appropriate Ethernet connection.

Uplink port connections

Use the 10/100/1000BASE-Tport or add a Ciscofiber-opticSFP module to the SFP module port for a Gigabit uplink connection to another switch. Use Category 5 cables withRJ-45connectors to connect to a10/100/1000BASE-Tport. Use LC fiber connectors to connect to afiber-opticSFP module.

15

The dual-purposeuplink ports establish a link through either the SFP module port or the10/100/1000BASE-Tport, but not both at the same time. An SFP module port has precedence over a10/100/1000BASE-Tport. If an SFP module port has a link, that link is active. If the SFP port does not have a link and the10/100/1000BASE-Tport does, that link is active. Reselection occurs when the active link is disconnected.

For a list of supported modules, see the Catalyst Express 500 Switch Release Notes on Cisco.com. For detailed instructions on installing, removing, and connecting to SFP modules, see the documentation that accompanied the module.

13 More information

This section includes information about the device manager, troubleshooting, and the Cisco warranty terms.

How to access the device manager

16

The simplest way to configure, manage, and monitor the switch is by using the device manager. You can access the device manager from anywhere in your network through a web browser. Follow these steps:

1.Set up and install the switch in your network, and connect devices as described in this guide.

2.Launch a web browser on your PC.

3.Enter the switch IP address (the address that you assigned in Step 8) in the web browser, and press Enter. The device manager page appears.

4.To end the session, close your browser window.

About Cisco Network Assistant

Cisco Network Assistant is a free software program that you download from Cisco.com and run on your PC. Network Assistant offers advanced options for configuring and monitoring multiple devices. Click Network Assistant on the device manager menu for more information.

Troubleshooting

Help with the initial switch configuration is provided below. For additional assistance, refer to the online documentation at

Cisco.com > Technical Support & Documentation > Switches > Catalyst Express 500 Switches.

Checklist

Recommendation

 

 

Was the SETUP LED

If no, or you are not sure, restart

blinking when you

the switch. Make sure that the

pressed the SETUP

SETUP LED is blinking when you

button?

press the SETUP button.

 

 

Did you connect your PC

Verify that you are connected to

to the wrong switch port?

the switch port with the blinking

 

LED as shown in Step 6.

 

 

17

Checklist

Recommendation

 

 

Did you start a browser

If yes, or you are not sure, restart

session on your PC before

the switch. Perform Step 2

the SETUP LED was solid

through Step 6. When the SETUP

green?

LED is solid green, start a browser

 

session on your PC. Complete the

 

set-upprocedure.

 

 

Did you start a browser

If the window does not appear,

session on your PC and

enter a URL in your browser, such

the set-uppage did not

as cisco.com, or another

appear?

well-knownwebsite.

 

 

Did you have a pop-up

If yes, disconnect the cable from

blocker running on your

the switch port, disable the

PC when you connected

pop-upblocker, and reconnect to

to the switch port?

the switch. Press the SETUP

 

button to continue.

 

 

Did you have proxy

If yes, disconnect the cable from

settings enabled in your

the switch port, disable the proxy

browser software when

settings, and reconnect to the

you connected to the

switch. Press the SETUP button to

switch port?

continue.

 

 

Did you have a wireless

If yes, disconnect the cable from

client running on your PC

the switch port, disable the

when you connected to

wireless client, and reconnect to

the switch port?

the switch. Press the SETUP

 

button to continue.

 

 

Do you need to change

Go to the Configure > Express

the switch IP address after

Setup device manager screen to

you have already

change the switch IP address. For

completed the initial

more information about changing

setup?

the swith IP address, see the User

 

Guide for the Catalyst Express

 

500 Switches online at Cisco.com.

 

 

18

Cisco Limited Lifetime Hardware Warranty

Terms

There are special terms applicable to your hardware warranty and various services that you can use during the warranty period. Your formal Warranty Statement, including the warranties and license agreements applicable to Cisco software, is available on Cisco.com. Follow these steps to access and download the Cisco Information Packet and your warranty and license agreements from Cisco.com.

1.Launch your browser, and go to this URL: http://www.cisco.com/univercd/cc/td/doc/es_inpck/cetrans.htm

The Warranties and License Agreements page appears.

2.To read the Cisco Information Packet, follow these steps:

a.Click the Information Packet Number field, and make sure that the part number78-5235-03A0is highlighted.

b.Select the language in which you would like to read the document.

c.Click Go.

d.The Cisco Limited Warranty and Software License page from the Information Packet appears.

e.Read the document online, or click the PDF icon to download and print the document in Adobe Portable Document Format (PDF).

Note You must have Adobe Acrobat Reader to view and print PDF files. You can download the reader from Adobe’s website:http://www.adobe.com

19

3.To read translated and localized warranty information about your product, follow these steps:

a.Enter this part number in the Warranty Document Number field:

78-6310-02C0

b.Select the language in which you would like to view the document.

c.Click Go.

The Cisco warranty page appears.

d.Read the document online, or click the PDF icon to download and print the document in Adobe Portable Document Format (PDF).

You can also contact the Cisco service and support website for assistance:

http://www.cisco.com/public/Support_root.shtml.

Duration of Hardware Warranty

A Cisco product hardware warranty is supported for as long as the original end user continues to own or use the product, provided that the fan and power supply warranty is limited to five (5) years. In the event of a discontinuance of product manufacture, the Cisco warranty support is limited to five (5) years from the announcement of the discontinuance.

Replacement, Repair, or Refund Policy for Hardware

Cisco or its service center will use commercially reasonable efforts to ship a replacement part within ten (10) working days after receipt of the Return Materials Authorization (RMA) request. Actual delivery times can vary, depending on the customer location.

Cisco reserves the right to refund the purchase price as its exclusive warranty remedy.

20

To Receive a Return Materials Authorization (RMA)

Number

Contact the company from whom you purchased the product. If you purchased the product directly from Cisco, contact your Cisco Sales and Service Representative.

Complete the information below, and keep it for reference.

Company product purchased from

Company telephone number

Product model number

Product serial number

Maintenance contract number

21

22

23

Corporate Headquarters

European Headquarters

Americas Headquarters

Asia Pacific Headquarters

Cisco Systems, Inc.

Cisco Systems International BV

Cisco Systems, Inc.

Cisco Systems, Inc.

170 West Tasman Drive

Haarlerbergpark

170 West Tasman Drive

168 Robinson Road

San Jose, CA 95134-1706

Haarlerbergweg 13-19

San Jose, CA 95134-1706

#28-01Capital Tower

USA

 

1101 CH Amsterdam

USA

Singapore 068912

www.cisco.com

The Netherlands

www.cisco.com

www.cisco.com

Tel:

408 526-4000

www-europe.cisco.com

Tel: 408 526-7660

Tel: +65

6317 7777

 

800 553-NETS(6387)

Tel: 31 0 20 357 1000

Fax: 408 527-0883

Fax: +65

6317 7799

Fax:

408 526-4100

Fax: 31 0 20 357 1100

 

 

 

Cisco Systems has more than 200 offices in the following countries. Addresses, phone numbers, and fax numbers are listed on the

C i s c o W e b s i t e a t w w w . c i s c o . c o m / g o / o f f i c e s

Argentina • Australia • Austria • Belgium • Brazil • Bulgaria • Canada • Chile • China PRC • Colombia • Costa Rica Croatia • Cyprus • Czech Republic • Denmark • Dubai, UAE • Finland • France • Germany • Greece Hong Kong SAR • Hungary • India • Indonesia • Ireland • Israel • Italy • Japan • Korea • Luxembourg Malaysia • Mexico • The Netherlands • New Zealand • Norway • Peru • Philippines • Poland • Portugal • Puerto Rico • Romania • Russia • Saudi Arabia • cotland • Singapore • Slovakia • Slovenia • South Africa • Spain • Sweden Switzerland • Taiwan • Thailand • Turkey • Ukraine • United Kingdom • United States • Venezuela • Vietnam • Zimbabwe

CCSP, CCVP, the Cisco Square Bridge logo, Follow Me Browsing, and StackWise are trademarks of

Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Access Registrar, Aironet, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems,

Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, FormShare, GigaDrive, GigaStack, HomeLink, Internet Quotient, IOS, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, LightStream, Linksys, MeetingPlace, MGX,

the Networkers logo, Networking Academy, Network Registrar, Packet, PIX,Post-Routing,Pre-Routing,ProConnect, RateMUX, ScriptShare, SlideCast, SMARTnet, The Fastest Way to Increase Your Internet Quotient, and TransPath are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.

All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0601R)

© 2005 Cisco Systems, Inc. All rights reserved.

Printed in China PRC

78-17084-02DOC-7817084=