AEG 8360 D User Manual

Size:
362.01 Kb
Download

8160 D/8190 D

8260 D/8290 D

8360 D/8390 D

8361 D/8391 D

Cooker Hood

Campana extractora

Exaustor

Operating and Installation Instructions Instrucciones de montaje y manejo Manual de Instruções

Contents

 

Safety warnings ................................................................................

3

For the user ........................................................................................

3

For the installer ...................................................................................

3

.............................................................................................................

Description of the Appliance ...........................................................

5

Extractor version ................................................................................

5

Filter Version ......................................................................................

5

Control Panel - 8160 D - 8190 D - 8260 D - 8290 D ..........................

6

Control Panel - 8360 D - 8390 D - 8361 D - 8391 D ..........................

7

Maintenance and care ......................................................................

8

Cleaning the hood ..............................................................................

8

Metal grease filter ...............................................................................

8

Removing the metal grease filter ........................................................

8

Charcoal filter .....................................................................................

9

Changing the light bulb .....................................................................

10

What to do if ...................................................................................

11

Special accessories .......................................................................

12

Technical assistance service .........................................................

12

Technical Details ............................................................................

13

Mounting accessories included ....................................................

12

Electrical connection .........................................................................

65

Wall unit mounting ............................................................................

66

Printed on recycled paper

AEG - putting words into action

2

Safety warnings

For the user

The cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam.

Always cover lighted elements, to prevent excess heat from damaging the appliance. In the case of oil, gas and coal fired cookers it is essential to avoid open flames.

Also, when frying, keep the deep frying pan on the cooker top/ cooker under careful control.

The hot oil in the frying pan might ignite due to overheating.

The risk of self-ignitionincreases when the oil being used is dirty.

It is extremely important to note that overheating can cause a fire.

Never carry out any flambé cooking under the hood.

Always disconnect the unit from the power supply before carrying out any work on the hood, including replacing the light bulb (take the cartridge fuse out of the fuse holder or switch off the automatic circuit breaker).

It is very important to clean the hood and replace the filter at the recommended intervals. Failure to do so could cause grease deposits to build up, resulting in a fire hazard.

The appliance is not intended for use by young children or infirm persons without supervision.

Young children should be supervised to ensure that they do not play with the appliance.

WARNING - Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.

For the installer

When used as an extractor unit, the hood must be fitted with a 150mm diameter hose.

Should there already be a pipe of diameter 125 or 120 mm that ducts to the outside through the walls or roof, it is possible to use the 150/125-120mm reduction flange provided.

In this case the hood will be slightly noisier.

When installing the hood, make sure you respect the following minimum distance from the top edge of the cooking hob/ring

surfaces:

 

electric cookers

500 mm

gas cookers

650 mm

coal and oil cookers

700 mm min.

3

The national Standard on fuel-burningsystems specifies a maximum depression of 0.04 mbar in such rooms.

The air outlet must not be connected to chimney flues or combustion gas ducts. The air outlet must under no circumstances be connected to ventilation ducts for rooms in which fuel-burningappliances are installed.

The air outlet installation must comply with the regulations laid down by the relevant authorities.

When the unit is used in its extractor version, a sufficiently large ventilation hole must be provided, with dimensions that are approximately the same as the outlet hole.

National and regional building regulations impose a number of restrictions on using hoods and fuel-burningappliances connected to a chimney, such as coal or oilroom-heatersand gas fires, in the same room.

Hoods can only be used safely with appliances connected to a chimney if the room and/or flat (air/environment combination) is ventilated from outside using a suitable ventilation hole approximately 500-600cm2 large to avoid the possibility of a depression being created during operation of the hood.

If you have any doubts, contact the relevant controlling authority or building inspector’s office.

Since the rule for rooms with fuel burning appliances is “outlet hole of the same size as the ventilation hole”, a hole of 500-600cm2, which is to say a larger hole, could reduce the performance of the extractor hood.

If the hood is used in its filtering function, it will operate simply and safely in the above conditions without the need for any of the aforementioned measures.

When the hood is used in its extractor function, the following rules must be followed to obtain optimal operation:

short and straight outlet hose

keep bends in outlet hose to a minimum

never install the hoses with an acute angle, they must always

follow a gentle curve.

keep the hose as large as possible (preferably the same diameter as the outlet hole).

Failure to observe these basic instructions will drastically reduce the performance and increase the noise levels of the extractor hood.

4

Description of the Appliance

• The hood is supplied as an extractor unit and can also be used with a filtering function

by fitting one charcoal filter.

• You will need an original AEG charcoal filter for this function (Available from your local AEG Service Force Centre).

Extractor version

In this version fumes are extracted to the outside via a hose connected to the coupling ring A.Fig. 1.

• In order to obtain the best performance

Fig. 1

 

the hose should have a diameter equal

 

to the outlet hole.

 

Should there already be a pipe of diameter 125 mm that ducts to the outside through the walls or roof, it is possible to use the 150/ 125 mm reduction flange provided. In this case the hood will be slightly noisier.

Filter Version

The air is filtered through an charcoal filter and returned to the kitchen through the top grill of the outlet pipe.

You will need an original AEG charcoal filter for the filtering function. (See Special Accessories).

Fix the deflector using 2 screws Ø 2,9x13 mm. Fig. 2.

Optionally, the position of the chimney

elements can be changed. When using the hood in the filter

version the chimney must be fixed at the top, with the air outlet grill at the side.

Fig. 2

5

Control Panel

Best results are obtained by using a low speed for normal conditions and a high speed when odours are more concentrated. Turn the hood on a few minutes before you start cooking, you will then get an under pressure in the kitchen. The hood should be left on after cooking for about 15 minutes or until all the odours have disappeared. The control switches are located on the unit’s front panel:

8160 D - 8190 D

the light switch switches the hood lamp on and off

the motor switch switches the motor on and off, enabling you to select one of the three different speeds.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Light switch

Motor switch

8260 D - 8290 D

the light switch switches the hood lamp on and off

the motor switch switches the motor off

Speed 1: Speed 1push-button

Speed 2: Speed 2push-button

Speed 3: Speed 3push-button

Light switch

Speed 3

Motor switch

Speed 1

Speed 2

6

Control Panel

8360 D - 8361 D - 8390 D - 8391 D

Best results are obtained by using a low speed for normal conditions and a high speed when odours are more concentrated. Turn the hood on a few minutes before you start cooking, you will then get an under pressure in the kitchen. The hood should be left on after cooking for about 15 minutes or until all the odours have disappeared. The control switches are located on the unit’s front panel:

A- Mains switch, OFF.

B- Start and choice of motor speed 1-2-3-1-2.........

C- Indicates speed 1 (LED).

D- Indicates speed 2 (LED)

E- Indicates speed 3 (LED)

F- Indicates Intensive speed (LED).

G- Intensive speed on/off. The Intensive speed runs for 5 minutes: If the hood is on when the Intensive speed is activated, the hood reverts to previous speed after 5 minutes.

If the hood is off when the Intensive speed is activated, the hood will be turned off after 5 minutes.

To interrupt the Intensive speed, press button A or B.

H- Light ON/OFF

Should the hood or the controls fail to operate: disconnect the power supply for at least 5 seconds, then turn the hood back on again.

7

Fig. 3

Maintenance and care

The hood must always be disconnected from the electricity supply before beginning any maintenance work.

Cleaning the hood

Clean the outside of the hood using a damp cloth and a mild detergent.

Never use corrosive, abrasive or flammable cleaning products.

Never insert pointed objects in the motor’s protective grid.

Wash the outside surfaces using a delicate detergent solution. Never use caustic detergents or abrasive brushes or powders.

Only ever clean the switch panel and filter grille using a damp cloth and delicate detergents.

It is extremely important to clean the unit and change the filters at the recommended intervals. Failure to do so will cause grease deposits to build up that could constitute a fire hazard.

Metal grease filter

The purpose of the grease filters is to absorb grease particles which form during cooking and it must always be used, either in the external extraction or internal recycling function.

Attention: the metal grease filters must be removed and washed, either by hand or in the dishwasher, every four weeks.

Removing the metal grease filter

• First, push the metal grease filter stop backwards, then extract the filter, pulling downwards. Fig. 3.

Hand washing

Soak grease filters for about one hour in hot water with a little washing-upliquid, then rinse off

thoroughly with hot water. Repeat the process if necessary. Refit the grease filters when they are dry.

Dishwasher

Place grease filters in the dishwasher. Select most powerful washing programme and highest temperature, at least 65°C.

Repeat the process. Refit the grease filters when

they are dry.

When washing the metal grease filter in the dishwasher a slight discolouration of the filter can occur, this does not have any impact on its performance.

• Clean the inner housing using a hot detergent solution only (never

use caustic detergents, abrasive powders or brushes).

8

Charcoal filter

The charcoal filter should only be used if you want to use the hood in the recirculation function.

To do this you will need an original AEG charcoal filter (available from your local Service Force Centre).

Cleaning/replacing the carbon filter

Unlike other carbon filters, the LONGLIFE carbon filter can be cleaned and reactivated. At normal use the filter should be cleaned every second month (when using the hood 2,5 hours per day, in avarage). The best way to clean the filter is in the dishwasher. Use normal detergent and choose the highest temperature (65º C). Wash the filter separately so that no food parts gets stuck on the filter and later causes bad odours. To reactivate the carbon, the filter should be dried in an oven for 10 minutes with a temperature of maximum 100º C. After approximately three years of use, the carbon filter should be replaced with a new, as the odour reduction capacity will be reduced.

Mounting - Fig. 4

Put the charcoal filter frame in place and fix it with 5 screws. Fit the charcoal filter first from the rear side and fix it frontwards using the two red keys A.

Fig. 4

To remove proceed in the reverse order.

Always specify the hood model code number and serial number when ordering replacement filters. This information is shown on the registration plate located on the inside of the unit.

The charcoal filter can be ordered from your local AEG Service Force Centre.

9

Warning

Failure to observe the instructions on cleaning the unit and changing the filters will cause a fire hazard. You are therefore strongly recommended to follow these instructions.

The manufacturer declines all responsibility for any damage to the motor or any fire damage linked to inappropriate maintenance or failure to observe the above safety recommendations.

Changing the light bulb

• Disconnect the cooker hood from the main supply.

8160 D - 8190 D

• Remove the lamp cover. Fig. 5.

• Replace the old bulb with a new one of the same type.

• Remount the lamp cover.

1

2

8260 D - 8290 D - 8360 D - 8390 D - 8361 D - 8391 D

Press (1) the lamp cover (2) and open it. Fig. 6.

Replace the old bulb with a new one of the same type (3).

Close the lamp cover.

If the light does not come on, make sure the bulb has been inserted correctly before contacting your local Service Force Centre.

Fig. 5

3

1

2

Fig. 6

10