Operation Manual
CONTENTS
Features
Parts and Functions
Connections
Sample Settings
Connection Examples With Compact
Effects
Connection Examples With
Multi-Effects
Troubleshooting
Specifications
Usage Precautions
Safety Precautions
•••••••••••••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••••••••••
••••••••••••••••••••••••
•••••••••••••••••••••••••••••••
•••••••••••••••••••••••••
•••••••••••••••••••••••
•••••••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
2
4
6
8
10
11
12
14
15
16
Features
Thank you for selecting the ZOOM Hyper Lead HL-01 (hereafter simply called the
"HL-01"). The HL-01 is a high-performance compact distortion unit developed with input
from top-level professional musicians the worldwide. It reflects ZOOM's rich expertise
with analog circuitry and has many attractive features.
Smooth and solid high-gain sound
◆
Newly developed analog triple gain circuit is ideal for a wide range of playing styles
and applications. From lead guitar to backing, the HL-01 opens up a world of
distortion possibilities. Natural and smooth sounding distortion in the all-important
midrange creates impressively solid guitar sound.
3-band equalizer with superb effectiveness
◆
In addition to the BASS and TREBLE controls, the HL-01 features a parametric
midrange control whose turnover point can be adjusted. This gives you full control
over the most important frequency range for each instrument, letting you stress a
characteristic or reduce overlapping ranges. The TREBLE and BASS controls are
tuned to allow spot-on adjustments of high-range sparkle and low-end energy.
ZOOM Hyper Lead HL-01
2
Amazing low-noise design
◆
Designed from the ground up for optimum performance, the HL-01 uses only strictly
selected parts. For an effect without built-in noise reduction, the low noise level of the
HL-01 is truly amazing.
Mechanical switch for true bypass
◆
On/off switching is performed using a mechanical foot switch which operates
smoothly and gives tactile feedback. In the bypass position, the guitar signal is passed
through without any alteration.
Sturdy metal chassis
◆
The rock-solid case made of aluminum not only looks good, it also can withstand the
rigors of use on stage or rough handling during transport. Stability is excellent,
ensuring that the unit will not topple over while in use.
ZOOM Hyper Lead HL-01
3
Parts and Functions
This section explains the various parts of the HL-01.
ZOOM Hyper Lead HL-01
4
GAIN control
1
This control adjusts the distortion gain. Turning it
clockwise increases the distortion intensity.
TREBLE control
2
This control adjusts the high frequency range.
Turning the control clockwise makes the sound
brighter and sharper.
3
MIDDLE control
This control adjusts the middle frequency range.
Turning the control emphasizes or attenuates the
range selected with the RANGE control ( ).
RANGE control
4
Adjusts the turnover frequency for the MIDDLE
control ( ).
3
5
BASS control
This control adjusts the low frequency range.
Turning the control clockwise makes the sound more
solid and heavy.
LEVEL control
6
This control adjusts the output signal level. Turning
the control clockwise increases the volume.
IN jack
7
This is the input of the unit and it also acts as a
4
power switch. When you connect the plug of the
cable from the guitar, the unit is turned on.
8
OUT jack
This is the output of the unit. Connect the plug of the
cable going to the guitar amplifier or other effect
device here.
9
AC adapter jack
When powering the unit from the AC adapter, insert
the plug from the adapter into this jack. Be sure to
use only the dedicated AC adapter for the unit
(Zoom AD-0006). When the AC adapter is
connected, the HL-01 will always be ON, regardless
of whether a cable is plugged into the IN jack.
10
Indicator
Lights up when the HL-01 effect is active. When the
remaining battery capacity is getting low, indicator
brightness decreases.
11
Foot switch
Switches the HL-01 effect on and off.
12
Battery compartment
A 9V battery (6F22) can be inserted here.
ZOOM Hyper Lead HL-01
5
Connections
B
A
T
T
E
R
Y
9V
O
P
E
N
1 2
3
Open cover of battery
compartment and insert battery
Turn amplifier off and connect
cable to guitar
Plug cable from guitar into IN
jack of HL-01
Make sure to insert the battery to
the connector with correct polarity.
Make sure that the plug is
inserted fully into the OUT
jack of the guitar.
Insert the cable from the
guitar into the IN jack of
the HL-01.
This turns the
HL-01 on.
This section explains how to connect the HL-01.
ZOOM Hyper Lead HL-01
6
5
4
6
Connect cable to OUT jack
of HL-01
Turn amplifier on and raise
volume
ATTENTION
Always follow the
above sequence.
Connect another cable to the OUT jack of the HL-01.
Make sure that the plug is inserted firmly.
Turn power to the amplifier on, and adjust the
volume to a suitable level, using the controls in the
following sequence.
(1) Volume control on guitar
(2) LEVEL control on HL-01
(3) Volume control on
amplifier
Connect output cable to amplifier
Make sure that the amplifier is turned
off and the volume is turned down.
Then plug the cable
from the OUT
jack of the
HL-01 to the IN
jack of the
amplifier.
If steps are performed
in reverse order, there is
a danger of damage to
the amplifier or
speakers.
ZOOM Hyper Lead HL-01
7
Sample Settings
This section shows some actual setting examples.
* When experimenting, you should set the
gain and drive controls on the amplifier so
that it does not distort excessively.
ZOOM Hyper Lead HL-01
8
* Use the LEVEL control on the HL-01 to
compensate for the level difference between
the "effect on" and bypass condition.
Almighty drive sound
■
With all controls in the center position, the HL-01
provides a standard drive sound suitable for many
applications, ranging from lead solos to rhythm
backing.
"Half pedal" sound with prominent
■
midrange
With the TREBLE and BASS controls turned slightly
down and the MIDDLE control raised a bit, the
midrange is emphasized. This results in a peaky sound
similar to pedal wah in about midway position.
MAX
MAX
MIN
Fat sound
■
This is a heavy distortion sound achieved by turning the
GAIN control all the way up and slightly raising the
midrange. Even with deep distortion, the sound will
stay stable and well defined. The fat sound is suited for
riffs and rhythm guitar. Adjust the MIDDLE and
RANGE controls according to the characteristics of the
instrument.
Fast response lead sound
■
These settings are great for quick finger work. With the
BASS control turned slightly down and the TREBLE
control slightly up, you get a clear, distinct sound
suitable for picking solos. Adjust the TREBLE control
according to the characteristics of the instrument. To get
a more crunchy character, turn down the GAIN control.
Glitter midrange
■
Raising the TREBLE and BASS controls and cutting the
midrange gives a glittery sound, great for rhythm guitar
or power chords. You can use the RANGE control to
fine-tune the effect.
ZOOM Hyper Lead HL-01
9
Connection Examples With Compact Effects
CHORUS
DEPTH4RATE2MIX
5
GAIN6TREBLE6MIDDLE
7
RANGE6BASS
4
GAIN5TREBLE5MIDDLE
5
RANGE5BASS
5
DELAY
TIME
30ms
MIX5FEEDBACK
0
This section shows how to use the HL-01 together with other compact effect devices.
Combination with chorus effect
■
Combination with short delay
■
ZOOM Hyper Lead HL-01
10
In this example, the chorus uses
a light modulation (depth)
setting at a fairly slow rate
(speed), to achieve a light, airy
sound. Make sure not to set the
chorus modulation too high.
Guitar solos and arpeggios in
LA rock style sound great with
this setup.
Using a single delay with short
delay time can give more body
to the sound. A delay time
setting of about 30 to 40
milliseconds is suitable, and the
level of the delay sound should
be slightly lower than the level
of the original sound. This setup
is good for riffs and solos.
Connection Examples With Multi-Effects
RETURN
SEND
This section shows how to use the HL-01 together with multi-effect devices such as the ZOOM
GFX-4 or GFX-8.
Connecting HL-01 before multi-effect device
■
Using send/return loop of multi-effect
■
In this example, the
connection sequence is HL-01
→ multi-effect → amplifier.
Distortion is produced by the
HL-01, and distortion effects
of the multi-effect device are
bypassed.
By connecting the HL-01 in
the send/return loop of a
multi-effect device such as the
ZOOM GFX-8, the HL-01 can
be used as if it were a part of
the other device. You can
switch the HL-01 on and off
using patch programs of the
multi-effect.
ZOOM Hyper Lead HL-01
11
Troubleshooting
If there seems to be a problem with the unit, check the following points first.
No sound.
◆
●
Are connections to the IN and OUT
jacks reversed?
Check the connections.
●
Is the battery exhausted?
Insert a fresh battery.
●
Is the AC adapter connected?
Make sure that the AC adapter is connected
correctly.
●
Is guitar or amplifier volume or LEVEL
control of HL-01 turned down?
Raise the volume.
Noise is heard.
◆
●
Are several distortion effects used in
series?
Excessive compressor settings can also result in
ZOOM Hyper Lead HL-01
12
noise. Turn on only the currently used devices.
●
Is the cable of good quality?
Low-quality cables can cause noise. Use a
short, good-quality cable.
●
Is the unit used in the vicinity of a
computer monitor, refrigerator,
fluorescent lamp, motor, or similar
device?
The guitar or cable can pick up noise from such
devices. In case of problems, increase the
distance to such devices.
●
Is an AC adapter other than the
specified type used?
Be sure to use only the dedicated AC adapter
(AD-0006).
Battery gets used up very quickly.
◆
●
Is a plug inserted in the IN jack?
Power to the HL-01 gets turned on when a plug
is inserted in the IN jack. In this condition,
current is drawn from the battery regardless of
whether the effect is switched on or off. When
not using the unit, be sure to disconnect the
plug from the IN jack.
●
Is a manganese battery being used?
The use of an alkaline battery rather than
manganese is recommended. The initially
supplied battery is for checking only and may
have a short service life. When mounting the
HL-01 on an effect board or similar, powering it
with the AC adapter (AD-0006) is
recommended.
Distortion is not strong enough.
◆
Sound is not clear.
●
Are controls on HL-01 and guitar set
correctly?
Turn up the GAIN control and the TREBLE,
MIDDLE, RANGE, or BASS control on the
HL-01. Try to fully turn up the level and tone
controls of the guitar.
●
Is another effect device being used?
When using an effect device between the HL-01
and the guitar, check the battery, volume, and
cable of that device.
Cannot produce the desired sound.
◆
●
Are controls set to extreme positions?
First set all controls to center and start with
slight adjustments.
●
Is the playing technique suitable?
The audible result of using the HL-01 depends
on various different factors. Hardware such as
effect devices, guitar, and amplifier of course
must be considered, but technique such as
picking and fingering are also important. Try
varying your style to check the effect.
ZOOM Hyper Lead HL-01
13
Specifications
Controls Foot switch
Input Standard monaural phone jack
Output Standard monaural phone jack
Power requirements Battery (6F22, 9 V) or AC adapter AD-0006 (9 V DC, 300 mA, center minus)
Battery life Continuous operation: approx. 26 hours (alkaline) or 8 hours (manganese)
External Dimensions 127 (D) x 98 (W) x48 (H) mm
Weight 720 g (including battery)
Supplied accessories Instruction manual
ZOOM Hyper Lead HL-01
14
GAIN control LEVEL control
TREBLE control BASS control
MIDDLE control RANGE control
Rated input impedance: 470 kilohms
Rated input level: -20 dBm
Rated output impedance: 10 kilohms or more
Rated input level: +10 dBm
Warranty card
Battery (6F22, 9V)
* 0 dBm = 0.775 Vrms
* Design and specifications subject to
change without notice.
Usage Precautions
Electrical interference
■
For safety considerations, the HL-01 has been
designed to provide maximum protection
against the emission of electromagnetic
radiation from inside the device, and
protection from external interference.
However, equipment that is very susceptible
to interference or that emits powerful
electromagnetic waves should not be placed
near the HL-01, as the possibility of
interference cannot be ruled out entirely.
Cleaning
■
Use a soft, dry cloth to clean the HL-01. If
necessary, slightly moisten the cloth. Do not
use abrasive cleanser, wax, or solvents (such
as paint thinner or cleaning alcohol), since
these may dull the finish or damage the
surface.
Please keep this manual in a convenient
place for future reference.
ZOOM Hyper Lead HL-01
15
Warning
Warning
Caution
Caution
Caution
Caution
Safety Precautions
In this manual, symbols are used to highlight warnings and cautions for you to
read so that accidents can be prevented. The meanings of these symbols are as
follows:
This symbol indicates explanations about extremely
dangerous matters. If users ignore this symbol and handle the
device the wrong way, serious injury or death could result.
This symbol indicates explanations about dangerous matters.
If users ignore this symbol and handle the device the wrong
way, bodily injury and damage to the equipment could result.
Please observe the following safety tips and precautions to ensure hazard-free
use of the HL-01.
About power
• Since power consumption of this unit is fairly high, we recommend
the use of an AC adapter whenever possible. When powering the unit
from a battery, use only an alkaline type.
AC adapter operation
• Be sure to use only an AC adapter which supplies 9 V DC, 300 mA
and is equipped with a "center minus" plug (Zoom AD-0006). The
use of an adapter other than the specified type may damage the unit
and pose a safety hazard.
• Connect the AC adapter only to an AC outlet that supplies the rated
voltage required by the adapter.
• When disconnecting the AC adapter from the AC outlet, always
grasp the adapter itself and do not pull at the cable.
• If the unit is not to be used for a long time, disconnect the AC
adapter from the outlet.
Battery operation
• Use a generic 9V dry battery (6F22) (alkaline or manganese).
• The HL-01 cannot be used for recharging.
• Pay close attention to the labeling of the battery to make sure you
choose the correct type.
• If the HL-01 is not to be used for an extended period of time, remove
ZOOM Hyper Lead HL-01
16
the battery from the unit.
• If batteries leakage has occurred, wipe the battery compartment and
the battery terminals carefully to remove all remnants of battery
fluid.
• While using the unit, the battery compartment cover should be
closed.
Environment
Avoid using your HL-01 in environments where it will be exposed to:
• Extreme temperature
• High humidity or moisture
• Excessive dust or sand
• Excessive vibration or shock
Handling
• Since the HL-01 is a precision electronic device, avoid applying
excessive force to the controls. Do not operate the keys or controls
with your foot.
• Make sure that no foreign objects (coins or pins etc.) or liquids can
enter the unit.
• Be sure to turn the power to all equipment off before making
connections.
• Before moving the unit, turn the power off, and disconnect all cables
and the AC adapter.
Alterations
Never open the case of the HL-01 or attempt to modify the product in
any way since this can result in damage to the unit.
ZOOM CORPORATION
NOAH Bldg., 2-10-2, Miyanishi-cho, Fuchu-shi, Tokyo 183-0022, Japan
PHONE: +81-42-369-7116 FAX: +81-42-369-7115
Web Site: http://www.zoom.co.jp
Printed in Japan HL-01-5000-2
Loading...