Yamaha Audio AX15M, AX15W, AX12M, AX12, AX15 User Manual

...

0 (0)

SPEAKER SYSTEM

AX10/AX12/AX15

AX12M/AX15M

SUBWOOFER

AX15W

ENGLISH

DEUTSCH

FRAN‚AIS

ESPA„OL

OwnerÕs Manual

Thank you for choosing the YAMAHA speaker system. In order to take maximum advantage of the speakerÕs features and ensure maximum performance and longevity, please read this manual carefully before using the speaker system. Keep the manual in a safe place for future reference.

Contents
PRECAUTIONS .................................................................	3
Before Making Connections ...............................................	4
Speciﬁcations .....................................................................	5

Bedienungsanleitung

Wir beglŸckwŸnschen Sie zum Kauf dieses YAMAHA-Laut- sprechersystems. Damit Sie die Ausstattungen dieses Lautsprechersystems optimal nutzen kšnnen, und um maximale Leistung und Lebensdauer sicherzustellen, lesen Sie bitte vor der Inbetriebnahme diese Anleitung sorgfŠltig durch. Bitte bewahren Sie diese Bedienungsanleitung gut auf, um bei Bedarf darauf zurŸckgreifen zu kšnnen.

Inhalt
VORSICHTSMASSNAHMEN.............................................	6
Vor dem Anschließen ..........................................................	7

Mode dÕemploi

Nous vous remercions d'avoir achetŽ les enceintes YAMAHA. Pour obtenir les performances optimales de vos enceintes et garantir une longŽvitŽ maximale, lisez attentivement ce mode d'emploi avant d'utiliser les enceintes. Conservez-le en lieu sžr pour pouvoir vous y rŽfŽr er ultŽrieurement.

Table des mati•res
PRECAUTIONS D'USAGE ................................................	9
Avant d'effectuer les connexions.......................................	10
Fiche technique.................................................................	11

Manual de instrucciones

Gracias por escoger el sistema de altavoces YAMAHA. A Þn de aprovechar al m‡ximo las caracter’sticas de los altavoces y obtener un rendimiento y durabilidad —ptimos, lea atentamente este manual antes de utilizar el sistema. Guarde este manual en un lugar seguro para futuras consultas.

êndice
PRECAUCIONES.............................................................	12
Antes de efectuar conexiones ...........................................	13

Technische Daten ...............................................................

Especiﬁcaciones ...............................................................

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, ﬁre or other hazards. These precautions include, but are not limited to, the following:

	Do not open		Water warning
• Do not open the device or attempt to disassemble the internal		• Do not expose the device to rain, use it near water or in damp
	parts or modify them in any way. The device contains no user-		or wet conditions, or place containers on it containing liquids
	serviceable parts. If it should appear to be malfunctioning, dis-		which might spill into any openings.
	continue use immediately and have it inspected by qualiﬁed
	Yamaha service personnel.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the device or other property. These precautions include, but are not limited to, the following:

Location

Connections

•If you use a stand, check the stand’s speciﬁcations and make sure that it is sturdy enough to support the weight of the speaker. You may need to limit the number of people around the placed stand, in order to avoid toppling the device or causing damage to the internal components.

•If you use the TS-80 and TS-90 speaker stands manufactured by Ultimate Systems (sold separately) to support the AX10/ AX12/AX15/AX12M/AX15M speaker models, be sure to keep the following cautions.

–Use the speaker stands with their legs fully opened.

–Place only one speaker on each speaker stand.

–Tighten fastening screws securely.

–Remove the speakers from the stands before moving the stands or adjusting their height.

–Add weight such as sand bags around the stand legs to prevent them from falling over.

–Use the stand at a maximum height of 140 cm.

•If you use a metal socket of the AX15W subwoofer to allow mounting of a satellite speaker, use a pole shorter than 90cm with an outer diameter of 35mm.

•When transporting or moving the device, always use two or more people.

•Before moving the device, remove all connected cables.

•Do not expose the device to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater) to prevent the possibility of panel disﬁguration or damage to the internal components.

•Do not place the device in an unstable position where it might accidentally fall over.

•Before connecting the device to other devices, turn off the power for all devices. Before turning the power on or off for all devices, set all volume levels to minimum.

•Use only speaker cables for connecting speakers to the speaker jacks. Use of other types of cables may result in ﬁre.

•Be sure to observe the ampliﬁer’s rated load impedance (see page 5), particularly when connecting speakers in parallel. Connecting an impedance load outside the ampliﬁer’s rated range can damage the ampliﬁer.

Handling caution

•Always turn AC power to the power ampliﬁer on last in any audio system to avoid speaker damage. When turning power off, the power ampliﬁer should be turned off ﬁrst for the same reason.

ENGLISH

Downloaded from: http://www.usersmanualguide.com/

Yamaha Audio AX15M, AX15W, AX12M, AX12, AX15 User Manual

This product, when used in combination with ampliﬁcation and/or additional loudspeakers, may be capable of producing sound levels that could cause permanent hearing loss.

DO NOT operate at high volume levels or at a level that is uncomfortable. If you experience any discomfort or ringing in the ears, or suspect an hearing loss, you should consult an audiologist.

To protect your speakers

When choosing a power ampliﬁer to use with your speakers, make sure that its power output matches the speakers’ power capacity (refer to the Speciﬁcations on page 5). Even if the ampliﬁer’s power output is lower than the speakers’ PGM (program) power capacity, the speakers may be damaged when clipping of a high input signal occurs.

The following may cause damage to speakers:

•Feedback caused when using a microphone.

•Continuous high sound pressure level produced by electronic instruments.

•Continuous high-power output distorted signals.

•Popping noises caused by turning on equipment, or by connecting or disconnecting system components while the ampliﬁer is turned on.

Poly Switch

All full-range loudspeakers are ﬁtted with a self-resetting poly switch that protects the high-frequency driver from damage caused by excessive power.

If a loudspeaker cabinet loses high-frequency output, immediately remove power from the unit and wait for two to three minutes. They should allow the poly switch to reset. Re-apply power and check the performance of the high-frequency driver before continuing with the power reduced to a level that does not cause the poly switch to interrupt the signal.

•In any system using two or more speakers, be sure to match the connection polarities of all speakers to the ampliﬁer(s) – e.g. always connect “+” to “+” and “-” to “-”. If the polarities are not properly matched the speakers will be driven out of phase and the sound will suffer.

•Use only Neutrik NL4FC plugs for connecting Speakon connectors.

Yamaha cannot be held responsible for damage caused by improper use or modiﬁcations to the device.

*Illustrations in this manual are for explanatory purposes only, and may not match the actual appearance of the product during operation.

*Company names and product names used in this Owner’s Manual are trademarks or registered trademarks of their respective owners.

Before Making Connections

■ Phone Plug Wiring

Phone plugs for connection to the phone jack inputs should be wired as shown to the right. Be sure to use proper speaker cable — NOT shielded instrument or line cable — for all speaker connections.

■ Neutrik NL4FC Plug Wiring

If you will be using the Neutrik connectors for speaker input, wire the plugs as shown to the right. Be sure to use proper speaker cable — NOT shielded instrument or line cable — for all speaker connections.

2– (NO USE)

2+ (NO USE) 1+ : HOT(+)

1– :COLD (–)

Neutrik NL4FC connector

Downloaded from: http://www.usersmanualguide.com/

+ 4 hidden pages