Yamaha PSR-E333, YPT-330 User Manual

DIGITAL KEYBOARD

DIGITAL KEYBOARD

Owner’s Manual

Thank you for purchasing this Yamaha Digital Keyboard!

We recommend that you read this manual carefully so that you can fully take advantage of the
advanced and convenient functions of the instrument.
We also recommend that you keep this manual in a safe and handy place for future reference.
Before using the instrument, be sure to read “PRECAUTIONS” on pages 4–5.

EN

(US only)

LIMITED 1-YEAR WARRANTY ON

PORTABLE KEYBOARDS

(NP, NPV, PSRE, YPG AND YPT SERIES)

Thank you for selecting a Yamaha product. Yamaha products are designed and manufactured to provide a high level of defect-free
performance. Yamaha Corporation of America (“Yamaha”) is proud of the experience and craftsmanship that goes into each and every
Yamaha product. Yamaha sells its products through a network of reputable, specially authorized dealers and is pleased to offer you, the
Original Owner, the following Limited Warranty, which applies only to products that have been (1) directly purchased from Yamaha’s
authorized dealers in the fifty states of the USA and District of Columbia (the “Warranted Area”) and (2) used exclusively in the Warranted
Area. Yamaha suggests that you read the Limited Warranty thoroughly, and invites you to contact your authorized Yamaha dealer or
Yamaha Customer Service if you have any questions.

Coverage: Yamaha will, at its option, repair or replace the product covered by this warranty if it becomes defective, malfunctions or

otherwise fails to conform with this warranty under normal use and service during the term of this warranty, without charge for labor or
materials. Repairs may be performed using new or refurbished parts that meet or exceed Yamaha specifications for new parts. If
Yamaha elects to replace the product, the replacement may be a reconditioned unit. You will be responsible for any installation or
removal charges and for any initial shipping charges if the product(s) must be shipped for warranty service. However, Yamaha will pay
the return shipping charges to any destination within the USA if the repairs are covered by the warranty. This warranty does not cover (a)
damage, deterioration or malfunction resulting from accident, negligence, misuse, abuse, improper installation or operation or failure to
follow instructions according to the Owner’s Manual for this product; any shipment of the product (claims must be presented to the
carrier); repair or attempted repair by anyone other than Yamaha or an authorized Yamaha Ser vice Center; (b) any unit which has been
altered or on which the serial number has been defaced, modified or removed; (c) normal wear and any periodic maintenance; (d)
deterioration due to perspiration, corrosive atmosphere or other external causes such as extremes in temperature or humidity; (e)
damages attributable to power line surge or related electrical abnormalities, lightning damage or acts of God; or (f) RFI/EMI (Interference/
noise) caused by improper grounding or the improper use of either certified or uncertified equipment, if applicable. Any evidence of
alteration, erasing or forgery of proof-of-purchase documents will cause this warranty to be void. This warranty covers only the Original
Owner and is not transferable.

In Order to Obtain Warranty Service: Warranty service will only be provided for defective products within the Warranted

Area. Contact your local authorized Yamaha dealer who will advise you of the procedures to be followed. If this is not successful, contact
Yamaha at the address, telephone number or website shown below. Yamaha may request that you send the defective product to a local
authorized Yamaha Servicer or authorize return of the defective product to Yamaha for repair. If you are uncertain as to whether a dealer
has been authorized by Yamaha, please contact Yamaha’s Service Department at the number shown below, or check Yamaha’s website
at www.Yamaha.com
the problem(s) requiring service, together with the original or a machine reproduction of the bill of sale or other dated, proof-of-purchase
document describing the product, as evidence of warranty coverage. Should any product submitted for warranty service be found
ineligible therefore, an estimate of repair cost will be furnished and the repair will be accomplished only if requested by you and upon
receipt of payment or acceptable arrangement for payment.

Limitation of Implied Warranties and Exclusion of Damages: ANY IMPLIED WARRANTIES, INCLUDING

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TO THE
APPLICABLE PERIOD OF TIME SET FORTH ABOVE. YAMAHA SHALL NOT BE RESPONSIBLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR FOR DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE, DAMAGE TO ANY OTHER
EQUIPMENT OR OTHER ITEMS AT THE SITE OF USE OR INTERRUPTION OF PERFORMANCES OR ANY CONSEQUENCES.
YAMAHA’S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, AT
YAMAHA’S OPTION. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION
MAY NOT APPLY TO YOU. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to
state. This is the only express warranty applicable to the product specified herein; Yamaha neither assumes nor authorizes anyone to
assume for it any other express warranty.

If you have any questions about service received or if you need assistance in locating an authorized Yamaha Servicer, please contact:

. Product(s) shipped for service should be packed securely and must be accompanied by a detailed explanation of

CUSTOMER SERVICE

Yamaha Corporation of America

6600 Orangethorpe Avenue, Buena Park, California 90620-1373

Telephone: [phone]

www.yamaha.com

Do not return any product to the above address without a written Return Authorization issued by YAMAHA.

©2009 Yamaha Corporation of America.

PSR-E333/YPT-330 Owner’s Manual

2

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply (adapter).
DO NOT connect this product to any power supply or adapter other
than one described in the manual, on the name plate, or specifically
recommended by Yamaha.

WARNING:

walk on, trip over, or roll anything over power or connecting cords of any
kind. The use of an extension cord is not recommended! If you must use an
extension cord, the minimum wire size for a 25’ cord (or less) is 18 AWG.
NOTE: The smaller the AWG number, the larger the current handling
capacity. For longer extension cords, consult a local electrician.

This product should be used only with the components supplied or; a
cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is
used, please observe all safety markings and instructions that accom­pany the accessory product.

Do not place this product in a position where anyone could

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be correct at
the time of printing. However, Yamaha reserves the right to change or
modify any of the specifications without notice or obligation to update
existing units.

This product, either alone or in combination with an amplifier and
headphones or speaker/s, may be capable of producing sound levels
that could cause permanent hearing loss. DO NOT operate for long
periods of time at a high volume level or at a level that is uncomfort­able. If you experience any hearing loss or ringing in the ears, you
should consult an audiologist.
IMPORTANT: The louder the sound, the shorter the time period before
damage occurs.

Some Yamaha products may have benches and / or accessory
mounting fixtures that are either supplied with the product or as
optional accessories. Some of these items are designed to be dealer
assembled or installed. Please make sure that benches are stable and
any optional fixtures (where applicable) are well secured BEFORE
using.
Benches supplied by Yamaha are designed for seating only. No other
uses are recommended.

NOTICE:

Service charges incurred due to a lack of knowledge relating to how a
function or effect works (when the unit is operating as designed) are
not covered by the manufacturer’s warranty, and are therefore the
owners responsibility. Please study this manual carefully and consult
your dealer before requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe and envi­ronmentally friendly. We sincerely believe that our products and the
production methods used to produce them, meet these goals. In keep­ing with both the letter and the spirit of the law, we want you to be
aware of the following:

Battery Notice:

This product MAY contain a small non-rechargeable battery which (if
applicable) is soldered in place. The average life span of this type of bat­tery is approximately five years. When replacement becomes necessary,
contact a qualified service representative to perform the replacement.

This product may also use “household” type batteries. Some of these
may be rechargeable. Make sure that the battery being charged is a
rechargeable type and that the charger is intended for the battery being
charged.

When installing batteries, never mix old batteries with new ones, and
never mix different types of batteries. Batteries MUST be installed cor­rectly. Mismatches or incorrect installation may result in overheating and
battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery. Keep all bat­teries away from children. Dispose of used batteries promptly and as
regulated by the laws in your area. Note: Check with any retailer of
household type batteries in your area for battery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or for some rea­son its useful life is considered to be at an end, please observe all
local, state, and federal regulations that relate to the disposal of prod­ucts that contain lead, batteries, plastics, etc. If your dealer is unable
to assist you, please contact Yamaha directly.

NAME PLATE LOCATION:

The name plate is located on the bottom of the product. The model
number, serial number, power requirements, etc., are located on this
plate. You should record the model number, serial number, and the
date of purchase in the spaces provided below and retain this manual
as a permanent record of your purchase.

Model

Serial No.

Purchase Date

92-BP (bottom)

PLEASE KEEP THIS MANUAL

PSR-E333/YPT-330 Owner’s Manual

3

PRECAUTIONS

Power supply/AC power adaptor

Do not open

Water warning

Fire warning

Battery

If you notice any abnormality

Power supply/AC power adaptor

Location

Connections

Handling caution

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short­circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

• Do not place the power cord near heat sources such as heaters or radiators, and
do not excessively bend or otherwise damage the cord, place heavy objects on it,
or place it in a position where anyone could walk on, trip over, or roll anything
over it.

• Only use the voltage specified as correct for the instrument. The required voltage
is printed on the name plate of the instrument.

• Use the specified adaptor (page 68) only. Using the wrong adaptor can result in
damage to the instrument or overheating.

• Check the electric plug periodically and remove any dirt or dust which may have
accumulated on it.

• This instrument contains no user-serviceable parts. Do not open the instrument
or attempt to disassemble or modify the internal components in any way. If it
should appear to be malfunctioning, discontinue use immediately and have it
inspected by qualified Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet
conditions, or place containers on it containing liquids which might spill into any
openings. If any liquid such as water seeps into the instrument, turn off the power
immediately and unplug the power cord from the AC outlet. Then have the
instrument inspected by qualified Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit.
A burning item may fall over and cause a fire.

• Always replace all batteries at the same time. Do not use new batteries together
with old ones.

• Do not mix battery types, such as alkaline batteries with manganese batteries, or
batteries from different makers, or different types of batteries from the same
maker, since this can cause overheating, fire, or battery fluid leakage.

• Do not tamper with or disassemble batteries.

• Do not dispose of batteries in fire.

• Do not attempt to recharge batteries that are not intended to be charged.

• Keep batteries away from children.

• If the batteries do leak, avoid contact with the leaked fluid. If the battery fluid
should come in contact with your eyes, mouth, or skin, wash immediately with
water and consult a doctor. Battery fluid is corrosive and may possibly cause loss
of sight or chemical burns.

• Always make sure all batteries are inserted in conformity with the +/- polarity
markings. Failure to do so might result in overheating, fire, or battery fluid
leakage.

• When the batteries run out, or if the instrument is not to be used for a long time,
remove the batteries from the instrument to prevent possible leakage of the battery
fluid.

• When one of the following problems occur, immediately turn off the power switch
and disconnect the electric plug from the outlet. (If you are using batteries,
remove all batteries from the instrument.) Then have the device inspected by
Yamaha service personnel.

• The power cord or plug becomes frayed or damaged.

• It emits unusual smells or smoke.

• Some object has been dropped into the instrument.

• There is a sudden loss of sound during use of the instrument.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the
instrument or other property. These precautions include, but are not limited to, the following:

• Do not connect the instrument to an electrical outlet using a multiple-connector.
Doing so can result in lower sound quality, or possibly cause overheating in the
outlet.

• When removing the electric plug from the instrument or an outlet, always hold the
plug itself and not the cord. Pulling by the cord can damage it.

• Remove the electric plug from the outlet when the instrument is not to be used for
extended periods of time, or during electrical storms.

• Do not place the instrument in an unstable position where it might accidentally
fall over.

• Before moving the instrument, remove all connected cables.

• When setting up the product, make sure that the AC outlet you are using is easily
accessible. If some trouble or malfunction occurs, immediately turn off the power
switch and disconnect the plug from the outlet. Even when the power switch is
turned off, electricity is still flowing to the product at the minimum level. When
you are not using the product for a long time, make sure to unplug the power cord
from the wall AC outlet.

• Use only the stand specified for the instrument. When attaching the stand or rack,
use the provided screws only. Failure to do so could cause damage to the internal
components or result in the instrument falling over.

PSR-E333/YPT-330 Owner’s Manual

4

• Before connecting the instrument to other electronic components, turn off the
power for all components. Before turning the power on or off for all components,
set all volume levels to minimum.

• Be sure to set the volumes of all components at their minimum levels and
gradually raise the volume controls while playing the instrument to set the desired
listening level.

• Do not insert a finger or hand in any gaps on the instrument.

• Never insert or drop paper, metallic, or other objects into the gaps on the panel or
keyboard. This could cause physical injury to you or others, damage to the
instrument or other property, or operational failure.

• Do not rest your weight on, or place heavy objects on the instrument, and do not
use excessive force on the buttons, switches or connectors.

• Do not use the instrument/device or headphones for a long period of time at a
high or uncomfortable volume level, since this can cause permanent hearing loss.
If you experience any hearing loss or ringing in the ears, consult a physician.

DMI-3 1/2

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.

The serial number of this product may be found on the bottom of the
unit. You should note this serial number in the space provided below
and retain this manual as a permanent record of your purchase to aid
identification in the event of theft.

Model No.

Serial No.

(bottom)

Always turn the power off when the instrument is not in use.
Even when the power switch is in standby status, electricity is still flowing to the instrument at the minimum level. When you are not using the instrument for a long time, make

sure you unplug the power cord from the wall AC outlet.
Make sure to discard used batteries according to local regulations.

NOTICE

To avoid the possibility of malfunction/damage to the product, damage to data, or damage to other property, follow the
notices below.

 Handling and Maintenance

• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio
may generate noise.

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day)
to prevent the possibility of panel disfiguration, damage to the internal components or unstable operation. (Verified operating temperature range: 5° –
40°C, or 41° – 104°F.)

• Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.

• When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths.

 Saving data

• Some data items (page 40) are automatically saved as backup data in the internal memory even if you turn the power off. Saved data may be lost due to
malfunction or incorrect operation. Save important data to external device such as a computer (page 45).

 About copyrights

• Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal
use.

• This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use
others’ copyrights. Such copyrighted materials include, without limitation, all computer software, style files, MIDI files, WAVE data, musical scores and
sound recordings. Any unauthorized use of such programs and contents outside of personal use is not permitted under relevant laws. Any violation of
copyright has legal consequences. DON’T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.

 About functions/data bundled with the instrument

• Some of the preset songs have been edited for length or arrangement, and may not be exactly the same as the original.

 About this manual

• The illustrations and LCD screens as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your
instrument.

• Windows is a registered trademark of Microsoft

®

Corporation in the United States and other countries.

• Apple, Mac and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries.

• The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.

DMI-3 2/2

PSR-E333/YPT-330 Owner’s Manual

5

About the Manuals

Insert the music
rest into the slots
as shown.

This instrument has the following documents and instructional materials.

 Included Documents

Owner’s Manual (this book)

 Online Materials (Downloadable from the web)

The following instructional materials are available for downloading from the Yamaha website.

Yamaha Manual Library http://www.yamaha.co.jp/manual/
Access the Yamaha Manual Library, then enter your model name (PSR-E333, for example) in the Model Name
area to search the manuals.

MIDI Data Format

This document contains both the MIDI Data Format and the MIDI Implementation Chart.

MIDI Basics (only in English, French, German and Spanish)

If you want to know more about MIDI and how to use it, refer to this introductory book.

Yamaha Online Member https://member.yamaha.com/myproduct/regist/
You can refer to the music score in the Song Book (free downloadable scores). To obtain the Song Book, complete
the user registration at the above website.

Song book (only in English, French, German and Spanish)

Formats and functions

GM System Level 1

“GM System Level 1” is an addition to the MIDI
standard which ensures that any GM-compatible
music data can be accurately played by any GM­compatible tone generator, regardless of manufac­turer. The GM mark is affixed to all software and
hardware products that support GM System Level.

XGlite

As its name implies, “XGlite” is a simplified ver­sion of Yamaha’s high-quality XG tone generation
format. Naturally, you can play back any XG song
data using an XGlite tone generator. However,
keep in mind that some songs may play back dif­ferently compared to the original data, due to the
reduced set of control parameters and effects.

STYLE FILE

The Style File Format combines all of
Yamaha’s auto accompaniment know-how into
a single unified format.

USB

USB is an abbreviation for Universal Serial
Bus. It is a serial interface for connecting a
computer with peripheral devices. It allows
“hot swapping” (connecting peripheral devices
while the power to the computer is on).

Touch Response

The exceptionally natural Touch Response fea­ture, with a convenient front panel on/off
switch, gives you maximum expressive level
control over the voices.

Supplied Accessories Using the music rest

• Owner’s manual (this book)

• Music rest

• AC Power Adaptor

* May not be included depending on your particular area.

Please check with your Yamaha dealer.

• My Yamaha Product User Registration

* The PRODUCT ID on the sheet will be needed when

you fill out the User Registration form.

PSR-E333/YPT-330 Owner’s Manual

6

Contents

About the Manuals................................................ 6

Formats and functions .......................................... 6

Supplied Accessories ........................................... 6

Using the music rest ............................................. 6

Introduction

Setting Up 8

Power Requirements ............................................ 8

Connecting headphones and external audio

equipment ........................................................ 9

Connecting a footswitch ....................................... 9

Turn on the power ................................................ 9

Auto Power Off function........................................ 9

Removing the protective film ................................ 9

Panel Controls and Terminals 10

Basic Operation and Displays 12

Basic Operation .................................................. 12

Display................................................................ 13

Reference

Try Playing a Variety of Instrument Voices 14

Using the Lesson Feature 28

Keys to Success..................................................28

Listening, Timing and Waiting ............................. 31

Phrase Repeat ....................................................33

A-B Repeat.......................................................... 34

Mute .................................................................... 34

Using the Metronome.......................................... 35

Changing the Tempo........................................... 35

Record Your Own Performance 36

Recording............................................................ 36

Recording to a Specific track .............................. 37

Deleting User Songs ........................................... 39

Backup and Initialization 40

Backup ................................................................ 40

Initialization ......................................................... 40

Function Settings 41

Select the item and change the value.................41

Connecting to a Computer 44

Connecting a Personal Computer .......................44

Transferring data between the instrument and

a computer ..................................................... 45

Registering Style Files ........................................ 46

Select and Play a Voice...................................... 14

Playing the Grand Piano Voice........................... 15

Try playing with enhanced, dynamic sound

(Ultra-Wide Stereo)........................................ 15

Touch Response Sensitivity ............................... 15

Adding Harmony................................................. 16

Playing Two Voices Simultaneously—Dual........ 17

Playing Different Voices with the Left and Right

Hands—Split.................................................. 17

Play with a Style 18

Select a Style Rhythm ........................................ 18

Play Along with a Style ....................................... 19

Pattern Variation (Sections)................................ 20

Chords ................................................................ 21

Looking up Chords Using the Chord Dictionary . 22

Try Playing a Song with a Style!......................... 23

Play Using the Music Database.......................... 24

Playing Songs 25

Select and Listen to a Specific Song .................. 25

Listening to the Demo Songs ............................. 26

BGM Playback.................................................... 26

Song Fast Forward, Fast Reverse, and Pause .. 27

Changing the Melody Voice................................ 27

Appendix

Troubleshooting............................................. 47

Song Book Sample ........................................ 48

Voice List ........................................................ 58

Drum Kit List ..................................................62

Style List ......................................................... 64

Music Database List ......................................65

Song List......................................................... 66

Effect Type List .............................................. 67

Specifications................................................. 68

Index................................................................ 69

PSR-E333/YPT-330 Owner’s Manual

7

Setting Up

WARNING

CAUTION

AC outlet

AC power

adaptor

3

2

NOTICE

WARNING

NOTICE

Introduction

Be sure to do the following operations BEFORE turning on the power.

Power Requirements

Although the instrument will run either from an optional AC adaptor or batteries, Yamaha recommends use of an
AC adaptor whenever possible. An AC adaptor is more environmentally friendly than batteries and does not
deplete resources.

Using an AC Power Adaptor

1 Make sure that the [ ] (Standby/On) switch of the

instrument is off (the backlit display is off).

• Use the specified adaptor (page 68). The use of other
adaptors may result in irreparable damage to both the
adaptor and the instrument.

2 Connect the AC power adaptor to the power supply

jack.

3 Plug the AC adaptor into an AC outlet.

• Unplug the AC Power Adaptor when not using the
instrument, or during electrical storms.

Using Batteries

1 Open the battery compartment cover located on the

instrument’s bottom panel.

2 Insert the six new alkaline batteries, being careful

to follow the polarity markings on the side of the
compartment.

3 Replace the compartment cover, making sure that it

locks firmly in place.

• Never connect or disconnect the AC power adaptor when the
batteries are installed in the instrument and the power is on.
Doing so will turn the power off, possibly resulting in loss of
the data being transferred as well as the data currently in the
transfer destination during transferring or recording of data.

PSR-E333/YPT-330 Owner’s Manual

8

For battery operation the instrument requires six 1.5V
“AA” size, LR6 or equivalent batteries. (Alkaline batter­ies are recommended.) When battery power becomes too
low for proper operation, the volume may be reduced, the
sound may be distorted, and other problems may occur.
When this happens, make sure to replace all batteries,
following the precautions listed below.
If necessary, also make sure to save all important User
data (see page 45), since custom panel settings are lost
when the batteries are removed.

• Make sure to install the batteries with the proper orientation,
maintaining the correct polarity (as shown). Incorrect battery
installation may result in heat, fire and/or leaking of corrosive
chemicals.

• When the batteries run down, replace them with a complete set of
six new batteries. NEVER mix old and new batteries. Do not use
different kinds of batteries (e.g. alkaline and manganese) at the
same time.

• If the instrument is not to be in use for a long time, remove the
batteries from it, in order to prevent possible fluid leakage from
the battery.

• Use alkaline batteries for this instrument. Other types of batteries
(including rechargeable batteries) may have sudden drops of
power when battery power becomes low, possibly resulting in
loss of data in the flash memory.

• Please use the power adaptor when transferring data to flash
memory. Batteries (including rechargeable types) can be drained
rapidly by this type of operation. If the batteries do become
drained during a data transfer, both the data being transferred
and the data currently in the transfer destination will be lost.

Make all necessary connections BEFORE turning the power on.

CAUTION

CAUTION

CAUTION

Setting Up

Connecting headphones and

external audio equipment

You can connect the PHONES/OUTPUT jack to a set
of headphones, keyboard amplifier, stereo system,
mixer, tape recorder, or other line-level audio device
to send the instrument’s output signal to that device.

The internal speakers are automatically shut off when
a plug is inserted into this jack. The PHONES/OUT­PUT jack also functions as an external output.

NOTE

• You can set the Master equalizer (EQ) which is provided to
give you the best possible sound when listening through dif­ferent reproduction systems. The Master equalizer (EQ) can
be set in the Function settings (page 42 Function 023).

• Avoid listening with the headphones at high volume for
long periods of time; doing so may not only result in ear
fatigue, it may be damaging to your hearing.

• To prevent damage to the speakers, set the volume of the
external devices at the minimum setting and turn power off
the devices before connecting them. Failure to observe
these precautions may result in electric shock or equip­ment damage. Also, be sure to set the volumes of all
devices at their minimum levels and gradually raise the vol­ume controls while playing the instrument to set the
desired listening level.

Connecting a footswitch

Turn on the power

Turn down the volume by turning the [MASTER
VOLUME] control to the left and press the [ ]
(Standby/On) switch to turn on the power. While
playing the keyboard, adjust the volume level by using
the [MASTER VOLUME] control. Pressing the [ ]
(Standby/On) switch again turns the power off.

• When using a power adaptor, even when the power is off, a
small amount of electricity is still being consumed by the
instrument. When you are not using the instrument for a long
time, make sure to unplug the AC power adaptor from the wall
AC outlet, and/or remove the batteries from the instrument.

Auto Power Off function

To prevent unnecessary power consumption, this instru­ment features an Auto Power Off function that automati­cally turns the power off if the instrument is not operated
for a specified period of time. The amount of time that
will elapse before the power is automatically turned off
can be set in the Function (page 43 Function 040).

Setting range: 5/10/15/30/60/120/OFF (minutes)
Default setting: 30 (minutes)

To disable the Auto Power Off function
While holding down the lowest key, press the [ ]
(Standby/On) switch to turn on the power. Alternately
select “Off” in the Function settings.

The sustain function lets you produce a natural sustain
as you play by pressing an optional footswitch. Plug
the Yamaha FC4 or FC5 footswitch into the SUS­TAIN jack and use it to switch sustain on and off.

NOTE

• Make sure that the footswitch plug is properly connected to
the SUSTAIN jack before turning on the power.

• Do not press the footswitch while turning the power on. Doing
this changes the recognized polarity of the footswitch, result­ing in reversed footswitch operation.

NOTE

• The data and settings are always backed up, and are main­tained even when the power is turned off. For information on
the backup parameters, see page 40.

Removing the protective film

Remove the transparent protective film that was applied
to the display prior to shipment from the factory.

PSR-E333/YPT-330 Owner’s Manual

9

Panel Controls and Terminals

w

q

e

r

t

!5

!7

!6

!8

@8

Front Panel

Music Database List

(page 65)

Front Panel

q [ ] (Standby/On) switch.....................................page 9

w [MASTER VOLUME] control ................................ page 9

e [1 LISTENING 2 TIMING 3 WAITING] button ....page 31

r [KEYS TO SUCCESS] button.............................page 28

t [PHRASE REPEAT] button ................................page 33

In the Lesson mode

y PA RT

[L] button ............................................................page 32

[R] button............................................................ page 32

In the Recording mode

y [REC TRACK 2] button.......................................page 37

[REC TRACK 1] button.......................................page 37

u [METRONOME] button .......................................page 35

i [TEMPO/TAP] button.......................................... page 35

o [SONG] button............................................ pages 12, 25

!0 [VOICE] button ........................................... pages 12, 14

!1 [STYLE] button ........................................... pages 12, 18

!2 Number buttons [0]–[9], [+/YES], [-/NO]........... page 12

!3 [FUNCTION] button............................................page 41

!4 [DEMO/BGM] button .......................................... page 26

In the Song mode

!5 [A-B REPEAT] button.........................................page 34

!6 [REW] button...................................................... page 27

!7 [FF] button .......................................................... page 27

!8 [PAUSE] button...................................................page 27

In the Style mode

!5 [ACMP ON/OFF] button .....................................page 19

!6 [INTRO/ENDING/rit.] button ............................... page 20

!7 [MAIN/AUTO FILL] button..................................page 20

!8 [SYNC START] button ........................................ page 19

!9 [START/STOP] button ................................ pages 12, 25

@0 [REC] button.......................................................page 36

@1 [PORTABLE GRAND] button...

@2 [MUSIC DATABASE] button...............................page 24

@3 [ULTRA-WIDE STEREO] button ........................ page 15

@4 [SPLIT] button .................................................... page 17

@5 [DUAL] button..................................................... page 17

@6 [HARMONY] button............................................page 16

@7 [TOUCH] button ..................................................page 15

@8 Drum Kit icons ................................................... page 14

Rear Panel

@9 SUSTAIN jack ....................................................... page 9

#0 USB terminal ......................................................page 44

#1 PHONES/OUTPUT jack........................................ page 9

#2 DC IN jack ............................................................. page 8

..........................page 15

PSR-E333/YPT-330 Owner’s Manual

10

GrandPno

001

001

!4

!9 @0

!3

!1

u

!0

o

i

@3 @4 @5 @6 @7

@2@1

!2

y

#2#1@9 #0

Rear Panel

Display (page 13) Song List (page 66) Style List (page 64)

Voice List (page 58)

C3 (Middle C)

The “Press & Hold” Symbol

Buttons having this indication can
be used to call up an alternate

function when the relevant button
is pressed and held. Hold down this button
until the function is called up.

Panel Controls and Terminals

PSR-E333/YPT-330 Owner’s Manual

11

Basic Operation and Displays

GrandPno

001

001

321

Display
(page 13)

Number buttons [0]–[9]

The number buttons can be
used to directly enter a
Song, Style or Voice num­ber or parameter value.
For numbers that start with
one or two zeroes, the first
zeroes can be omitted.

Example:
Selecting Voice 002,
Bright Piano.

Press number buttons
[0], [0], [2].

[+], [-] buttons

Press the [+] button briefly to increase the value
by 1, or press the [-] button briefly to decrease
the value by 1. Press and hold either button to
continuously increase or decrease the value in
the corresponding direction.

Press briefly to
decrease.

Press briefly to
increase.

Basic Operation

Press a button to select a basic function: Voice, Style or Song. To change the instrument voice that sounds when
you play the keyboard, press the [VOICE] button. If you want to play along with auto accompaniment, press the
[STYLE] button. If you want to listen to a song, press the [SONG] button.

Select a basic function.

1

[SONG] button ..............To select a Song.

[VOICE] button.............. To select a Voice.

[STYLE] button.............. To select a Style.

When you select a basic function, the name and number of the currently selected Song, Style or Voice is shown.

Select an item or value by using the number buttons [0]–[9], [+], [-].

2

Refer to the Song, Voice and Style Lists on pages 58–66.

Start a function or play the keyboard.

3

Voice ............................. Play the keyboard.

Song ............................. Press the [START/STOP] button to play Songs.

Style.............................. Press the [START/STOP] button to play the Style rhythm.

You can stop playback at any time by pressing the [START/STOP] button.

PSR-E333/YPT-330 Owner’s Manual

12

Display

GrandPno

001

003

Indicate the operating condition of the
instrument (page 12).

SONG/VOICE/STYLE

Displays the melody
and chord notes of a
Song when the Song
lesson function is in
use, or the notes of
chords you specify
when the Dictionary
function is in use. At
other times the notes
you play on the key­board are displayed.

Notation

• Any notes occurring below or
above the staff are indicated by
“8va” in the notation.

• For a few specific chords, not all
notes may be shown in the nota­tion section of the display. This is
due to space limitations in the dis­play.

Appears when the Keys to Suc­cess function is on (page 28).

Appears when the Phrase
Repeat function is on (page

33).

Song:

✩✩✩
✩✩✩
✩✩✩
✩✩✩

The number of stars
depends on the number
of passed steps.

Step:

✩

KEYS TO SUCCESS

PHRASE REPEAT

Passing Status

Appears when Touch Response is
on (page 15).

Appears when ULTRA-WIDE
STEREO is on (page 15).

Appears when the auto accompa-
niment is on (page 19).

Appears when the Split function is
on (page 17).

Appears when the Dual function is
on (page 17).

Appears when the Harmony func-
tion is on (page 16).

TOUCH RESPONSE

ULTRA-WIDE STEREO

ACMP ON

SPLIT

DUAL

HARMONY

Indicates the name of
the chord currently
being played back, or
the name of the chord
being played on the keyboard.

Indicates the current measure
during playback of a Song.

Chord Display

Measure

Indicates the Function number when
the Function is in use.

Indicates notes currently being
played. Indicates the melody and
chord notes of a Song when the Song
lesson function is in use. Also indi­cates the notes of a chord—either
when playing a chord or when using
the Dictionary function.

Function

Keyboard Display

027

Information related to the Song/
recording tracks is shown here.
(See pages 34 and 36.)

Lit: Track contains data

Unlit: Track is muted or contains no data

Flashing: Track is selected as recording

track

Indicates the beat of the current
Style or Song with flashing
arrows.

Song/recording track display

Beat Display

The Main display shows all of the current basic settings for Song, Style and
Voice. It also includes a range of indicators that show the on/off status for
various functions.

Basic Operation and Displays

NOTE

003

PSR-E333/YPT-330 Owner’s Manual

13

GrandPno

001

001

Voic e

Grand Piano Voice Ultra-Wide

Stereo

Touch Response

Percussion and drum icons

GrandPno

001

001

Voice name
The Voice shown here becomes the
Main Voice for the instrument.

Voice number

Reference

Try Playing a Variety of Instrument Voices

This instrument features a variety of realistic, built-in voices. The grand piano Voice is
automatically selected whenever the power is turned on, but you can easily change
this to guitar, drums, or any of an extensive range of voices.

Select and Play a Voice

Press the [VOICE] button and then select the desired Voice, referring to the section “Basic Operation” on page 12
for instructions.
Refer to the Voice List on page 58.

Preset Voice Types

001–140 Instrument Voices

Various drum and percussion sounds are assigned to individual keys, from

141–153 (Drum Kit)

which they can be played. Details on the instruments and key assignments of
each Drum Kit can be found in the Drum Kit List on page 62.

154–497 XGlite Voices

One Touch Setting (OTS)

000

The One Touch Setting feature automatically selects the most suitable Voice
for you when you select a Style or Song. Simply select Voice number “000” to
activate this feature.

PSR-E333/YPT-330 Owner’s Manual

14

Try Playing a Variety of Instrument Voices

NOTE

GrandPno

001

Appears when Ultra-Wide Stereo is on.

NOTE

GrandPno

001

Appears when Touch Response is on.

Playing the Grand Piano Voice

When you simply want to play a piano Voice, all you have to do is press one convenient button.

Press the [PORTABLE GRAND] button.
The Voice “Grand Piano” will automatically be selected as the Main Voice.

Try playing with enhanced, dynamic sound (Ultra-Wide Stereo)

You can play the keyboard with a spacious, dynamic sound effect that gives you the sensation of hearing the sound
outside of the speakers.
Turn on the Ultra-Wide Stereo effect, and hear the sound expand around you—as if the speaker position is outside
of the instrument.

Press the [ULTRA-WIDE STEREO] button.

To turn ULTRA-WIDE STEREO off, press the [ULTRA-WIDE STEREO] button
again.

Touch Response Sensitivity

Press the [TOUCH] button to turn Touch Response on. When Touch Response is on,
you can control the volume of notes according to how hard you play the keys.
Touch Response is normally on.

Press the [TOUCH] button again to turn Touch Response off. When Touch Response
is off, the same volume will be produced no matter how hard you play the keys.

• The wide effect type can be
set in the Function settings
(page 42 Function 024).

SHORTCUT
You can jump directly to the
Functions Settings by press­ing and holding the [ULTRA­WIDE STEREO] button for
longer than a second.

• The Touch Response func­tion cannot be used for
some Voices (such as
organ), even if the Touch
Response icon appears in
the display.

• When Touch Response is on
you can adjust the key­board’s sensitivity to dynam­ics in three steps in the
Function settings (page 41
Function 006).

SHORTCUT
You can jump directly to the
Function settings by press­ing and holding the
[TOUCH] button for longer
than a second.

PSR-E333/YPT-330 Owner’s Manual

15

Try Playing a Variety of Instrument Voices

NOTE

GrandPno

001

Appears when
Harmony is on.

NOTE

Trio

02

Currently selected Harmony type

NOTE

Press the right-hand keys while playing
chords in the auto accompaniment
range of the keyboard when auto
accompaniment is on (page 19).

Keep holding
down the keys.

Hold down two keys.

Play the keys.

Adding Harmony

This feature adds harmony notes as well as tremolo or echo effects to the Main Voice.

Press the [HARMONY] button to turn Harmony on.

1

When you don’t want to add harmony notes, press the [HARMONY] button
again to turn Harmony off.

Press and hold the [HARMONY] button for longer than a second.

2

“HarmType” appears in the display for a few seconds, followed by the Harmony
Type.

• When you press the [HAR­MONY] button to turn this
feature on, the appropriate
Harmony type for the cur­rently selected Main Voice is
automatically selected.

• You can also access the
Harmony Type setting dis­play by pressing the [FUNC­TION] button several times
(page 42 Function 025).

• Harmony will be turned off if
the Chord Dictionary func­tion is used.

Select a desired Harmony type by using the number buttons

3

[0]–[9], [+], [-].

Refer to the Harmony Type list on page 67.
Try playing the keyboard with the Harmony function. The effect and operation
of each Harmony Type is different—refer to the section “How to sound each
Harmony type” below as well as the Harmony Type list for details.

How to sound each Harmony type

• Harmony type 01–05 • Harmony type 13–19 (Tremolo)

• Harmony type 06–12 (Trill) • Harmony type 20–26 (Echo)

You can adjust the Harmony Volume in the Function Settings (page 42 Function

026).

PSR-E333/YPT-330 Owner’s Manual

16

• The Harmony notes can be
added only to the Main
Voice, not to Dual or Split
Voices.

• The keys left of the Split
Point of the keyboard pro­duce no Harmony notes
when auto accompaniment
is on (ACMP ON is lit).

Try Playing a Variety of Instrument Voices

Two Voices sound at the same time

NOTE

Flute

001

Appears when
dual is on

36 48

60 72 84

Split Voice

Main Voice and Dual Voice

Split Point...... default setting: 54 (F#2)

NOTE

Appears when
Split is on.

Playing Two Voices Simultaneously—Dual

You can select a second Voice which will play in addition to the Main Voice selected on page 12. This second
Voice is known as the Dual Voice.

Press the [DUAL] button to turn the Dual function on.
When Dual is on, you can play a Dual Voice in a layer with the Main Voice.
To turn the Dual Voice off and play only the Main Voice, press the [DUAL] button
again.

• The Dual Voice setting can
be changed in the Function
settings (page 42 Function

011) .

SHORTCUT
You can jump directly to the
Function settings by pressing
and holding the [DUAL] button
for longer than a second.

• When you select a Voice of
the “DUAL” category
(123–132), Dual is turned on
automatically.

Playing Different Voices with the Left and Right Hands—Split

In the Split mode you can play different Voices to the left and right of the keyboard “Split Point.”
The main and Dual Voices can be played to the right of the Split Point, while the Voice played to the left of the
Split Point is known as the “Split Voice”

Press the [SPLIT] button to turn the Split function on.
When Split is on you can play a Split Voice to the left of the Split Point.
When you don’t want to play a Split Voice, press the [SPLIT] button to turn Split off.

Choir

001

• The Split Voice setting can
be changed in the Function
settings (page 42 Function
015 ).

SHORTCUT
You can jump directly to the
Function settings by pressing
and holding the [SPLIT] button
for longer than a second.

• The Split Point setting can
be changed in the Function
Settings (page 41 Function

005).

Adding other effects to the sound

You can also play the sounds of the instrument adding Reverb, Chorus and Sustain.
The best-suited Reverb and Chorus type is automatically selected whenever you select a Song or Style, but you
can select any of the available Reverb or Chorus Types. These effects can be set in the Function settings (page

42). Refer to the Reverb and Chorus Type lists on page 67 for details.

Reverb........................This effect adds the ambience of a room or concert hall to the sound.

Chorus........................This effect makes the Voice sound richer, warmer and more spacious.

Panel Sustain .............This function adds a fixed sustain to the keyboard Voices.

The sustain function can also be applied with the optional footswitch (page 9).

PSR-E333/YPT-330 Owner’s Manual

17

Play with a Style

GrandPno

001

001

5

Press the [STYLE] button to access the
Style Functions (printed below).

2

1

3

NOTE

8BtModrn

001

001

Style number Style name

NOTE

This instrument has an auto accompaniment feature that produces accompaniment
(rhythm + bass + chords) in the style you choose to match chords you play with your
left hand. You can select from 106 different styles covering a range of musical genres
and time signatures.

Select a Style Rhythm

Most Styles include a rhythm part. Let’s begin by listening to just the basic rhythm. The rhythm part is played
using percussion instruments only.

Press the [STYLE] button and then select the desired Style, referring to the section “Basic Operation” on page 12
for instructions.
Refer to the Style List on page 64.

• To adjust the tempo of the
Style, see page 35.

Press the [START/STOP] button to play back the Style rhythm.
Press the [START/STOP] button a second time when you want to stop playback.

• Since the Pianist category
Styles (098–106) have no
rhythm parts, no sound will
be produced if you start
rhythm-only playback.
To use these Styles, turn on
the auto accompaniment
and play the keyboard as
described on page 19 (The
bass and chord accompani­ment parts will sound.)

PSR-E333/YPT-330 Owner’s Manual

18

Play with a Style

NOTE

LoveSong

001

Appears when auto
accompaniment is on

NOTE

Split Point........default setting: 54 (F#2)

Auto

Accompaniment

range

Flashes when Sync Start is on.

NOTE

NOTE

Play Along with a Style

Here we’ll see how to add bass and chord accompaniment to the basic rhythm to produce a full, rich accompani­ment that you can play along with.

Press the [STYLE] button and select the desired Style.

1

For instructions on how to select a Style, see page 12.

Press the [ACMP ON/OFF] button to turn automatic accompani-

2

ment on.

Pressing this button a second time will turn automatic accompaniment off.

• You can also select commer­cially available Style Files.
To do this load the Style
Files from the computer to
the instrument, and then
register the style data start­ing with Style number 107
(page 46). If the Style File
has not been registered,
“No data” will be displayed
when selecting Style num­ber 107.

When auto accompaniment is on ...

The keys to the left of the Split Point (54; F#2) will play only chords. This is
known as the “Auto Accompaniment range.”

Press the [SYNC START] button to turn the Sync Start function on.

3

Start playing.

4

Style playback will begin as soon as you play a chord in the Auto Accompani­ment range of the keyboard. Try playing other chords with your left hand and
play a melody with your right hand.

Stop playing.

5

Playback will stop as soon as you press the [START/STOP] button.

You can also stop playing by pressing the [INTRO/ENDING/rit.] button so that
an appropriate ending pattern will play and then Style playback will stop (page

20).

36 48

018

LoveSong

001

• The Split Point setting can
be changed in the Function
settings (page 41 Function

005).

7260

• You can also press the
[START/STOP] button to
begin the rhythm of the
selected Style. The bass
and chords will begin play­ing as soon as you play a
key in the Auto Accompani­ment range of the keyboard.

• The Style Volume can be
adjusted in the Function set­tings (page 41 Function

001).

SHORTCUT
You can jump directly to the
Function settings by pressing
and holding the [STYLE] but­ton for longer than a second.

PSR-E333/YPT-330 Owner’s Manual

19

Play with a Style

Adding an Intro

Pressing the [INTRO/ENDING/rit.] button before playing back the
Style automatically adds a short introduction before starting the
actual (Main) rhythm.
When the intro finishes playing, Style playback shifts to the Main
Section.

Adding an Ending

Press the [INTRO/ENDING/rit.] button to begin playing an ending
Section. Playback will stop when the ending has played all the way
through.

If you press the [INTRO/ENDING/rit.] button a second time (while
the ending is playing) the ending will play ritardando (the tempo will
gradually get slower).

Switching Main Sections

There are two variations on the basic Section
(A and B).
This switches between the Main A and Main B
Sections, automatically playing a fill-in pattern
to smoothly lead into the next Section.
You can also select either the Main A or B
Section to start by pressing the [MAIN/AUTO
FILL] button before starting the Style.

Adding a Fill-in

A Fill-in pattern is automatically added before
changing to Section A or B.

Pattern Variation (Sections)

The instrument features a wide variety of Style “Sections” (patterns) that allow you to vary the
arrangement of the accompaniment to match the Song you are playing.

Recommended method for using Sections

 Setup

1. Press the [STYLE] button and then select a Style.

2. Press the [ACMP ON/OFF] button to turn auto accompaniment on.

3. Press the [INTRO/ENDING/rit.] button.

4. Press the [MAIN/AUTO FILL] button to select Main A or Main B.

5. Press the [SYNC START] button to turn Sync Start on.

You’re now ready to play the intro.

 Start playing

6. As soon as you play a chord with your left hand, the Intro of the selected Style starts.

7. Press the [MAIN/AUTO FILL] button. (Switching Main Sections/Adding a Fill-in)

 Ending

8. Press the [INTRO/ENDING/rit.] button. (Adding an Ending)

An appropriate ending Section will play and then Style playback will stop.

You can have the ending gradually slow down (ritardando) by pressing the [INTRO/ENDING/rit.] button again
while the ending is playing back.

PSR-E333/YPT-330 Owner’s Manual

20

Play with a Style

Cm

7

C

Dm

7

D

Em

7

E

Fm

7

F

Gm

7

G

GM

7

Am

7

A

B

Bm

BM

7

Cm

7

Chords

For users who are new to chords, this chart conveniently shows common chords for your reference. Since there are
many useful chords and many different ways to use them musically, refer to commercially available chord books
for further details. You can also look up chords using the Chord Dictionary function in this instrument (page 22).

 Indicates the root note.

Major Minor Seventh Minor Seventh Major Seventh

C

Cm

7

CM

7

D

E

C

F

G

A

B

7

• Inversions can be used as well as in “root” position—with the following exceptions: m7, m7b5, 6, m6, sus4, aug, dim7, 7b5, 6(9), sus2

• Inversion of the 7sus4 and m7(11) chords are not recognized if the notes are omitted.

• Sus2 chords are indicated by the root name only.

• If you play a chord which does not exist, the name of chord is not shown in the display, and the Style plays back only rhythm and bass.

Dm

Em

Fm

Gm

Am

Bm

7

7

7

7

7

7

DM

EM

FM

AM

7

7

7

7

Easy Chords

This method lets you easily play chords in the accompaniment range of the keyboard using only one, two, or three
fingers.

For root “C”

C

To play a major chord

Press the root note ()
of the chord.

Cm

To play a minor chord

Press the root note
together with the nearest
black key to the left of it.

C

7

To play a seventh chord

Press the root note
together with the nearest
white key to the left of it.

To play a minor seventh chord

Press the root note together with
the nearest white and black keys
to the left of it (three keys alto­gether).

PSR-E333/YPT-330 Owner’s Manual

21

Play with a Style

Hold for longer
than a second.

Dict.

001

Keys for chord type

dictionary

Keys for root

dictionary

The highest key

NOTE

Dict.

001

Notation of chord

Chord name (root and type)

Individual notes of chord
(keyboard)

Looking up Chords Using the Chord Dictionary

The Dictionary function is essentially a built-in “chord dictionary” that shows you the individual notes of chords.
This is convenient when you know the name of a certain chord and want to quickly learn how to play it.

Press and hold the [1 LISTENING 2 TIMING 3 WAITING] button

1

for longer than a second.

“Dict.” will appear in the display.

As an example, we’ll learn how to play a GM7 (G major seventh)

2

chord. Press the “G” key in the section of the keyboard labeled
“ROOT .” (The note doesn’t sound.)

The root note you set is shown in the display.

Press the “M7” (major seventh) key in the section of the keyboard

3

labeled “CHORD TYPE .” (The note doesn’t sound.)

The notes you should play for the specified chord (root note and chord type) are
shown in the display, both as notation and in the keyboard diagram.

To call up possible inversions of the chord, press the [+]/[-] buttons.

Try playing a chord in the auto accompaniment range (refer on

4

page 19) of the keyboard, checking the indications in the display.

When you’ve played the chord properly, a bell sound signals your success and
the chord name in the display flashes.

PSR-E333/YPT-330 Owner’s Manual

22

• Major chords are usually
indicated by the root name
only. For example, the indi­cation “C” in a score refers
to a “C Major” chord. To look
up the fingering for a major
chord press the root key and
then the M chord type key.

• These chords are not shown
in the Chord Dictionary func­tion: 6(9), M7(9), M7(

b

5, M7b5, M7aug, m7(11),

mM7(9), mM7

#

11 ),

b

5, 7b5, sus2

Try Playing a Song with a Style!

A

CD

7

D

E

G

A

CD

7

D

E

G

Standard Chords

Easy Chords

Let’s try out the Song “Aura Lee.” For information on how to play Styles using chords, see pages 19 and 20.
Try playing chords with your left hand and play a melody with your right hand.

Practice

Aura Lee

Recommended Style: 018 Love Song
Recommended Voice: 047 String Ensemble

Composer: G. Poulton

Play with a Style

PSR-E333/YPT-330 Owner’s Manual

23