Yamaha PSR-600, PSR-600E User Manual
DVD AUDIO/VIDEO SA-CD PLAYER
LECTEUR DE DVD AUDIO/VIDEO SA-CD
DVD-S657
OWNER’S MANUAL
MODE D’EMPLOI
UA
IMPORTANT SAFETY INSTRUCTIONS
12
Grounding or Polarization — This product may be equipped
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
• Explanation of Graphical Symbols
1
Read Instructions — All the safety and operating
instructions should be read before the product is operated.
2
Retain Instructions — The safety and operating instructions
should be retained for future reference.
3
Heed Warnings — All warnings on the product and in the
operating instructions should be adhered to.
4
Follow Instructions — All operating and use instructions
should be followed.
5
Cleaning — Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
6
Attachments — Do not use attachments not recommended
by the product manufacturer as they may cause hazards.
7
Water and Moisture — Do not use this product near water
— for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool;
and the like.
8
Accessories — Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may fall, causing
serious injury to a child or adult, and serious damage to the
product. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the product
Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.
9
A product and cart combination should be
moved with care. Quick stops, excessive
force, and uneven surfaces may cause the
product and cart combination to overturn.
10
Ventilation — Slots and openings in the
cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it
from overheating, and these openings must not be blocked
or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
11
Power Sources — This product should be operated only
from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your
home, consult your product dealer or local power company.
For products intended to operate from battery power, or other sources, refer to the operating instructions.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to alert
you to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert you to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying
the appliance.
with a polarized alternating current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
13
Power-Cord Protection — Power-supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
14
Lightning — For added protection for this product during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
15
Power Lines — An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power
lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
16
Overloading — Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can result
in a risk of fire or electric shock.
17
Object and Liquid Entry — Never push objects of any kind
into this product through openings as they may touch dangerous voltage points or short-out parts that could result in
a fire or electric shock. Never spill liquid of any kind on the
product.
18
Servicing — Do not attempt to service this product yourself
as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified
service personnel.
19
Damage Requiring Service — Unplug this product from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the
product,
c) If the product has been exposed to rain or water,
d)
If the product does not operate normally by following
.
the operating instructions. Adjust only those controls
that are covered by the operating instructions as an im-
proper adjustment of other controls may result in dam-
age and will often require extensive work by a qualified
technician to restore the product to its normal operation,
e) If the product has been dropped or damaged in any
way, and
f) When the product exhibits a distinct change in perfor-
mance - this indicates a need for service.
20
Replacement Parts — When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
21
Safety Check — Upon completion of any service or repairs
to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating
condition.
22
Wall or Ceiling Mounting — The unit should be mounted to
a wall or ceiling only as recommended by the manufacturer.
23
Heat — The product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
i
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications
not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void
your FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class
“B” digital devices.
Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential
environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio
frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference
harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference
will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning
the product “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change
the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this
type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., 6660 Orangethorpe
Ave. Buena Park, CA90622.
The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying
blaring or distortion - and, most importantly, without affecting your sensitive hearing.
Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic
Industries Association's Consumer Electronics Group recommend you to avoid prolonged exposure from excessive
volume levels.
For Customer Use:
Read carefully the information located at the bottom of the
player (U.S.A. model) and enter below the Serial No. Retain
this information for future reference.
FCC INFORMATION (for US customers)
INVISIBLE LASER RADIATION WHEN OPEN
CAUTION:
DO NOT STARE INTO BEAM
INVISIBLE LASER RADIATION WHEN OPEN
DANGER:
AVOID DIRECT EXPOSURE TO THE BEAM
Model No.
Serial No. __________________________
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to wide
slot and fully insert.
This Class B digital apparatus complies with Canadian
ICES-003.
This digital apparatus does not exceed the Class B limits for
radio noise emissions from digital apparatus as set out in the
Radio Interference Regulations of the Canadian Department
of Communications.
POUR LES CONSOMMATEURS CANADIENS
Pour éviter les chocs électriques, introduire la lame la plus
large de la fiche dans la borne correspondante de la prise et
pousser jusqu’au fond.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
ii
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1
To assure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
2
Install this sound system in a well ventilated, cool,
dry, clean place — away from direct sunlight, heat
sources, vibration, dust, moisture, or cold. In a
cabinet, allow about 2.5cm (1 inch) of free space
all around this unit for adequate ventilation.
3
Locate this unit away from other electrical
appliances, motors, or transformers to avoid
humming sounds.
4
Do not expose this unit to sudden temperature
changes from cold to hot, nor locate this unit in
an environment with high humidity (i.e., a room
with a humidifier) to prevent condensation inside
this unit, which may cause an electrical shock, fire,
damage to this unit, and/or personal injury.
5
Avoid installing this unit in a location where
foreign objects may fall onto this unit or where
this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do not place:
– Other components, as they may cause damage
and/or discoloration on the surface of this unit.
– Burning objects (i.e., candles), as they may
cause fire, damage to this unit, and/or personal
injury.
– Containers with liquid in them, as they may fall,
spilling the liquid and causing an electrical
shock to the user and/or damage to this unit.
6
Do not cover this unit with a newspaper,
tablecloth, curtain, etc. in order not to obstruct
heat radiation. If the temperature inside this unit
rises, it may cause fire, damage to this unit, and/or
personal injury.
7
Do not plug in this unit to a wall outlet until all
connections are complete.
8
Do not operate this unit upside-down. It may
overheat, possibly causing damage.
9
Do not use excessive force on switches, knobs
and/or cords.
10
When disconnecting the power cord from the
wall outlet, grasp the plug; do not pull the cord.
11
Do not clean this unit with chemical solvents; this
might damage the finish. Use a clean, dry cloth.
12
Use only the voltage specified on this unit. Using
this unit with a higher voltage than specified is
dangerous and may cause fire, damage to this
unit, and/or personal injury. YAMAHA will not be
held responsible for any damage resulting from
use of this unit with a voltage other than as
specified.
13
To prevent damage by lightning, disconnect the
power cord from the wall outlet during an
electrical storm.
14
Do not attempt to modify or fix this unit. Contact
qualified YAMAHA service personnel when any
service is needed. The cabinet should never be
opened for any reason.
15
When not planning to use this unit for long
periods of time (i.e., vacation), disconnect the AC
power plug from the wall outlet.
16
Be sure to read the “Troubleshooting” section on
common operating errors before concluding that
this unit is faulty.
17
Before moving this unit, press STANDBY/ON to
set the unit in standby mode, then disconnect the
AC power plug from the wall outlet.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE.
When playing DTS encoded CDs, excessive noise will be
heard from the analog stereo outputs. To avoid possible
damage to the audio system, the consumer should take
proper precautions when the analog stereo outputs of
the player are connected to an amplification system. To
enjoy DTS Digital Surround™ playback, an external 5.1channel DTS Digital Surround™ decoder system must
be connected to the digital output of the player
LASER SAFETY
This unit employs a laser. Due to possible eye injury,
only a qualified service person should remove the
cover or attempt to service this device.
CAUTION
VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN. AVOID EXPOSURE TO BEAM.
(WARNING LOCATION: INSIDE ON LASER
COVERSHIELD OR THE BACKPLATE OF SET)
LASER
Type Semiconductor laser GaAlAs
Wave length 650 nm (DVD)
780 nm (VCD/CD)
Output Power 7 mW (DVD)
10 mW (VCD/CD)
Beam divergence 60 degree
DANGER
This unit emits visible laser radiation when open.
Avoid direct eye exposure to beam.
When this unit is plugged into a wall outlet, do not
place your eyes close to the opening of the disc tray
and other openings or look inside.
.
iii
Contents
Introduction
Region Codes..............................................................3
Supplied accessories..................................................3
Notes about discs ......................................................3
Cleaning discs..............................................................3
Patent information.....................................................3
Functional Overview
Front Panel ..................................................................4
Rear Panel....................................................................5
Remote Control.........................................................6
Preparation
General Notes on connections ..............................7
Digital Connections...................................................7
Analog Connections..................................................8
6ch discrete jacks..................................................................8
MIXED 2CH jacks................................................................8
Video Connections....................................................9
S-Video terminal <A>.......................................................9
Composite Video terminal <B>..................................9
Component Video terminal <C> ..............................9
Getting Started
Inserting batteries into the Remote Control ... 10
Using the remote control.............................................10
Turning on the power............................................ 10
Selecting the color system that corresponds to
your TV ..................................................................... 10
Setting language preference.................................. 11
Setting the OSD Language...........................................11
Setting the Audio, Subtitle and Disc menu
language...................................................................................12
Setting Speaker Channels......................................12
Disc Operations
Basic Playback........................................................... 14
General Operation..................................................14
Pausing playback.................................................................14
Selecting track/chapter ...................................................14
Searching backward/forward.......................................14
Stopping playback..............................................................14
Selecting various repeat/shuffle functions.......... 15
Repeat......................................................................................15
Repeating a section within a chapter/track.........15
Shuffle.......................................................................................15
Operations for video playback (DVD/VCD/SVCD) .... 15
Using the Disc Menu.......................................................15
Zooming in............................................................................16
Resuming playback from the last stopped
point..........................................................................................16
On-Screen Display (OSD)...........................................16
Special DVD Features ............................................17
Playing a Title.......................................................................17
Camera Angle......................................................................17
Audio........................................................................................ 17
Subtitles................................................................................... 17
Special VCD & SVCD Features............................ 18
Playback Control (PBC).................................................18
Preview Function ...............................................................18
DVD-Audio Features..............................................19
Changing pages...................................................................19
Playing bonus groups.......................................................19
DVD-Video mode ............................................................19
SA-CD (Super Audio CD) .................................... 20
Playing a disc.........................................................................20
Changing the SA-CD playback area and layer..... 20
Playing MP3/DivX/JPEG/Kodak Picture CD......... 21
General Operation...........................................................21
Selecting a folder and track/file..................................21
Repeat......................................................................................21
Special picture disc features..................................22
Preview Function (JPEG)...............................................22
Zoom picture.......................................................................22
Playback with multi-angles............................................22
Scan Effect..............................................................................22
Playing MP3 music and JPEG picture
simultaneously .....................................................................22
English
1
Contents
Setup Menu
General Setup Menu............................................... 23
Selecting DVD-Audio/Video mode........................23
Locking/Unlocking the disc for viewing.................23
Dimming player’s front panel display .....................23
Programming disc tracks (not for Picture
CD/MP3)................................................................................24
OSD Language....................................................................24
Screen Saver.........................................................................24
Sleep Timer...........................................................................25
DivX® VOD registration code..................................25
Audio Setup Menu .................................................. 25
Setting the analog output..............................................25
Setting the Digital output..............................................26
Speaker Setup......................................................................26
CD Upsampling..................................................................26
Night Mode...........................................................................27
Video Setup Menu................................................... 27
TV Type..................................................................................27
Setting the TV Display....................................................27
Progressive ............................................................................28
Picture Setting......................................................................28
Selecting the black level (U.S.A. model only).... 29
Closed Caption (U.S.A. model only)......................29
Preference Setup Menu ......................................... 30
Audio, Subtitle, Disc Menu ..........................................30
Restricting playback by Parental Control.............30
PBC (Playback Control).................................................30
MP3/JPEG Menu.................................................................31
Playback of VR Format...................................................31
Changing the Password..................................................32
Restoring to original settings.......................................32
Language Codes....................33
Troubleshooting....................35
Glossary .................................37
Specifications.........................39
2
Introduction
Thank you for purchasing this unit. This
Owner’s Manual explains the basic
operation of this unit.
Region Codes
DVD discs must be labeled for
ALL regions, Region 1 (U.S.A
model) or Region 4 (Australia
model) in order to play on this
Player. You cannot play Discs
that are labeled for other
regions.
ALL
1
4
Supplied accessories
– Remote control
– Batteries (two AA size) for remote
control
– Audio pin cable
– Video pin cable
– Owner’s Manual
Notes about discs
– This unit is designed for use with DVD
video, Video CD, Super video CD,
DVD-Audio, Super Audio CD (SA-CD),
Audio CD, CD-R, CD-RW, DVD+RW,
DVD+R, DVD-R, DVD-RW and DVD-
RW (VR format).
This unit can play:
– MP3, picture (Kodak, JPEG) files on CD-
R(W).
– JPEG/ISO 9660 format
– Maximum 30 characters display.
®
– DivX
– Dual layer DVDs
– CD-R, CD-RW, DVD+R/RW, DVD-R/
– Some discs cannot be played depending
disc on CD-R[W]/DVD+R[W]/
DVD-R[W] (3.11, 4.x and 5.x)
RW and DVD-RW (VR format) cannot
be played unless finalized.
on the recording conditions such as PC
environment and application software.
The characteristics and condition of the
discs; materials, scratches, curvature,
etc., may result in failure.
– Be sure to use only CD-R and CD-RW
discs made by reliable manufacturers.
– Do not use any non standard shaped
discs (heart, etc.).
– Do not use disc with tape, stickers, or
paste on it. Doing so may damage the
unit.
– Do not use a disc which has been
printed on its surface by a commercially
available label printer.
Cleaning discs
• When a disc becomes dirty, clean it
with a cleaning cloth. Wipe the disc
from the center out. Do not wipe in a
circular motion.
• Do not use solvents such as benzine,
thinner, commercially available cleaners,
or antistatic spray intended for analog
records.
Patent information
Manufactured under license from
Dolby Laboratories.
“Dolby”, “Pro Logic”, and the
double-D symbol are trademarks
of Dolby Laboratories.
“DTS” and “DTS Digital
Surround” are registered
trademarks of Digital Theater
Systems, Inc.
DivX, DivX Certified, and
associated logos are trademarks
of DivXNetworks, Inc and are
used under license.
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and
other rights owners. Use of this copyright
protection technology must be authorized by
Macrovision Corporation, and is intended for home
and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
English
3
Functional Overview
Front Panel
STANDBY/ON
– turns on this unit or sets it to the
standby mode
9 STOP
– stops playback
; PAUSE
– pauses playback
Disc tray
DVD-AUDIO indicator
– lights up when the player detects
DVD-Audio signals
SA-CD indicator
– lights up when the player detects
SA-CD signals
PROGRESSIVE indicator
– lights up when the unit enters
Progressive mode
/ OPEN/CLOSE
– opens or closes the disc tray
B PLAY
– starts playback
Front panel display
– shows information about the
operational status of the unit
A.DRCT
– lights up when you enter the
AUDIO DIRECT mode by pressing
the AUDIO DIRECT button on the
remote control during audio disc
playback
ML.CH
– lights up when you play multi-
channel audio source
D.MIX
– lights up when you play the discs
that allow down mixing of the multi-
channel audio sources
A.DRCT ML.CH D.MIX
4
Functional Overview
Rear Panel
AC Power Cord
– connects to a standard AC outlet
COAXIAL digital audio output
– connects to a digital (coaxial) input of
your AV receiver or stereo system
S VIDEO output
– connects to an S-Video input on your
AV receiver
COMPONENT video outputs
– connect to an AV receiver with Y
B/CB PR/CR inputs
P
VIDEO output
(composite video out)
– connects to a video input on your
AV receiver
MIXED 2CH output
– connect to the audio jacks on
your AV receiver or stereo
system
English
OPTICAL digital audio output
– connects to a digital (optical) input on
your AV receiver or stereo system
– connect to the 6ch input jacks
6ch discrete output
on your AV receiver
Caution: Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
5
Functional Overview
V
Remote Control
– switches video output on and
off during audio disc playback
– use to select from 3 different
– selects a sound mode: Stereo,
irtual Surround or Multi-channel
– displays the top-level disc
– moves back to the previous
– accesses the disc’s menu
– (left/right/up/down) selects an
item in the currently displayed
– moves to the previous chapter
– pauses playback temporarily
AUDIO DIRECT
– turns the pages of
DVD-Audio still pictures
brightness levels
for the display
SOUND MODE
– changes the SA-CD
playback area
TOP MENU/RETURN
menu (DVD)
menu (VCD)
(for DVDs)
– switches PBC on/off
(for VCDs)
ENTER/OK
– acknowledges the menu
– searches backward*
STOP ( 9 )
– stops playback
PLAY ( B )
– starts playback
PAUSE ( ; )
– frame-by-frame playback
PAGE
DIMMER
MENU
1 2 3 4
menu
selection
S
or track
|
B/
– turns on this player or sets it
to the standby mode
numeric buttons
– selects numbered items in the
currently displayed menu
ON SCREEN
– accesses or clears the player’s
On Screen Display menu
SETUP
– accesses or clears the player’s
setup menu
T
– searches forward*
– moves to the next chapter or
track
SUBTITLE
– selects the language for
subtitles
ANGLE
– selects the DVD camera angle
ZOOM
– enlarges the video image
AUDIO
– selects the audio language or
format selector
– changes the Hybrid SA-CD
playback layer
REPEAT
– repeats the chapter, track,
title ordisc
A-B
– repeats a specific segment
SHUFFLE
– plays tracks in random order
SCAN
– plays the first 6 seconds or
less of each track/chapter on
the disc
* Press and hold button for about two seconds.
6
Preparation
General Notes on connections
Never make or change connections with
the power switched on.
• Depending on the equipment you wish
to connect, there are various ways you
could connect this unit. Possible
connections are shown in the following
drawings.
• Please refer to the manuals of other
equipment as necessary to make the
best connections.
• Do not connect this unit via your VCR.
The video quality could be distorted by
the copy protection system.
• Do not connect this unit’s audio out
jack to the phono in jack of your audio
system.
Digital Connections
This unit has COAXIAL and OPTICAL
digital out jacks. Connect one or both of
them to your AV receiver equipped with
Dolby digital, DTS, or MPEG decoder
using a commercially available cable.
Note:
– If the audio format of the digital output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all. Make
sure to select the appropriate audio format
at menu screen included on the disc.
Pressing AUDIO once or more may change
not only audio languages but also audio
formats, and the selected format appears
for several seconds on the status window.
– SA-CD audio signals are not output from
the DIGITAL OUT jacks.
– If you wish to enjoy Dolby Digital, DTS, and
MPEG format, you must connect this player
to an AV receiver that supports these
formats.
English
C
O
Left front
speaker
back speaker
AV receiver
Surround
Center
speaker
Right front
speaker
Right surround
Subwoofer
speaker
COAXIALINOPTICAL
IN
Left surround
speaker
You will need to set this unit’s digital
output to ALL (see page 26
“DIGITAL OUTPUT”).
7
Preparation
Analog Connections
This player has two types of analog output
jacks.
6ch discrete jacks
To reproduce multi-channel Super Audio
CD and DVD-Audio, connect these jacks
to your AV receiver’s multi channel input
jacks using commercially available audio
pin cables.
Left front
speaker
FRONT
R L
AV receiver
Center
speaker
CENTER
Right front
SUBWOOFER
speaker
SURROUND
RL
Subwoofer
MIXED 2CH jacks
Use the audio/video cable supplied with
this player to connect the L (left) and R
(right) jacks to the corresponding input
jacks of your audio component, such as a
stereo amplifier. You can connect a
subwoofer to the SUBWOOFER jack.
L
R
amplifier
Left
speaker
Stereo
Right
speaker
R
1 CD/DVD
RL
L
Subwoofer
Left surround
speaker
8
Surround
back speaker
Right surround
speaker
Preparation
Video Connections
If your AV receiver has video output jacks,
connect your receiver (and then to your
TV) so that you can use one TV for several
different video sources (LD, VCR, etc.) by
simply switching the input source selector
of your receiver.
The player has three types of video output
jacks. Use one of them in accordance with
the input jacks of the equipment to be
connected.
Video pin
cable
S VIDEO
INPUT
VIDEO
OUT
VIDEO
S
IN
V
VIDEO
AV receiver
COMPONENT
VIDEO OUT
COMPONENT
VIDEO IN
YPBCB PRCR
COMPONENT
VIDEO IN
S VIDEO
OUT
S VIDEO
IN
<C><A> <B>
S-Video terminal <A>
S (separate) video connection achieves a
clearer picture than composite video
connection by separating color and
luminance when transmitting signals. Use
commercially available S-video cable.
Receiver (and TV) with S-video input is
required.
Composite Video terminal <B>
Use the supplied video pin cable when
connecting the player to an AV receiver.
Component Video terminal <C>
Component video connection achieves
high fidelity in reproducing colors (better
performance than S-video connection),
separating video signal into luminance (Y,
terminal color-coded as green), and color
difference (Pb, blue/Pr, red). Use
commercially available coaxial cables.
Receiver (and TV) with component input is
required. Observe the color of each jack
when connecting. If your receiver does not
have component output jacks, connecting
the player’s component output directly to
your TV’s component input can reproduce
better video image.
English
9
Getting Started
Step1: Inserting batteries into the Remote Control
3
1
2
2
1
Open the battery compartment.
2
Insert the supplied two batteries type R06
or AA, following the indications (+ –)
inside the compartment.
3
Close the cover.
Using the remote control
Remote control
sensor
Point the remote control
at the sensor, within
approximately 6 m
(20 feet) of the unit.
30
30°
°
Step2: Turning on the power
1
Connect the AC power cord to the power
outlet.
2
Turn on the TV and your AV receiver.
3
Select the appropriate input source at the
AV receiver that was used to connect to
this unit. Refer to the equipment owner’s
manual for details.
4
Turn this unit on.
5
Set the TV to the correct Video IN channel
(eg. EXT1, EXT2, AV1, AV2, AUDIO/
VIDEO, etc. Refer to your TV owner’s
manual for details).
➜
The front display lights up and the
default screen appears on the TV.
Step3: Selecting the color system that corresponds to your TV
This DVD Player is compatible with both
NTSC and PAL. Select the color system
that matches your TV.
VIDEO SETUP PAGE
TV TYPE PAL
TV DISPLAY NTSC
PROGRESSIVE MULTI
PICTURE SETTING
BLACK LEVEL
CLOSED CAPTION
Handling the remote control
• Do not spill water or other liquids on
the remote control.
• Do not drop the remote control.
• Do not leave or store the remote
control in the following types of
conditions:
– high humidity such as near a bath
– high temperature such as near a heater
or stove
– extremely low temperature
– dusty places
10
1
Press
SETUP
2
Press 2 repeatedly to select [VIDEO
.
SETUP PAGE].
3
Press 34 to highlight [TV TYPE], then
press 2.
Loading...