®
Front Loading Washer
PRODUCT MODEL NUMBERS |
|
OVERALL DIMENSIONS |
WFC7500V
Electrical: 120-volt, 60 Hz, AC-only,
15or 20-amp, fused electrical supply. A timedelay fuse or circuit breaker and separate circuit is recommended.
36.2" |
23.4" |
|
(59.5 cm) |
||
(92 cm) |
||
|
32.9" (83.5 cm)
20.1"
(51cm)
RECOMMENDED INSTALLATION SPACING FOR RECESSED OR |
|
RECOMMENDED INSTALLATION |
CLOSET INSTALLATIONS, WITH OR WITHOUT A PEDESTAL |
|
SPACING FOR CABINET INSTALLATION |
|
|
|
Dimensions shown are the recommended spacing.
For cabinet installation, with a door, the minimum ventilation openings in the top are required.
Washer on Pedestal
|
|
|
|
3" |
|
|
|
|
|
|
(7.6 cm) |
|
|
|
|
34" |
48 in.2 |
|
|
|
|
|
(310 cm2) |
|
|
|
|
|
|
(86.4 cm) |
|
|
|
|
|
|
|
24 in.2 |
3" |
|
|
|
|
|
(155 cm2) |
|
|
|
|
|
|
|
(7.6 cm) |
|
|
1" |
20.1" |
4" |
|
1" |
23.4" |
1" |
(2.5 cm) |
(51.0 cm) |
(10.2 cm) |
|
(2.5 cm) |
(59.5 cm) |
(2.5 cm) |
|
A |
|
|
B |
A |
|
|
|
|
|
|
|
|
|
7" (17.8 cm) |
7" (17.8 cm) |
|
|
18" min. |
|
|
|
(45.7 cm) |
|
|
|
|
9" |
|
|
|
(22.9 cm) |
1" |
20.1" |
4" |
|
(2.5 cm) |
(51.0 cm) |
(10.2 cm) |
|
|
B |
|
|
A. Side view - closet or confined area |
A. Recessed area |
4" |
20.7" |
1" |
1" |
23.4" |
1" |
B. Closet door with vents |
(10.2 cm) (52.5 cm) (2.5 cm) |
(2.5 cm) (59.5 cm) (2.5 cm) |
|||||
B. Side view - closet or confined area |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RECOMMENDED INSTALLATION SPACING FOR CUSTOM UNDERCOUNTER INSTALLATION
Dimensions shown are the recommended spacing.
2" (5 cm) |
|
|
32.9" min. |
|
|
(83.5 cm) |
|
|
1" |
23.4" |
1" |
(2.5 cm) |
(59.5 cm) |
(2.5 cm) |
DRAIN SYSTEM OPTIONS
RECOMMENDED INSTALLATION SPACING FOR RECESSED OR CLOSET INSTALLATION, WITH STACKED WASHER AND DRYER
Dimensions shown are the recommended spacing.
48 in.2 * |
|
12" (30.5 cm) |
|
|
|
(310 cm2) |
|
|
|
|
|
|
3" (7.6 cm) |
|
|
|
*Min. top and |
|
|
|
|
|
bottom air |
|
|
|
|
|
openings for |
|
|
|
|
|
closet door. |
|
|
|
|
|
**External exhaust |
|
|
|
|
|
elbow requires |
|
|
|
|
|
additional space. |
|
|
|
|
|
† Wall, door and floor |
|
3" (7.6 cm) |
|
|
|
molding may |
|
|
|
|
require additional |
|
|
|
|
|
|
|
24 in.2 * |
1" (2.5 cm) |
1" † |
23.4" |
1" † |
spacing. |
(155 cm2) |
|
(2.5 cm) |
(59.5 cm) |
(2.5 cm) |
|
Standpipe drain system - wall or floor (view A & B)
The standpipe drain requires a minimum diameter standpipe of 2" (5 cm). The minimum carry-away capacity can be no less than 17 gal. (64 L) per minute.
The top of the standpipe must be at least
30" (76.2 cm) high and no higher than 96" (2.4 m) from the bottom of the washer.
30" min. (76.2 cm)
Laundry tub drain system (view A) |
Floor drain system (view B) |
The laundry tub needs a minimum |
The floor drain system requires a siphon break |
20 gal. (76 L) capacity. The top of |
that may be purchased separately. |
the laundry tub must be at least |
The siphon break must be a minimum of 28" |
30" (76.2 cm) above the floor. |
(71 cm) from the bottom of the washer. |
|
Additional hoses might be needed. |
|
26" min. |
30" min. |
(66 cm) |
|
|
(76.2 cm) |
|
A B C D
Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation |
Ref. W10175588 |
Instructions packed with product. Specifications subject to change without notice. |
3-31-08 |
Loading...