Welltech Computer Co., Ltd.
CONTENTS
Chapter1 Boarder Gateway 5800 Introduction..................- 3 -
Boarder Gateway 5800 Features.....................................- 3 -
Boarder Gateway 5800 Appearance Description.............- 4 -
Chapter 2 Boarder Gateway 5800 Quick Start...................- 6 -
Logon Boarder Gateway 5800.........................................- 7 -
Network ...........................................................................- 8 -
System Time..................................................................- 10 -
Apply change.................................................................- 12 -
Chapter 3 Configuration Reference..................................- 13 -
System Configuration ....................................................- 13 -
Debug Configuration......................................................- 17 -
NAT Group.....................................................................- 17 -
ACL................................................................................- 18 -
IP ACL .....................................................................- 18 -
ANI ACL...................................................................- 19 -
AAA ...............................................................................- 19 -
Account Manager...........................................................- 20 -
Chapter 4 System Control Reference...............................- 22 -
Upgrade.........................................................................- 22 -
Relogin ..........................................................................- 22 -
Chapter 5 System monitor Reference..............................- 24 -
Server Status .................................................................- 24 -
Event Log ......................................................................- 24 -
Debug Info .....................................................................- 27 -
Ping ...............................................................................- 27 -
Chapter 6 Telnet & RS-232 Configuration........................- 29 -
Chapter 7 LCD Display Configuration..............................- 37 -
Appendix 1 Time zone to Country Mapping List.............- 40 -
Quick Function Reference ................................................- 43 -
Index ...................................................................................- 46 -
Boarder Gateway 5800 - 2 -
Welltech Computer Co., Ltd.
Chapter1 Boarder Gateway 5800 Introduction
Boarder Gateway 5800 provides a cost-effective means to
deploy IP communication services (voice and video) based on a
highly adaptive architecture. It is a VOIP-aware network device
that processes, measures, and manipulates VOIP packets. It
offers auto NAT detect and transversal, shares the RTP
Resource between Soft -Switch and greatly decreased the
loading.
Boarder Gateway 5800 Features
Free NAT Connections from SIP Proxy or Soft switch
Easy Plug and Play without Pre-setting Subscriber
Auto NAT Detect and Transversal
Audio/Video RTP Proxy handling
Authentication Cryptography Bypass
Black List/White List of ANI
Black List/White List of IP
Accept Soft-Switch Calls Only
Call Protection for non-Registered User
Register Protection for Authentication Failed User
Intelligent RTP Resource Management between SIPBG 5800
Global NAT Group/IP Definition
Call Keep Live Validation
Provides Call Detail Record
Real Time RADIUS Billing Message
RFC 3261 Comply
SIP UDP/URI Support
Call Transfer
Call Hold
Subscriber/Notify
INFO
System Capacity
− Max Concurrent Register: 5000
− Max Concurrent Calls: 500
− Max Concurrent RTP: 384
Boarder Gateway 5800 - 3 -
A
Architecture:
WellBG 5800 Applications
NATed
Private
Network
IAD
Welltech Computer Co., Ltd.
Class 5 Soft-Switch
VOIP
Core
WellBG 5800
WellBG 5800
NATed
Private
Network
Network
Private
Network
Enable NAT Users
Auto RTP proxy
Plug and Play
Soft-Switch Protection
Internet
IP
Private
Network
I
D
Soft-phone
IP
IP
Boarder Gateway 5800 Appearance Description
Boarder Gateway 5800 Front Panel:
1
2
3
5
4
Functions:
1: Power LED
2: Network1 Interface LED (not used)
3: Network2 Interface LED (not used)
6
8
7
Boarder Gateway 5800 - 4 -
Welltech Computer Co., Ltd.
4: H/D LCD
5: Power Switch
6: System Status LED
7: LCD Panel
8: LCD Touch Panel
Boarder Gateway 5800 Rear Panel:
1
3
5
2
4
Functions:
1: Electric Fan
2: AC Power outlet
3: AC Power switch
4: Keyboard/Mouse
5: Console port
6: SIP Service Ethernet port
7: Management Ethernet port
8: VGA
9: USB (not used)
9
8
6 7
Boarder Gateway 5800 - 5 -
Welltech Computer Co., Ltd.
Chapter 2 Boarder Gateway 5800 Quick Start
After connected Ethernet cables into the Boarder Gateway
5800 Service Interface, turned on the power. The first step is to
logon the system and set up the IP address.
Before you can use the browser to config Boarder Gateway
5800, you need to install Java Plug-in. Please confirm your JRE
version is 1.4.2(preferred & tested), if your PC has already
installed Java.
You also need to set newer versions of stored pages in
Internet Explorer to “Every visit to the page.” Click Tool > Internet
Option > General > Setting.
After success, restart your browser to take effect.
Boarder Gateway 5800 - 6 -
Welltech Computer Co., Ltd.
Logon Boarder Gateway 5800
Step1: Start IE6.0 (or later version) to navigate Boarder Gateway
5800 web management system by typing the default URL
is http://192.168.111.161:10087. The screen will display
User ID and Password as figure 2.1-1.
Figure 2.1-1
☺Note: The default network IP address is:
Service Interface: 192.168.111.161/ 255.255.0.0/ 192.168.111.254
Management Interface: 192.168.111.151/ 255.255.0.0
Make sure your PC had same network IP address setting (e.g.
192.168.111.33/255.255.255.0) Otherwise, you will unable to connect to
Boarder Gateway 5800.
Step 2: Enter login user name and password (the default user id
is root and user password is root). You can manage your
user account via web (refer to section “Account
Manager”) later.
Figure 2.1-2
Step 3: The screen shows the Home Page of Boarder gateway
5800 as Figure 2.1-3.
Boarder Gateway 5800 - 7 -
Welltech Computer Co., Ltd.
Figure 2.1-3
Network
Boarder gateway 5800 has 2 network interfaces:
− Boarder gateway service interface: provide service over
this network. If you have DNS record, also you must be
setup DNS server to effect.
− Management interface: it is used for management
purpose.
Step 1: After successfully logon to the system, we need to
change the network configuration. Click Control > Network to
setup the Service Interface parameters as figure 2.2-1.
Figure 2.2-1
Step 2: Enter the deserved IP address, submask and default
gateway or selected to “Use DHCP”. Apply the change by
clicking Apply button as figure 2.2-2.
Boarder Gateway 5800 - 8 -
Welltech Computer Co., Ltd.
Figure 2.2-2
Step 3: When screen shows “Change network configuration
may cause server disconnected, are you sure?” click
on OK button to changes IP address as figure 2.2-3.
Figure 2.2-3
Step 4: When screen shows “After configuration changed,
please re-login system with new IP address and
execute Soft-Reset!” click OK button as figure 2.2-4.
Figure 2.2-4
Step 5: Follow Step 1 to 4 to change management interface
network configuration as figure 2.2-5.
Boarder Gateway 5800 - 9 -
Welltech Computer Co., Ltd.
Figure 2.2-5
☺Note: Network control takes around 5-second to apply the new
network configuration. Please logon again with new IP
address after 5 seconds.
System Time
Step 1: When relogon to the new IP address; the next is to setup
the system time zone. Click Control > System Time to
setup the system. Enter current date and time. Apply the
change by clicking Apply button as figure 2.3-1.
Figure 2.3-1
Step 2: Time zone Setting
Standard: Select the Standard option to setup the
system-predefined time zone as figure 2.3-2
Figure 2.3-2
Parameter:
Boarder Gateway 5800 - 10 -
Welltech Computer Co., Ltd.
Time Zone:
− Standard: Use a predefined standard time zone (Refer to
section “Time zone to Country Mapping List”)
− Customize: Use a user defined time zone
Auto Daylight Saving: Auto adjust daylight saving time or not
User defined time zone: Select the customized option and
enter the time zone bias to set a user-defined time zone as figure
2.3-3
Figure 2.3-3
Parameter:
Daylight Bias: The offset added to the Bias when the time
zone is in daylight saving time
Daylight Start: The date that a time zone enters daylight time
− Month: 01 to 12
− Week Day: Sunday to Saturday
− Apply Week (Day:01 to 05, Specifies the occurrence of
day in the month; 01 = First occurrence of day, 02 =
Second occurrence of day, ...and 05 = Last occurrence of
day)
− Hour: 00 to 23
Standard Start: The date that a time zone enters daylight time
− Month: 01 to 12
− Week Day: Sunday to Saturday
− Apply Week (Day:01 to 05, Specifies the occurrence of
day in the month; 01 = First occurrence of day, 02 =
Second occurrence of day, ...and 05 = Last occurrence of
day)
− Hour: 00 to 23
Step 3: If you would like to use SNTP to sync time with a SNTP
Boarder Gateway 5800 - 11 -
Welltech Computer Co., Ltd.
V4 Server, click Time Syn c button to setup it as figure
2.3-4.
Figure 2.3-4
Step 4: After successfully base setup; click Control > System to
restart Boarder Gateway 5800 to take effect as figure
2.3-5.
Figure 2.3-5
Apply change
Start Path: Config > Appl y Change
When you loaded a new working configuration or changed any
configuration, you need click “Apply Change” to take effect as
figure 2.4-1.
Figure 2.4-1
Boarder Gateway 5800 - 12 -
Welltech Computer Co., Ltd.
Chapter 3 Configuration Reference
System Configuration
Start Path: Configuration > System Configuration
Figure 3.1-1
Parameter Description:
SIP Domain: SIP domain for soft-switch or SIP proxy server. It
can be either the IP address of soft-switch or SIP domain.
Proxy Server: The Proxy Server or soft-switch IP address
which WellBG 5800 register to
Proxy Service Port: The Proxy Service UDP port number
Version: The version of Boarder Gateway 5800
Local UDP Port: The local UDP port on which the WellBG
5800 listened
IP ACL: IP ACL can be used to filter the caller based on IP
address.
− Black: Only on-list IP will be screened.
− White: Only on-list IP can get through.
ANI ACL: ANI ACL can be used to filter the caller based on
ANI number.
− Black: Only on-list ANI will be screened.
− White: Only on-list ANI can get through.
Min UAC NAT TTL: The minimum register time when a user is
sited behind NAT
Max UAC NAT TTL: The maximum register time when a user
Boarder Gateway 5800 - 13 -
Welltech Computer Co., Ltd.
is sited behind NAT
Enable System Log: Enable to send system information to
syslogD server or not
SysLogD Server IP 1, 2: SyslogD server IP address
Proxy Register TTL: The default registration maximum time to
live setting when register to the proxy
STMP Server: SMTP server host for system event notice
Email From: Email sender account
Email To: Email receiver
Subject: Email subject to be send to receiver. The following
variable parameters can be used to create dynamic subject
for system notice:
− $LOGLEVEL$: Information Level
− $HOSTNAME$: Host name
− $HOSTIP$: Host IP address
Click on the Advance button:
Figure 3.1-2
Advance Parameter Description:
Message Pool Page Size: Used to hold and process all
incoming and outgoing in the form of encoded message or
message objects. It is recommended that you configuration
the page size to the average message size your system is
expected to manage.
Message Pool Num of Pages: The pages number of
Message Pool
Boarder Gateway 5800 - 14 -
Welltech Computer Co., Ltd.
General Pool Page Size: Used by SIP Stack objects, such as
call-legs and transactions, to store the internal fields. For
example, the call-leg object will store the To, Form and
Call-ID headers and the local and remote contact addresses
on the general pool pages. The general pool is also used for
other activates that demand memory allocation.
General Pool Num of Pages: The pages number of General
Pool
Retransmission T1: T1 determines several timers as defined
in RFC3261. For example, when an unreliable transport
protocol is used, a Client Invite transaction retransmits
requests at an interval that start at T1 seconds and doubles
after every retransmission. A Client General transaction
retransmits requests at an interval that starts at T1 and
doubles until it reaches T2. (Default Value: 500ms) **
Retransmission T2: Determines the maximum retransmission
interval as defined in RFC3261. For example, when an
unreliable transport protocol is used, general requests are
retransmitted at an interval which starts at T1 and doubles
until reaches T2. If a provisional response is received,
retransmission continue but at an interval of T2. (Default
Value: 4000ms) **
Retransmission T4: T4 represents the amount of time the
network takes to clear message between client and server
transactions as defined in RFC3261. For example, when
working with an unreliable transport protocol, T4 determines
the time that UAS waits after receiving an ACK message and
before terminating the transaction. (Default Value: 5000) **
General Request Timeout Timer: After sending a General
request, the User Agent waits for a final response
generalRequestTimeoutTimer milliseconds before timeout
termination (in this time the User Agent retransmits the
request every T1, 2*T1,…T2,…milliseconds)**
Cancel General No Response Timer: When sending a
CANCEL request on a General transaction, the User Agent
waits cancelGeneralNoResponseTimer milliseconds before
timeout termination if there is no response for the cancelled
transaction(Default Value: 10000ms).**
Processing Queue Size: the maximum length of the
processing queue which holds events such as network
events.
Boarder Gateway 5800 - 15 -
Welltech Computer Co., Ltd.
Proxy 2xx Sent Timer: A successful server INVITE
transaction of a Proxy server includes only the INVITE
request and the 2xx response. (The ACK is not part of the
transaction).After sending the 2xx response the Proxy will
wait proxy2xxSentTimer before the transaction will terminate.
(default: 8000 ms)**
Proxy 2xx Rcvd Timer: A successful client INVITE transaction
of a Proxy server includes only the INVITE request and the
2xx response. (The ACK is not part of the transaction.)After
receiving the 2xx response, the Proxy will wait
proxy2xxRcvdTimer before the transaction terminates.
(default: 10000 ms)**
Use Rport Param In Via: Rport is short for Received Port
which is a parameter in Via Header.
Send Receive Buffer Size: The buffer size used by the SIP
Stack for receiving and sending SIP messages.
Max Transactions: The maximum transaction
Reject Unregister Call: Reject any unregister call or not
Enable Video RTP Proxy: Enable video RTP Proxy or not.
Enable video will great reduce the number of concurrent
channel and bandwidth.
Call Valid Check Timer: The timer to check periodically call is
valid or not.
Call Valid Check Method: Call Valid Check Method: ReInvite,
Update or disable
Call Valid Condition:
− Only terminate call on receiving response 481
− Terminate on any fail response
Authentication Failure Protect Timer: The Authentication
Failure protect timer
Proxy/RTP: Auto Use RTP Proxy or not
Register Guard Time: The Register Guard time
Advance System Configuration:
Start Path: Configuration > System > License
Figure 3.1-3
Boarder Gateway 5800 - 16 -
Welltech Computer Co., Ltd.
License Parameter Description:
Feature: System parameter
Serial No: System parameter
License Key: System parameter
☺Note: Please do not change it unless under Welltech’s instruction.
Debug Configuration
Debug can be turn on or off based on each system module
and level to minimum the debug information. Please only turn
on the debug information for debug purpose under Welltech
FAE's instruction and turn off when complete. Or the
system performance will be greatly hit.
Start Path: Configuration > Debug Configuration
Figure 3.2-1
NAT Group
WellBG 5800 will not use NAT Proxying when both subscribers
have same NAT group.
Start Path: Configuration > NAT Group
Figure 3.3-1
Boarder Gateway 5800 - 17 -
Welltech Computer Co., Ltd.
Parameter Description:
Group ID: Group ID
Description: Group description
Click on the Detail button:
Figure 3.3-2
Parameter Description:
IP Address: Public IP address on NAT
ACL
Access Control List can be used to filter the calls forms of IP
address and ANI.
Start Path: Configuration > ACL
IP ACL
Start Path: Configuration > ACL > IP ACL
Figure 4.1-1
Parameter Description:
IP Address: IP address used to be filtered
Boarder Gateway 5800 - 18 -
Welltech Computer Co., Ltd.
ANI ACL
Start Path: Configuration > ACL > ANI ACL
Figure 4.1-2
Parameter Description:
ANI: Calling party number used to be filtered
AAA
When WellBG 5800 to do the AAA (Authorization, Authentication
and Accounting), enter the correct parameter about Radius
setting.
Start Path: Configuration > AAA
Figure 5.1-1
Parameter Description:
Authorization IP: Radius Authentication Server IP address
Authorization Port: Radius Authentication Server Port
Boarder Gateway 5800 - 19 -
Welltech Computer Co., Ltd.
Accounting IP: Radius Account Server IP address
Accounting Port: Radius Account Server Port
Backup Authorization IP: Backup Radius Authentication
Server IP address
Backup Authorization Port: Back Radius Authentication
Server Port
Backup Accounting IP: Back Radius Account Server IP
address
Backup Accounting Port: Back Radius Account Server Port
Secret Key: The shared secret key with RADIUS Server
Max Retry: The maximum retry times
Response Timer (sec): The maximum wait for response time
from RADIUS Server
Authorization Retry Interval (sec): The internal to resend the
Authentication packet to RADIUS Server.
Accounting Retry Interval (sec): The internal to resend the
Account packet to RADIUS Server.
Switch Threshold: Switch to alternate RADIUS Server when
failures are occurred more than switch threshold.
Billing Message: Call detail record generating mode
− File Only: Log CDR into the file only. It can be retrieved by
ftp (directory d:\welltech\cdr)
− Radius Start/Stop: Log CDR into the file and send RADIUS
start/stop billing message out
− Radius Stop: Log CDR into the file and send RADIUS stop
billing message out
− None
CDR Keepdays: CDR system keeping days
CISCO Mode:
− Yes: Use Cisco RADIUS mode (have redundant string in
vender attribute)
− No: no
Send Zero Session Time:
− Yes: Send 0-balance session time for RADIUS when the
call failed
− No: no
Account Manager
You can manage (Modify, Add and Delete) the login user
Boarder Gateway 5800 - 20 -
Welltech Computer Co., Ltd.
account.
Start Path: Configuration > Account Manager
Figure 6.1-1
Field Description:
User ID: Login User ID
Password: Login Password
Boarder Gateway 5800 - 21 -
Welltech Computer Co., Ltd.
Chapter 4 System Control Reference
System, System Time, and Network Please refer to
Chapter 2 > System Time (Page 10) and Chapter 2 > Network
(Page 8)
Upgrade
Start Path: Control > Upgrade Control
Boarder Gateway 5800 provide upgrade new version at
remote side. You can upgrade it from Welltech technical support
web page by yourself.
Figure 4.1-1
Field Description:
File Name: Upload the software file name
Upload: Remote Upload the software at WellBG 5800
Relogin
Start Path: Control > Relogin
Click Control > Relogin to relogon by another user account as
figure 4.3-1.
Boarder Gateway 5800 - 22 -
Welltech Computer Co., Ltd.
Figure 4.2-1
Boarder Gateway 5800 - 23 -
Welltech Computer Co., Ltd.
Chapter 5 System monitor Reference
It provides a way to monitor the system status.
Server Status
Show current server status
Start Path: Monitor > Server Status
Figure 5.1-1
Parameter Description:
Application: System application
Version: Application version
Status: The application status
Max Call: The maximum call number
Used Call: The current used call number
Max Transaction: The maximum transaction number
Used Transaction: The current transaction number
Max Register: The maximum register number
Used Register: The current used register number
Max App Pool: The maximum application pool number
Used App Pool: The current used application pool number
Peak Used App Pool: The peak used application pool number
Event Log
Show system event log status.
Boarder Gateway 5800 - 24 -
Welltech Computer Co., Ltd.
Start Path: Monitor > Event Log
Figure 5.2-1
Field Description:
Date: Event created date
Time: Event created time
Event ID: Event ID
Type: Event Log type
− Information
− Warring
− Error
Source: Executable program
Description: The description of the event
☺Note: You can click Clear button to clear all event log.
See the detail event log:
Select the event and click detail to see the event detail.
Figure 5.2-2
Event Description:
Boarder Gateway 5800 - 25 -
Welltech Computer Co., Ltd.
Source Event ID Type Description
BorderGateway 8000 WARNING Failed to get RTP
Resource
BorderGateway 8001 EMERGENCY Failed to detect network
BorderGateway 8002 CRITICAL Outbound Proxy Setting
Error
BorderGateway 8003 EMERGENCY Failed to initiate SIP
BorderGateway 8004 EMERGENCY Failed to initiate watch dog
BorderGateway 8005 EMERGENCY Failed to create status
mutex
BorderGateway 8006 EMERGENCY Failed to create status
share memory
BorderGateway 9500 INFOMATION Application Started
BorderGateway 9501 INFOMATION System Shutting Down
BorderGateway 9502 INFOMATION Application Closed by
User
BorderGateway 9503 INFOMATION Apply Change
TelnetSvr 9500 INFOMATION TelnetSvr Started
NATProxy 9500 INFOMATION NATProxy Started
NATProxy 8000 WARNING SIP Proxy didn't set this rtp
proxy
NATProxy 9500 INFOMATION Register to Proxy Success
NATProxy 8001 INFOMATION Register to Proxy Fail
NATProxy 8000 WARNING SIP Proxy didn't set this
RTP Proxy
NATProxy 8002 WARNING Bind Socket Fail
(port=xxxxx)
AAAMgr 9500 INFOMATION AAAMgr start
AAAMgr 9501 INFOMATION On the fly change (system
change)
AAAMgr 8010 WARNING act:Auth server switch
from xxx.xxx.xxx.xxx to
xxx.xxx.xxx.xxx
AAAMgr 8010 WARNING act:Acct server switch
from xxx.xxx.xxx.xxx to
xxx.xxx.xxx.xxx
AAAMgr 8010 WARNING act:Authen server switch
from xxx.xxx.xxx.xxx to
xxx.xxx.xxx.xxx
Boarder Gateway 5800 - 26 -
Welltech Computer Co., Ltd.
Debug Info
Shows detail trace level messages.
Start Path: monitor > Debug Info
Figure 5.3-1
Filed Description:
Get Log: Get debug logs (-1~999). Zero indicates get log real
time.
Clear: Clear logs
Ping
You can use the “Ping” to check an IP is active or not.
Start Path: Monitor > Ping
Figure 5.4-1
Field Description:
Boarder Gateway 5800 - 27 -
Welltech Computer Co., Ltd.
Host IP Address: The IP address to ping
Boarder Gateway 5800 - 28 -
Welltech Computer Co., Ltd.
Chapter 6 Telnet & RS-232 Configuration
Boarder Gateway 5800 also can support to be managed by
Telnet or Console port (RS-232) for basic operations.
Interface：
Network ： TCP/IP Telnet (i.e. telnet 192.168.111.161
10086)
RS232:
- Connect using： COM1
- Baud Rate：9600
- Data bits：8
- Parity：None
- Stop bits：1
- Flow Control： None
- Wire： Null modem line (crossed)
Logon Boarder Gateway 5800 by Telnet
Use Windows build-in Hyper Terminal or other telnet
terminal emulator to login (e.g. telnet 192.168.67.1:10086). User
ID & password will be required for login (default login user id:
admin, password: admin & user id: root, password: root).
Command List:
Command Description
echo Auto echo on or off
eventlog Clean or show system log message
exit Quit the current session
ipconfig Configure or show network1,2 information
ping Check an IP address is available or not
reboot Reboot
reset Soft-reset
Boarder Gateway 5800 - 29 -
Welltech Computer Co., Ltd.
shutdown Shutdown
time Reset or show system time.
timezone Setup or show system timezone
useradmin Manage user account.
Help &? View command list
Echo: auto echo on or not
Command
Purpose
[root#]echo ? Usage: echo on/off
Example: echo on
[root#]echo on Echo is on
[root#]echo off Echo is off (default ralue)
Eventlog: show system log message
Command Purpose
[root#]eventlog ? Usage: eventlog [-clear]
Example: eventlog
eventlog -clear
[root#]eventlog
Show system eventlog:
Eventlog example:
Time: 2003-06-19 20:15:17
Event ID: 8700
Type:Warning
Source : wellgate5x00
Description: [0]: evt: TRUNK ALARM:
TrunkId=3
Time: 2003-06-19 20:15:17
Event ID: 8700
Type:Warning
Source : wellgate5x00
Description: [0]: evt: TRUNK ALARM:
TrunkId=2
Time: 2003-06-19 20:15:14
Event ID: 9501
Type: Information
Source : wellgate5x00
Description: [0]: evt: BOARD STARTED:
SLOT:8
Boarder Gateway 5800 - 30 -
Welltech Computer Co., Ltd.
Press any key to continue or press 'Q'
to quit
[root#]eventlog
Clear all event log
-clear
Exit: Quit the current session
Command Purpose
[root#]exit Quit the current session
Ipconfig: Configuration or show network information
Command Purpose
[root#] ipconfig ? Usage: ipconfig [-network
boardno][-delete dns] [-dhcp] [-dns
IPAddress1 IP
Address2 ] [-ip IPAddress -mask
Mask -gateway Gateway]
Example: ipconfig -network 1 -ip
192.168.67. 1 -mask 255.255.0.0
-gateway 192.168.5.254
example : ipconfig -network 1 -dhcp
example: ipconfig -network 1 –dns
192.168.1.1
example : ipconfig -network 1 -delete
dns
[root#]ipconfig
Show current network configuration
[Network 1] Local Area Connection
USE FIXED IP (or DHCP)
IP Address : 192.168.5.7
Subnet Mask : 255.255.0.0
DefaultGateway: 192.168.5.254
DNS Servers :
[Network 2] Local Area Connection2
USE FIXED IP
IP Address : 192.168.5.8
Subnet Mask : 255.255.0.0
Default Gateway :
DNS Servers :
[root#]ipconfig
Delete the DNS servers setting
Boarder Gateway 5800 - 31 -
Welltech Computer Co., Ltd.
network 1 –delete
dns
[Network 1] Local Area Connection
USE FIXED IP
IP Address :192.168.5.113
Subnet Mask : 255.255.0.0
Default Gateway : 192.168.1.254
DNS Servers :
[root#]ipconfig
network 1–dhcp
Enable DHCP
[Network 1] Local Area Connection
USE DHCP
IP Address : 192.168.5.10
Subnet Mask : 255.255.0.0
Default Gateway : 192.168.1.254
DNS Servers : 192.168.5.1
168.95.1.1
[root#]ipconfig
network 1–ip
61.220.126 28 –mask
255.255.0.224
–gateway
61.220.126.1
Use fixed network configuration
[Network 1] Local Area Connection
USE FIXED IP
IP Address : 61.220.126.28
Subnet Mask : 255.255.255.1
Default Gateway : 61.220.126.254
DNS Servers :
[root#]ipconfig
network 1–ip
61.220.126.115
Changes IP address only.
[Network 1] Local Area Connection
USE FIXED IP
IP Address : 61.220.126.115
Subnet Mask : 255.255.255.1
Default Gateway : 61.220.126.254
DNS Servers :
[root#]ipconfig
network 1–dns
210.59.126.53
Changes DNS configuration only.
[Network 1] Local Area Connection
USE FIXED IP
IP Address : 61.220.126.115
Subnet Mask : 255.255.255.1
Default Gateway : 61.220.126.254
DNS Servers : 210.59.126.53
Ping: Check an IP address is available or not
Command Purpose
[root#] ping ? Usage: ping IP.
Example: ping 127.0.0.1
[root#]ping
61.220.126.1
Ping result
Reply from 61.220.126.1 bytes=64
Boarder Gateway 5800 - 32 -
Welltech Computer Co., Ltd.
time=1ms TTL=29
Reply from 61.220.126.1 bytes=64
time=1ms TTL=29
Reply from 61.220.126.1 bytes=64
time=1ms TTL=29
Reply from 61.220.126.1 bytes=64
time=1ms TTL=29
Reboot:
Command Purpose
[root#] reboot ?
Reboot System
Are You Sure? (Y/N)
[root#]reboot
Are You Sure?(Y/N)y
WellBG 5800 are rebooting
Shutdown:
Command Purpose
[root#] shutdown ?
Shutdown System
Are You Sure? (Y/N)
[root#]shutdown
Are You Sure?(Y/N)y
WellBG 5800 are shutting down
Reset:
Command Purpose
[root#] reset ?
Soft reset System
Are You Sure? (Y/N)
[root#]reset
Are You Sure?(Y/N)y
Time: Reset or show system time
Command Purpose
[root#] time ? Usage : time YYYY-MM-DD
HH:NN:SS
Example : Time 2002-01-01 12:00:00
[root#]time
[root#]time
Show current time
The current time is 2003-06-20 15:17:30
Change system bios time
2003-07-29 23:14:53
Timezone: Setup or show system timezone
Command Purpose
Boarder Gateway 5800 - 33 -
[root#] timezone ?
Boarder Gateway 5800 - 34 -
Welltech Computer Co., Ltd.
Fixed Zone List:
01. Afghanistan Standard
Time
03. Arab Standard Time
05. Arabic Standard Time
07. AUS Central Standard
Time
09. Azores Standard Time
11. Cape Verde Standard
Time
13. Cen. Australia
Standard Time
15. Central Asia Standard
Time
17. Central European
Standard Time
19. Central Standard Time
21. Dateline Standard
Time
23. E. Australia Standard
Time
25. E. South America
Standard Time
27. Egypt Standard Time
29. Fiji Standard Time
31. GMT Standard Time
33. Greenwich Standard
Time
35. Hawaiian Standard
Time
37. Iran Standard Time
39. Korea Standard Time
41. Mexico Standard Time
2
43. Mountain Standard
Time
45. N. Central Asia
Standard Time
47. New Zealand
Standard Time
49. North Asia East
Standard Time
51. Pacific SA Standard
Time
53. Romance Standard
Time
55. SA Eastern Standard
Time
02. Alaskan
Standard
Time
04. Arabian
Standard
Time
06. Atlantic
Standard
Time
08. AUS
Eastern
Standard
Time
10. Canada
Central
Standard
Time
12. Caucasus
Standard
Time
14. Central
America
Standard
Time
16. Central
Europe
Standard
Time
18. Central
Pacific
Standard
Time
20. China
Standard
Time
22. E. Africa
Standard
Time
24. E. Europe
Standard
Time
26. Eastern
Standard
Time
28.
Ekaterinburg
Standard
[root#]timezone
[root#]timezone 40 n
Welltech Computer Co., Ltd.
Usage1 : timezone Zone (1 to 75)
AutoDaylight (Y or N)
Example1 : timezone 1 Y
Usage2 : timezone -custom Bias
DaylightBias DaylightStart StandardStart
Bias : -12:00 to +13:00
DaylightBias : -12:00 to +13:00
DaylightStart :
MM (Month: 01 to 12) ;
WD (Day of week: 00 to 06)
DD (Day:01 to 05 ;Specifies the
occurrence of day in the month;
01 = First occurrence of day,
02 = Second occurrence of
day, ..., 05 = Last occurrence of day
HH (Hour:00 to 23)
StandardStart :
MM (Month: 01 to 12) ;
WD (Day of week: 00 to 06)
DD (Day:01 to 05 ;Specifies the
occurrence of day in the month;
01 = First occurrence of day,
02 = Second occurrence of
day, ..., 05 = Last occurrence of day
HH (Hour:00 to 23)
Example2 : timezone -custom +08:00
-01:00 04-00-01-02 10-00-05-02
Show current timezone info
Time Zone : (40) Mexico Standard
Time (GMT -06:00)
Daylight Bias : -01:00
Daylight Start : 05-00-01 02:00
Standard Start : 09-00-05 02:00
Auto Daylight : Y
Use pre-defined timezone
Time Zone: (40) Mexico Standard Time
(GMT -06:00)
Daylight Bias : -01:00
Daylight Start : 05-00-01 02:00
Standard Start : 09-00-05 02:00
Auto Daylight : n
Boarder Gateway 5800 - 35 -
Welltech Computer Co., Ltd.
[root#]timezone
-custom +08:00
-01:00 05-00-01-03
09-00-05-03
Use customized timezone
Time Zone : (99) Customized (GMT
08:00)
Daylight Bias : -01:00
Daylight Start : 05-00-01 03:00
Standard Start : 09-00-05 03:00
Auto Daylight : Y
Useradmin: Manager User account
Command Purpose
[root#] useradmin ? Usage: useradmin [-add User]
[-delete User] [-password User]
Example: useradmin -add irene
[root#]useradmin
Show the current login user
account
root
[root#]useradmin -list
Show the current user account
list
admin
root
Irene
[root#] useradmin -add
Add the new user account: Irene
irene
Password : irene
Confirm : irene
Add user Success.
[root#] useradmin -delete
Delete the user: 1111
1111
Are You Sure?(Y/N)y
[root#] useradmin
-password root
Change the user: root’s
password.
New Password : 1234
Confirm : 1234
Boarder Gateway 5800 - 36 -
Welltech Computer Co., Ltd.
Chapter 7 LCD Display Configuration
Boarder Gateway 5800 provides a front panel LCD for basic
operations.
Button List:
Button List
Description
When the WellBG 5800 is ready, the LCD screen shows as
blow
Ready |
04-03-03
Press Enter to select command
Enter
Event Log
IP Config
ESC Quit the current command
▲ Up or previous edit mode
▼ Next or previous edit mode
Command Tree:
Main Menu
Event Log
Show system log message
IP Config
Network 1
Network 2
Reboot
Yes
No
Reset Yes
Show IP Info
Use DHCP
Use
Fixed IP
Boarder Gateway 5800 - 37 -
Welltech Computer Co., Ltd.
Event Log:
Configure
PWD
Soft
Reset
Shut
Down
LCD Display
No
Yes
No
Yes
No
▲ Previous event log
▼ Next event log
Enter Show detail event log
▲ Previous line
▼ Next line
ESC Quit detail event log viewing
ESC Quit to main menu
IP Config:
Configure
▲
▼
Enter
LCD Display
Select Network1 or Network2 configuration
Select Network1 or Network2 configuration
Configure Network1 or Network2
▲ Select Network configuration
▼ Select Network configuration
Enter Configure Network
▲ Increase the digit apply to network setting
▼ Decrease the digit apply to network setting
Enter Apply change to network information
ESC Quit network setting
ESC Quit to main menu
Reboot:
Configure
LCD Display
▲ Select Reboot or not
▼ Select Reboot or not
Enter Reset user: root’s (or admin) user password
ESC Quit Reboot configure
Boarder Gateway 5800 - 38 -
Welltech Computer Co., Ltd.
ESC Quit to main menu
Reset:
Configure
LCD Display
▲ Select user to change password
▼ Select user to change password
Enter Change user password
▲ Increase the alphabet apply to user password setting
▼
Decrease the alphabet apply to user password
setting
ESC Quit Reset configure
ESC Quit to main menu
Soft Reset:
Configure
LCD Display
▲ Select Reset or not
▼ Select Reset or not
Enter Reset or not
ESC Quit Reset configure
ESC Quit to main menu
Shutdown:
Configure
LCD Display
▲ Select Shutdown or not
▼ Select Shutdown or not
Enter Shutdown or not
ESC Quit Shutdown configure
ESC Quit to main menu
Boarder Gateway 5800 - 39 -
Welltech Computer Co., Ltd.
Appendix 1 Time zone to Country Mapping
List
Greenwich Mean Time & Country List Time Zone
(GMT-12:00) International Date Line
West
(GMT-11:00) Midway Island, Samoa 58. Samoa Standard Time
(GMT-10:00) Hawaii 35. Hawaiian Standard Time
(GMT-09:00) Alaska 02. Alaskan Standard Time
(GMT-08:00) Pacific Time (US &
Canada); Tijuana
(GMT-07:00) Mountain Time (US &
Canada)
(GMT-07:00) Chihuahua, La Paz,
Mazatlan
(GMT-07:00) Arizona 68. US Mountain Standard Time
(GMT-06:00) Saskatchewan
(GMT-06:00) Guadalajara, Mexico City,
Monterrey
(GMT-06:00) Central Time (US &
Canada)
(GMT-06:00) Central America
(GMT-05:00) Indiana (East) 67. US Eastern Standard Time
(GMT-05:00) Eastern Time (US &
Canada)
(GMT-05:00) Bogota, Lima, Quito 56. SA Pacific Standard Time
(GMT-04:00) Santiago 51. Pacific SA Standard Time
(GMT-04:00) Caracas, La Paz 57. SA Western Standard Time
(GMT-04:00) Atlantic Time (Canada) 06. Atlantic Standard Time
(GMT-03:30) Newfoundland 48. Newfoundland Standard Time
(GMT-03:00) Greenland 32. Greenland Standard Time
(GMT-03:00) Buenos Aires, Georgetown 55. SA Eastern Standard Time
(GMT-03:00) Brasilia
(GMT-02:00) Mid-Atlantic 42. Mid-Atlantic Standard Time
(GMT-01:00) Cape Verde Is. 11. Cape Verde Standard Time
21. Dateline Standard Time
52. Pacific Standard Time
43. Mountain Standard Time
41. Mexico Standard Time 2
10. Canada Central Standard
Time
40. Mexico Standard Time
19. Central Standard Time
14. Central America Standard
Time
26. Eastern Standard Time
25. E. South America Standard
Time
Boarder Gateway 5800 - 40 -
Welltech Computer Co., Ltd.
(GMT-01:00) Azores 09. Azores Standard Time
(GMT) Greenwich Mean Time: Dublin,
Edinburgh, Lisbon, London
(GMT) Casablanca, Monrovia 33. Greenwich Standard Time
(GMT+01:00) West Central Africa
(GMT+01:00) Sarajevo, Skopje,
Warsaw, Zagreb
(GMT+01:00) Brussels, Copenhagen,
Madrid, Paris
(GMT+01:00) Belgrade, Bratislava,
Budapest, Ljubljana, Prague
(GMT+01:00) Amsterdam, Berlin, Bern,
Rome, Stockholm, Vienna
(GMT+02:00) Jerusalem 38. Israel Standard Time
(GMT+02:00) Helsinki, Kyiv, Riga, Sofia,
Tallinn, Vilnius
(GMT+02:00) Harare, Pretoria 61. South Africa Standard Time
(GMT+02:00) Cairo 27. Egypt Standard Time
(GMT+02:00) Bucharest 24. E. Europe Standard Time
(GMT+02:00) Athens, Istanbul, Minsk 34. GTB Standard Time
(GMT+03:00) Nairobi 22. E. Africa Standard Time
(GMT+03:00) Moscow, St. Petersburg,
Volgograd
(GMT+03:00) Kuwait, Riyadh 03. Arab Standard Time
(GMT+03:00) Baghdad 05. Arabic Standard Time
(GMT+03:30) Tehran 37. Iran Standard Time
(GMT+04:00) Baku, Tbilisi, Yerevan 12. Caucasus Standard Time
(GMT+04:00) Abu Dhabi, Muscat 04. Arabian Standard Time
(GMT+04:30) Kabul 01. Afghanistan Standard Time
(GMT+05:00) Islamabad, Karachi,
Tashkent
(GMT+05:00) Ekaterinburg 28. Ekaterinburg Standard Time
(GMT+05:30) Chennai, Kolkata,
Mumbai, New Delhi
(GMT+05:45) Kathmandu 46. Nepal Standard Time
(GMT+06:00) Sri Jayawardenepura 62. Sri Lanka Standard Time
(GMT+06:00) Astana, Dhaka 15. Central Asia Standard Time
(GMT+06:00) Almaty, Novosibirsk 45. N. Central Asia Standard Time
(GMT+06:30) Rangoon 44. Myanmar Standard Time
(GMT+07:00) Krasnoyarsk 50. North Asia Standard Time
(GMT+07:00) Bangkok, Hanoi, Jakarta 59. SE Asia Standard Time
(GMT+08:00) Taipei 63. Taipei Standard Time
31. GMT Standard Time
71. W. Central Africa Standard
Time
17. Central European Standard
Time
53. Romance Standard Time
16. Central Europe Standard Time
72. W. Europe Standard Time
30. FLE Standard Time
54. Russian Standard Time
73. West Asia Standard Time
36. India Standard Time
Boarder Gateway 5800 - 41 -
Welltech Computer Co., Ltd.
(GMT+08:00) Perth 70. W. Australia Standard Time
(GMT+08:00) Kuala Lumpur, Singapore 60. Singapore Standard Time
(GMT+08:00) Irkutsk, Ulaan Bataar
(GMT+08:00) Beijing, Chongqing, Hong
Kong, Urumqi
(GMT+09:00) Yakutsk 75. Yakutsk Standard Time
(GMT+09:00) Seoul 39. Korea Standard Time
(GMT+09:00) Osaka, Sapporo, Tokyo 65. Tokyo Standard Time
(GMT+09:30) Darwin 07. AUS Central Standard Time
(GMT+09:30) Adelaide 13. Cen. Australia Standard Time
(GMT+10:00) Vladivostok 69. Vladivostok Standard Time
(GMT+10:00) Hobart 64. Tasmania Standard Time
(GMT+10:00) Guam, Port Moresby 74. West Pacific Standard Time
(GMT+10:00) Canberra, Melbourne,
Sydney
(GMT+10:00) Brisbane 23. E. Australia Standard Tim
(GMT+11:00) Magadan, Solomon Is.,
New Caledonia
(GMT+12:00) Fiji, KamChapterka,
Marshall Is.
(GMT+12:00) Auckland, Wellington 47. New Zealand Standard Time
(GMT+13:00) Nuku'alofa 66. Tonga Standard Time
49. North Asia East Standard
Time
20. China Standard Time
08. AUS Eastern Standard Time
18. Central Pacific Standard Time
29. Fiji Standard Time
Boarder Gateway 5800 - 42 -
Welltech Computer Co., Ltd.
Quick Function Reference
A
AAA……………………………………………………………19
Accounting IP……………………………………………..20
Accounting Port………………………………………….. 20
Accounting Retry Interval………………………………..20
Authorization IP………………………………………….. 19
Authorization Port………………………………………...19
Authorization Retry Interval……………………………...20
Backup Accounting IP…………………………………….20
Backup Accounting Port………………………………….20
Backup Authorization Port……………………………….20
Backup Authorization IP………………………………….20
Billing Message……………………………………………20
CDR Keepdays…………………………………………....20
CISCO Mode……………………………………………....20
Max Retry………………………………………………….20
Response Timer…………………………………………..20
Secret Key…………………………………………………20
Send Zero Session Time…………………………………20
Switch Threshold………………………………………….20
Account Manager…………………………………………. . 20
ACL…………………………………………………………… 18
ANI ACL……………………………………………………… 19
Apply change………………………………………………...12
D
Debug Configuration……………………………………… 17
Debug Info…………………………………………………... 26
Clear……………………………………………………… 27
Get Log……………………………………………………27
E
Event Log…………………………………………………….24
Date………………………………………………………..25
Description………………………………………………...25
Event ID……………………………………………………25
Source……………………………………………………...25
Boarder Gateway 5800 - 43 -
Welltech Computer Co., Ltd.
Time………………………………………………………...25
Type………………………………………………………...25
I
IP ACL………………………………………………………… 18
IP Address………………………………………………….18
N
NAT Group……………………………………………………17
Description………………………………………………...18
Group ID…………………………………………………...18
Network………………………………………………………...8
P
Ping…………………………………………………………….27
Host IP Address…………………………………………...27
R
Relogin………………………………………………………..22
S
Server Status………………………………………………...24
Application………………………………………………...24
Max App Pool……………………………………………..24
Max Call…………………………………………………...24
Max Register……………………………………………...24
Max Retry…………………………………………………24
Max Transaction………………………………………….24
Peak Used App Pool……………………………………..24
Status……………………………………………………...24
Used App Pool……………………………………………24
Used Call………………………………………………….24
Used Register…………………………………………….24
Used Transaction……………………………………….. 24
Version…………………………………………………….24
System Configuration……………………………………...13
ANI ACL…………………………………………………...13
Email From………………………………………………..14
Email To…………………………………………………...14
Enable System Log………………………………………14
Local UDP Port…………………………………………...13
IP ACL……………………………………………………..13
Boarder Gateway 5800 - 44 -
Welltech Computer Co., Ltd.
Max UAC NAT TTL………………………………………13
Min UAC NAT TTL……………………………………….13
Proxy Register TTL………………………………………14
Proxy Server……………………………………………...13
Proxy Service Port……………………………………….13
SIP Domain……………………………………………….13
STMP Server……………………………………………..14
Subject…………………………………………………….14
SysLogD Server IP………………………………………14
Version…………………………………………………….13
System Time…………………………………………………10
U
Upgrade……………………………………………………….22
File Name………………………………………………….22
Upload…………………………………………………….. 22
Boarder Gateway 5800 - 45 -
Index
A
D
E
I
N
P
R
S
U
Welltech Computer Co., Ltd.
AAA……………………………………………………………19
Account Manager…………………………………………. .20
ACL…………………………………………………………… 18
ANI ACL……………………………………………………… 19
Apply change………………………………………………...12
Debug Configuration………………………………………17
Debug Info…………………………………………………...26
Event Log……………………………………………………. 24
IP ACL…………………………………………………………18
NAT Group……………………………………………………17
Network………………………………………………………...8
Ping…………………………………………………………….27
Relogin………………………………………………………..22
Server Status………………………………………………...24
System Configuration……………………………………...13
System Time…………………………………………………10
Upgrade……………………………………………………….22
Boarder Gateway 5800 - 46 -
Loading...