Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA Telephone: +(773) 869 1234 E-mail: saleshelp@tripplite.com
Model #: SMART500RT1U
SmartPro Rack/Tower UPS - Intelligent, line interactive network power management system
Highlights
500VA line interactive 1U rack/tower UPS
6 outlets with 1 switchable load bank
Simultaneous communications via SNMPWEBCARD slot, USB and DB9 serial ports
Included PowerAlert UPS monitoring software manages an unlimited number of network UPS systems
Built-in voltage regulation corrects brownouts to 90V
$250,000 Ultimate Lifetime Insurance (USA, Puerto Rico & Canada only)
Description
Tripp Lite's SMART500RT1U intelligent, line interactive rack/tower uninterruptible power supply prevents data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Requires only one rack space (1U) in a 2 or 4 post rack, with included accessories for upright tower placement. Large internal batteries offer 8 minutes half load runtime and 3 minutes at full load. Maintains regulated 120V nominal output without using battery power during brownouts as low as 90V. 500VA/300 watt power handling capability is compatible with networking, telecom and other sensitive electronic applications. Includes 6 UPS supported outlets with a single outlet load bank that can be individually controlled via software interface to reboot select equipment on demand or shed less significant loads to extend battery runtime for more critical equipment. Includes 1 surge-only outlet for peripherals not requiring battery backup. Supports simultaneous remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. Includes PowerAlert UPS monitoring and unattended shutdown software with complete cabling. Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS and connected equipment in the case of fire or emergency situation. Multi-function audible alarms and set of 5 front panel LEDs offer at-a-glance notification of UPS and line power status. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges and line noise. Attractive all-black color scheme. Two year warranty with $250,000connected equipment insurance (USA & Canada only).
Applications
Ideal for protection of fileservers, network accessories and telecommunications equipment in server rooms, internetworking closets, co-location racks, kiosks and a variety of other locations. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems.
Package Includes
SMART 500RT1U UPS System
Mounting hardware
Cabling for USB & DB9 monitoring and EPO switching
PowerAlert unattended shutdown and UPS/Power monitoring software
Warranty information and instruction manual
Features
SMART500RT1U line interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during
brownouts, plus network-grade AC surge suppression
500VA/300 watt power handling capability compatible with networking, telecom and other sensitive electronic devices
Supports 1U rackmount installation in 2 or 4 post rack enclosures, upright tower placement also supported - mounting accessories included
Large internal batteries offer runtimes of 17 minutes at half load (250VA/150 watts) and 5 minutes at full load (500VA/300 watts)
Maintains regulated 120V nominal output during brownouts as low as 90V
Includes 6 UPS-supported outlets, with one pair of individually controllable outlets that can be powered off and back on again via software interface
PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands
Offers simultaneous monitoring by up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise management software is also available for select opportunities
Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity
Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected devices
Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW)
Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter
Emergency Power Off (EPO) interface with cable
Multi-function audible alarms and set of 5 front panel LEDs
Network-grade AC surge suppression
Attractive all-black color scheme
UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary Two year warranty with $250,000 connected equipment insurance (USA & Canada only)
Specifications
SYSTEM OVERVIEW
Voltage compatibility |
120 VAC |
|
|
Frequency |
60 Hz |
compatibility |
|
|
|
OUTPUT |
|
Output VA |
500 |
|
|
Output watts |
300 |
|
|
Output nominal |
120V AC |
voltage |
|
|
|
Output voltage |
LINE MODE: Sine wave line voltage 120V (-15% +13%), BATTERY MODE: PWM sine wave output within 10% of 120V |
regulation |
|
|
|
Output frequency |
LINE MODE: Passes line frequency of 60Hz +/-10% BATTERY MODE: Inverter output regulated to 60Hz +/-1Hz |
regulation |
|
|
|
Outlet quantity / type |
7 NEMA 5-15R |
|
|
Customized load |
Includes single-outlet load bank that supports load shedding and remote reboot on demand of locked network devices. |
management |
Controllable via PowerAlert software to switch off optional loads, like monitors, to increase available runtime for servers |
receptacles |
and other critical devices. |
|
|
Overload protection |
Via 15A input breaker |
|
|
INPUT |
|
Maximum input amps |
5.6A |
|
|
Input connection |
NEMA 5-15P |
type |
|
|
|
Input cord length |
10 ft., 14 gauge, Black |
|
|
Recommended |
15A 120V |
Electrical Service |
|
|
|
BATTERY |
|