tekmar 557 User Manuals

557_U

08/12

tekmarNet® Thermostat 557

User Manual

Zoning

Replaces: New

A Watts Water Technologies Company

1 of 12

This brochure will provide you with the information you need to benefit the most from your tekmarNet® thermostat. Please visit www.tekmarControls.com for more detailed information on this or any other tekmar product.

This thermostat provides heating and cooling for one zone in your building. It will maintain your air temperature with an on board room sensor. Floor temperature control may also be enabled in this thermostat when a floor sensor is installed. This thermostat can lower its temperature setting at night or when you are away from the house.

Touchscreen Adjustments

The touchscreen of this thermostat makes it easy to change commonly used settings. Touch any item to adjust it’s setting. You will hear a “tick” sound each time you touch the display. When you are finished making changes, touching the Home button will return to the Home screen. If you do not touch the screen for 3 seconds, the Home screen is automatically displayed.

Display Humidity, Heat &

Adjust

the Time

Adjust the

Schedule

Cool settings, Floor or Outdoor temperature

Room Temperature

Turn the Fan on

Away Key

Switch between

Auto, Heat,

Cool, Off &

Emergency Mode

Adjust the

Home

Button

Home Button. Return to the ‘Home’ Screen from any menu. Press and hold for 3 seconds to access the programming menus.

Temperature

Display of the time, schedule and the away key on the Home screen is optional and can be turned on or off in the programming menus.

To enter the programming menus, press and hold the Home button for 3 seconds.

A Watts Water Technologies Company

2 of 12

Display Symbols

This thermostat will display symbols on its screen in order to indicate what mode it is in, what temperature it is operating at, or what equipment it is trying to turn on. This section describes each of those symbols.

HEAT ON

Heat is turned on.

COOL ON

Cooling is turned on.

FAN

The fan is turned on.

%RH

Humidifying

%RH

Dehumidifying

SUN

Operating at the occupied (day) temperature.

MOON

Operating at the unoccupied (night) temperature.

tekmarNet

Communication is present.

WARNING SYMBOL

Indicates an error is present.

ARROWS

Adjust the displayed setting.

SCENE AWAY

Operating at Away temperature.

TEMPORARY HOLD

Hold for 3, 6, 9 or 12 hours.

WWSD

The outdoor air temperature is above the Warm Weather Shut Down setting which shuts off the heating system.

COOL

Radiant floor cooling system is on.

MIN or MAX

Reached the room minimum or maximum.

MIN FL or MAX FL

Reached the floor minimum or maximum.

A Watts Water Technologies Company

3 of 12

Adjust the Temperature

To change the heating or cooling set temperature, touch the or arrows to select a preferred temperature setting. Press the home button to accept the setting or leave the screen untouched for several seconds. To toggle between changing the heating or cooling setting, press the H <> C key. This thermostat is capable of controlling the floor or air temperature.

adjusts

Note: The temperature is not adjustable if the thermostat is in the Away scene, the Off mode or has been set to the “Limited” or “Secure” access level by the installer.

Adjust the Temperature - Temporary Hold

Temporary hold allows a user to change the temperature for a period of time and then automatically return to the permanent temperature setting. This is especially useful in commercial buildings that are in use for short amounts of time. When selected, touching the up or down arrows changes the temperature for either 3, 6, 9 or 12 hours. If the thermostat is using a schedule, ‘Schd’ provides a temporary hold until the next schedule event time. After the temporary hold time expires, the thermostat returns to normal operation. By default, the temporary hold feature is off.

When the temporary hold feature is enabled, touching the up or down arrow displays ‘TEMPORARY HOLD’.

Use the Up or Down

arrow to select a

A Watts Water Technologies Company

temperature.

4 of 12

Tap the hour setting until the preferred length of time is displayed.

Cancel the

temporary

hold.

‘HOLD’ is displayed while the thermostat is operating at the

temporary hold temperature.

+ 8 hidden pages