The parts with no reference number or no parts number
in the exploded views are not supplied.
As regards the resistors and capacitors, refer to the
circuit diagrams contained in this manual.
!
Parts marked with this sign are safety critical
components. they must be replaced with identical
components - refer to the appropriate parts list and
ensure exact replacement.
Parts of [ ] mark can be used only with the version designated.
[E]: EUROPE [UK]: U.K. [AUS]: AUSTRALIA
[HK]: HONG KONG [SIN]: SINGAPORE
MICRO Hi-Fi SYSTEM
1 SPECIFICATIONS
2 ADJUSTMENT AND CHECKS
3 EXPLODED VIEW AND PARTS LIST
4 PC BOARDS AND PARTS LISTS
5 WIRING DIAGRAM
6 INCLUDED ACCESSORIES
2
3
6
11
19
21
MC-DX15/20
Amplifier Section
Output Power (L+R)
Output Power Subwoofer:
Input Sensitivity
Frequency Response :
Tuner Section (FM)
Frequency Range
Sensitivity (S/N30dB)
Tuner Section (AM)
Frequency Range
Sensitivity (S/N20dB)
CD Player Section
Frequency Responce
Signa-to-Noise Ratio
Wow and Flutter
5W + 5W
15 W
300mV
50 to 20,000 Hz
87.5 MHz to 108.0 MHz
20dBuV
522 to 1620 kHz
54dBuV/m
20 to 20,000 Hz (+/-1dB)
55 dB
Unmeasurable
1 SPECIFICATIONS
SPEAKER SYSTEM Section
L & R speaker :
Type :
Impedance :
Subwoofer:
Impedance :
Full range flat type
4 ohms
8 ohms
GENERAL
Power Requirements:
Power Consumption:
Dimension (W x H x D ):
Weight: (net)
Standard Accessories:
AC230V, 50 Hz
80 W
Main Unit 160 x 226 x 86 mm
L & R Speaker 140 x 226 x 61mm
Subwoofer 160 x 234 x 330mm
Main Unit 0.96 kg
L & R Speaker 0.6 kg(each)
Subwoofer 5.3 kg
Remote Control Unit x 1
Subwoofer Cable x 1
Speaker Cable x 2
FM Antenna x 1
AM Antenna x 1
Battery for Remote Control x 1
Wall Mount Adaptor x 3
Wall Mount screw x 10
Tape Plastic Wall Anchor x 10
Template for Wall Mounting x 1
Owner s Manual x 1
Warranty Card x 1
Design and specifications are subject to change without notice.
Illustrations may differ slightly from production models.
Weight and dimensions are approximate.
2
2 ADJUSTMENTS AND CHECKS
2-1 TUNER SECTION
Use a screwdriver with a plastic or ceramic grip for all adjustment.
2-1-1 FM adjustment
1. Set the function switch to the FM position.
2. Connect the signal generator output through a 75 ohm dummy
antenna to "ANT" on MAIN PCB.
3. Connect the oscilloscope to the speaker terminal.
4. Set the signal generator as listed in the alignment chart.
2-1-2 AM adjustment
1. Set the function switch to the AM position.
2. Connect the test loop antenna across the output of the signal generator.
3. Connect the oscilloscope to the speaker terminal.
4. Set the signal generator as listed in the alignment chart.
MC-DX15/20
2-2 Adjustment and Test Points
T203
T204
T205
T206
L201
SVC201
L202
SVC202
MC-DX15/20 MAIN(TUNER) PCB
3
MC-DX15/20
2-2-1 FM/AM alignment chart
ITEM
FM
1.IFT adjustment
2. FM band
3. Tracking
AM
1. IF adjustment
SG SETTING
10.7 MHz
1kHz, +/-22.5kHz dev.
87.5MHz
1kHz, +/-22.5kHz dev.
90MHz
1kHz, +/-22.5kHz dev.
106MHz
1kHz, +/-22.5kHz dev.
Repeat step 3
455kHz
1kHz, 30% mod
TUNER SETTING
108MHz
87.5MHz
90MHz
106MHz
1620kHz
ADJUSTMENT POINT
T205
L202
L201
SVC201
T203
ADJUSTMENT
With 10.7 MHz at
zero crossover
Adjust for max. output
and best waveform.
Center for max. output.
2. AM band
3. Tracking
522kHz
1kHz, 30% mod
600kHz
1kHz, 30% mod
1400kHz
1kHz, 30% mod
Repeat step 3
2-3 CD SECTION
Auto alignment.
522kHz
600kHz
1400kHz
T206
AM ant coil (T204)
Adjust for max. output
and best waveform.
SVC202
4
MC-DX15/20
2-4 Version s Differences
MC-DX15
MC-DX20
,
Version
Australia
Australia
Europe
UK
Hong Kong
Singapore
AUS
AUS
EUR
UK
HK
SIN
Color
SILVER
BLACKAUSYESNONO
SILVERVDEYESYESYESYES
SILVERUKYESYESYESYES
SILVERUKYESNOYES
SILVERVDEYESNOYES
AC PlugMP3
AUSNONO
75 OHM
Terminal
YES
YES
YES
YES
RDS
Low Power
Consumption Standby
Circuit (Subwoofer)
NO
5
MC-DX15/20
3 3
3 EXPLODED VIEWS AND PARTS LIST
EXPLODED VIEW - 1
1 1
2 2
7 7
1 1
8
42 42
16 16
19 19
15 15
17 17
6 6
5 5
4 4
12 12
11 11
9 9
12 12
1010
1010
50 50
20 20
22
16 16
23 23
22
30 30
12 12
25 25
31 31
32 32
50 50
26 26
33 33
13 13
24 24
55 55
35 35
34 34
14 14
52 52
53 53
27 27
36 36
47 47
51 51
28 28
53 53
52 52
3838
29 29
3939
53 53
37 37
52 52
4040
5959
41 41
5656
43 43
5858
48 48
54 54
54 54
43 43
5757
49 49
18 18
46 46
21 21
6
44 44
45 45
EXPLODED VIEW-1
REF. NO
1-1
1-2
1-3
PARTS NO.
19-50DX01500020
19-50DX01500030
56-07DX0155A000
56-07DX0155B000
56-78DX0151G000
MC-DX15/20
DESCRIPTION
SPEAKER BOX ASSY - MC-DX20 [AUS]
SPEAKER BOX ASSY - MC-DX15, MC-DX20 [E,UK,HK,SIN]
FULL WALL PLATE-SPEAKER - MC-DX15,MC-DX20 [E,UK,HK,SIN] - SILVER COL
FULL WALL PLATE-SPEAKER - MC-DX20 [ AUS] - BLACK COL
CD DOOR CHROME RING
CD ALUM COVER DIA 68MM
CD DOOR LENS
CD DOOR PVC PLATE
CD DOOR - MC-DX15 - SILVER COL
CD DOOR - MC-DX20 [AUS] - BLK COL
CD DOOR - MC-DX20 [HK,SIN] - SILVER COL
CD DOOR - MC-DX20 [E,UK] - SILVER COL
RUBBER RING D5.4X3X1.5MM
CD MECH. (SAMSUNG) CMS-M95BG6
SHOCK ABSORBER (GREY) AC112-SI-20C
SHOCK ABSORBER- BLACK
FIBRE WASHER 3X6X0.4MM
CLOSE SW PCB ASSY
RUBBER RING D5.4X3X1MM
REMOTE LENS
DISPLAY LENS
FRONT CABINET - MC-DX15 - SILVER COL
FRONT CABINET - MC-DX20 [AUS] - BLACK COL
FRONT CABINET - MC-DX20 [HK,SIN] - SILVER COL
FRONT CABINET - MC-DX20 [E,UK] - SILVER COL
OPEN SW PCB ASSY
FERRM SHAFT 155X3MM
DRIVE BELT DIA 31X1MM
PVC WASHER D4X1.6X0.3MM
STRAP GEAR
DOOR MOTOR PULLY
CD DOOR GEAR
MOTOR BRACKET
MOTOR 3V
HP/AUX JACK PCB ASSY
KNOB RING-L
POWER KNOB-UNIT - SILVER COL
POWER KNOB-UNIT - BLACK COL
REMOTE BRACKET
CD KNOB GROUP - MC-DX15, MC-DX20 [E,UK,HK,SIN] - SILVER COL
CD KNOB GROUP - MC-DX20 [AUS] - BLACK COL
KNOB RING-R
CD DOOR OPEN KNOB -SILVER COL
CD DOOR OPEN KNOB - BLACK COL
LIGHT COVER
KEY/DISPLAY PCB ASSY -MC-DX15, MC-DX20 [HK,SIN]
KEY/DISPLAY PCB ASSY -MC-DX20 [AUS]
KEY/DISPLAY PCB ASSY - MC-DX20 [E,UK]
REAR CABINET - MC-DX15, MC-DX20 [E,UK,HK,SIN] - SILVER COL
REAR CABINET - MC-DX20 [AUS] - BLACK COL
FULL WALL PLATE - UNIT - MC-DX15, MC-DX20 [E,UK,HK,SIN] - SILVER COL
FULL WALL PLATE - UNIT - BLACK COLMC-DX20 [AUS] RUBBER FOOT