Sony HCD-DR3, HCD-DR330, HCD-XB200 Service Manual

HCD-DR3/DR330/XB200

SERVICE MANUAL

AEP Model

UK Model

HCD-XB200

E Model

HCD-DR3/DR330

Australian Model

HCD-DR3

HCD-DR3/DR330/XB200 is the tuner, deck, CD and amplifier section in LBT-DR3/ DR330/XB200.

Manufactured under license from Dolby Laboratories Licensing Corporation.

“DOLBY” and the double-D symbol aare trademarks of Dolby Laboratories Licensing Corporation.

	CD	Model Name Using Similar Mechanism	HCD-G2500
	SECTION	Base Unit Type	KSM-213ECM/C2NP
		Optical Pick-up Type	KSS-213E/C2N
	TAPE	Model Name Using Similar Mechanism	NEW
	DECK
		Tape Transport Mechanism Type	CWL-44-RR
	SECTION

SPECIFICATIONS

Amplifier section		MD/VIDEO IN (phono jacks):		Wavelength	780 – 790 nm
(LBT-XB200)			sensitivity 250mV,	Frequency response	20Hz – 20kHz (±0.5 dB)
DIN power output (Rated)	70W + 70W		impedance 47 kΩ	Signal-to-noise retio	More than 90 dB
	(6 Ω at 1 kHz DIN)	Outputs		Dynamic range	More than 90 dB
Continuous RMS power output (Reference)		PHONOS (stereo phono jacks):		DIGITAL OUT
	80W + 80W		accepts headphones of 8 Ω	(Square optical connector jack, rear panel)
	(6 Ω at 1 kHz, 10%		or more	Wavelength	600 nm
	THD)	MD/VIDEO OUT (phone jack):		Output Level	–18 dBm
Music power output (Reference)			voltage 250mV,
	140W + 140W		impedance 1 kΩ	Tape deck section
	(6 Ω at 1 kHz, 10%	SPEAKER:	accepts impedance of 6 to	Recording system	4-track 2-channel stereo
	THD)		16 Ω	Frequency response (DOLBY NR OFF)
(LBT-DR330/DR3)					60 – 13,000 Hz (±3 dB),
The following measured at AC 110/220V, 60Hz ;		CD player section			using a Sony TYPE I
Continuous RMS power output (Reference)		System	Compact disc and digital		cassette
	85W + 85W		audio system
	(6 Ω at 1 kHz, 10%	Laser	Semiconductor laser	Tuner section
	THD)		(λ = 780 nm)	FM stereo, FM/AM superheterodyne tuner
DIN power output (Rated)	70W + 70W		Emission
	(6 Ω at 1 kHz, DIN)		duration: continuous	FM tunr section
		Laser output	Max. 44.6µW*	Tuning range	87.5 – 108.0 MHz
The following measured at AC 120/240V, 60Hz ;			*This output is the value		(50 kHz step)
Continuous RMS power output (Reference)			measured at a distance of
	100W + 100W		200 mm from the objective
	(6 Ω at 1 kHz, 10%		lens surface on the Optical		Continued on next page
	THD)		Pock-up Block with 7 mm
DIN power output (Rated)	80W + 80W		aperture.
	(6 Ω at 1 kHz, DIN)

Inputs

PHONO IN (phono jack): COMPACT Hi-Fi STEREO SYSTEM

sensitivity 3mV, impedance 47 kΩ

MICROFILM

HCD-DR3/DR330/XB200

5-4. SCHEMATIC DIAGRAM MAIN (1/3) SECTION

• Refer to page 15 for Waveform. • Refer to page 31 for IC Block Diagrams.

19 19

HCD-DR3/DR330/XB200

5-5. SCHEMATIC DIAGRAM MAIN (2/3) SECTION

• Refer to page 15 for Waveform. • Refer to page 18 for Printed Wiring Board.

20

20