262755
|
|
Plug |
-In |
|||
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Digital
Timer
7-Day
3
2
4
1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GB |
1) |
Timer Socket |
||||
2) |
Control Buttons |
|||||
3) |
Display |
|||||
|
|
4) |
ON/AUTO/OFF Button |
|||
ELECTRICAL SAFETY
•Even when used as prescribed it is not possible to eliminate all residual risk factors. Use with caution. If you are at all unsure of the correct and safe manner in which to use this product, do not attempt to use it
UNPACKING YOUR TOOL
•Carefully unpack and inspect your tool. Fully familiarise yourself with all its features and functions
•Ensure that all parts of the tool are present and in good condition. If any parts are missing or damaged, have such parts replaced before attempting to use this tool
OPERATING
Setting the time
1.To set the time on the Display (3), press and hold the ‘CLOCK’ button and press the ‘HOUR’ button and ‘MINUTE’ button.
2.The timer has 8 different timer slots.To scroll through them press the ‘PROG’ button.The display will show the ‘On’ and ‘Off’ time for each time slot.
3.To return back to the clock display, press the ‘CLOCK’ button
Setting the ‘On’ and ‘Off’ times
1.To set an On time, scroll to the ‘ON’ section of the required slot then press the ‘WEEK’ button until the option which matches your requirements is displayed across the top of the display
2.Press the ‘HOUR’ button and ‘MINUTE’ button to set the time
3.To set the Off time, press the ‘PROG’ button one more time until ‘OFF’ is displayed.
4.Then follow the previous instructions to set the Off time
Activating and overriding the timer
•To activate the timer, press the ‘ON/AUTO/OFF’ Button (4) until ‘AUTO’ is displayed on the bottom of the screen
•To override the timer function press the ‘ON/AUTO/OFF’ button to display either ‘MANUAL OFF’ or ‘MANUAL ON’
Resetting and Random functions
•To reset or clear any of the slots, scroll to the relevant slot and press the ‘R’ button
Operation
•Once the timer has been set, plug it into a power socket and switch the socket on. The green light on the timer will illuminate to indicate power is available
•Switch on the appliance and plug it into the Timer Socket (1)
•When the red light is illuminated, it indicates power is available to the appliance
NOTE: For the timer to activate the appliance, the power switch on the appliance must be in the on position
MAINTENANCE
•Use a dry brush to keep the timer free from dust and debris, which may affect the timer function buttons
EC DECLARATION OF CONFORMITY
The undersigned: Mr Darrell Morris as authorised by: Silverline Tools Declares that the
Name / model: Plug-In Digital Timer
Type / serial no: 262755
Conforms to the following Directives:
•Low Voltage Directive 2006/95/EC
•EMC Directive 2004/108/EC
•ROHS Directive 2002/95/EC
•EN60335-1:2002+A13:2008
•EN55014-1:2006, EN55014-2:1997+A2:2008
•EN61000-3-2:2006, EN61000-3-3:2008
The technical documentation is kept by: Silverline Tools
Notified body: Shenzhen BST Technology Co Ltd
Place of declaration: Shenzhen, China
Date: 31/10/11
Signed by:
Director
Name and address of Manufacturer or Authorised representative:
Silverline Tools, Boundary Way, Lufton Trading Estate, Yeovil, Somerset, BA22 8HZ United Kingdom
www.silverlinetools.com
Loading...