These operating instructions are a component of the Hand Blender Set SSMS
600 B3 (henceforth designated as the appliance) and they supply you with
important information for the intended use, safety, connection and operation of
the appliance.
These operating instructions must be constantly kept available close to the appliance. They are to be read and applied by everyone assigned to operate the
appliance and to eliminate faults with it.
Retain these operating instructions and pass them on, together with the appliance,
to any future owners.
Copyright
This documentation is copyright protected.
Any copying or reproduction, including as extracts, as well as the reproduction of
images, also in an altered state, is only permitted with the written authorisation of
the manufacturer.
Intended use
This hand blender is intended exclusively for processing foodstuff s in small quantities.
It is intended exclusively for use in domestic households. This hand blender set is
not intended for commercial applications.
WARNING
Danger from unintended use!
Danger can come from the appliance if used for unintended purposes and/or
other types of use.
Use the appliance exclusively for intended purposes. ►
Observe the procedures described in these operating instructions. ►
NOTICE
Risks can can be engendered if the appliance if used for unintended purposes ►
and/or other types of use. Use the appliance exclusively for its intended
purposes. Obser
Claims of any kind resulting from damage caused by improper use, incompetent repairs, unauthorized modifi cations or the use of non-approved
spare parts will not be acknowledged. The operator alone bears liability.
2
ve the procedures described in these operating instructions.
SSMS 600 B3
Safety instructions
RISK OF ELECTRIC SHOCK
Connect this hand blender only to correctly installed mains power sockets ►
supplying a power voltage of 220 - 240 V ~ / 50 Hz.
Disconnect the hand blender fr
faulty operation and before beginning to clean it.
Do not expose the appliance to humidity and do not use it outdoors. ►
Should liquids enter the housing, disconnect the appliance from the mains ►
power socket immediately and arrange for it to be repaired by a qualifi ed
technician.
To unplug the appliance, always pull the plug from the socket, do not pull ►
on the power cable itself.
Do not crease or crimp the power cable and place it in such a way as to ►
prevent anyone from stepping on or tripping over it.
To avoid unnecessary risks, arrange for defective power plugs and/or ►
cables to be replaced at once by qualifi ed technicians or our Customer
Service Department.
You may not open the motor unit housing of the hand blender. Should you ►
do so, the safety concept of the appliance may be compromised and the
warranty becomes void.
This appliance is not intended for use by individuals (including children) ►
with restricted physical, physiological or intellectual abilities or defi ciences
xperience and/or knowledge unless they are supervised by a person
in e
responsible for their safety or receive from this person instruction in how the
appliance is to be used.
Children should be supervised to ensure that they do not play with the ►
appliance.
GB
IE
CY
om the mains power socket if you notice any ►
SSMS 600 B3
RISK OF ELECTRIC SHOCK
Under no circumstances may the motor unit of the hand mixer be im-
sed in liquids, or liquids be permitted to permeate into the motor
mer
unit housing.
WARNING! RISK OF INJURY!
Switch off the appliance and disconnect from supply before changing ►
accessories or approaching parts which move in use.
Fundamentally, always disconnect the appliance from the mains power ►
socket when the unit is to be left unattended.
3
GB
IE
CY
Items supplied
The appliance is delivered with the following components as standard:
Hand Blender Set ▯
Measuring beaker with combined lid/base ▯
Whisk ▯
Liquidiser (Blade and bowl with combined lid/base) ▯
Wall bracket ▯
2 x Plugs ▯
2 x Screws ▯
Operating instructions ▯
Remove all parts of the appliance and these operating instructions from the 1)
bo
x.
Remove all packing material. 2)
Clean all parts of the appliance as described in the chapter “Cleaning”.3)
NOTICE
Check the contents to make sure everything is there and for visible damage. ►
If the contents are incomplete, or have been damaged due to defective ►
packaging or transportation, contact the Service Hotline (see chapter
vice).
Ser
Disposal of the packaging
The packaging protects the appliance from transport damage. The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material
and reduces generated waste. Dispose of packaging material that is no longer
needed according to the regionally established regulations.
NOTICE
If possible preserve the appliance's original packaging during the warranty ►
period so that in the case of a warranty claim you can package the appliance pr
4
operly for return.
SSMS 600 B3
Technical data
Voltage220 - 240 V ~, 50 Hz
Nominal Power Rating600 W
GB
IE
CY
Protection Class
Capacity:
Measuring beaker
Max. fi ll volume for fl uids
We recommend the following operating times:
Let the hand blender cool after 1 minute of operation.
Let the liquidiser cool after 1 minute of operation.
Let the whisk cool after 2 minute of operation.
II
700 ml
300 ml
Description of appliance / Accessories
1 Speed regulator
2 Switch (Standard Speed)
3 Turbo-Switch (High Speed)
4 Motor unit
5 Hand blender
6 Bowl lid
7 Blade
8 Bowl (with combined lid/base)
9 Whisk holder
0 Whisk
q Measuring beaker (with combined lid/base)
w Wall bracket, incl. screws & plugs
SSMS 600 B3
5
GB
IE
CY
Utilisation
NOTICE
With the measuring beaker ►q y
700 ml. For food processing, fi ll it to a maximun of 300 ml, otherwise
fl uids could overfl ow from the measuring beaker q.
Should you wish to keep liquids/foods in the measuring beaker ►q, you
can remove the base of the measuring beaker q and use it as a lid.
Ensure that the spout of the measuring beaker q is also closed.
With this hand blender ■5 y
food. We recommend using the hand blender 5 for a maximum of 1 minute
at a time and then letting it cool down.
WARNING - PROPERTY DAMAGE!
Do not use this hand blender for the ►5 pr
This would lead to irreparable damage to the appliance!
With the whisk ■0 you can whip cream, beat egg whites and mix pastry,
desserts or mayonnaise. We recommend using the whisk 0 for a maximum
of 2 minutes at a time and then letting it cool down.
With the liquidiser, comprising of the blade ■7, bo
you can also liquidise solid foods. We recommend using the liquidiser for
a maximum of 1 minute at a time and then letting it cool down.
WARNING - PROPERTY DAMAGE!
Do not use the liquidiser to process liquids. This would lead to irreparable ►
damage to the appliance!
ou can measure volumes of fl uids up to
ou can prepare dips, sauces, soups or baby
eparation of solid foods.
wl 8 and bowl lid 6,
6
SSMS 600 B3
Assembling
WARNING! RISK OF INJURY!
Only insert the plug into the power socket after you have assembled the ►
appliance for use.
NOTICE
Before the fi rst use, clean all parts as described in the chapter “Cleaning”. ►
To assemble the hand blender
WARNING! RISK OF INJURY!
The blade is extremely sharp! Handle it with great care. ►
Place the hand blender ■5 on the motor unit 4 so that the arr
the symbol
points to the symbol
Assembling the wire whisk
Insert the whisk ■0 into the whisk holder 9.
Place the so assembled whisk ■0 onto the motor block 4 so that the arr
points to the symbol
symbol
. Turn the hand blender 5 until the arrow on the motor unit 4
.
Turn the motor block 4 until the arrow points at the
.
GB
IE
CY
ow points to
ow
Assembling the liquidiser
WARNING! RISK OF INJURY!
The blade ►7 is e
Carefully place the blade ■7 onto its retainer in the bowl 8.
Fill the bowl with the foodstuff s you wish to liquidise ■8.
NOTICE
NEVER fi ll the bowl ►8 BEY
appliance does not function optimally.
SSMS 600 B3
xtremely sharp! Handle it with great care.
OND the MAX marking. Otherwise, the
7
GB
IE
CY
Place the bowl lid ■6 onto the bowl 8 and turn it until tight. Thereby, the
lugs on the edge of the bowl 8 must be guided into the rail on the bowl
lid 6.
Place the motor unit ■4 on the bo
symbol
NOTICE
Should you wish to keep foodstuff s in the bowl ►8 y
base of the bowl 8 and use it as a lid. For this, carefully remove the bowl
lid 6 and motor unit 4 and, if needs be, the blade 7. Loosen the base
of the bowl 8 and then place it onto the bowl 8.
. Turn the motor unit 4 until the arrow points to the symbol .
Holding the appliance
To operate the appliance, hold it as follows:
wl lid 6 so that the arrow points to the
ou can remove the
8
SSMS 600 B3
Operation
WARNING! RISK OF INJURY!
Foodstuff s should not be too hot. Squirting contents may cause scalding. ►
NOTICE
When you beat cream with the whisk ►0 hold the container at a slant
during the beating. In this w
that cream cannot be sprayed out of the container while it is being beaten.
When whipping cream, slide the speed regulator 1 to position "5".
When you have assembled the blender set as you wish to use it:
Insert the plug into a mains power socket. 1)
Press and hold the switch 2) 2 to process foodstuff s at the standard speed.
Slide the speed regulator 1 in the direction of “5” to increase the speed.
Slide the speed regulator 1 in the direction of “1” to reduce the speed.
Press and hold the turbo-switch 3) 3 to process foodstuff s at a higher speed.
By pressing the turbo-switch 3 the maximum processing speed is available
immediately.
When you have completed the processing of the foodstuff s, simply release 4)
the switch.
NOTICE
Should unusual noises be heard during operation, such as squeaks or ►
similar, lubricate the drive shaft of the blender with a few drops of neutral
cooking oil:
GB
IE
CY
ay the cream will be thicker quicker. Ensure
SSMS 600 B3
9
GB
IE
CY
Examples for the chopping and liquiding of various foods with the liquidiser:
Ingredients
Onions
Parsley
Garlic
Baby-carrots
Hazelnuts/
Almonds
Walnuts
Parmesan
1 cm
max.
amount
200 gapprox. 20 Sec.Level 1 - 3
30 g approx. 20 Sec.Turbo
20 clovesapprox. 20 Sec.Level 1 - 5
200 gapprox. 15 Sec.Level 1 - 5
200 g approx. 30 Sec.Turbo
200 g approx. 25 Sec.Level 3 - 4
250 gapprox. 30 Sec.Turbo
Processing timeSPEED
10
SSMS 600 B3
Loading...
+ 25 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.