IAN 110458
KITCHEN RADIO SKR 800 A1
KITCHEN RADIO
Operating instructions
KÜCHENRADIO
Bedienungsanleitung
GB / IE Operating instructions Page 1
DE / AT / CH Bedienungsanleitung Seite 19
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of
the device.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen
Funktionen des Gerätes vertraut.
IAN 110458
KITCHEN RADIO SKR 800 A1
KITCHEN RADIO
Operating instructions
KONYHAI RÁDIÓ
Használati utasítás
RADIO KUCHENNE
Instrukcja obsługi
KUCHYNSKÉ RÁDIO
Návod na obsluhu
KUCHYŇSKÉ RÁDIO
Návod k obsluze
KÜCHENRADIO
Bedienungsanleitung
1SKR 800 A1
GB
IE
Contents
Introduction .................2
Information concerning these operating
instructions ........................2
Copyright ........................2
Intended use ......................2
Warning notes. . . . . . . . . . . . . . . . . . . . .3
Safety ......................4
Risk of electrocution ................4
Handling batteries ..................4
Basic safety guidelines ..............5
Descriptions of components ....6
Before use ...................7
Check the package contents ..........7
Disposal of packaging materials .......7
Set-up location requirements ..........7
Installation under a wall cupboard .....8
Dismantling .......................9
Setting up the device ................9
Connecting the power supply .........9
Inserting batteries ..................9
FM wire aerial .....................9
Handling and operation ......10
Setting the time, alarm time and alarm
type ............................10
To switch the alarm function on or off . .11
Switching off the alarm .............11
Switching radio mode on/off ........11
Adjusting the volume ...............12
Adjusting stations manually ..........12
Searching for the next station ........12
Automatic station search (AMS function) 12
Retrieving saved radio stations .......12
Receiving stations in mono quality ....13
Kitchen timer .....................13
Cleaning ...................14
Cleaning the housing ..............14
Troubleshooting .............15
Fault causes and rectification ........15
Storage/Disposal ............16
Storage .........................16
Disposal of the device ..............16
Disposing of the batteries ...........16
Appendix ..................16
Notes concerning the EC Declaration
of Conformity ....................16
Technical data ....................17
Warranty ........................18
Service .........................18
Importer. . . . . . . . . . . . . . . . . . . . . . . . .18
2 SKR 800 A1
GB
IE
Introduction
Information concerning these operating instructions
Congratulations on the purchase of your new device.
You have selected a high-quality product. The operating instructions are part of this product.
They contain important information on safety, usage and disposal. Before using the product,
familiarise yourself with all handling and safety guidelines. Use the product only as described
and for the range of applications specified. Keep these operating instructions in a safe
place. Please also pass these operating instructions on to any future owner(s).
Copyright
This documentation is protected by copyright. Any copying or reproduction, including in
the form of extracts, or any reproduction of images (even in a modified state), is permitted
only with the written authorisation of the manufacturer.
Intended use
This device is a consumer electronics device designed for the reception of FM radio programmes, as a kitchen timer and as an alarm by means of an alarm tone or radio.
It is intended only for indoor use. The device is intended as a free standing unit or for
installation under a wall cupboard. For these purposes the integrated stand or mounting
plate must be used. It is not intended for any other or more extensive use. This device is
not intended for use in commercial or industrial environments. The manufacturer accepts
no responsibility for damage caused by failure to observe these instructions, improper
use or repairs, unauthorised modifications or the use of unapproved replacement parts.
The risk shall be borne solely by the user.
3SKR 800 A1
GB
IE
Warning notes
The following warning notice types are used in these operating instructions:
DANGER
A warning notice at this hazard level indicates an imminently hazardous
situation.
If the hazardous situation is not avoided, it could result in death or serious physical
injury.
► Follow the instructions in this warning notice to avoid the risk of death or serious
injury.
WARNING
A warning notice at this hazard level indicates a potentially hazardous
situation.
Failure to avoid this hazardous situation could result in injury.
► Follow the instructions in this warning notice to prevent injury.
CAUTION
A warning notice at this hazard level indicates a potential for property
damage.
Failure to avoid this situation could result in property damage.
► Follow the instructions in this warning notice to prevent property damage.
NOTE
► A note provides additional information that will assist you in using the device.
4 SKR 800 A1
GB
IE
Safety
In this section, you will find important safety instructions for using the device. This device
complies with statutory safety regulations. Improper use may result in personal injury and
property damage.
Risk of electrocution
DANGER
Risk of fatal injury from electrocution!
Contact with live cables or components can result in fatal injury!
Comply with the following safety information in order to avoid the risk of electric shock:
► Do not use the device if the mains power plug or the connection cable are damaged.
► When disconnecting the device from the mains supply, always pull on the plug and
never on the cable.
► Never touch the mains plug or the device with wet hands.
► The device housing must not be opened under any circumstances. There is a risk of
electric shock or fire if live connections are touched and the electrical and mechanical
structure is changed.
► Do not insert any objects into the ventilation slots or other openings on the device.
► The device consumes power in standby mode. To completely disconnect the device
from the mains power, the power plug must be removed from the mains power
socket. The device should be positioned so that you have unrestricted access to
the mains power socket at all times, and can pull out the plug immediately in an
emergency.
Handling batteries
DANGER
Mishandling the batteries can cause fires, explosions, leakages or
other hazards!
► Do not throw the batteries into a fire and do not subject them to high temperatures.
► Do not open, deform or short-circuit batteries, since this can lead to chemical leakage.
► Do not attempt to recharge batteries. Do not charge batteries unless they are explicitly
labelled as "rechargeable". There is a risk of explosion!
► Check the condition of the batteries at regular intervals. Leaking chemicals can
cause permanent damage to the device. Take particular care when handling
damaged or leaking batteries. Risk of acid burns! Wear protective gloves.
► Chemicals which leak from a battery can cause skin irritation. In the event of contact
with the skin, rinse with plenty of water. If the chemicals come into contact with your
eyes, rinse thoroughly with water, do not rub and consult a doctor immediately.
5SKR 800 A1
GB
IE
DANGER
►
Keep batteries out of the reach of children.
Children might put batteries into their mouth and swallow them. If a battery has
been swallowed, seek medical assistance IMMEDIATELY.
► Do not mix different types of batteries.
► Always insert the batteries the right way round (observe correct polarity) otherwise
there is a danger that they could explode.
► If you do not intend to use the device for a long time, remove the batteries.
Basic safety guidelines
To ensure safe operation of the device, follow the safety guidelines set out below:
■ This device may be used by children aged 8 years and above and by persons with
limited physical, sensory or mental capabilities or lack of experience and knowledge,
provided that they are under supervision or have been told how to use the device
safely and are aware of the potential risks. Children must not use the device as a
plaything. Cleaning and user maintenance tasks may not be carried out by children
unless they are supervised.
■ Check the device for visible external damage before use. Do not operate a device
that has been damaged or dropped.
■ If the cables or connections are damaged, have them replaced by an authorised
specialist or the Customer Service department.
■ Protect the connection cable from hot surfaces and sharp edges.
■ Ensure that the power cable is not stretched tightly or kinked.
■ Do not allow the cable to dangle over edges (tripwire effect).
■ All repairs must be carried out by authorised specialist companies or by the Customer
Service department. Failure to make proper repairs may put the user at risk. It will
also invalidate any warranty claims.
■ Defective components must always be replaced with original replacement parts.
Compliance with the safety requirements can only be guaranteed by using these
replacement parts.
■ Do not make any unauthorised modifications or alterations to the device.
■ Always place the device on a stable and level surface. It can be damaged if dropped.
■ Do not expose the device to direct sunlight or high temperatures. Otherwise it may
overheat and be irreparably damaged.
■ Be sure to provide sufficient air circulation to avoid a heat build-up. Never cover the
device! Risk of fire!
■ Do not place the product near heat sources such as radiators or other heat-generat-
ing devices.
■ Do not operate the device close to naked flames (e.g. candles).
6 SKR 800 A1
GB
IE
■ The device is not designed for use in rooms with high temperatures or humidity
(e.g. bathrooms) or where there is excessive dust.
■ Protect the device from drips or splashes of water. Never immerse the device in water
and do not set up the device in the close vicinity of water and do not place objects
filled with liquids (e.g. vases) onto the device.
■ If you notice a burning smell or smoke, pull out the plug immediately and remove the
batteries.
■ In the case of a malfunction occurring or a thunderstorm, disconnect the plug from
the mains power socket.
■ DANGER! Do not allow children to play with the packaging material! Keep all
packaging materials out of the reach of children. Risk of suffocation!
Descriptions of components
(see fold-out page)
TIMER switch
2
button
3
button
4
Mounting plate
5
Display
6
button
7
button
8
VOLUME/DISPLAY/ dial
9
Stand (folding)
10
Loudspeaker
11
Power cable
12
Battery compartment
13
Cable antenna for FM reception
14
Spacer (for under-cabinet installation)
15
Mounting screw (long)
16
Mounting screw (short)
17
Operating instructions
7SKR 800 A1
GB
IE
Before use
Check the package contents
♦ Remove all parts of the device and the operating instructions from the box.
♦ Remove all packaging material.
The package contents include the following components:
▯ Kitchen Radio SKR 800 A1
▯ Mounting plate
4
(pre-assembled)
▯ 4 x spacers
14
▯ 4 mounting screws (long)
15
▯ 4 mounting screws (short)
16
▯ These operating instructions
17
NOTE
► Check the package for completeness and for signs of visible damage.
► If any items are missing or damaged as a result of defective packaging or insufficient
care during transportation, contact the Service hotline (see the section Service).
Disposal of packaging materials
The packaging protects the device from damage during carriage. The packaging materials
have been selected for their environmental friendliness and ease of disposal, and are
therefore recyclable.
Returning the packaging to the material cycle conserves raw materials and
reduces the amount of waste which is generated. Dispose of packaging materials
that are no longer needed in accordance with applicable local regulations.
NOTE
► If possible, keep the device's original packaging for the warranty period so that the
device can be packed properly for return shipment in the event of a warranty claim.
Set-up location requirements
For safe and trouble-free operation of the device, the set-up location must fulfil the following
requirements:
■ When setting it up, place the device on a firm, flat and horizontal surface. Use the
fold-out stand.
■ The surfaces of some items of furniture might contain components that can corrode
and soften the rubber feet of the device. If necessary, place a cover under the
device's rubber feet.
■ Set up or mount the device in such a way that the ventilation openings and the
speaker are not covered.
8 SKR 800 A1
GB
IE
■ Do not place the device in a hot, wet or extremely damp environment or in the vicinity
of flammable materials.
■ The mounting location must be selected so that the device is not exposed to steam.
Do not install the device directly over a hotplate.
■ The mains power socket must be easily accessible so that the power cable can be
easily disconnected in an emergency.
Installation under a wall cupboard
3,1 cm
6,3 cm
You can install the device under a wall cupboard using the supplied mounting plate 4.
Proceed as follows to mount the device:
♦ Slide the mounting plate to the rear and remove it from the device.
♦ Find a suitable installation location for the device (see also the section Set-up
location requirements).
♦ Hold the mounting plate under the installation location. Ensure that the front edge
of the mounting plate is approx. 3.1cm behind the front of the cupboard so that the
device is flush with the cupboard after installation. The side edges of the mounting
plate must be around 6.3cm from any adjacent cabinets or walls.
♦ Mark the 4 mounting points with a pencil.
♦ Using a spike or nail, make a small depression at the respective marking points.
♦ If required, place the supplied spacers
14
between the cupboard and the mounting
plate. If using the spacers, you will need the long mounting screws 15.
♦ Screw the mounting plate tight using the mounting screws (15 or 16) provided.
♦ Push the device with its top against the mounting plate 4 until it clicks audibly into
place.
♦ Check to ensure that the device is securely seated.
9SKR 800 A1
GB
IE
Dismantling
♦ Pull the device forwards off the mounting plate.
♦ Unscrew the screws (
15
or 16) on the mounting plate and remove the mounting plate
from the wall cupboard.
Setting up the device
As an alternative you can stand the device on a level surface. To prevent the ventilation slots
and speaker
10
on the bottom of the device from being covered, the device's stand 9
must be folded outwards:
♦ Reach into the recess on the side of the stand and pull it out as far as it will go.
♦ Select a suitable location for the device (see also the section Set-up location
requirements).
Connecting the power supply
CAUTION
► Before connecting the device compare the connection data (voltage and frequency)
on the rating plate with that of your electric supply. These data must agree so that
no damage is sustained by the device.
♦ Insert the power plug into a mains wall socket. The time (
) flashes on the display 5.
Inserting batteries
By inserting 2 x 1.5V batteries (type AA/Mignon/LR6) you can prevent the programmed
time or saved stations from being lost in the event of a power failure. The batteries make
sure that the internal clock continues to run even during a power outage. When power is
restored, the correct time automatically appears on the display.
NOTE
► The device can also be operated without a battery. The display, radio and alarm
do not function in emergency mode.
♦ Open the cover of the battery compartment
12
on the bottom of the device.
♦ Insert 2 x 1.5V batteries (type AA/Mignon/LR6) (not supplied) into the battery
compartment. Insert the batteries as shown on the polarity diagram in the battery
compartment.
♦ Then close the battery compartment by replacing the cover and snapping it into place.
FM wire aerial
♦ Completely unwind the wire aerial 13 for FM radio reception.
Loading...