SILVERCREST SKBL 56 A1 User manual [gb]

TRUE WIRELESS BLUETOOTH® STEREO SPEAKER SET SKBL 56 A1
TRUE WIRELESS BLUETOOTH® STEREO SPEAKER SET
Operating instructions
TRUE WIRELESS BLUETOOTH®-STEREO-LAUTSPRECHER-SET
Bedienungsanleitung
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen Funktionen des Gerätes vertraut.
GB / IE / NI Operating instructions Page 1 DE / AT / CH Bedienungsanleitung Seite 19
A
2 x
B
2 x
Introduction ........................................ 2
Information about these operating instructions .......................2
Copyright ...................................................2
Notes on trademarks ..........................................2
Intended use .................................................2
Warnings ...................................................3
Safety ............................................3
Basic safety instructions ........................................4
Description of components ........................... 5
Use ............................................... 6
Unpacking ..................................................6
Check package contents .......................................6
Disposal of the packaging ......................................6
Charging the speaker ..........................................7
Handling and use ................................... 7
Switching the speakers on/off ...................................7
Operating the speakers in mono mode ............................8
Operating the speakers in stereo mode ............................9
Function of the buttons for music playback ....................... 11
Telephone functions ......................................... 11
AUX IN mode .............................................. 12
Automatic switch-off ......................................... 13
Troubleshooting ................................... 13
Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Storage when not in use ............................14
Disposal .......................................... 14
Appendix ......................................... 15
Technical data ............................................. 15
Notes on the EU Declaration of Conformity ....................... 15
Kompernass Handels GmbH warranty .......................... 16
Service ................................................... 17
Importer .................................................. 18
SKBL 56 A1
GBIENI
 1
Introduction
Information about these operating instructions
Congratulations on the purchase of your new device. You have selected a high-quality product. The operating instructions are part of this product. They contain important information about safety, use and disposal. Before using the product, please familiarise yourself with all operating and safety instructions. Use the product only as described and for the range of applications specified. Keep these operating instructions as a reference and store them near the product. Please pass on all documentation incl. these operating instructions to any future owner(s), if you sell this product or give it away.
Copyright
This documentation is protected by copyright. Any copying or reproduction, including in the form of extracts, or any reproduc­tion of images (even in a modified state), is permitted only with the written authorisation of the manufacturer.
 GBIENI
2 
Notes on trademarks
USB® is a registered trademark of USB Implementers Forum, Inc.
®
The Bluetooth of Bluetooth SIG, Inc. (Special Interest Group). Any use of the trademarks by Kompernaß Handels GmbH is made under the provision of a licence.
The SilverCrest trademark and the retail name are the property of their respective owner.
All other names and products may be trademarks or registered trademarks of their respective owner.
logotype and Bluetooth® logo are registered trademarks
Intended use
This consumer electronics device is used to play back audio files which can be transferred via Bluetooth® or 3.5-mm jack cable. You can use the speaker as a hands-free kit to take calls using the integrated microphone if there is an existing Bluetooth® connection. The device is not intended for any other purpose, nor for use beyond the scope described.
SKBL 56 A1
The device is not intended for use in commercial or industrial environments. The manufacturer accepts no responsibility for damage caused by failure to observe these instructions, improper use or repairs, unauthorised modifications or the use of unapproved replacement parts. The risk shall be borne solely by the user.
Warnings
The following types of warning are used in these operating instructions:
DANGER
A warning at this hazard level indicates a potentially hazardous situation.
Failure to avoid this hazardous situation could result in severe injuries or even death.
Follow the instructions in this warning notice to avoid the risk of serious
injuries or death.
CAUTION
A warning notice of this hazard level indicates a risk of property damage.
Failure to avoid this situation could result in property damage.
Follow the instructions in this warning notice to prevent material damage.
NOTE
A note provides additional information that makes handling the device
easier for you.
Safety
This section contains important safety instructions for handling the device. This device complies with statutory safety regulations. Improper use may result in personal injury and property damage.
SKBL 56 A1
GBIENI
 3
Basic safety instructions
To ensure safe operation of the device, follow the safety guidelines set out below:
Check the device for visible external damage before use. Do not operate
a device that has been damaged or dropped.
DANGER! Do not allow children to play with the packaging material!
Keep all packaging materials away from children.
There is a risk of suffocation! This product contains small parts that could be swallowed (removable rubber feet). Keep it out of the hands of children.
This device may be used by children aged 8 years and above and by
persons with limited physical, sensory or mental capabilities, or lack of experience and knowledge, provided that they are under supervision or have been told how to use the device safely and are aware of the potential risks. Children must not play with the device. Cleaning and user maintenance tasks may not be carried out by children unless they are supervised.
If the charger cable or connections are damaged, have them replaced
by an authorised specialist or the customer service department.
 GBIENI
4 
Protect the charger cable from hot surfaces and sharp edges.
Ensure that the charger cable is not stretched tightly or kinked.
Always place the device on a stable and level surface. It can be damaged
if dropped.
Do not expose the device to direct sunlight or high temperatures. Otherwise
it may overheat and be irreparably damaged.
DANGER! Do not operate the device close to naked flames (e.g.
candles) and do not place burning candles on or next to the device. This will help to prevent fires.
The device may heat up while it is charging. Place the speaker in a well-
ventilated location during the charging process and do not cover it.
The device is not designed for use in rooms with high temperatures or
humidity (e.g. bathrooms) or where there is excessive dust.
Protect the device from penetration by moisture and liquids. Never submerge
the device in water or place objects filled with liquids (e.g. vases) next to the device.
SKBL 56 A1
Switch the device off immediately and disconnect any connected cables
from the device if you hear any unusual noises, smell fumes or notice any smoke. Have the device checked by a qualified specialist before using it again.
All repairs must be carried out by authorised specialist companies or by
the customer service department. Improper repairs may put the user at risk. It will also invalidate any warranty claims. This device may not be opened by the user.
The device has an integrated lithium-ion battery. Mishandling the lithium-ion
batteries can cause fires, explosions, leakage of dangerous chemicals or other hazards! Do not throw the device into an open fire.
Do not make any unauthorised modifications or alterations to the device.
This device may not be opened by the user.
Comply with all restrictions or prohibitions on use for battery-powered
devices in locations with specific hazard risks, e.g. petrol stations, aero­planes, hospitals, etc.
Description of components
(See fold-out page for illustrations)
Figure A:
button button button
3.5-mm jack (AUX IN) Micro-USB charging socket (POWER INPUT) Rubber foot Microphone Operating/charging LED
Figure B:
Charging cable (USB to micro-USB)
3.5-mm jack cable Operating instructions (symbol image)
SKBL 56 A1
GBIENI
 5
Use
Unpacking
Remove all parts and the operating instructions from the box.Remove all packaging material.
Check package contents
(See fold-out page for illustrations)
The product includes the following components:
®
2 x True Wireless Bluetooth2 x charging cables (USB to micro-USB)3.5-mm jack cable (3.5 mm to 3.5 mm)These operating instructions
NOTE
Check the package for completeness and signs of visible damage.If the delivery is incomplete or damage has occurred as a result of
defective packaging or during transport, contact the service hotline (see section Service).
 GBIENI
6 
Stereo Speaker SKBL 56 A1
Disposal of the packaging
The packaging protects the device from damage during transport. The pack­aging materials have been selected for their environmental friendliness and ease of disposal and are therefore recyclable.
Returning the packaging to the material cycle conserves raw
materials and reduces the amount of waste that is generated. Dispose of packaging materials that are no longer needed in accordance with applicable local regulations.
NOTE
If possible, keep the original device packaging for the entire duration
of the warranty period so that the device can be packaged properly for return shipment in the event of a warranty claim.
SKBL 56 A1
Charging the speaker
CAUTION
Charge the speakers only in dry interior spaces.
Before using the speakers, the integrated batteries must be completely charged.
Make sure that the speakers are switched off. If a device is switched
on, the operating/charging LED button for approx. 2 seconds to switch off a device.
Connect the USB plugs on the charger cables
power supply.
Connect the micro-USB plugs on the charger cables
cro-USB charging sockets (POWER INPUT)
NOTE
The operating/charging LED
When the battery is fully charged, the charging LED turns off.
lights up. Press the
to a PC or to a USB
to the mi-
on the speakers.
lights up orange during recharging.
NOTE
Charging takes about 3 hours at a charging current of 500 mA. When the battery is fully charged, you can play back music for about 4 hours at a medium volume. The playback time may vary depending on usage (volume).
When the battery is empty, you will hear two beeps at intervals of just
a few seconds, and the operating/charging LED twice every 15 seconds. The device then switches off automatically.
flashes orange
Handling and use
This section provides you with important information on handling and using the device.
Switching the speakers on/off
Press and hold the button for about 2 seconds to turn a
speaker on and activate the Bluetooth® function. You will hear a beep and the operating/charging LED blue.
flashes alternatively orange and
SKBL 56 A1
GBIENI
 7
Press and hold the
button for about 2 seconds to turn one
speaker off and deactivate the Bluetooth® function. You will hear a beep. The operating/charging LED
will go out.
Press and hold the
button for about 2 seconds to turn a
speaker on and activate the Bluetooth® function. You will hear a beep and the operating/charging LED
flashes alternatively orange and blue.
NOTE
®
If the two speakers are coupled with each other via Bluetooth
, then
both speakers will switch off as soon as you switch off one speaker.
Operating the speakers in mono mode
When supplied, the speakers are preset in mono mode by default. This means you can pair each speaker with a one playback device. Before you can use the speakers, you must pair them with a compatible Bluetooth® device.
Make sure that the speakers are switched off and the Bluetooth
device is switched on.
Set the Bluetooth
®
device so that it scans for other Bluetooth®
devices. A detailed description of how to do this can be found in the operating instructions for your Bluetooth® device.
 GBIENI
8 
®
NOTE
Make sure that the speakers are no more than 10 metres from the
Bluetooth
®
device and each other. Make sure that there are no
barriers or electronic devices placed between them.
Select SKBL 56 A1 from the list of found devices on your Bluetooth
device to pair the two devices. You will hear a short beep when the connection has been successfully established. The operating/charging
flashes twice every 3 seconds.
LED
If you want to operate the second speaker in mono mode with a different
Bluetooth
®
playback device, carry out the process described above
with the second speaker. Make sure you do not switch on the second speaker until you have paired the first speaker with a Bluetooth® playback device.
SKBL 56 A1
®
You can now use the speaker to listen to your favourite tunes wirelessly.
NOTE
The next time you turn on the speakers they will connect automatically
to the last-connected Bluetooth
®
device. If your Bluetooth® device
does not automatically reconnect, you will have to re-establish the connection manually. A detailed description of how to do this can be found in the operating instructions for your Bluetooth
If you want to connect the speaker to another Bluetooth
®
device.
®
device,
you must first unpair the current Bluetooth® device. To do this, hold down the
button and the button ( ) of the
affected speaker for about 2 seconds until you hear a beep. Alterna­tively, you can terminate the connection on your Bluetooth® device. In this case, you will also hear a beep.
Operating the speakers in stereo mode
You can also operate both speakers at the same time from the same Bluetooth® device. Then each speaker will play back one audio channel.
Make sure that the speakers are switched off and the Bluetooth
device is switched on.
Set the Bluetooth
®
device so that it scans for other Bluetooth®
devices. A detailed description of how to do this can be found in the operating instructions for your Bluetooth® device.
Press and hold the
button for about 2 seconds to turn a
speaker on and activate the Bluetooth® function. You will hear a beep and the operating/charging LED
flashes alternatively orange and
blue. If the speaker connects automatically to an already paired
Bluetooth® playback device, then terminate this connection. To do
this, hold down the
button and the button ( )
of the affected speaker for about 2 seconds until you hear a beep.
®
SKBL 56 A1
GBIENI
 9
Repeat the process with the second speaker. Wait a moment. If the speak-
ers do not automatically pair with each other, place one of the speakers manually into pairing mode. To do this, hold down the and the
button ( ) of the affected speaker for about 2 seconds
button
until you hear a higher-pitched beep. Wait a moment. As soon as the two speakers automatically pair with each other, the operating/charging
of both speakers light up blue. You will hear a beep.
LEDs
Select SKBL 56 A1 from the list of found devices on your Bluetooth
device to pair it to a speaker. You will hear a short beep when the connec­tion has been successfully established. The operating/charging LED on the connected speaker will also permanently light up orange. This speaker will output the left stereo channel.
10 
 GBIENI
NOTE
The next time you turn on the speakers, they will connect automatically to each other. To unpair the speakers, proceed as follows.
If you want to connect the speaker to another Bluetooth
must first unpair the current Bluetooth® device. To do this, hold down
button and the button ( ) of the affected
the
®
speaker for about 2 seconds until you hear a beep. Alternatively, you can terminate the connection on your Bluetooth® device. In this case, you will also hear a beep.
®
device, you
SKBL 56 A1
Function of the buttons for music playback
Button Function
Press briefly to play/pause the music.
/
/
Press and hold until you hear a beep to switch the
speaker on or off. The device must be re-paired with your Bluetooth
®
device before you can reuse it.
Press briefly to increase the volume. When you reach
the maximum volume you will hear a brief tone.
Press and hold for approx. 2 seconds to jump to the
next track.
Press briefly to decrease the volume. When you reach
the minimum volume (mute), you will hear a short beep.
Press and hold for 2 seconds to jump back to begin-
ning of the current track. Within 2 seconds, press and hold again for 2 seconds to jump to the previous track.
Button Function
&
/
(
Press and hold both buttons at the same time for
about 2 seconds to activate or deactivate the Bluetooth
)
connection. When the Bluetooth® function is acti­vated, the two speakers connect automatically.
Telephone functions
If you use a smartphone as your Bluetooth® playback device, the
audio playback will be paused when there is an incoming call.
Acceptance/termination of the call can be carried out via the smartphone
or the speaker. The sound is played on the device speaker.
Speak into the device microphone
You can switch the audio source at any time via your smartphone. To do
so, please follow the operating manual of your smartphone.
After finishing the call, the playback of the audio file will be continued
automatically.
to make your call.
®
SKBL 56 A1
GBIENI
 11
Functions of the button
NOTE
Depending on the smartphone used, not all functions described will be
available.
Function
Accept call Press 1 x (for incoming call). End call Press 1 x (during call).
Reject call
Call last-dialled number
Press and hold for approx. 2 seconds (for incom­ing calls).
Press 2 x
button
AUX IN mode
You can also listen to music from an audio device connected via a 3.5mm jack cable
Bluetooth® connection is terminated.
Make sure that both speakers are switched off.
12 
. In AUX IN mode, stereo operation is not possible. An existing
 GBIENI
Press and hold the
speaker on. You will hear a beep and the operating/charging LED flashes alternatively orange and blue.
Use a 3.5 mm jack cable
mm jack socket (AUX IN)
flashes every second blue.
LED
Start playback on the audio device and set the volume to a moderate
level.
Then set the desired volume using the
button on the speaker.
Press the
NOTE
If you connect a 3.5 mm jack cable
Bluetooth® operation, the speaker will automatically switch to play-
back from the connected device.
button if you want to mute the speaker.
button for about 2 seconds to turn a
to connect the audio device to the 3.5 of the speaker. The operating/charging
button or the
to one of the speakers during
SKBL 56 A1
Automatic switch-off
If the 3.5-mm jack socket is not in use or their is no playback via Bluetooth®, the speakers automatically switch off after about 10 minutes.
The operating/charging LED
will go out and you will hear a beep.
Any existing Bluetooth® connection will be terminated.
Press and hold the
button for about 4 seconds to turn a
speaker back on.
NOTE
The automatic switch-off function does not work while the speakers are
charging.
Troubleshooting
If you cannot pair the speakers to a compatible Bluetooth® music device, proceed as follows:
Make sure that the Bluetooth
device. When a device is connected via a 3.5-mm jack cable, the
Bluetooth® function is deactivated.
®
function is activated on the music
Ensure that the speaker is switched on.If you use several music devices, ensure that any previous connection
is disconnected (see section Function of the buttons for music play- back). There may be a previously paired device within range.
Make sure that the speakers are no more than 10 metres from the
Bluetooth
®
device and each other. Make sure that there are no
barriers or electronic devices placed between them.
Device does not switch on.
The integrated battery is not charged.
Charge the battery (see section Charging the speaker).
No sound.
The volume on the device or the playback device is set to minimum.
Increase the volume on the device or on the playback device.
Playback has not been started on the playback device. Start playback
on the playback device.
SKBL 56 A1
GBIENI
 13
The two speakers will not connect to each other.
The speakers are not in pairing mode. To change this, press and hold
the
button and the button ( ) of one of the speakers for about 2 seconds until you hear a beep. Wait a moment until the speakers have connected to each other.
NOTE
If you cannot solve the problem with the above-mentioned solutions,
please contact the Service Hotline (see section Service).
Cleaning
CAUTION
To avoid irreparable damage to the device, ensure that no moisture
can penetrate the device during cleaning.
Do not use caustic, abrasive or solvent-based cleaning materials. These
can damage the surfaces of the device.
14 
 GBIENI
Clean the housing of the device with a lightly moistened cloth and a
mild detergent only.
Storage when not in use
Store the device in a location which is clean, dry, dust-free and not in
direct sunlight.
To ensure a long battery life, charge the battery at regular intervals.
Disposal
Disposal of the device
The adjacent symbol of a crossed-out dustbin means that this device is subject to Directive 2012/19/EU. This directive states
that this device may not be disposed of in the normal household waste at the end of its lifecycle, but should be delivered to specially set-up collection locations, recycling depots or disposal companies.
This disposal is free of charge for the user. Protect the envi­ronment and dispose of this device properly.
You can obtain further information from your local disposal company or the city or local authority.
SKBL 56 A1
Appendix
Technical data
Operating voltage/current 5 V , 500 mA via USB charging port
®
Bluetooth
Supported Bluetooth profiles
Output power approx. 2.8 W RMS @ 10% THD Frequencies 20Hz–20kHz Impedance 4 Ω Integrated rechargeable
battery in each speaker Operating time approx. 4 hrs (at a medium volume)
Charging time
Working temperature +15°C to +35°C Storage temperature +5°C to +40°C
specifications Version 4.2 (range of up to 10 metres)
®
A2DP*, AVRCP*, HFP and HSP
*if supported by the smartphone
3.7 V / 500 mAh (lithium-ion)
approx. 3 hrs. (at a charging current of 500
mA)
Relative humidity (no condensation)
5 to 75%
Dimensions (W x D x H) approx. 10 x 10 x 5 cm Weight approx. 225g
Notes on the EU Declaration of Conformity
This device complies with R&TTE directive 1999/5/EC, EMC directive 2014/30/EU and RoHS directive 2011/65/EU with
regard to correspondence with the basic requirements and other relevant regulations. The complete EU Declaration of Conformity is available from the importer.
SKBL 56 A1
GBIENI
 15
Kompernass Handels GmbH warranty
Dear Customer, This appliance has a 3-year warranty valid from the date of purchase. If this
product has any faults, you, the buyer, have certain statutory rights. Your stat­utory rights are not restricted in any way by the warranty described below.
Warranty conditions
The validity period of the warranty starts from the date of purchase. Please keep your original receipt in a safe place. This document will be required as proof of purchase.
If any material or production fault occurs within three years of the date of purchase of the product, we will either repair or replace the product for you at our discretion.
This warranty service is dependent on you presenting the defective appli­ance and the proof of purchase (receipt) and a short written description of the fault and its time of occurrence.
If the defect is covered by the warranty, your product will either be repaired or replaced by us. The repair or replacement of a product does not signify the beginning of a new warranty period.
16 
 GBIENI
Warranty period and statutory claims for defects
The warranty period is not prolonged by repairs effected under the warranty. This also applies to replaced and repaired components. Any damage and defects present at the time of purchase must be reported immediately after unpacking. Repairs carried out after expiry of the warranty period shall be subject to a fee.
Scope of the warranty
This appliance has been manufactured in accordance with strict quality guidelines and inspected meticulously prior to delivery.
The warranty covers material faults or production faults. The warranty does not extend to product parts subject to normal wear and tear or fragile parts such as switches, batteries, baking moulds or parts made of glass.
The warranty does not apply if the product has been damaged, improperly used or improperly maintained. The directions in the operating instructions for the product regarding proper use of the product are to be strictly fol­lowed. Uses and actions that are discouraged in the operating instructions or which are warned against must be avoided.
SKBL 56 A1
This product is intended solely for private use and not for commercial purposes. The warranty shall be deemed void in cases of misuse or improper handling, use of force and modifications / repairs which have not been carried out by one of our authorised Service centres.
Warranty claim procedure
To ensure quick processing of your case, please observe the following in­structions:
Please have the till receipt and the item number (e.g. IAN 12345) availa-
ble as proof of purchase.
You will find the item number on the type plate, an engraving on the front
page of the instructions (bottom left), or as a sticker on the rear or bottom of the appliance.
If functional or other defects occur, please contact the service department
listed either by telephone or by e-mail.
You can return a defective product to us free of charge to the service
address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.
You can download these instructions along with many other manuals, product videos and software on www.lidl-service.com.
Service
Service Great Britain
Tel.: 0871 5000 720 (£ 0.10/Min.) E-Mail: kompernass@lidl.co.uk
Service Ireland
Tel.: 1890 930 034 (0,08 EUR/Min., (peak)) (0,06 EUR/Min., (off peak)) E-Mail: kompernass@lidl.ie
IAN 282774
SKBL 56 A1
GBIENI
 17
Importer
Please note that the following address is not the service address. Please use the service address provided in the operating instructions.
KOMPERNASS HANDELS GMBH BURGSTRASSE 21 DE-44867 BOCHUM GERMANY www.kompernass.com
18 
 GBIENI
SKBL 56 A1
Einführung ........................................20
Informationen zu dieser Bedienungsanleitung ..................... 20
Urheberrecht .............................................. 20
Hinweise zu Warenzeichen ................................... 20
Bestimmungsgemäße Verwendung ............................. 20
Warnhinweise .............................................. 21
Sicherheit ......................................... 21
Grundlegende Sicherheitshinweise ............................. 22
Teilebschreibung ................................... 23
Inbetriebnahme ...................................24
Auspacken ................................................ 24
Lieferumfang prüfen ......................................... 24
Entsorgung der Verpackung ................................... 24
Lautsprecher laden .......................................... 25
Bedienung und Betrieb ..............................25
Lautsprecher ein-/ausschalten ................................. 25
Lautsprecher im Mono-Modus betreiben ......................... 26
Lautsprecher im Stereo-Modus betreiben ......................... 27
Funktion der Tasten für die Musikwiedergabe ..................... 29
Telefonfunktionen ........................................... 29
AUX IN-Betrieb ............................................. 30
Automatische Abschaltung .................................... 31
Fehlersuche .......................................31
Reinigung ........................................32
Lagerung bei Nichtbenutzung ........................ 32
Entsorgung .......................................32
Anhang .......................................... 33
Technische Daten ...........................................33
Hinweise zur EU-Konformitätserklärung .......................... 33
Garantie der Kompernaß Handels GmbH ........................ 34
Service ................................................... 35
Importeur ................................................. 36
SKBL 56 A1
DE│AT│CH 
 19
Einführung
Informationen zu dieser Bedienungsanleitung
Herzlichen Glückwunsch zum Kauf Ihres neuen Gerätes. Sie haben sich damit für ein hochwertiges Produkt entschieden. Die Bedienungs­anleitung ist Bestandteil dieses Produkts. Sie enthält wichtige Hinweise für Sicherheit, Gebrauch und Entsorgung. Machen Sie sich vor der Benutzung des Produkts mit allen Bedien- und Sicherheits hinweisen vertraut. Benutzen Sie das Produkt nur wie beschrieben und für die angegebenen Einsatzbereiche. Bewahren Sie die Bedienungsanleitung immer als Nachschlagewerk in der Nähe des Produkts auf. Händigen Sie bei Weiter gabe oder Verkauf des Produktes an Dritte alle Unterlagen inkl. dieser Bedienungsanleitung mit aus.
Urheberrecht
Diese Dokumentation ist urheberrechtlich geschützt. Jede Vervielfältigung, bzw. jeder Nachdruck, auch auszugsweise, sowie die Wiedergabe der Abbildungen, auch im veränderten Zustand ist nur mit schrift­licher Zustimmung des Herstellers gestattet.
Hinweise zu Warenzeichen
USB® ist eingetragenes Warenzeichen von USB Implementers Forum, Inc.
®
Die Bluetooth Warenzeichen der Bluetooth SIG, Inc. (Special Interest Group). Jegliche Ver­wendung der Warenzeichen durch die Kompernaß Handels GmbH erfolgt im Rahmen einer Lizenz.
Das SilverCrest Warenzeichen und der Handelsname sind Eigentum des jeweiligen Inhabers.
Alle weiteren Namen und Produkte können die Warenzeichen oder eingetra­gene Warenzeichen ihrer jeweiligen Eigentümer sein.
Wortmarke und das Bluetooth® Logo sind eingetragene
Bestimmungsgemäße Verwendung
Dieses Gerät der Unterhaltungselektronik dient zur Wiedergabe von Audioda­teien welche via Bluetooth® oder 3,5 mm-Klinkenkabel zugespielt werden können. Bei bestehen der Bluetooth®-Verbindung können Sie den Lautsprecher, aufgrund des integrierten Mikrofons, als Freisprech anlage verwenden, um Anrufe entgegenzunehmen. Eine andere oder darüber hinausgehende Benutzung gilt als nicht bestimmungsgemäß.
20 │ DE
│AT│
CH
SKBL 56 A1
Das Gerät ist nicht zur Verwendung in gewerblichen oder industriellen Bereichen vorgesehen. Ansprüche jeglicher Art wegen Schäden aus nicht bestimmungsgemäßer Verwendung, unsachgemäßen Reparaturen, unerlaubt vorgenommener Veränderungen oder Verwendung nicht zugelassener Ersatzteile sind ausgeschlossen. Das Risiko trägt allein der Benutzer.
Warnhinweise
In der vorliegenden Bedienungsanleitung werden folgende Warnhinweise verwendet:
GEFAHR
Ein Warnhinweis dieser Gefahrenstufe kennzeichnet eine mögliche gefährliche Situation.
Falls die gefährliche Situation nicht vermieden wird, kann dies zu schweren Verletzungen oder zum Tod führen.
Die Anweisungen in diesem Warnhinweis befolgen, um die Gefahr von
schweren Verletzungen oder des Todes zu vermeiden.
ACHTUNG
Ein Warnhinweis dieser Gefahrenstufe kennzeichnet einen möglichen Sachschaden.
Falls die Situation nicht vermieden wird, kann dies zu Sachschäden führen.
Die Anweisungen in diesem Warnhinweis befolgen, um Sachschäden
zu vermeiden.
HINWEIS
Ein Hinweis kennzeichnet zusätzliche Informationen, die den Umgang
mit dem Gerät erleichtern.
Sicherheit
In diesem Kapitel erhalten Sie wichtige Sicherheitshinweise im Umgang mit dem Gerät. Dieses Gerät entspricht den vorgeschriebenen Sicherheitsbestim­mungen. Ein unsachgemäßer Gebrauch kann zu Personen- und Sachschäden führen.
SKBL 56 A1
DE│AT│CH 
 21
Grundlegende Sicherheitshinweise
Beachten Sie für einen sicheren Umgang mit dem Gerät die folgenden Sicherheitshinweise:
Kontrollieren Sie das Gerät vor der Verwendung auf äußere sichtbare
Schäden. Nehmen Sie ein beschädigtes oder heruntergefallenes Gerät nicht in Betrieb.
GEFAHR! Verpackungsmaterialien sind kein Kinderspielzeug! Halten
Sie alle Verpackungsmaterialien von Kindern fern.
Es besteht Erstickungsgefahr! Das Produkt enthält verschluckbare Kleinteile (abnehmbare Gummifüße). Halten Sie es von Kindern fern.
Dieses Gerät kann von Kindern ab 8 Jahren und darüber sowie von Personen
mit verringerten physischen, sensorischen oder mentalen Fähigkeiten oder Mangel an Erfahrung und Wissen benutzt werden, wenn Sie beaufsichtigt oder bezüglich des sicheren Gebrauchs des Gerätes unterwiesen wurden und die daraus resultierenden Gefahren verstehen. Kinder dürfen nicht mit dem Gerät spielen. Reinigung und Benutzer-Wartung dürfen nicht von Kindern ohne Beaufsichtigung durchgeführt werden.
Bei Beschädigung des Ladekabels oder Anschlüsse lassen Sie diese von
autorisiertem Fachpersonal oder dem Kundenservice austauschen.
Schützen Sie das Ladekabel vor heißen Oberflächen und scharfen Kanten.
Achten Sie darauf, dass das Ladekabel nicht straff gespannt oder
geknickt wird.
Stellen Sie das Gerät immer auf eine stabile und gerade Fläche. Bei Stürzen
kann es beschädigt werden.
Setzen Sie das Gerät nicht direktem Sonnenlicht oder hohen Tempera turen
aus. Anderenfalls kann es überhitzen und irreparabel beschädigt werden.
GEFAHR! Betreiben Sie das Gerät nicht in der Nähe von offenen
Flammen (z.B. Kerzen) und stellen Sie keine brennenden Kerzen auf oder neben das Gerät. So helfen Sie Brände zu vermeiden.
Während des Ladevorgangs kann sich das Gerät erwärmen. Stellen Sie
das Gerät während des Ladevorgangs an einem gut belüfteten Ort auf und decken Sie es nicht ab.
Das Gerät ist nicht für den Betrieb in Räumen mit hoher Temperatur oder
Luftfeuchtigkeit (z.B. Badezimmer) oder übermäßigen Staub aufkommen ausgelegt.
Schützen Sie das Gerät vor Feuchtigkeit und dem Eindringen von Flüssig-
keiten. Tauchen Sie das Gerät niemals unter Wasser und stellen Sie keine mit Flüssigkeit gefüllten Gegenstände (z.B. Vasen) neben das Gerät.
22 │ DE
│AT│
CH
SKBL 56 A1
Schalten Sie das Gerät unverzüglich aus und entfernen Sie alle Kabelver-
bindungen vom Gerät, falls Sie ungewöhnliche Geräusche, Brandgeruch oder Rauchentwicklung feststellen. Lassen Sie das Gerät durch einen qualifizierten Fachmann überprüfen, bevor Sie es erneut verwenden.
Lassen Sie Reparaturen am Gerät nur von autorisierten Fachbetrieben
oder dem Kundenservice durchführen. Durch unsachgemäße Reparaturen können Gefahren für den Benutzer entstehen. Zudem erlischt der Garantie­anspruch. Das Gerät darf nicht vom Anwender geöffnet werden.
Das Gerät besitzt einen integrierten Lithium-Ionen-Akku. Eine falsche Hand-
habung von Lithium-Ionen-Akkus kann zu Feuer, Explosionen, Auslaufen gefährlicher Stoffe oder anderen Gefahrensituationen führen! Das Gerät darf nicht ins offene Feuer geworfen werden.
Nehmen Sie keine eigenmächtigen Umbauten oder Veränderungen an
dem Gerät vor. Das Gerät darf nicht vom Anwender geöffnet werden.
Beachten Sie die Nutzungseinschränkungen bzw. Nutzungsverbote für
Batteriebetriebene Geräte an Orten mit gesonderter Gefahrenlage, wie z.B. Tankanlagen, Flugzeugen, Krankenhäusern, usw.
Teilebschreibung
(Abbildungen siehe Ausklappseite)
Abbildung A:
Taste
Taste
Taste
3,5 mm-Klinkenbuchse (AUX IN)
Micro-USB Ladebuchse (POWER INPUT)
gummierter Standfuß
Mikrofon
Betriebs-/Lade-LED
Abbildung B:
Ladekabel (USB auf Micro-USB) 3,5 mm-Klinkenkabel Bedienungsanleitung (Symbolbild)
SKBL 56 A1
DE│AT│CH 
 23
Inbetriebnahme
Auspacken
Entnehmen Sie alle Teile und die Bedienungsanleitung aus dem Karton.Entfernen Sie sämtliches Verpackungsmaterial.
Lieferumfang prüfen
(Abbildungen siehe Ausklappseite)
Der Lieferumfang besteht aus folgenden Komponenten:
®
2 x True Wireless Bluetooth2 x Ladekabel (USB auf Micro-USB)3,5 mm-Klinkenkabel (3,5 mm zu 3,5 mm)Diese Bedienungsanleitung
HINWEIS
Prüfen Sie die Lieferung auf Vollständigkeit und auf sichtbare Schäden.Bei einer unvollständigen Lieferung oder Schäden infolge mangel hafter
Verpackung oder durch Transport wenden Sie sich an die Service-Hotline (siehe Kapitel Service).
-Stereo-Lautsprecher SKBL 56 A1
Entsorgung der Verpackung
Die Verpackung schützt das Gerät vor Transportschäden. Die Verpackungs­materialien sind nach umweltverträglichen und entsorgungstechnischen Gesichtspunkten ausgewählt und deshalb recyclebar.
Die Rückführung der Verpackung in den Materialkreislauf spart
Rohstoffe und verringert das Abfallaufkommen. Entsorgen Sie nicht mehr benötigte Verpackungsmaterialien gemäß den örtlich geltenden Vorschriften.
HINWEIS
Heben Sie wenn möglich die Originalverpackung während der Garantie-
zeit des Gerätes auf, um das Gerät im Garantiefall ordnungsgemäß verpacken zu können.
24 │ DE
│AT│
CH
SKBL 56 A1
Lautsprecher laden
ACHTUNG
Laden Sie die Lautsprecher nur in trockenen Innenräumen.
Vor der Nutzung der Lautsprecher müssen die integrierten Akkus vollständig geladen werden.
Stellen Sie sicher, dass die Lautsprecher ausgeschaltet sind. Falls ein
Gerät eingeschaltet ist, leuchtet die Betriebs-/Lade-LED Gerät auszuschalten, halten Sie die Taste gedrückt.
Verbinden Sie die USB-Stecker der Ladekabel
einem USB-Netzteil.
Verbinden Sie die Micro-USB-Stecker der Ladekabel
USB Ladebuchsen (POWER INPUT) der Lautsprecher.
HINWEIS
Die Betriebs-/Lade-LED
Wenn der Akku vollständig geladen ist erlischt die Lade-LED.
SKBL 56 A1
leuchtet während des Ladevorgangs orange.
mit einem PC oder
. Um ein
ca. 2 Sekunden
mit den Micro-
HINWEIS
Die Ladezeit beträgt ca. 3 Stunden bei einem Ladestrom von 500 mA. Bei voll aufgeladenem Akku ist eine Musikwiedergabe von bis zu 4 Stunden bei mittlerer Lautstärke möglich. Die Wiedergabezeit kann je nach Nutzung (Lautstärke) schwanken.
Wenn der Akku erschöpft ist, ertönen mit Abstand von wenigen
Sekunden zwei Signaltöne und die Betriebs-/Lade-LED Sekunden zwei mal orange auf. Das Gerät schaltet sich anschließend automatisch aus.
blinkt alle 15
Bedienung und Betrieb
In diesem Kapitel erhalten Sie wichtige Hinweise zur Bedienung und Betrieb des Gerätes.
Lautsprecher ein-/ausschalten
Halten Sie die Taste
einen Lautsprecher einzuschalten und die Bluetooth aktivieren. Es ertönt ein Signalton und die Betriebs-/Lade-LED blinkt abwechselnd orange und blau.
für ca. 2 Sekunden gedrückt, um
DE│AT│CH 
®
-Funktion zu
 25
Halten Sie die Taste
um einen Lautsprecher auszuschalten und die Bluetooth deaktivieren. Es ertönt ein Signalton. Die Betriebs-/Lade-LED
erneut für ca. 2 Sekunden gedrückt,
®
-Funktion zu erlischt.
HINWEIS
®
Wenn beide Lautsprecher durch Bluetooth
miteinander gekoppelt sind, schaltet sich beide Lautsprecher ab, so bald Sie einen Lautsprecher ausschalten.
Lautsprecher im Mono-Modus betreiben
Im Auslieferungszustand sind die Lautsprecher standardmäßig im Mono­Modus voreingestellt. D. h. Sie können je einen Lautsprecher mit je einem Wiedergabegerät koppeln. Bevor Sie die Lautsprecher verwenden können, müssen Sie sie mit einem kompatiblen Bluetooth
Stellen Sie sicher, dass die Lautsprecher ausgeschaltet sind und das
Bluetooth
Stellen Sie das Bluetooth
®
-Gerät eingeschaltet ist.
®
-Gerät so ein, dass es nach Bluetooth®-
Geräten sucht. Eine detaillierte Beschreibung dazu finden Sie in der Bedienungsanleitung Ihres Bluetooth®-Gerätes.
®
-Gerät koppeln:
Halten Sie die Taste
einen Lautsprecher einzuschalten und die Bluetooth
für ca. 2 Sekunden gedrückt, um
®
-Funktion zu aktivieren. Es ertönt ein Signalton und die Betriebs-/Lade-LED blinkt abwechselnd orange und blau.
HINWEIS
Stellen Sie sicher, dass sich die Lautsprecher maximal 10 Meter vom
Bluetooth
®
-Gerät und voneinander entfernt sind. Es dürfen sich keine
Hindernisse oder elektronische Geräte dazwischen befinden.
Wählen Sie aus der Liste der gefundenen Geräte Ihres Bluetooth
Gerätes den Eintrag SKBL 56 A1, um einen Lautsprecher zu koppeln. Es ertönt ein kurzer Signalton, wenn die Verbindung erfolgreich hergestellt wurde. Die Betriebs-/Lade-LED blinkt je zwei Mal alle 3 Sekunden.
Wenn Sie den zweiten Lautsprecher ebenfalls im Mono-Modus mit ei-
nem anderen Bluetooth
®
-Wiedergabegerät betreiben wollen, führen Sie den oben beschriebenen Vorgang mit dem zweiten Lautsprecher durch. Achten Sie darauf, dass Sie den zweiten Lautsprecher nicht einschalten, bevor Sie den ersten Lautsprecher mit einem Bluetooth®­Wiedergabegerät gekoppelt haben
®
-
26 │ DE
│AT│
CH
SKBL 56 A1
Sie können den Lautsprecher nun verwenden, um sich Ihre Lieblings musik kabellos anzuhören.
HINWEIS
Die Lautsprecher verbinden sich beim nächsten Einschalten automatisch wieder mit dem zuletzt verbundenen Bluetooth
Bluetooth
®
-Gerät sich nicht automatisch wieder mit den Lautsprechern
®
-Gerät. Wenn Ihr
verbindet, müssen Sie die Verbindung manuell herstellen. Eine detail­lierte Beschreibung dazu finden Sie in der Bedienungsanleitung Ihres
Bluetooth
Wenn Sie den Lautsprecher mit einem anderen Bluetooth
verbinden möchten, müssen Sie zuerst das aktuell verbundene
Bluetooth
®
-Gerätes.
®
-Gerät entkoppeln. Halten Sie dazu für ca. 2 Sekunden
®
-Gerät
die Taste und die Taste ( ) des betreffenden Lautsprechers gedrückt, bis ein Signalton ertönt. Alternativ können Sie auch die Verbindung von Ihrem Bluetooth
®
-Gerät aus trennen. Dann
ertönt ebenfalls ein Signalton.
Lautsprecher im Stereo-Modus betreiben
Sie können auch beide Lautsprecher gleichzeitig von einem Bluetooth®­Gerät aus betreiben. Dann wird je Lautsprecher ein Audiokanal wiederge­geben.
Stellen Sie sicher, dass die Lautsprecher ausgeschaltet sind und das
Bluetooth
Stellen Sie das Bluetooth
Geräten sucht. Eine detaillierte Beschreibung dazu finden Sie in der Bedienungsanleitung Ihres Bluetooth®-Gerätes.
Halten Sie die Taste
einen Lautsprecher einzuschalten und die Bluetooth aktivieren. Es ertönt ein Signalton und die Betriebs-/Lade-LED blinkt abwechselnd orange und blau. Falls sich der Lautsprecher automatisch mit einem ihm bekannten Bluetooth®-Wiedergabegerät verbindet, trennen Sie diese Verbindung. Halten Sie dazu für ca. 2 Sekunden die Taste und die Taste ( ) des betreffenden Lautsprechers gedrückt, bis ein Signalton ertönt.
®
-Gerät eingeschaltet ist.
®
-Gerät so ein, dass es nach Bluetooth®-
für ca. 2 Sekunden gedrückt, um
®
-Funktion zu
SKBL 56 A1
DE│AT│CH 
 27
Wiederholen Sie den Vorgang mit dem zweiten Lautsprecher. Warten Sie
einen Moment. Falls sich die Lautsprecher nicht automatisch miteinander koppeln, versetzen Sie einen der Lautsprecher manuell in den Kopplungs­modus. Halten Sie dazu für ca. 2 Sekunden die Taste
und die Taste ( ) des betreffenden Lautsprechers gedrückt, bis ein hoher Signalton ertönt. Warten Sie einen Moment. Sobald sich beide Lautsprecher automatisch miteinander verbunden haben, leuch­ten die Betriebs-/Lade-LEDs
der beiden Lautsprecher kontinuierlich
blau. Ein Signalton ertönt.
Wählen Sie aus der Liste der gefundenen Geräte Ihres Bluetooth
®
Gerätes den Eintrag SKBL 56 A1, um einen Lautsprecher zu koppeln. Es ertönt ein kurzer Signalton, wenn die Verbindung erfolgreich herge­stellt wurde. Bei dem verbundenen Lautsprecher leuchtet die Betriebs-/ Lade-LED
zusätzlich kontinuierlich orange. Dieser Lautsprecher gibt
den linken Stereokanal wieder.
-
HINWEIS
Die Lautsprecher verbinden sich beim nächsten Einschalten automatisch wieder miteinander. Um die Lautsprecher zu trennen, gehen Sie wie nachfolgend beschrieben vor.
Wenn Sie den Lautsprecher mit einem anderen Bluetooth
verbinden möchten, müssen Sie zuerst das aktuell verbundene
Bluetooth
®
-Gerät entkoppeln. Halten Sie dazu für ca. 2 Sekunden
®
-Gerät
die Taste und die Taste ( ) des betreffenden Lautsprechers gedrückt, bis ein Signalton ertönt. Alternativ können Sie auch die Verbindung von Ihrem Bluetooth
®
-Gerät aus trennen.
Dann ertönt ebenfalls ein Signalton.
28 │ DE
│AT│
CH
SKBL 56 A1
Funktion der Tasten für die Musikwiedergabe
Taste Funktion
Kurz Drücken, um die Musik wiederzugeben/anzuhalten.Gedrückt halten bis ein Signalton ertönt, um den Laut-
/
/
sprecher ein oder auszuschalten. Das Gerät muss zur erneuten Verwendung wieder mit Ihrem Bluetooth Gerät gekoppelt werden.
Kurz Drücken, um die Lautstärke zu erhöhen. Bei
Erreichen der maximalen Lautstärke ertönt ein kurzer Signalton.
Drücken und ca. 2 Sekunden halten, um zum nächs-
ten Titel zu wechseln.
Kurz Drücken, um die Lautstärke zu verringern. Bei
Erreichen der minimalen Lautstärke (Stummschaltung) ertönt ein kurzer Signalton.
Drücken und ca. 2 Sekunden halten, um zum Anfang
des aktuellen Titels zu springen. Innerhalb von 2 Sekunden erneut drücken und ca. 2 Sekunden halten, um zum vorherigen Titel zu wechseln.
Taste Funktion
&
/
(
®
-
Diese beiden Tasten für ca. 2 Sekunden gleichzeitig
gedrückt halten, um die Bluetooth zu de- oder aktivieren. Bei aktivierter Bluetooth®-
)
Funktion verbinden sich die beiden Lautsprecher automatisch.
Telefonfunktionen
Wenn Sie als Bluetooth® -Wiedergabegerät ein Smartphone ver-
wenden, wird bei einem eingehenden Telefonat die Wiedergabe der Audiodatei angehalten.
Die Annahme/Beendigung des Telefonats kann über den Lautsprecher
oder über das Smartphone erfolgen. Der Ton wird über den Lautsprecher des Gerätes wiedergegeben.
Sprechen Sie in das Mikrofon
Sie können die Tonquelle jederzeit über Ihr Smartphone wechseln. Beachten
Sie dazu die Bedienungsanleitung Ihres Smartphones.
Nach Beendigung des Telefonats wird die Wiedergabe der Audiodatei
automatisch fortgesetzt.
des Gerätes, um das Telefonat zu führen.
®
-Verbindung
SKBL 56 A1
DE│AT│CH 
 29
Funktionen der Taste
HINWEIS
Je nach verwendetem Smartphone sind evtl. nicht alle genannten
Funktionen bedienbar.
Funktion
Taste
Gespräch annehmen 1 x drücken (bei ankommendem Telefonat). Gespräch beenden 1 x drücken (bei bestehendem Telefonat).
Gespräch ablehnen
Zuletzt gewählte Rufnummer anrufen
für ca. 2 Sekunden gedrückt halten (bei ankom­mendem Telefonat).
2 x drücken.
AUX IN-Betrieb
Sie können auch Musik von einem, per 3,5 mm-Klinkenkabel angeschlos­senen Audiogerät wiedergeben. Im AUX IN-Betrieb ist der Stereobetrieb nicht möglich. Eine vorhandene Bluetooth®-Verbindung wird getrennt.
Stellen Sie sicher, dass beide Lautsprecher ausgeschaltet sind.
Halten Sie die Taste
für ca. 2 Sekunden gedrückt, um einen Lautsprecher einzuschalten. Es ertönt ein Signalton und die Betriebs-/ Lade-LED blinkt abwechselnd orange und blau.
Schließen Sie das Audiogerät mittels 3,5 mm- Klinkenkabel
die 3,5 mm-Klinkenbuchse (AUX IN) Betriebs-/Lade-LED
blinkt im Sekundentakt blau.
des Lautsprechers an. Die
Starten Sie die Wiedergabe am Audiogerät und stellen Sie die Laut-
stärke auf einen moderaten Pegel ein.
Stellen Sie anschließend die gewünschte Lautstärke mit der Taste
bzw. Taste
Drücken Sie die Taste
am Lautsprecher ein.
, wenn Sie den Lautsprecher stumm-
schalten möchten.
HINWEIS
Wenn Sie bei der Wiedergabe von Audiodateien via Bluetooth
das 3,5 mm-Klinkenkabel an einen Lautsprecher anschließen, wechselt der Lautsprecher automatisch zur Wiedergabe des angeschlossenen Gerätes.
an
®
30 │ DE
│AT│
CH
SKBL 56 A1
Automatische Abschaltung
Wenn die 3,5 mm-Klinkenbuchse nicht in Verwendung ist oder keine Wiedergabe via Bluetooth® betrieben wird, schaltet sich der Lautsprecher automatisch nach ca. 10 Minuten ab.
Die Betriebs-/Lade-LED dene Bluetooth
Halten Sie die Taste
erlischt und ein Signalton ertönt. Eine evtl. vorhan-
®
-Verbindung wird getrennt. für ca. 4 Sekunden gedrückt, um einen
Lautsprecher wieder einzuschalten.
HINWEIS
Die automatische Abschaltung funktioniert nicht wenn die Lautsprecher
geladen werden.
Fehlersuche
Wenn Sie die Lautsprecher nicht mit einem kompatiblen Bluetooth® -Gerät koppeln können, gehen Sie bitte folgendermaßen vor:
Stellen Sie sicher, dass am Musikgerät die Bluetooth
aktiviert ist. Bei angeschlossenem 3,5 mm-Klinkenkabel wird die
Bluetooth
®
-Verbindung unterbrochen.
SKBL 56 A1
®
-Verbindung
Stellen Sie sicher, dass der Lautsprecher eingeschaltet ist.Wenn Sie mehrere Musikgeräte verwenden, stellen Sie sicher, dass
eine zuvor hergestellte Verbindung getrennt wurde (siehe Kapitel Funktion der Tasten für die Musikwiedergabe). Es könnte sich noch
ein zuvor gekoppeltes Gerät in Reichweite befinden.
Stellen Sie sicher, dass sich die Lautsprecher maximal 10 Meter vom
Bluetooth
®
-Gerät und voneinander entfernt sind. Es dürfen sich
keine Hindernisse oder elektronische Geräte dazwischen befinden.
Gerät lässt sich nicht einschalten.
Der integrierte Akku ist nicht geladen.
Laden Sie den Akku auf (siehe Kapitel Lautsprecher laden).
Es wird kein Ton wiedergegeben.
Die Lautstärke am Gerät bzw. am Wiedergabegerät ist auf Minimum
eingestellt. Erhöhen Sie die Lautstärke am Gerät bzw. am Wiederga­begerät.
Die Wiedergabe des Wiedergabegerätes ist nicht gestartet. Starten
Sie die Wiedergabe am Wiedergabegerät.
DE│AT│CH 
 31
Die beiden Lautsprecher verbinden sich nicht miteinander.
Die Lautsprecher befinden sich nicht im Kopplungsmodus. Um dies zu
ändern, halten Sie für ca. 2 Sekunden die Taste Taste ( ) eines Lautsprechers gedrückt, bis ein Signalton ertönt. Warten Sie einen Moment, bis sich die Lautsprecher miteinander verbunden haben.
HINWEIS
Wenn Sie mit den vorstehend genannten Schritten das Problem nicht
lösen können, wenden Sie sich an die Service-Hotline (siehe Kapitel Service).
und die
Reinigung
ACHTUNG
Stellen Sie sicher, dass bei der Reinigung keine Feuchtigkeit in das Gerät
eindringt, um eine irreparable Beschädigung des Gerätes zu vermeiden.
Verwenden Sie keine ätzende, scheuernde oder lösungsmittelhaltige
Reinigungsmittel. Diese können die Oberflächen des Gerätes angreifen.
Reinigen Sie das Gerät ausschließlich mit einem leicht feuchten Tuch
und einem milden Spülmittel.
Lagerung bei Nichtbenutzung
Lagern Sie das Gerät an einem trockenen und staubfreien Ort ohne
direkte Sonneneinstrahlung.
Laden Sie den Akku in regelmäßigen Abständen auf, um eine lange
Lebensdauer des Akkus zu gewährleisten.
Entsorgung
Gerät entsorgen
Das nebenstehende Symbol einer durchgestrichenen Mülltonne auf Rädern zeigt an, dass dieses Gerät der Richtlinie 2012/19/EU
unterliegt. Diese Richtlinie besagt, dass Sie dieses Gerät am Ende seiner Nutzungszeit nicht mit dem normalen Haushaltsmüll entsorgen dürfen, sondern in speziell eingerichteten Sammelstellen, Wertstoffhöfen oder Entsorgungsbetrieben abgeben müssen.
32 │ DE
│AT│
CH
SKBL 56 A1
Diese Entsorgung ist für Sie kostenfrei. Schonen Sie die Umwelt und entsorgen Sie fachgerecht.
Weitere Informationen erhalten Sie bei Ihrem lokalen Entsorger oder der Stadt- bzw. Gemeindeverwaltung.
Anhang
Technische Daten
Betriebsspannung, -strom
®
Bluetooth
Unterstützte
Bluetooth
-Spezifikationen Version 4.2 (bis zu 10 m Reichweite)
®
-Profile Ausgangsleistung ca. 2,8 W RMS @ 10 % THD Frequenzgang 20 Hz - 20 kHz Impendanz 4 Ω Integrierter Akku
je Lautsprecher
5 V , 500 mA
über USB-Ladebuchse
A2DP*, AVRCP*, HFP und HSP
*wenn vom Smartphone unterstützt
3,7 V / 500 mAh (Lithium-Ionen)
Betriebszeit ca. 4 h (bei mittlerer Lautstärke) Ladezeit ca. 3 h (bei 500 mA Ladestrom) Betriebstemperatur +15° C bis +35° C Lagertemperatur +5° C bis +40° C Luftfeuchtigkeit
(keine Kondensation)
5 bis 75 %
Maße (B x H x T) ca. 10 x 10 x 5 cm Gewicht ca. 225 g
Hinweise zur EU-Konformitätserklärung
Dieses Gerät entspricht hinsichtlich Übereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten
Vorschriften der R&TTE-Richtlinie 1999/5/EC, 2014/30/EU und der RoHS-Richtlinie 2011/65/EU. Die vollständige EU-Konformitätserklärung ist beim Importeur erhältlich.
der EMV-Richtlinie
SKBL 56 A1
DE│AT│CH 
 33
Garantie der Kompernaß Handels GmbH
Sehr geehrte Kundin, sehr geehrter Kunde, Sie erhalten auf dieses Gerät 3 Jahre Garantie ab Kaufdatum. Im Falle von
Mängeln dieses Produkts stehen Ihnen gegen den Verkäufer des Produkts gesetzliche Rechte zu. Diese gesetzlichen Rechte werden durch unsere im Folgenden dargestellte Garantie nicht eingeschränkt.
Garantiebedingungen
Die Garantiefrist beginnt mit dem Kaufdatum. Bitte bewahren Sie den Original– Kassenbon gut auf. Diese Unterlage wird als Nachweis für den Kauf benötigt.
Tritt innerhalb von drei Jahren ab dem Kaufdatum dieses Produkts ein Material­oder Fabrikationsfehler auf, wird das Produkt von uns – nach unserer Wahl – für Sie kostenlos repariert oder ersetzt.
Diese Garantieleistung setzt voraus, dass innerhalb der Drei-Jahres-Frist das defekte Gerät und der Kaufbeleg (Kassenbon) vorgelegt und schriftlich kurz beschrieben wird, worin der Mangel besteht und wann er aufgetreten ist.
Wenn der Defekt von unserer Garantie gedeckt ist, erhalten Sie das reparierte oder ein neues Produkt zurück. Mit Reparatur oder Austausch des Produkts beginnt kein neuer Garantiezeitraum.
Garantiezeit und gesetzliche Mängelansprüche
Die Garantiezeit wird durch die Gewährleistung nicht verlängert. Dies gilt auch für ersetzte und reparierte Teile. Eventuell schon beim Kauf vorhandene Schäden und Mängel müssen sofort nach dem Auspacken gemeldet werden. Nach Ablauf der Garantiezeit anfallende Reparaturen sind kostenpflichtig.
Garantieumfang
Das Gerät wurde nach strengen Qualitätsrichtlinien sorgfältig produziert und vor Auslieferung gewissenhaft geprüft.
Die Garantieleistung gilt für Material- oder Fabrikationsfehler. Diese Garantie erstreckt sich nicht auf Produktteile, die normaler Abnutzung ausgesetzt sind und daher als Verschleißteile angesehen werden können oder für Beschädigungen an zerbrechlichen Teilen, z. B. Schalter, Akkus, Backformen oder Teile die aus Glas gefertigt sind.
Diese Garantie verfällt, wenn das Produkt beschädigt, nicht sachgemäß benutzt oder gewartet wurde. Für eine sachgemäße Benutzung des Produkts sind alle in der Bedienungsanleitung aufgeführten Anweisungen genau einzuhalten. Verwendungszwecke und Handlungen, von denen in der Bedienungsanleitung abgeraten oder vor denen gewarnt wird, sind unbedingt zu vermeiden.
34 │ DE
│AT│
CH
SKBL 56 A1
Das Produkt ist nur für den privaten und nicht für den gewerblichen Gebrauch bestimmt. Bei missbräuchlicher und unsachgemäßer Behandlung, Gewaltanwendung und bei Eingriffen, die nicht von unserer autorisierten Service-Niederlassung vorgenommen wurden, erlischt die Garantie.
Abwicklung im Garantiefall
Um eine schnelle Bearbeitung ihres Anliegens zu gewährleisten, folgen Sie bitte den folgenden Hinweisen:
Bitte halten Sie für alle Anfragen den Kassenbon und die Artikelnummer
(z. B. IAN 12345) als Nachweis für den Kauf bereit.
Die Artikelnummer entnehmen Sie bitte dem Typenschild, einer Gravur,
auf dem Titelblatt ihrer Anleitung (unten links) oder als Aufkleber auf der Rück- oder Unterseite.
Sollten Funktionsfehler oder sonstige Mängel auftreten, kontaktieren Sie
zunächst die nachfolgend benannte Serviceabteilung telefonisch oder per E-Mail.
Ein als defekt erfasstes Produkt können Sie dann unter Beifügung des
Kaufbelegs (Kassenbon) und der Angabe, worin der Mangel besteht und wann er aufgetreten ist, für Sie portofrei an die Ihnen mitgeteilte Service­Anschrift übersenden.
Auf www.lidl-service.com können Sie diese und viele weitere Handbücher, Produktvideos und Software herunterladen.
Service
Service Deutschland
Tel.: 0800 5435 111 (Kostenfrei aus dem dt. Festnetz/Mobilfunknetz) E-Mail: kompernass@lidl.de
Service Österreich
Tel.: 0820 201 222 (0,15 EUR/Min.) E-Mail: kompernass@lidl.at
Service Schweiz
Tel.: 0842 665566 (0,08 CHF/Min., Mobilfunk max. 0,40 CHF/Min.) E-Mail: kompernass@lidl.ch
IAN 282774
SKBL 56 A1
DE│AT│CH 
 35
Importeur
Bitte beachten Sie, dass die folgende Anschrift keine Serviceanschrift ist. Kontaktieren Sie zunächst die benannte Servicestelle.
KOMPERNASS HANDELS GMBH BURGSTRASSE 21 DE - 44867 BOCHUM DEUTSCHLAND www.kompernass.com
36 │ DE
│AT│
CH
SKBL 56 A1
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21 DE - 44867 BOCHUM GERMANY www.kompernass.com
Last Information Update · Stand der Informationen: 12 / 2016 · Ident.-No.: SKBL56A1-102016-2
6
Loading...