Warranty and Service Information ........................................................... 75
English - 5
SilverCrest SCW 5 A2
Trademarks
Apple® is a registered trademark, App Store is a service mark of Apple Inc., registered in the
USA and other countries.
®
Google
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing, LLC in the USA and other countries.
Microsoft Windows is a registered trademark of Microsoft Corporation, USA.
SD and SDHC are registered trademarks.
USB is a registered trademark.
Other names and products can be the trademarks or registered trademarks of their
respective owners.
is a registered trademark of Google Inc.
Introduction
Thank you for purchasing this SilverCrest SCW 5 A2 action camcorder. The action
camcorder is the ideal companion for your sports activities. Its extensive accessories allow
you to use the action camcorder for the most different scenarios. It allows you to capture
wonderful memories at any time.
Intended use
Your camcorder is a Consumer Electronics device and is designed exclusively for recording
movies and pictures. Any use other than that mentioned above does not correspond to the
intended use. The device may only be used for private purposes, not for industrial or
commercial ones.
This device fulfills all standards and directives listed in the Declaration of Conformity. If any
changes are made to the equipment other than those endorsed by the manufacturer,
compliance with these standards and directives can no longer be guaranteed. Only use
accessories recommended by the manufacturer.
Observe the regulations and laws in the country of use.
6 - English
SilverCrest SCW 5 A2
Package contents
Remove the camcorder and all accessories from the package and verify that you have
received all items listed. Remove all package material. If you find anything missing or
damaged, please contact the Customer Service.
SilverCrest SCW 5 A1
action camcorder
4 GB microSD card (incl. SD card adapter) USB cable
HDMI cable Water-resistant case (incl. adapter)
FJ-SLB-10A battery
English - 7
SilverCrest SCW 5 A2
Lens cover Water-resistant back cover (incl. adapter)
(mounted on the water-resistant case)
(orange seal)
Open back cover
(yellow seal)
Swivel holder Adapter for other mounting systems
Bike holder
8 - English
SilverCrest SCW 5 A2
CD-ROM with software (lineart illustration) User manual (lineart illustration)
Flat adhesive socket Curved adhesive socket
Velcro with latch Velcro without latch
3 x adhesive pads for replacement 6 x anti-mist pads
There is a separate "GNU General Public License" flyer included with the
product. You can also download this flyer at www.lidl-service.com
English - 9
SilverCrest SCW 5 A2
Technical specifications
Capture sensor 5-megapixel CMOS sensor
Lens Wide-angle, F2.8, f=2.5mm
Display OLED status indicator
Internal memory 128MB (approx. 89,9MB free / partially used by firmware)
External memory microSD/SDHC (up to 64GB)
Memory card: 4 GB microSD / Speed Class 4
Operating modes Video recording, picture recording
Video Format: H.264 (MP4)
Resolution: 1080p – 1920 x 1080 (30 fps)
960p – 1280 x 960 (30 fps)
720p – 1280 x 720 (60 fps)
Photo Format: JPEG
Resolution: 5 megapixel
Power supply 5V , 0.5A for power supply via PC USB port
5V , 1.0A for power supply via external power adapter
Battery charging time approx. 3.0 hours for power supply via PC USB port
approx. 2.5 hours (for power supply via external power
adapter)
Runtime with fully
charged battery
Battery Li-Ion battery FJ-SLB-10A / 3.7V, 1130mAh
Connectors and sockets USB 2.0
10 - English
approx. 1.5 to 2.0 hours
Manufacturer: FUJI ELECTRONICS(SHENZHEN) CO.,LTD
HDMI
MIC IN (2.5mm jack)
SilverCrest SCW 5 A2
Microphone built-in
Built-in wireless receiver Modulation: GFSK
Frequency: 2403MHz to 2477MHz
Data transfer speed: 250kbps / 1Mbps / 2Mbps
Number of channels: 75
WiFi standards 802.11 b, 802.11 g, 802.11 n
Operating temperature * 0 °C to +35 °C
Storage temperature * 0 °C to +45°C
Relative humidity max. 85 % rel. humidity
Dimensions (W x H x D) approx. 60 x 43 x 43 mm
Weight (incl.
approx. 80 g
rechargeable battery)
* Temperatures below 0°C may reduce the battery capacity and/or lifetime. Please have
this in mind when practicing winter sport activities, as the maximum runtime may be
significantly reduced. If you want to use your camcorder at temperatures below 0°C you
should install it in the water-resistant case with the water-resistant back cover. This guarantees
that the heat released from the camcorder operation also heats up the battery. When not
using the camcorder you should store the battery in your pocket, for example.
The technical specifications and design can be changed without prior notice.
English - 11
SilverCrest SCW 5 A2
Safety instructions
Before you use this device for the first time, please read the following notes and heed all
warnings, even if you are familiar with handling electronic devices. Keep these operating
instructions in a safe place for future reference. If you sell the device or pass it on, it is
essential that you also hand over this manual, as it is part of the product.
DANGER! This symbol and the word “Danger” alert you to a
potentially dangerous situation. Ignoring it can lead to severe injury or
even death.
WARNING! This symbol and the word “Warning” denote important
information required for the safe operation of the product and for the
safety of its users.
This symbol denotes further information on the topic.
To power the camcorder use the supplied battery pack only
(manufacturer: FUJI ELECTRONICS(SHENZHEN) CO.,LTD / model: FJSLB-10A).
DANGER! Always make sure that
the device is not exposed to direct heat sources (e.g. radiators);
no direct sunlight or bright artificial light reaches the device;
the camcorder is used within the allowed operating temperature range from 0°C to 35°C
only;
contact with spray, dripping water and corrosive liquids is avoided and the device is never
operated near water; in particular the device may never be immersed in liquids (do not
place any objects containing liquids, such as vases or drinks, on or near the device);
12 - English
SilverCrest SCW 5 A2
Dripping and sprayed water and immersing the device is allowed only after the camcorder
has been fitted into the protective water-resistant case;
the device is never placed near magnetic fields (e.g. speakers);
no naked flames (e.g. burning candles) are placed on or near the device;
no foreign bodies can penetrate into the device;
the device is not exposed to any extreme temperature fluctuations as this can cause
moisture through condensation and cause short-circuits; if the device has been exposed to
strong temperature variations, wait for it to reach the ambient temperature before switching
it on (about 2 hours);
the device should not be subject to excessive shocks and vibrations;
the device and its accessories are not damaged in order to avoid any further risks.
Therefore you must inspect the device and its accessories regularly for any damage. If you
find any component damaged, it must not be used. Never open the camcorder housing
and have all repairs performed by qualified technical staff only.
Failure to heed the warnings above may result in damage to the device or injury.
WARNING!Recordings (photo/video) of
persons and the right on the own image
Please note that when recording any persons, whether portraits or groups of persons, every
person has the right on her/his own image/recording. Recording underaged people is
subject to the consent of the parents. In order to avoid any legal measures, make sure to
respect the legislation of the country of use.
WARNING!Using on the road
Please note that using the camera on the road, whether driving a car, riding a bicycle or as a
pedestrian may distract you from the traffic resulting in severe accidents. This may harm your
health and/or result in legal actions. Therefore the camera may only be operated while the
vehicle is not running.
In some countries it can even be forbidden to use it in a car and result in legal actions.
Please make sure to respect the legislation of the country of use.
English - 13
SilverCrest SCW 5 A2
DANGER!Children and persons with disabilities
Electrical devices are not suitable for children. Also persons with reduced physical, sensory
or mental capabilities should only use electrical devices in appropriate circumstances. Do not
allow children or persons with disabilities to use electrical devices unsupervised, unless they
are instructed accordingly and supervised by a competent person responsible for their
safety. Children should always be supervised to ensure that they do not play with the
product. Small parts can represent choking hazards. Keep the packaging away from
children and persons with disabilities.
DANGER! There is a risk of suffocation!
DANGER!Battery
Always insert the battery pack with the correct polarity. The correct polarity is labelled on the
battery and inside the battery compartment. Never throw a battery into fire. Remove the
battery pack if you do not plan to use the camcorder for a while. Improper use could cause
explosions or leaks.
Batteries must never be opened or deformed. Otherwise any leaking battery fluids may
cause injuries. If the battery fluid becomes in contact with the skin or eyes, rinse immediately
with plenty of water and seek medical aid.
Only operate this device with the battery pack supplied in order to avoid overheating,
deformation of the casing, fire, electric shocks, explosion and other hazards.
Batteries must be disposed of at specific collection points.
14 - English
SilverCrest SCW 5 A2
DANGER! risk of explosion!
Improper use of the battery pack may cause explosions or leaks. Never replace the battery
in an explosion-sensitive environment. While inserting or removing the battery a spark may
be produced that could cause an explosion. Please head the usage restrictions of
prohibitions regarding battery-powered devices at dangerous places like fuel storage areas.
Explosion-sensitive areas are normally (but not always) labelled. These include fuel storage
areas such as below deck on a boat, fuel line or tank areas, environments where the air
contains inflammable substances (e.g. cereals dust or metal powder) and any areas where
you should normally switch off your car engine.
Respect the environment. Old batteries must not be disposed of with domestic waste. They
must be handed in at a collection point for waste batteries.
WARNING!Cables
Always hold cables by the plug and never pull on the cable itself. Never place heavy
objects or furniture on the cables and take care that the cord does not become trapped,
especially at the plug and sockets. Never tie knots in a cable and do not tie them to other
cables. All cables must be laid so that nobody can trip over them or be obstructed by them.
English - 15
SilverCrest SCW 5 A2
WARNING!Water-resistance
The camcorder itself is not water-resistant. It can only be used under water in combination
with its water-resistant case. The water-resistant case is water-resistant up to a depth of 60 m.
To guarantee its water resistance, do not use the camcorder with the water-resistant case for
longer than 60 minutes under water at a time.
The water resistance of this camcorder applies to salt and fresh water only. It does not apply
to any cleaners, chemicals, solvents or water in public swimming pools. Liquids of this kind
must be wiped off the water-resistant case immediately. Only use the water-resistant case in
water of temperatures between 0° C and 35°C. Avoid excessive vibration or shaking under
water. Otherwise there is a risk that the water-resistant case opens. This can damage the
camcorder and any recordings.
WARNING!Maintenance / cleaning
Maintenance
Repairs are required when the device or its housing has been damaged in any way, for
example, when liquids or objects have entered the product, when the product does not work
normally or when the product has been dropped. If smoke, unusual noises or smells are
noticed, power off the device immediately and remove the battery. If this occurs, do not
continue to use the device and have it checked out by an expert. All repairs must be carried
out by qualified service personnel.
Cleaning
Use a soft, lint-free cloth for cleaning.
Do not use any cleaners, detergents or solvents, as these may enter the housing and cause
permanent damage to the product.
16 - English
SilverCrest SCW 5 A2
Please read the notes on “Cleaning after using under water” on page 65.
Copyright
All the contents of this user manual are protected by copyright and provided to the reader
for information only. Copying data and information without the prior explicit written consent
of the author is strictly forbidden. This also applies to any commercial use of the contents and
information. All texts and diagrams are up-to-date as of the date of printing.
English - 17
SilverCrest SCW 5 A2
Overview
An additional illustration of the items and controls and their corresponding numbers can be
found on the inner page of the fold-out cover of this user manual. You can keep this page
folded out whilst reading the different chapters of this user manual. This allows you to refer to
the relevant controls at any time.
1Display
2On/Off/Mode button
3Status LED
4Speaker
5Lens
6Status LED
7microSD card slot
8HDMI output
9Record button
10Battery compartment
11Status LED
12Microphone
13USB/charging connector
14Microphone connector
15Status LED
18 - English
SilverCrest SCW 5 A2
Before you start
Inserting/removing a memory card
You should insert a microSD memory card to record your videos and pictures. If there is no
microSD memory card inserted, all recordings will be stored on the internal camcorder
memory. As the internal memory is very small, only a few recordings may be stored. Insert
the supplied microSD in order to be able to store more recordings. Proceed as follows:
Power the camcorder off before you insert or remove a memory card.
Insert the memory card with the contacts facing towards the front of the device (towards
the lens [5]) into the microSD card slot [7] until it clicks in place. To remove the memory
card, gently press on the inserted card. The memory card will protrude a little so that you
can get a hold of it and remove it.
Only use Speed Class 4 or faster memory cards. Otherwise image
and/or sound distortion may occur during video recording.
If the memory card or the internal memory is full, the message “FULL”
appears on the bottom line of the display [1].
English - 19
SilverCrest SCW 5 A2
p
p
Inserting the battery pack
Insert the battery pack as follows into the camcorder:
Open the battery compartment [10]. To do so, press on the ribbed area of the battery
compartment cover and slide it into the direction of the arrow until the closed arrow on the
cover and the opened arrow on the camera housing are aligned. Next lift the battery
com
artment cover to remove it.
Align the contacts of the battery pack with the contacts in the battery compartment [10].
Make sure that the [+] and [-] contact markings on the battery and in the compartment
[10] match. Next fully insert the battery pack into the battery compartment [10]. Make
sure to
lace the end of the strip over the battery pack.
20 - English
SilverCrest SCW 5 A2
Close the battery compartment [10]. To do so, press on the ribbed area of the battery
compartment cover and slide it into the direction of the arrow until the closed arrow on the
cover and the closed arrow on the camera housing are aligned.
To remove the battery pack, open the battery compartment [10] as
described above. Pull the strip to remove the battery.
On delivery, the battery pack is not charged. Please fully charge the
battery before using the product for the first time.
English - 21
SilverCrest SCW 5 A2
Buttons
Button Function
On/Off/Mode button [2] Press and hold this button for at least 3 seconds to
switch the camcorder on or off.
Press this button several times while the camcorder is
switched on to toggle between the different operating
modes (Video, Photo, WiFi, Burst, Time-lapse, Selftimer and Menu).
Press this button while the menu is shown to navigate
through the menu items.
Record button [9] Press this button in Video mode to start or stop
recording.
Press this button in Photo mode to take a picture.
Press this button while the menu is shown to select a
menu item.
LEDs
The status LEDs can be found on the top, bottom, front and back panels of the camcorder.
They allow you to monitor the camcorder status under the most different mounting scenarios.
LED Colour Description
Operation: Powering on or photo capture.
USB Mode: Charging battery
Operation: Self-timer enabled
Operation: Recording video or self-timer
enabled
USB Mode: Charging battery
Status LED [3]
Status LED
[3, 11 and 15]
Status LED [6]
Green
Slowly flashing green Operation: WiFi is enabled
Fast flashing green USB Mode: Camcorder powered on
Flashing red Operation: Video recording in progress
Flashing green/orange
or red
Flashing orange
Off USB Mode: Battery is fully charged
22 - English
SilverCrest SCW 5 A2
Charging the Battery
It is possible to recharge the camcorder battery pack via the USB power of a computer. To
do this, you will need the USB cable supplied.
Insert the battery pack as described above into the camcorder.
Use the USB cable to connect the camcorder to an available USB port on a computer. Insert
the small plug of the supplied USB cable into the USB/charge port of your camcorder [13]
and the large plug into a USB port on your computer.
You can keep the camcorder powered off while charging. Press and hold the On/Off/Mode
button [2] for three seconds to switch the camcorder off.
The status LED [6] flashes orange during charging. When the charging process is complete,
the status LED [6] goes out.
Some computers do not supply USB power while they are turned off. If
the camcorder does not charge, make sure your computer is switched on.
English - 23
SilverCrest SCW 5 A2
In addition to the option above, you can also connect the camcorder to
an external USB power adapter (not supplied) in order to charge the
battery pack. To do this, you will need the USB cable supplied. You can
purchase a suitable 5V USB power adapter with at least 1A from any
electronics retail outlet.
When using an external power adapter, it must be connected to an
easily accessible wall outlet in order to be able to disconnect it quickly in
case of an emergency.
Setting the date and time
To set the date and time:
Press and hold the On/Off/Mode button [2] for at least 3 seconds to switch the
camcorder on. The camcorder initialises in Video mode automatically.
To open the menu, press the On/Off/Mode button [2] six times.
If the display is in dimmed power-saving mode, press the On/Off/Mode
button [2] once to toggle to active mode.
Press the record button [9] to open the menu. The following menu is shown:
24 - English
SilverCrest SCW 5 A2
The SETUP menu will be highlighted. Press the On/Off/Mode button [2] multiple times
to select the MORE menu and then press the record button [9] to confirm.
Press the On/Off/Mode button [2] multiple times until the TIME menu is highlighted.
Press the record button [9] to open the TIME menu.
Next you can set the year, month, day, hours and minutes in sequence. Select the
variable that you want to set by pressing the On/Off/Mode button [2]. Press the record
button [9] to increase the value stepwise.
After all settings have been entered, press the On/Off/Mode button [2] to select “OK”.
Press the record button [9] to confirm.
To exit the MORE menu, press the On/Off/Mode button [2] multiple times until the EXIT
item is highlighted and then press the record button [9] to confirm.
Next you can use the On/Off/Mode button [2] to select an operating mode.
English - 25
SilverCrest SCW 5 A2
Getting started
Powering the camcorder on/off
Press and hold the On/Off/Mode button [2] for at least 3 seconds to switch the camcorder
on or off. While powering on the status LED [3] goes green.
The display
The display [1] shows the following information:
25
24
No. Icon* Description
21
22
23
Number of recordings saved (pictures and videos)
Battery capacity
Alternates between the following:
Displays the field of view of the camera: WIDE or ULTRA
Shows the remaining storage space in percentage.
Displays the option that is executed when pressing the record
button [9].
24
When this icon is shown, pressing the record button [9] starts a
video recording.
When this icon is shown, pressing the record button [9]
captures a picture.
26 - English
23
21
22
No. Icon* Description
Shows the operating mode currently selected.
Video mode: Use this mode for video recording. This icon also
resumes the current video recording settings.
SilverCrest SCW 5 A2
Photo mode: Use this mode for taking pictures.
WiFi Mode: In this operating mode you can enable or disable
the WiFi function. While WiFi is enabled, you can control the
camcorder from the SilverCrest Action Camcorder App.
Burst mode: Use this mode to take a series of 10 pictures.
25
Time-lapse mode: Use this mode for time-lapse picture or video
recording. This icon also resumes the current settings.
Self-timer: Use this mode for self-timer shots.
Setup: Use this mode to customise the camcorder settings.
* The icons may vary depending on the selected setting.
English - 27
SilverCrest SCW 5 A2
Selecting the operating mode
Press the On/Off/Mode button [2] several times to toggle between the different operating
modes. The currently selected mode is indicated on the top-left corner of the display [1]. The
modes are cycled as follows:
Video mode Photo mode WiFi Mode
Burst mode
Setup Self-timer Time-lapse mode
If the display is in dimmed power-saving mode, press the On/Off/Mode
button [2] once to toggle to active mode.
Recording
Recording videos
Press and hold the On/Off/Mode button [2] for at least 3 seconds to switch the
camcorder on. The camcorder initialises in Video mode automatically.
28 - English
Loading...
+ 202 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.