Shure ULXD14-G50, ULXD14/85-G50, ULXD14/85-H50, ULXD14/93-G50, ULXD14/93-H50 User Manual

ULX-D®

DIGITAL WIRELESS SYSTEMS

Shure ULX-D® Digital Wireless offers uncompromising 24-bit audio clarity and extremely efficient RF performance with single, dual, and quad channel receivers for any size professional sound reinforcement application. Generations ahead of any other available system in its class, ULX-D brings a new level of performance to professional sound reinforcement.

UNCOMPROMISING PROFESSIONAL DIGITAL WIRELESS

24-bit/48 kHz digital audio that delivers incredibly clear and accurate sound reproduction 20 Hz – 20 kHz frequency range with flat response

Greater than 120 dB dynamic range

Wide selection of trusted Shure Microphones

Available in UHF, VHF and ISM (900MHz) Frequency Bands (region dependent)

EXTREMELY EFFICIENT AND RELIABLE RF PERFORMANCE

Up to 64 MHz overall tuning range (region dependent)

Up to 17 active transmitters in one 6 MHz TV channel (22 on an 8 MHz TV channel) High Density mode enables up to 47 active transmitters in one 6 MHz TV channel Rock-solid signal stability with no audio artifacts over the entire 100 meter range

Optimized scanning automatically finds, prioritizes, and selects the cleanest frequencies available

SCALABLE, INTELLIGENT HARDWARE

Single (half-rack), Dual and Quad (full-rack) receiver form factors AES 256-bit encryption equipped for secure wireless transmission Dante™ digital networked audio over Ethernet

Wireless Workbench® 6 compatible for advanced coordination, monitoring and control; features Site Survey tool for scanning frequencies in the 902-928 MHz ISM band

Compatible with the Shure SB900A Rechargeable Battery and SBC chargers

APPLICATIONS

Installed Audio

Critical Audio Performances

High channel counts

Secure presentations

PRODUCT HIGHLIGHTS

24-bit/48 kHz Digital Wireless Audio

High Density Mode

Single, Dual, and Quad Channel Receivers

Advanced Rechargeability

Dante™ Networked Audio over Ethernet

Boundary and Gooseneck Base Transmitters are available in black and white color options

ULX-D® DIGITAL WIRELESS SYSTEMS

SPECIFICATIONS (SUBJECT TO CHANGE)

	RF Carrier Range	174–216 MHz, 470–865 MHz, 1492–1525 MHz, 1785–1805 MHz
		Note: Varies by region (See Frequency Range and Ouput Power table)
	Working Range	100 m (328 ft)
		Note: Actual range depends on RF signal absorption, reflection and interference.
	RF Tuning Step Size	25 kHz, varies by region
	Image Rejection	>70 dB, typical
	RF Sensitivity	-98dBm at 10-5 BER
	Latency	<2.9 ms
	Audio Frequency Response	ULXD1: 20 Hz – 20 kHz (±1 dB) ULXD2: 30 Hz – 20 kHz (±1 dB)
		Note: Dependent on microphone type
	Audio Dynamic Range System Gain @ +10	XLR Analog Output: >120 dB, A-weighted
		Dante Digital Output (Dual and Quad receivers): 130 dB (typical), A-weighted
	Total Harmonic Distortion	<0.1%
	−12 dBFS input, System Gain @ +10
	System Audio Polarity	Positive pressure on microphone diaphragm produces positive voltage on pin 2
		(with respect to pin 3 of XLR output) and the tip of the 6.35 mm (1/4-inch) output.
	Operating Temperature Range	−18 °C (0 °F) to 50 °C (122 °F)	Note: Battery characteristics may limit this range.
	Storage Temperature Range	−29°C (−20°F) to 74°C (165°F) Note: Battery characteristics may limit this range.
	FREQUENCY RANGE
	Band	Range (MHz)	Transmitter Output (mW)
	V50	174 to 216	1/10/20
	V51	174 to 216	1/10/20
	G50	470 to 534	1/10/20
	G51	470 to 534	1/10/20
	G52	479 to 534	1/10
	H50	534 to 598	1/10/20
	H51	534 to 598	1/10/20
	H52	534 to 565	1/10
	J50	572 to 636	1/10/20
	K51	606 to 670	1/10
	L50	632 to 696	1/10/20
	L51	632 to 696	1/10/20
	P51	710 to 782	1/10/20
	R51	800 to 810	1/10/20
	JB (Tx only)	806 to 810	1/10
	AB (Rx and Tx)	770 to 810	“A” band (770.250-805.750): 1/10/20
			“B” band (806.125-809.750): 1/10
	Q51	794 to 806	1/10/20
	X52	902 to 928	1/10/20
	X50	925 to 932	1/10
	X51	925 to 937.5	1/10
	X52	902 to 928	0.25/10/20
	X53	902 to 907.5; 915 to 928	0.25/10/20
	X54	915 to 928	0.25/10/20
	Z16	1240 to 1260	1/10/20

*Note: Not all frequencies available in all regions. Contact your authorized Shure dealer for availability.

www.shure.com

NOTE:

This Radio equipment is intended for use in musical professional entertainment and similar applications. This Radio apparatus may be capable of operating on some frequencies not authorized in your region. Please contact your national authority to obtain information on authorized frequencies and RF power levels for wireless microphone products.

RECHARGEABLE POWER

MANAGEMENT (sold separately)

SB900A

RECHARGEABLE BATTERY

ULX-D transmitters are compatible with the SB900A lithium-ion rechargeable battery, which provides over

9 hours of continuous use and precise tracking of remaining life and charge cycle details.

SBC200 DUAL DOCKING

RECHARGING STATION

This compact and portable unit charges batteries while in transmitters or out. Up to 4 SBC200‘s can be chained toget.her to run off one power supply.

SBC220 2-BAY NETWORKED CHARGING STATION

Enables docked charging and storage for any combination of two SB900A batteries or ULXD1, ULXD2 wireless transmitters. When connected to a network, the charging status of each transmitter can be viewed remotely. Up to four SBC220 units can be linked together to share power and network connectivity.

SBC800 EIGHT BATTERY

RECHARGING STATION

This compact and portable unit charges up to 8 SB900A batteries to full capacity within 3 hours, with status LEDs to indicate power levels. SB900A batteries fit securely in the charger for easy, efficient storage and transport.

BATTERY RUNTIMES

(Note: Frequency Band Dependent)

BATTERY
TYPE	1 MW	10 MW	20 MW
SB900A	> 9 hours	> 9 hours	> 7 hours
Alkaline	> 8 hours	> 8 hours	< 6 hours
NiMH	> 8 hours	> 8 hours	< 6 hours
Li-primary	10-16 hours	10-16 hours	7-9 hours

© 2019 Shure Incorporated

ULXD4 DIGITAL WIRELESS RECEIVER

OVERVIEW

The Shure ULXD4 is a half-rack wireless receiver for use with ULX-D® Digital Wireless Systems. With an expansive set of professional features, including 24-bit/48kHz digital audio quality, efficient and intelligent RF performance, and AES 256-bit encryption, ULX-D offers uncompromising wireless tailored for professional sound reinforcement.

FEATURES

•Up to 64 MHz tuning range

•Predictive switching diversity

•Intelligent scanning automatically finds and deploys the cleanest frequencies to transmitters over IR sync

•Interference detection and alerts provided on both the receiver and WWB6

•Front panel gain adjustment buttons provide up to 60 dB additional gain

•AES 256-bit encryption-enabled for applications where secure transmission is needed

•Ethernet networking for streamlined setup across multiple receivers, WWB6 integration (coming soon), and AMX/Crestron control

•Support for frequency coordination with Axient Spectrum Manager (coming soon)

•Rugged metal chassis

•Intuitive front panel LCD menu and controls

•Easily readableUpgraded LCD with adjustable contrast and brightness

•Audio and RF LED meters with peak indicator

•Front panel lockout

•XLR and ¼" outputs

•Remoteable ½ wave antennas

•Furnished rack hardware

		control	RF audio gain	power
ULXD4			AB
	ENTER		OL
Digital Wireless Receiver			OL
	EXIT
sync	SCAN	push

ULXD4

Front Panel

ULXD4

www.shure.com

12V OUT		line		12V OUT
	15V 0.6A	mic
150 mA				150 mA
antenna . B	power	mic / line	inst / aux	antenna . A

ULXD4

Back Panel

SPECIFICATIONS

(SUBJECT TO CHANGE)

	Dimensions	197 mm × 171 mm × 42 mm
		(7.75 in. × 6.75 in. × 1.65 in.),
		H × W × D
	Weight	913 g (2.0 lbs), without antennas
	Housing	Galvanized Steel
	RF OUTPUT
	Spurious Rejection	>80 dB, typical
	Connector Type	BNC
	Impedance	50 Ω
	Bias Voltage	12 - 13 V DC, 170 mA maximum,
		per antenna
	AUDIO INPUT
	Gain Adjustment	-18 to +42 dB in 1 dB steps (plus
	Range	Mute setting)
	Configuration	1/4" (6.35 mm):
		Impedance balanced (Tip=audio,
		Ring=no audio, Sleeve=ground)
		XLR: Balanced
		(1=ground, 2=audio +, 3=audio -)
	Impedance	1/4" (6.35 mm):
		100 Ω (50 Ω Unbalanced)
		XLR: 100 Ω
	Full Scale Output	1/4" (6.35 mm): +12 dB
		XLR: LINE setting=
		+18 dBV, MIC setting= -12 dBV
	Mic/Line Switch	30 dB pad
	Phantom Power	1/4" (6.35 mm): Yes
	Protection	XLR: Yes
	NETWORKING
	Power Over	No, protected
	Ethernet (PoE)
	Network Interface	Single Port Ethernet 10/100 Mbps
	Network	DHCP or Manual IP address
	Addressing
	Capability
	Maximum Ethernet	100 m (328 ft)
	Cable Length

www.shure.com

© 2019 Shure Incorporated