Schneider Electric SXWSC3XSELXX, SXWSC3PSELXX, SXWSCBPSELXX Specifications
Installation Instructions
TM
SmartX
Living Space Sensor Button and Occupancy Covers
SXWSC3XSELXX (3-Button Cover)
SXWSC3PSELXX (3-Button Cover with Occupancy Sensor)
SXWSCBPSELXX (Blank Cover with Occupancy Sensor)
Product Description
SmartX sensors are a family of living space sensors for use
with SmartX IP controllers that use the EcoStruxure Building
Operation software user interface. These sensors use an RJ-45
sensor bus that provides communication and power from the
SmartX IP controller.
SmartX living space sensors are modular and are ordered in
two parts: the sensor base and the cover. Four SmartX communicating sensor base models are available that can be paired
with any one of six covers.
The SXWSC3XSELXX 3-button cover offers setpoint and
override control. Setpoint and override parameters are congured using EcoStruxure Building Operation software. Status is
provided via LED halo at the bottom of the sensor.
The SXWSCBPSELXX occupancy sensor cover uses a passive
infrared (PIR) motion detector to determine occupancy status.
The system may be congured using EcoStruxure Building
Operation software to override comfort settings to occupied status when occupancy is detected during scheduled unoccupied
periods.
The SXWSC3PSELXX 3-button and occupancy sensor cover
offers both types of functionality.
Features
• Contemporary, sleek housing
• LED halo provides mode status
Applicable Documentation
Title Description
SmartX Living Space Sensor Base Installation instructions for all base variants
SmartX Living Space Sensor Blank Cover Installation instructions for blank cover without occupancy sensor
SmartX Living Space Sensor Touchscreen Cover Installation instructions for touchscreen models with and without occupancy sensors
SmartX Living Space LCD Temperature Sensor LCD temperature sensor base and cover installation instructions
SmartX Living Space Resistive Temperature Sensor Non-communicating temperature sensor installation instructions
© 2018 Schne ider Ele ctric . All ri ghts res erved . All tra demarks are owne d by Schneider Ele ctric I ndustr ies SAS o r its affiliat ed comp anies. March 2018
Schnei der Electric 800 Fed eral Street, An dover, MA 01810 USA Z207551-0C nk
Installation Instructions
Available Products
SmartX Sensor Bases
Model Number Description Temp RH CO2 Cover
SXWSBTXXXSXX Sensor Base, Temperature X Not Included X
SXWSBTHXXSXX Sensor Base, Temperature, Humidity X X Not Included X
SXWSBTXCXSXX Sensor Base, Temperature, CO
SXWSBTHCXSXX Sensor Base, Temperature, Humidity, CO
2 X X Not Included X
2 X X X Not Included X
SmartX Covers for Use with Sensor Bases
Model Number Description
SXWSCDXSELXX Cover Plate, User Interface, Basic X X X
SXWSC3XSELXX* Cover Plate, Pushbutton Override, Setpoint X X
SXWSCBXSELXX Cover Plate, Blank Cover
SXWSCDPSELXX Cover Plate, User Interface, Basic, Occupancy X X X X
SXWSC3PSELXX* Cover Plate, Pushbutton Override, Setpoint, Occupancy X X X
SXWSCBPSELXX* Cover Plate, Blank Cover, Occupancy X
*Covered by hese installation instructions.
61 mm (2.4”)
Color Touchscreen Override Setpoint
SmartX System Bus
(Communicating)
Occupancy Sensor
(PIR)
Specications
3-Button Versions
Setpoint
Override
Buttons (3) Change values -/+ and override
LED halo Heating, cooling or automatic
Occupancy Versions
Occupancy sensor Passive infrared
Lateral detection angle 140°
Horizontal detection
angle
Detection range
Operating Environment
Operating temperature 0 to 50 °C (32 to 122 °F)
Operating humidity
range
Housing material
Mounting location
Input power Supplied by SmartX sensor base
Temperature, Humidity or Fan Speed
(setpoint type and allowable span set in
EcoStruxure Building Operation software)
Overrides unoccupied mode (duration and
comfort parameters congured in
EcoStruxure Building Operation software)
±15°
4-6 m (13-20 ft.) angle dependent
(see detection pattern diagram, page 3)
0 to 95% RH, non-condensing
High impact ABS plastic
Flammability rating UL 94 V-0
Not suitable for wet locations.
For indoor use only.
Regulatory Information
Agency approvals
UL 916
European conformance CE:
EN61000-6-3
EN61000 Series - industrial immunity std.
FCC Part 15 Class B, REACH, RoHS,
Green Premium, RCM (Australia), ICES-003
(Canada), EAC (Russia)
© 2018 Schne ider Ele ctric . All ri ghts res erved . All tra demarks are owne d by Schneider Ele ctric I ndustr ies SAS o r its affiliat ed comp anies. March 2018
Schnei der Electric 800 Fed eral Street, An dover, MA 01810 USA Z207551-0C nk
Loading...