Schneider Electric MP500C Specification Sheet
MP500C
Multi-Signal Control Actuators
for VP220x SmartX PIBCV, DN40-100
Specification Sheet
Product Description
MP500C is an linear electro-mechanical actuator for the control of the VP220 SmartX PIBCV, DN40-100.
MP500C is controlled either by an increase/decrease floating
signal or by a range of modulating control signals between
the span of 0…10V.
Specifications
Supply Voltage 24 Vac +/- 10%, 50…60Hz
Power consumption average 15 VA
Transformer sizing 50 VA
Running time
Modulating
Increase/decrease
Thrust 500N (112 lbf.)
Duty cycle max. 20%/60 minutes
Analog input (Y-M)
Voltage Range
Selectable Input signals
Impedance minimum 100 k Ohm
Digital input (Y2-Y1)
Voltage across open input
Current through closed input
Pulse time
Output U (Position Feedback Signal) 2…10 V
Load 2 mA
Environmental
Operation temperature
Storage temperature
Ambient humidity
Enclosure rating
Sound power level
24 Vdc +/- 15%
15 s
300 s/60 s
0…10 Vdc
2…10 V, 0…5 V, 2…6 V,
5…10 V, 6…10 V
24 Vac
5 mA
minimum 20 ms
–10…+50 °C
–25…+65 °C
max. 90% RH non-con-
densing
IP 54 (NEMA 2)
max. 32 dBA
Features
• Brushless DC motor.
• High resolution control board allows precise fluid control.
• Working range and end point switches calibrate to any
stroke and flow setting of the valve.
• A proportional set running time of 15s regardless of valve
stroke.
• Multi-signal control for either 3 point increase/decrease
signal or various modulating control signals including
sequencing.
• The U-Bolt connection allows quick and easy direct
mounting onto the SmartX PIBCV VP220x valves.
• Stroke Indicators on the yoke provide clear visual
indication to the valves opening position.
Standards
Emission / immunity
Heat
Humidity
Cold
Vibration
Material: Housing
Cover
Color
Weight
EMC 2004/108/CE accord-
ing to 61326-1:2006
IEC-68-2-2
IEC-68-2-3
IEC-68-2-1
IEC-68-2-6
Aluminium
ABS/PC plastic
aluminium/grey
1.8 kg (3.96 lb.)
Part Numbers & Accessories
Part No. Explanation
MP500C Forta Multi-signal control actuator
880-0104-000 S2 (Aux Switch)
Agency Listings
UL873: Underwriters Laboratories (File #E9429 Category
Temperature Indicating and Regulating Equipment)
CUL: Listed for use in Canada by Underwriters Laboratory.
Canadian Standards C22.2 No. 24.
European Community: EMC Directive: (2004/108/EC).
Australia: This product meets requirements to bear the RCM
Mark according to the terms specified by the Communications Authority under the Radio Communications Act of 1992.
© 2016 Schneider Electric. All rights reserved. All trademarks are owned by Schneider Electric Industries SAS or its affiliated companies. October, 2016 tc
Document Number: F-27944-1
Loading...