Samsung WF1704W5A, WF1702W5A, WF1700W5A, WF1604W5A, WF1602W5A User manual

WF1704W5(A/C/D/F/G/H/R/S/T/V/W/Z)

WF1702W5(A/C/D/F/G/H/R/S/T/V/W/Z)

WF1700W5(A/C/D/F/G/H/R/S/T/V/W/Z)

WF1604W5(A/C/D/F/G/H/R/S/T/V/W/Z)

WF1602W5(A/C/D/F/G/H/R/S/T/V/W/Z)

WF1600W5(A/C/D/F/G/H/R/S/T/V/W/Z)

Washing Machine

user manual

This manual is made with 100% recycled paper.

imagine the possibilities

Thank you for purchasing this Samsung product.

WF1702W5-03013M-04_EN.indd 1		2014/7/4 9:39:46

features of your new samsung washing machine

Your new washing machine will change the way you feel about doing laundry. From its super-size capacity to its energy efficiency, the Samsung washing machine has all the features to turn a mundane chore into a pleasure.

• Eco Bubble Wash

Samsung’s effective Eco Bubble delivers improved cleanliness with advanced fabric care. Eco Bubble allows detergent to distribute evenly and penetrate fabrics faster and deeper.

• Outdoor Care

Using a Samsung washing machine with Eco Bubble allows you to wash waterproof clothing with greater comfort, in the knowledge that your washer provides excellent care for your outdoor clothes. The Foam Cushion created by Eco Bubble protects against impact and abrasion damage to the water proofing layer, minimizing damage to outdoor clothing, and also protecting other forms of delicate fabrics.

• Baby Care

Your Samsung washing machine includes wash programs that add protection to the clothing of children with sensitive skin.

These programs reduce skin irritation in children by minimizing detergent residue. In addition, these programs classify laundry into various types and the wash is performed according to the laundry characteristics so that children’s clothes feel refreshingly clean whenever they are put on.

• Hand Wash

Special care can be determined by the appropriate temperature, the gentle wash action and the appropriate amount of water.

2_ features

WF1702W5-03013M-04_EN.indd 2		2014/7/4 9:39:46

• Quick Wash

No time to waste! Our 15 minute Quick Wash will allow you to Wash and Run.Our Quick Wash programme can help with your busy life - now you can wash your favourite clothes (up to 2Kg) in just 15 minutes!

• Child Lock

The Child Lock function ensures that curious little hands are kept out of your washing machine.

This safety feature stops your children from playing with the operation of the washing machine, and alerts you when it is activated.

• Delay End

Delay a cycle for up to 19 hours in one-hour increments and increase the convenience of using your washing machine especially when you have to go out.

• Wide door

Extra wide door aperture for convenient viewing! Easily add and remove laundry, especially for large sized laundry items such as bedding, towels etc.

• Ceramic Heater for Durability & Energy Saving (selected models)

Our truly innovative Ceramic Heater is twice as durable as regular heaters.

That saves you money on repairs. Plus, it eliminates the scale of hard water and save energy.

This manual contains important information on the installation, use, and care of your new Samsung washing machine. Refer to it for descriptions of the control panel, instructions on how to use the washing machine, and tips for making the most of its state-of-the-art features and functions. The “Troubleshooting and information codes” section on page 33 tells you what to do if something goes wrong with your new washing machine.

features _3

WF1702W5-03013M-04_EN.indd 3		2014/7/4 9:39:46

safety information

Congratulations on your new Samsung ActivFresh™ washer. This manual contains important information on the installation, use and care of your appliance. Please take time to read this manual to take full advantage of your washer’s many benefits and features.

What you need to know about safety instructions

Please read this manual thoroughly to ensure that you know how to safely and efficiently operate the extensive features and functions of your new appliance and retain it at a safe place near the appliance for your future reference. Use this appliance only for its intended purpose as described in this instruction manual.

Warnings and Important Safety Instructions in this manual do not cover all possible conditions and situations that may occur. It is your responsibility to use common sense, caution, and care when installing, maintaining, and operating your washer.

Because these following operating instructions cover various models, the characteristics of your washer may differ slightly from those described in this manual and not all warning signs may be applicable. If you have any questions or concerns, contact your nearest service center or find help and information online at www.samsung.com.

Important safety symbols and precautions

What the icons and signs in this user manual mean:

					Hazards or unsafe practices that may result in severe personal injury,
WARNING					death and/or property damage.
					Hazards or unsafe practices that may result in personal injury and/or
CAUTION					property damage.
					To reduce the risk of fire, explosion, electric shock, or personal injury
CAUTION					when using your washer, follow these basic safety precautions:
					Do NOT attempt.
					Do NOT disassemble.
					Do NOT touch.
					Follow directions explicitly.
					Unplug the power plug from the wall socket.
					Make sure the machine is grounded to prevent electric shock.
					Call the service centre for help.
					Note

These warning signs are here to prevent injury to you and others. Please follow them explicitly.

After reading this section, keep it in a safe place for future reference.

Read all instructions before using the appliance.

As with any equipment using electricity and moving parts, potential hazards exist. To safely operate this appliance, become familiar with its operation and exercise care when using it.

4_ safety information

WF1702W5-03013M-04_EN.indd 4		2014/7/4 9:39:47

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using WARNING your appliance, follow basic precautions, including the following:

Do not let children (or pets) play in or on your washing machine. The washing machine door does not open easily from the inside and children may be seriously injured if trapped inside.

This appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

For use in Europe: This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

This appliance should be positioned so that the power plug, the water supply taps, and the drain pipes are accessible.

For appliances with ventilation openings in the base, that a carpet must not obstruct the openings.

The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.

CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

safety information _5

WF1702W5-03013M-04_EN.indd 5		2014/7/4 9:39:47

safety information

WARNING SEVERE WARNING SIGNS FOR INSTALLATION

The installation of this appliance must be performed by a qualified technician or service company.

-Failure to do so may result in electric shock, fire, an explosion, problems with the product, or injury.

The appliance is heavy, take care upon lifting it

Plug the power cord into an AC 220V/50Hz/15A wall socket or higher and use the socket for this appliance only. In addition, do not use an extension cord.

-Sharing a wall socket with other appliances using a power strip or extending the power cord may result in electric shock or fire.

-Ensure that the power voltage, frequency and current are the same as those of the product specifications. Failure to do so may result in electric shock or fire. Failure Plug the power plug into the wall socket firmly.

Remove all foreign substances such as dust or water from the power plug terminals and contact points using a dry cloth on a regular basis.

-Unplug the power plug and clean it with a dry cloth.

-Failure to do so may result in electric shock or fire.

Plug the power plug into the wall socket in the right direction so that the cord runs towards the floor.

-If you plug the power plug into the socket in the opposite direction, the electric wires within the cable may be damaged and this may result in electric shock or fire.

Keep all packaging materials well out of the reach of children, as packaging materials can be dangerous to children.

- If a child places a bag over its head, it may result in suffocation.

When the appliance or power plug or power cord is damaged, contact your nearest service centre.

This appliance must be properly grounded.

Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.

-This may result in electric shock, fire, an explosion, or problems with the product

-Never plug the power cord into a socket that is not grounded correctly and make sure that it is in accordance with local and national codes.

Do not install this appliance near a heater, inflammable material.

Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct sunlight and water (rain drops).

Do not install this appliance in a location of low temperature - Frost may cause tubes to burst

Do not install this appliance in a location where gas may leak. - This may result in electric shock or fire.

Do not use an electric transformer.

- It may result in electric shock or fire.

Do not use a damaged power plug, damaged power cord or loose wall socket. - This may result in electric shock or fire.

Do not pull or excessively bend the power cord. Do not twist or tie the power cord.

6_ safety information

WF1702W5-03013M-04_EN.indd 6		2014/7/4 9:39:47

Do not hook the power cord over a metal object, place a heavy object on the power cord, insert the power cord between objects, or push the power cord into the space behind the appliance.

- This may result in electric shock or fire.

Do not pull the power cord, when unplugging the power plug.

-Unplug the power plug by holding the plug.

-Failure to do so may result in electric shock or fire.

Do not lay the power cord and tubes where you may fall over them.

CAUTION CAUTION SIGNS FOR INSTALLATION

This appliance should be positioned in such a way that it is accessible to the power plug. - Failure to do so may result in electric shock or fire due to electric leakage.

Install your appliance on a level and hard floor that can support its weight.

-Failure to do so may result in abnormal vibrations, moves, noise, or problems with the product.

WARNING SEVERE WARNING SIGNS FOR USING

If the appliance is flooded, cut the water supply and power immediately and contact your nearest service centre.

-Do not touch the power plug with wet hands

-Failure to do so may cause electric shock

If the appliance generates a strange noise, a burning smell or smoke, unplug the power plug immediately and contact your nearest service centre.

- Failure to do so may result in electric shock or fire.

In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without touching the power plug. Do not touch the appliance or power cord.

-Do not use a ventilating fan.

-A spark may result in an explosion or fire.

Do not let children play in or on the washer. In addition, when disposing of the appliance, remove the washer door lever.

- If trapped inside, the child may become trapped and suffocate to death.

Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the washer before using it.

safety information _7

WF1702W5-03013M-04_EN.indd 7		2014/7/4 9:39:47

safety information

Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or other flammable or explosive substances.

- This may result in electric shock, fire or an explosion.

Do not open the washer door by force while it is operating (high-temperature washing/ drying/spinning).

- Water flowing out of the washer may result in burns or cause the floor to be slippery.

This may result in injury.

- Opening the door by force may result in damage to the product or injury.

Do not insert your hand under the washer. - This may result in injury.

Do not touch the power plug with wet hands. - This may result in electric shock.

Do not turn the appliance off by unplugging the power plug while an operation is in progress.

-Plugging the power plug into the wall socket again may cause a spark and result in electric shock or fire.

Do not let children or infirm persons use this washer unsupervised. Do not let children climb in the appliance

- Failure to do so may result in electric shock, burns or injury.

Do not insert your hand or a metal object under the washer while it is operating. - This may result in injury.

Do not unplug the appliance by pulling at the power cord, always grip plug firmly and pull straight out from the outlet.

- Damage to the cord may cause short-circuit, fire and/or electric shock

Do not attempt to repair, disassemble, or modify the appliance yourself.

- Do not use any fuse(such as cooper, steel wire, etc.) other than the standard fuse.

-When repairing or reinstalling the appliance is required, contact your nearest service centre.

-Failure to do so may result in electric shock, fire, problems with the product, or injury.

If any foreign substance such as water has entered the appliance, unplug the power plug and contact your nearest service centre.

- Failure to do so may result in electric shock or fire.

When the water supply hose comes loose from the faucet and floods the appliance, unplug the power plug.

- Failure to do so may result in electric shock or fire.

Unplug the power plug when the appliance is not being used for long periods of time or during a thunder/lightning storm.

- Failure to do so may result in electric shock or fire.

8_ safety information

WF1702W5-03013M-04_EN.indd 8		2014/7/4 9:39:47

CAUTION CAUTION SIGNS FOR USING

When the washer is contaminated by a foreign substance such as detergent, dirt, food waste, etc., unplug the power plug and clean the washer using a damp and soft cloth.

- Failure to do so may result in discoloration, deformation, damage or rust.

The front glass may be broken by a strong impact. Take care when using the washer. - When the glass is broken, it may result in injury.

After a water supply failure or when reconnecting the water supply hose, open the faucet slowly.

Open the faucet slowly after a long period of non-use.

-The air pressure in the water supply hose or the water pipe may result in damage to a part or in water leakage.

If a drain error occurs during an operation, check if there is a draining problem.

-If the washer is used when it is flooded because of a draining problem, it may result in electric shock or fire due to electric leakage.

Insert the laundry into the washer completely so that laundry does not get caught in the door.

-If laundry gets caught in the door, it may result in damage to the laundry or the washer, or result in water leakage.

Ensure that the faucet is turned off when the washer is not being used.

-Ensure that the screw on the water supply hose connector is properly tightened.

-Failure to do so may result in property damage or injury.

Check if the rubber seal is not contaminated by foreign substances (waste, thread, etc). - If the door is not closed completely, it may result in water leakage.

Open the faucet and check if the water supply hose connector is firmly tightened and that there is no water leaking before using the product.

- If the screws or the water supply hose connector are loose, it may result in water leakage.

To reduce the risk of fire or explosion:

-Under certain conditions, hydrogen gas may be produced in a hot water system such as your hot water heater that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If your hot water system has not been used for two weeks or more, turn on all hot water taps in your home, and let the water flow for several minutes before using your washing machine. This will release any hydrogen gas build–up. Since hydrogen gas is flammable, do not smoke or light an open flame during this time. Ventilate immediately without touching the power plug if there is a gas leak.

The product you have purchased is designed for domestic use only.

The use for business purposes qualifies as product misuse.

In this case, the product will not be covered by the standard warranty provided by Samsung and no responsibility can be attributed to Samsung for malfunctions or damages resulting from such misuse.

safety information _9

WF1702W5-03013M-04_EN.indd 9		2014/7/4 9:39:47

safety information

Do not stand on top of the appliance or place objects (such as laundry, lighted candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.

- This may result in electric shock, fire, problems with the product, or injury.

Do not spray volatile material such as insecticide onto the surface of the appliance.

-As well as being harmful to humans, it may also result in electric shock, fire or problems with the product.

Do not place an object that generates a electromagnetic field near the washer. - This may result in injury due to a malfunction.

Since the water drained during a high-temperature wash or drying cycle is hot, do not touch the water.

- This may result in burns or injury.

Do not wash, spin or dry water-proof seats, mats or clothing (*) unless your appliance has a special program for washing these items.

-Do not wash thick, hard mats even if the washer mark is on the care label.

-This may result in injury or damage to the washer, walls, floor or clothing due to

abnormal vibrations.

*Woollen bedding, rain covers, fishing vests, ski pants, sleeping bags, diaper covers, sweat suits, and bicycle, motor cycle, car covers, etc.

Do not operate the washer when the detergent box is removed. - This may result in electric shock or injury due to water leakage.

Do not touch the inside of the tub during or just after drying as it is hot. - This may result in burns.

Do not insert your hand into the detergent box after opening it.

-This may result in injury as your hand may be caught by the detergent input device.Do not place any objects (such as shoes, food waste, animals) other than laundry into the washer.

-This may result in damage to the washer, or injury and death in the case of pets due to the abnormal vibrations.

Do not press the buttons using sharp objects such as pins, knifes, fingernails, etc. - This may result in electric shock or injury.

Do not wash laundry contaminated by oils, creams or lotions usually found in skincare shops or massage clinics.

- This may result in the rubber seal becoming deformed and water leakage.

Do not leave metal objects such as a safety pin or hair pin, or bleach in the tub for long periods of time.

-This may cause the tub to rust.

-If rust starts appearing on the surface of the tub, apply a cleansing agent (neutral) to the surface and use a sponge to clean it. Never use a metal brush.

Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry contaminated by dry cleaning detergent.

-This may result in spontaneous combustion or ignition due to the heat of the oxidation of the oil.

Do not use hot water from water cooling/heating devices. - This may result in problems with the washer.

10_ safety information

WF1702W5-03013M-04_EN.indd 10		2014/7/4 9:39:47

Do not use natural hand-washing soap for the washer.

-If it hardens and accumulates inside the washer, it may result in problems with the product, discoloration, rust or bad odors.

Do not wash large laundry items such as bedding in the washing net.

-Place socks and brassieres into the washing net and wash them with the other laundry.

-Failure to do so may result in injury due to abnormal vibrations.

Do not use hardened detergent.

- If it accumulates inside the washer, it may result in water leakage.

For washing machines with ventilation openings in the base, ensure that the opening is not obstructed by carpet or any other obstacles.

Make sure that the pockets of all clothing to be washed are empty.

-Hard, sharp objects, such as coins, safety pins, nails, screws, or stones can cause extensive damage to the appliance.

Do not wash clothing with large buckles, buttons, or other heavy metal.

WARNING SEVERE WARNING SIGNS FOR CLEANING

Do not clean the appliance by spraying water directly onto it. Do not use the strong acid cleaning agent.

Do not use benzene, thinner or alcohol to clean the appliance.

- This may result in discoloration, deformation, damage, electric shock or fire.

Before cleaning or performing maintenance, unplug the appliance from the wall socket. - Failure to do so may result in electric shock or fire.

safety information _11

WF1702W5-03013M-04_EN.indd 11		2014/7/4 9:39:47

contents

setting up your washing

machine

13

washing a load of laundry

21

cleaning and maintaining your

washing machine

30

13Checking the parts

14Meeting installation requirements

14Electrical supply and grounding

14Water Supply

15Drain

15	Flooring
15	Surrounding temperature
15	Alcove or closet installation
15	Installing your washing machine

21Washing for the first time

21Basic instructions

22Using the control panel

24Child lock

24Sound off

25Delay end

25Eco Bubble

26Washing clothes using the cycle selector

27Washing clothes manually

29Detergent and additives information

29Which detergent to use

29Detergent drawer

30Draining the washing machine in an emergency

30Cleaning the exterior

31Cleaning the detergent drawer and drawer recess

32Cleaning the debris filter

33Cleaning the water hose mesh filter

33 Repairing a frozen washing machine

33 Storing your washing machine

troubleshooting and

information codes

34

cycle chart

36

appendix

37

34Check these points if your washing machine...

35Information codes

36Cycle chart

37Fabric care chart

37Protecting the environment

37Declaration of conformity

38Specifications

39Sheet of household washing machines

41Information of main washing programmes

12_ contents

WF1702W5-03013M-04_EN.indd 12		2014/7/4 9:39:48

setting up your washing machine

Be sure to have your installer follow these instructions closely so that your new washing machine works properly and so that you’re not at risk of injury when doing laundry.

Checking the parts

Carefully unpack your washing machine, and make sure you’ve received all of the parts shown below. If your washing machine was damaged during shipping, or if you do not have all of the parts, contact Samsung Customer Service or your Samsung dealer.

Release lever	Work top
Detergent drawer

Control panel

	Plug
Door
	Drain hose
	Debris filter
Adjustable feet
Tub	Emergency drain tube
	Filter Cover

<![if ! IE]>

<![endif]>up setting 01

		* Bolt hole	Cold	Hot (Selected
	Spanner			model)	Hose guide	Cap fixer
		covers
			Water supply hose

* Bolt hole covers : The number of bolt hole covers depends on the model (3~5 covers).

setting up your new washing machine _13

WF1702W5-03013M-04_EN.indd 13		2014/7/4 9:39:49

setting up your washing machine

Meeting installation requirements

Electrical supply and grounding

To prevent unnecessary risk of fire, electrical shock, or personal injury, all wiring and grounding must be done in accordance with the National Electrical Code ANSI/FNPA, No. 70 Latest Revision and local codes and ordinances. It is the personal responsibility of the appliance owner to provide adequate electrical service for this appliance.

Never use an extension cord.

WARNING Use only the power cord that comes with your washing machine. When preparing for installation, ensure that your power supply offers:

•220V~240V 50Hz 15 AMP fuse or circuit breaker

•Individual branch circuit serving only your washing machine

Your washing machine must be grounded. If your washing machine malfunctions or breaks down, grounding will reduce the risk of electric shock by providing a path of least resistance for the electric current.

Your washing machine comes with a power cord having a three-prong grounding plug for use in a properly installed and grounded outlet.

Never connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.

Improperly connecting the equipment-grounding conductor can result electrical shock. Check with a qualified electrician or serviceman if you are unsure if the washing machine is

properly grounded. Do not modify the plug provided with the washing machine. If it does not fit the outlet, have a proper outlet installed by a qualified electrician.

Water Supply

Your washing machine will fill properly when your water pressure is 50 kPa ~ 800 kPa. Water pressure less than 50 kPa may cause water valve failure, not allowing the water valve to shut off completely. Or, it may take the washing machine longer to fill than what the controls allow, resulting in your washing machine turning off. (A fill-time limit, designed to prevent overflows/ flooding if an internal hose becomes loose, is built into the controls.)

The water taps must be within 4 feet (122cm) of the back of your washing machine for the provided inlet hoses provided to reach your washing machine.

Most plumbing supply stores sell inlet hoses of various lengths up to 10 feet (305cm) long. You can reduce the risk of leaks and water damage by:

•Making water taps easily accessible.

•Turning off taps when the washing machine is not in use.

•Periodically checking for leaks at water inlet hose fittings.

Before using your washing machine for the first time, check all connections at the water WARNING valve and taps for leaks.

14_ setting up your new washing machine

WF1702W5-03013M-04_EN.indd 14		2014/7/4 9:39:49

Drain

Samsung recommends a standpipe height of 65 cm. The drain hose must be routed through the drain hose clip to the standpipe. The standpipe must be large enough to accept the outside diameter of the drain hose. The drain hose is attached at the factory.

Flooring

For best performance, your washing machine must be installed on a solidly constructed floor. Wood floors may need to be reinforced to minimize vibration and/or unbalanced loads. Carpeting and soft tile surfaces are contributing factors to vibrations and the tendency for your washing machine to move slightly during the spin cycle.

Never install your washing machine on a platform or poorly supported structure.

Surrounding temperature

Do not install your washing machine in areas where water may freeze, since your washing machine always retains some water in its water valve, pump, and hose areas. Frozen water in the lines can cause damage to belts, the pump, and other components.

Alcove or closet installation

To operate safely and properly, your new washing machine requires minimum clearances of:

Sides – 25 mm	Rear – 51 mm
Top – 25 mm	Front – 465 mm

If both the washing machine and a dryer are installed together, the front of the alcove or closet must have at least 465 mm unobstructed air opening. Your washing machine alone does not require a specific air opening.

Installing your washing machine

STEP 1

Selecting a location

Before you install the washing machine, make sure the location:

•Has a hard, level surface without carpeting or flooring that may obstruct ventilation

•Is away from direct sunlight

•Has adequate ventilation

•Will not be freezing (below 32 ˚F or 0 ˚C)

•Is away from heat sources such as oil or gas

•Has enough space so that the washing machine doesn’t stand on its power cord

setting up your new washing machine _15

<![if ! IE]>

<![endif]>up setting 01

WF1702W5-03013M-04_EN.indd 15		2014/7/4 9:39:49

setting up your washing machine

STEP 2

Removing the shipping bolts

Before installing the washing machine, you must remove the five shipping bolts from the back of the unit.

1. Loosen all the bolts with the supplied wrench.

Option

2. Hold the bolt with the spanner and pull it through the wide
section of the hole. Repeat for each bolt.	Option

3. Fill the holes with the supplied plastic covers.

Option

4.Store the shipping bolts away safely in case you have to move the washing machine in the future.

Packaging materials can be dangerous to children; keep all packaging material (plastic WARNING bags, polystyrene, etc.) well out of the reach of children.

Insert the cap fixer, (one of the accessories in the vinyl pack), into the hole from which you removed the power cord at the back of the product.

16_ setting up your new washing machine

WF1702W5-03013M-04_EN.indd 16		2014/7/4 9:39:49

STEP 3

Adjusting the levelling feet

When installing your washing machine, ensure that the power plug, the water supply and the drain are easily accessible.

1.Slide the washing machine into position.

2.Level your washing machine by turning the

leveling feet in and out as necessary by hand.

3.When your washing machine is level, tighten the nuts using the wrench supplied with your washing machine.

<![if ! IE]>

<![endif]>up setting 01

STEP 4

Connecting the water and drain

Connecting the water supply hose

1.	Take the L-shaped arm fitting for the cold water	Option

supply hose and connect it to the cold water supply intake on the back of the machine. Tighten by hand.

The water supply hose must be connected to the washing machine at one end and to the water tap at the other. Do not stretch the water supply hose. If the hose is too short, replace the hose with a longer, high pressure hose.

2. Connect the other end of the cold water supply hose to your sink’s cold water tap and tighten it by hand. If necessary, you can reposition the water supply hose at the washing machine end by loosening the fitting, rotating the hose, and retightening the fitting.

For selected models with an additional hot water intake:

1.Take the red L-shaped arm fitting for the hot water supply hose and connect it to the hot water supply intake on the back of the machine. Tighten by hand.

2.Connect the other end of the hot water supply hose to your sink’s hot water tap and tighten it by hand.

3.Use a Y-piece if you only want to use cold water.

setting up your new washing machine _17

WF1702W5-03013M-04_EN.indd 17		2014/7/4 9:39:50

setting up your washing machine

Connecting the water supply hose (selected models)

1. Remove the adaptor from the water supply hose.

Adaptor

Water supply hose

2.First, using a ‘+’ type screwdriver, loosen the four screws on the adaptor. Next, take the adaptor and turn part (2) following the arrow until there is a 5 mm gap.

	1	5 mm
	2

3. Connect the adaptor to the water tap by tightening the screws firmly while lifting the adaptor upwards.

Turn part (2) following the arrow and connect (1) and (2).

Water tap

1

2

4. Connect the water supply hose to the adaptor. When you release part (3), the hose automatically connects to the adaptor making a ‘click’ sound.

After you have connected the water supply hose to the adaptor, ensure that it is connected correctly by pulling the water supply hose downwards.

3

5. Connect the other end of the water supply hose to the inlet

	water valve at the rear of the washing machine. Screw the	Option
	hose clockwise all the way in.

18_ setting up your new washing machine

WF1702W5-03013M-04_EN.indd 18		2014/7/4 9:39:50

	6. Turn on the water supply and ensure that no water leaks
	from the water valve, tap or adaptor. If there is a water
	leaks, repeat the previous steps.
	Do not use your washing machine if there is a water leak.
	WARNING This may cause electric shock or injury.

•If the water tap has a screw type tap, connect the water supply hose to the tap as shown.

<![if ! IE]>

<![endif]>up setting 01

Use the most conventional type of tap for the water supply. In case the tap is square or too big, remove the spacing ring before inserting the tap into the adaptor.

setting up your new washing machine _19

WF1702W5-03013M-04_EN.indd 19		2014/7/4 9:39:51

setting up your washing machine

Connecting the drain hose

The end of the drain hose can be positioned in three ways:

1.Over the edge of a wash basin: The drain hose must be placed at a height of between 60 and 90 cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure the guide to the wall with a hook or to the tap with a piece of string to prevent the drain hose from moving.

Drain hose

Hose guide

<![if ! IE]>

<![endif]>60 ~ 90 cm

2.ln a sink drain pipe branch: The drain pipe branch must be above the sink siphon so that the end of the hose is at least 60 cm above the ground.

3.ln a drain pipe: We recommend using a 65 cm high vertical pipe; it must be no shorter than 60 cm and no longer than 90 cm.

The standpipe drain requires;

•minimum diameter 5 cm.

•minimum carry-away capacity 60 liter per minute.

<![if ! IE]>

<![endif]>60 ~ 90 cm

STEP 5

Powering your washing machine

Plug the power cord into a wall sockets, an AC 220-240V / 50Hz approved electrical outlet protected by a fuse or circuit breaker. (For more information on electrical and grounding requirements, see page 14.)

Test run

Make sure that you install your washing machine correctly by running the Rinse+Spin cycle after the installation is complete.

STEP 6

Calibration mode

Samsung washing machine detects the laundry weight automatically. For more accurate weight detection, please run Calibration Mode after the installation. Calibration mode is done by following the steps below.

1.Remove laundry or any contents in the machine and turn off the machine.

2.Press the Temp button and Delay End button simultaneously, and press the Power button in addition. Then the machine turns on.

3.Press the Start button to activate “Calibration Mode”.

4.The drum rotates clockwise and counterclockwise approximately for 3 minutes.

5.When “Calibration Mode” is fiinished, “End(En)” appears on the display, and the machine automatically turns off. The washing machine is now ready for use.

20_ setting up your new washing machine

WF1702W5-03013M-04_EN.indd 20		2014/7/4 9:39:51

washing a load of laundry

With your new Samsung washing machine, the hardest part of doing laundry will be deciding which load to wash first.

Washing for the first time

Before washing laundry for the first time, you must run a complete empty cycle (i.e. no laundry).

1.	Press the Power button.
2.	Add a little detergent to the detergent compartment in
	the detergent drawer.
3.	Turn on the water supply to the washing machine.
4.	Press the Start/Pause button.

This will remove any water that might be left over in the machine from the manufacturer’s test run.

Compartment : Detergent for prewash, or starch.

Compartment : Detergent for the main wash, water softener, pre-soaking agent, bleach and stain removal product.

Compartment : Additives, e.g. fabric softener or former (fill no higher than lower edge (MAX) of “A”)

Basic instructions

1. Load your laundry into the washing machine.

Do not overload the washing machine. To determine the load capacity for each type of WARNING laundry, refer to the chart on page 27.

• Make sure that laundry is not caught in the door, as this may cause a water leak.

• Washing detergent may remain in the front rubber part of the washer after a wash cycle.

Remove any remaining detergent, as they may cause a water leak.

•Do not wash water-proofed items.

2.Close the door until it latches.

3.Turn the power on.

4.Add detergent and additives to the dispenser drawer.

5.Select the appropriate cycle and options for the load.

The Wash Indicator light will illuminate and the estimated cycle time will appear in the display.

6.Press the Start/Pause button.

washing a load of laundry _21

<![if ! IE]>

<![endif]>laundry of load a Washing 02

WF1702W5-03013M-04_EN.indd 21		2014/7/4 9:39:52

washing a load of laundry

Using the control panel

WF160****

WF170****

1

2

3

4

5

6

7

8

9

10

11

12

WF1702W5S/YFH

WF1702W5W/YFH

WF1600W5W/XSG

1 2 3 4 5 6 7 8 9 10 11 12

	1	DIGITAL GRAPHIC	Displays the remaining wash cycle time, all cycle information, and error
		DISPLAY	messages.
			Select the tumble pattern and spin speed for the cycle.
			For detailed information, refer to “Washing clothes using the cycle
			selector” (see page 26).
			Cotton - For averagely or lightly soiled cotton, bed linen, table linen,
			underwear, towels, shirts, etc.
			Synthetics - For averagely or lightly soiled blouses, shirts, etc., made of
			polyester (diolen, trevira), polyamide (perlon, nylon) or other similar blends.
			Denim - A higher water level in the main wash and extra rinse ensure that
			no washing powder remains that may mark your clothing.
			Bedding - For bed spread, bed sheet, duvet cover etc.
			Wash under 2 kg and only 1 kind of bedding to achieve the best
			result.
			Dark Garment - Additional rinses and reduced spinning ensure that your
			favourite dark clothes are washed gently and rinsed thoroughly.
			Daily Wash - Use for everyday items such as underwear and shirts. Short
	2 CYCLE SELECTOR		programme for test institutes.
			Super Eco Wash - Low temperature Eco Bubble ensures that you achieve

perfect wash results while allowing effective energy saving.

Outdoor Care - Use for outdoor wear such as mountain clothes, skiwear, and sports wear. Fabrics include functional technology fiinishes and fiibers such as spandex, stretch, and micro-fiiber.

Baby Care - High temperature wash and extra rinses ensure that no washing powder remains to mark your thin clothes.

Wool - Only for machine-washable wool. A load should be less than 2.0 kg.

• The wool course washes the laundry using gentle cradling actions. During the wash, the gentle cradling and soaking actions are continued to protect the wool fibers from shrinkage / distortion and for a super gentle clean. This stop operation is not a problem.

• Neutral detergent is recommended for wool course, for improved washing results and for improved care of the wool fibers.

Handwash - A very light wash cycle as gentle as a hand wash. Rinse & Spin - Use for a load that needs rinsing only or to add rinseadded fabric softener to a load.

22_ washing a load of laundry

WF1702W5-03013M-04_EN.indd 22		2014/7/4 9:39:53

	3	PREWASH	Press this button to select pre-wash. Pre-wash is only available with:
		SELECTION BUTTON	Cotton, Synthetics, Denim, Bedding, Dark Garment, Daily Wash, Baby Care.
		DELAY END	Press this button repeatedly to cycle through the available Delay End options
	4		(from 3 hours to 19 hours in one hour increments).
		SELECTION BUTTON
			The hour displayed indicates the time when the wash cycle will be finished.
	5	TEMPERATURE	Press to change the water temperature for the current course.
		SELECTION BUTTON
	6	RINSE SELECTION	Press this button to add additional rinse cycles. The maximum number of
		BUTTON	rinse cycles is five.
			Press the button repeatedly to cycle through the available speeds for the
			spin cycle.
			WF1704/WF1604			All Lamps Turn Off,			, 400, 800, 1200, 1400 rpm
		SPIN SELECTION	WF1702/WF1602			All Lamps Turn Off,			, 400, 800, 1000, 1200 rpm
	7		WF1700/WF1600			All Lamps Turn Off,			, 400, 600, 800, 1000 rpm
		BUTTON
			“No spin ” - The laundry remains in the drum and no spin cycle is
			performed after the final drain.
			“Rinse hold (All Lamp Turn Off)” -The laundry remains soaking in the
			final rinse water. Before the laundry can be unloaded, either a Drain or
			Spin cycle must be performed.
			Press this button repeatedly to cycle through the wash options:
			Soak	 Intensive			 Easy Iron		 Soak	+ Intensive	
			Soak	+ Easy Iron			 Intensive	+ Easy Iron		 Soak	+
			Intensive		+ Easy Iron		 off
			“Easy Iron		”: Use this option to prepare your laundry so that it can be
			easily ironed.
			“Intensive		”: Press this button when the laundry is heavily soiled and
		WASH OPTION	needs to be washed intensively. The cycle time is increased for each
	8		cycle.
		SELECTION BUTTON
			“Soak	”: Use this option to effectively remove stains from your laundry
			by soaking your laundry.
			• The Soak function is performed 13 minutes into the wash cycle.
			• The Soak function continues for 30 minutes with six cycles, where
			one cycle is a soak cycle that spins for 1 minute and stands still for 4
			minutes.
			• The Soak function is only available for the following wash programs:
			Cotton, Synthetics, Denim, Bedding, Baby care, Daily wash.
			For lightly soiled garments and less than 2kg laundry that you require quickly.
			It takes about minimum 15 minute, but can vary from the indicated values
			depending on water pressure, water hardness, water inlet temperature,
		QUICK WASH	room temperature, type and amount of washing and degree of soiling,
	9		utilized detergent unbalaced load, flluctuation in the electricity supply and
		SELECTION BUTTON	extra options selected.

• Press this button repeatedly to choose cycle time: 15min  20min  30min  40min  50min  60min  Off

Powdered/Liquid detergent should be under 20g(for 2kg load) or WARNING detergent may remain on the clothes.

washing a load of laundry _23

<![if ! IE]>

<![endif]>laundry of load a Washing 02

WF1702W5-03013M-04_EN.indd 23		2014/7/4 9:39:53

washing a load of laundry

			Eco Bubble selection is turned on as a default. Press the Eco Bubble
			option button once to deselect and the Bubble Generator OFF (shown
			on the panel), press it again to turn the function back ON.
			• Some wash cycles must have Eco Bubble option ON (will show on
	10	ECO bUbblE	the panel, and the Generator will turn on automatically).
		sElECTION bUTTON	• Other wash cycles do not need this option and automatically turn the
			Generator OFF.
			• On many cycles, you can manually adjust this option, which will
			visibly affect wash time on the panel to achieve results (please see
			page 25 for more information).
	11	sTART/pAUsE	Press to pause and restart a cycle.
		sElECTION bUTTON
			Press it once to turn your washing machine on, press it again to turn
	12	pOWER bUTTON	your washing machine off.
			If the washing machine is left on for more than 10 minutes without any

buttons being touched, the power automatically turns off.

Child lock

The Child Lock function allows you to lock the buttons so that the wash cycle you’ve chosen can’t be changed.

Activating/Deactivating

If you want to activate or deactivate the Child Lock

function, press the Temp. and Rinse buttons at the same time for 3 seconds. “Child Lock ” will be lit when this feature is activated.

When the Child Lock function is activated, only the power button works. The Child Lock function remains on even after the power is turned on and off or after the disconnecting and reconnecting the

power cord.

3 SEC. 3 SEC.

Sound off

The Sound Off function can be selected during all courses. When this function is selected, sound is turned off for all courses. Even if the power is turned on and

off repeatedly, the setting is retained.

Activating/Deactivating

If you want to activate or deactivate the Sound Off function, press the spin and Option buttons at the same time for 3 seconds. The “Sound Off ” lamp on the control panel will be lit when this feature is activated.

3 SEC.

24_ washing a load of laundry

WF1702W5-03013M-04_EN.indd 24		2014/7/4 9:39:56

Delay end

You can set the washing machine to finish your wash automatically at a later time, choosing a delay of between 3 to 19 hours (in 1 hour increments). The hour displayed indicates the time at which the wash will be finished.

1.Manually or automatically set your washing machine according to the type of laundry you are washing.

2.Press the Delay End button repeatedly until the delay time is set.

3.Press the Start/Pause button. The “Delay End ” indicator will be lit, and the clock will begin counting down until it reaches the set time.

4.To cancel a Delay End function, press the Power button and then turn the washing machine on again.

Eco Bubble

Eco Bubble technology activates the detergent much earlier and faster in the wash cycle by use of a Bubble Generator, rapidly mixing a small amount of water with air and detergent (works with powder, tabs or liquid detergents). This creates a foam cushion in the drum ahead of introducing the main water intake, and the detergent infused bubbles penetrate the fabrics much faster and efficiently than for a conventional wash system, delivering a cleaner wash performance especially for colder temperature cycles. The lower the water temperature of the cycle, the greater the impact of using Eco Bubble versus conventional systems, this allowing more use of colder wash cycles and helping to save energy. In addition, since the detergent has had assistance in dissolving thoroughly early in the cycle, there is no need to worry about detergent residues.

The bubble function is available in all courses and the function availability is as follows.

	Course	Bubble function	Canceling the bubble function
	Cotton, Synthetics, Denim,		Available
	Bedding, Dark Garment, Daily Wash
		Available
	Super Eco Wash, Outdoor Care,		Not available
	Baby Care, Wool, Hand Wash

•A different bubble function may be applied depending the course.

Eco Bubble selection is default. Press it once to deselect bubble option, press it again to select bubble option.

1.Open the door, place the laundry inside the wash tub and close the door.

2.Press the Power button.

3.Select a function.

4.Place the appropriate amount of detergent and fabric

softener into the corresponding compartments depending on the amount of laundry and close the detergent drawer.

• Add the appropriate amount of detergent into the detergent compartment , and add the fabric softener to softener compartment just under the fiiber softener base line (MAX) of “A”)

•When the Prewash course is selected, add detergent

into the prewash compartment as well.

washing a load of laundry _25

<![if ! IE]>

<![endif]>02Wa sh in gloa oad aunfl dry

WF1702W5-03013M-04_EN.indd 25		2014/7/4 9:39:56

washing a load of laundry

5.Press the Start/Pause button.

•Press the Start/Pause button to start the wash.

•The amount of the laundry is automatically detected and the laundry is washed.

•Once a washing machine operation begins, you cannot add or select the bubble function.

• Enough bubbles are generated with the specifiied amount of detergent.

•Please clean the Debris fiilter frequently. Periodic cleaning helps generate suffiicient bubbles.

•Depending on the detergent and the laundry, the bubbles may be absorbed and seem like a small quantity.

•Although bubbles are generated once the wash begins, it may take several minutes for users to see them.

Washing clothes using the cycle selector

Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Control” automatic control system. When you select a wash program, the machine will set the correct temperature, washing time, and washing speed.

1.Turn on your sink’s water tap.

2.Press the Power button.

3.Open the door.

4.Load the articles one at a time loosely into the drum, without overfilling it.

5.Close the door.

6.Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate compartments.

Pre-wash is only available when selecting the Cotton, Synthetics, Denim, Bedding, Dark Garment, Daily Wash and Baby Care cycles. It is only necessary if your clothing is heavily soiled.

7.Use the Cycle Selector to select the appropriate cycle according to the type of material: Cotton, Synthetics, Denim, Bedding, Dark Garment, Daily Wash, Super Eco Wash, Outdoor Care, Baby Care, Wool, Hand Wash. The relevant indicators will illuminate on the control panel.

8.At this time, you can control the wash temperature, the amount of rinses, the spinning speed, and the delay time by pressing the appropriate option button.

9.Press the Start/Pause button and the wash will begin. The process indicator will light up and the remaining time for the cycle will appear in the display.

Pause Option

Within 5 minutes of starting a wash, it is possible to add/remove laundry items. 1. Press the Start/Pause button to unlock the door.

The door cannot be opened when the water is too HOT or the water level is too HIGH. 2. After closing the door, press the Start/Pause button to restart the wash.

When the cycle is finished:

After the total cycle has finished, the power will turn off automatically.

1.Open the door.

2.Remove laundry.

26_ washing a load of laundry

WF1702W5-03013M-04_EN.indd 26		2014/7/4 9:39:56

Washing clothes manually

You can wash clothes manually without using the Cycle Selector.

1.Turn the water supply on.

2.Press the Power button on the washing machine.

3.Open the door.

4.Load the articles loosely into the drum one at a time, without overfilling it.

5.Close the door.

6.Add detergent and, if necessary, softener or prewash detergent, into the appropriate compartments.

7.Press the Temp. button to select the temperature.

8.Press the Rinse button to select the required number of rinse cycles. The maximum number of rinse cycles is five.

The wash duration is increased accordingly.

9.Press the Spin button to select the spin speed.

The rinse hold function allows you to remove items that are still wet from the washing machine. ( : No Spin, All Lamps Turn Off: Rinse Hold)

10.Press the Delay End button repeatedly to cycle through the available Delay End options (from 3 hour to 19 hours in one hour increments). The hour displayed indicates the time at which the wash will be finished.

11.Press the Start/Pause button and the machine will begin the cycle.

LAUNDRY GUIDELINES

Follow these simple guidelines for the cleanest laundry and the most efficient wash. Always check the Care label on clothing before washing.

Sort and wash your laundry according to the following criteria:

•Care Label: Sort laundry into cotton, mixed fibres, synthetics, silks, wool and rayons.

•Colour: Divide whites and colours. Wash new colour items separately.

•Size: Placing items of different sizes in the same load will improve the wash action.

•Sensitivity: Wash delicate items separately, using the Delicate wash cycle for pure, new woollen items, curtains and silk articles. Check the labels on the items you are washing or refer to the fabric care chart in the appendix.

Emptying pockets

Before each wash, empty all the pockets of your laundry. Small, irregularly shaped hard objects, such as coins, knives, pins, and paperclips could damage your washing machine. Do not wash clothing with large buckles, buttons, or other heavy metal objects.

Metal on clothing may damage your clothing as well as the tub. Turn clothing with buttons and embroidered clothes inside out before washing them. If zips of pants and jackets are open while washing, the spin basket may be damaged. Zips should be closed and fixed with a string before washing.

Clothing with long strings may become entangled with other clothes damaging them. Be sure to fix the strings before starting the wash.

Prewashing cotton

Your new washing machine, combined with modern detergents, will give perfect washing results, thus saving energy, time, water and detergent. However, if your cotton is particularly dirty, prewash with a protein-based detergent.

washing a load of laundry _27

<![if ! IE]>

<![endif]>02Wa sh in gloa oad aunfl dry

WF1702W5-03013M-04_EN.indd 27		2014/7/4 9:39:56