Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country |
Customer Care Centre |
Web Site |
|
|
|
AUSTRIA |
0810 - SAMSUNG (7267864, € 0.07/min) |
www.samsung.com/at |
BELGIUM |
02-201-24-18 |
www.samsung.com/be (Dutch) |
|
|
www.samsung.com/be_fr (French) |
CZECH |
800 - SAMSUNG (800-726786) |
www.samsung.com/cz |
|
Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8 |
|
DENMARK |
70 70 19 70 |
www.samsung.com/dk |
FINLAND |
030 - 6227 515 |
www.samsung.com/fi |
FRANCE |
01 48 63 00 00 |
www.samsung.com/fr |
GERMANY |
01805 - SAMSUNG (726-7864 € 0,14/Min) |
www.samsung.de |
HUNGARY |
06-80-SAMSUNG (726-7864) |
www.samsung.com/hu |
ITALIA |
800-SAMSUNG (726-7864) |
www.samsung.com/it |
LUXEMBURG |
261 03 710 |
www.samsung.com/lu |
NETHERLANDS |
0900-SAMSUNG (0900-7267864) (€ 0,10/Min) |
www.samsung.com/nl |
NORWAY |
815-56 480 |
www.samsung.com/no |
POLAND |
0 801 1SAMSUNG (172678) |
www.samsung.com/pl |
|
022-607-93-33 |
|
PORTUGAL |
80820-SAMSUNG (726-7864) |
www.samsung.com/pt |
SLOVAKIA |
0800-SAMSUNG (726-7864) |
www.samsung.com/sk |
SPAIN |
902 - 1 - SAMSUNG (902 172 678) |
www.samsung.com/es |
SWEDEN |
0771 726 7864 (SAMSUNG) |
www.samsung.com/se |
TURKEY |
444 77 11 |
www.samsung.com/tr |
U.K |
0845 SAMSUNG (7267864) |
www.samsung.com/uk |
EIRE |
0818 717100 |
www.samsung.com/ie |
SWITZERLAND |
0848 - SAMSUNG (7267864, CHF 0.08/min) |
www.samsung.com/ch |
|
|
www.samsung.com/ch_fr/(French) |
LITHUANIA |
8-800-77777 |
www.samsung.com/lt |
LATVIA |
8000-7267 |
www.samsung.com/lv |
ESTONIA |
800-7267 |
www.samsung.com/ee |
© 2011 Samsung Electronics Co., Ltd. All rights reserved. |
BN68-03404A-01 |
|
LED TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at
www.samsung.com/register
Model _____________ Serial No. _____________
For more information on how to use e-Manual (p. 14)
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.
Digital TV notice
1.Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal.
2.DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast transmission of digital TV over cable. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video On Demand) and so on, are not included in this specification. So, they cannot be workable at this moment.
3.Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts cannot be guaranteed.
4.Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may be required to agree to terms and conditions of their business.
5.Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers.
6.For more information, please contact your local Samsung customer care centre.
The reception quality of TV may be affected due to differences in broadcasting method between the countries. Please check the TV performance in the local SAMSUNG Authorized Dealer, or the Samsung Call Centre whether it can be improved by reconfiguring TV setting or not.
Still image warning
Avoid displaying still images (like jpeg picture files) or still image element (like TV programme logo, panorama or 4:3 image format, stock or news bar at screen bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of LED screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations:
•Avoid displaying the same TV channel for long periods.
•Always try do display any image on full screen, use TV set picture format menu for best possible match.
•Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process.
•Frequently use all TV features designed to reduce image retention and screen burnout, refer to e-Manual for details.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
• If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
|
|
The appearance may differ depending on the product. |
|
• Be careful when you contact the TV because some parts can be somewhat hot. |
|
Installation with a stand. |
Installation with a wall-mount. |
10 cm
10 cm |
10 cm |
|
10 cm |
10 cm |
10 cm |
|
10 cm |
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.
English - 2
Accessories
Please make sure the following items are included with your TV. If any items are missing, contact your dealer.
The items’ colours and shapes may vary depending on the models.Cables not included in the package contents can be purchased separately.
Check that there is no accessory hidden behind packing materials when you open the box.
[[CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET
•• |
Remote Control & Batteries (AAA x 2) |
•• |
Power Cord |
•• |
Owner’s Instructions |
•• |
Cleaning-Cloth |
•• Warranty Card (Not available in some locations) / Safety Guide
Holder Ring (4ea) |
|
|
Holder-Wire Stand |
CI Card Adapter |
|
|
|
|
|
|
|
|
|
|
AV / Component Adapter |
Scart Adapter |
•• An administration fee may be charged if either
––(a) an engineer is called out at your request and there is no defect in the product (i.e. where you have failed to read this user manual)
––(b) you bring the unit to a repair centre and there is no defect in the product (i.e. where you have failed to read this user manual).
•• The amount of such administration charge will be advised to you before any work or home visit is carried out.
Assembling the Holder-Wire stand
English - 3
Viewing the Control Panel
The product colour and shape may vary depending on the model.
|
Control Panel |
Remote control sensor |
Aim the remote control towards this spot on the TV. |
Power Indicator |
Blinks and turns off when the power is on and lights up in standby mode. |
SOURCEE |
Toggles between all the available input sources. In the on-screen menu, use |
|
this button as you would use the ENTEREbutton on the remote control. |
MENU |
Displays an on-screen menu, the OSD (on screen display) of your TV’s |
|
features. |
Y |
Adjusts the volume. In the OSD, use the Ybuttons as you would use |
|
the ◄ and ► buttons on the remote control. |
z |
Changes the channels. In the OSD, use the zbuttons as you |
|
would use the ▼ and ▲ buttons on the remote control. |
P(Power) |
Turns the TV on or off. |
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
English - 4
Viewing the Remote Control
This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel and Volume buttons.
Turns the TV on and off.
Selects the HDMI mode directly.
Have direct access to channels.
Alternately select Teletext ON, Double, Mix or OFF.
Adjusts the volume.
Opens the OSD.
Link to various application services.
Quickly select frequently used functions.
Returns to the previous menu.
These buttons are for the Channel List and SMART HUB menu, etc.
Use these buttons in SMART HUB and
Anynet+ modes.
POWER
HDMI
TTX/MIX
MUTE
CH LIST
HUB MENU
SMART
TOOLS
SOURCE
Displays and selects the available video sources.
PRE-CH Returns to the previous channel. Cuts off the sound temporarily.
Changes channels.
Displays channel lists on the screen.
GUIDE Displays the EPG (Electronic Programme
Guide).
INFO
Displays information on the TV screen.
RETURN
A B C
P.MODE SRS
E-MANUAL P.SIZE
|
u/d/l/r: Move the cursor on-screen |
|
|
menu item. |
|
EXIT |
ENTERE: Selects the menu and |
|
changes the corresponding item value. |
||
|
||
D |
Exits the menu. |
|
|
||
|
P.MODE: Press to select the Picture |
|
AD/SUBT. |
Mode. |
|
SRS: Selects the SRS Theatersound |
||
|
mode. |
|
|
DUAL f-g: Sound effect selection. |
|
|
E-MANUAL: Displays the e-Manual. |
|
|
P.SIZE: Selects the Picture Size. |
|
|
AD/SUBT.: Turns the audio description on |
|
|
and off (not available in some locations). / |
|
|
Displays digital subtitles. |
Installing batteries (Battery size: AAA)
English - 5
Changing the Input Source
Source
Use to select TV or an external input |
SOURCE |
sources such as a DVD / Blu-ray player / |
|
cable box / STB satellite receiver. |
|
■■ TV / Ext. / PC / HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / AV / Component / USB / AllShare
In the Source, connected inputs will be highlighted.
Ext. and PC always stay activated.
Edit Name
In the Source, press the TOOLS button, and then you can set an external input sources name you want.
■■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier.
When connecting a PC to the HDMI IN 1(DVI) port with HDMI cable, you should set the TV to
PC mode under Edit Name.
When connecting a PC to the HDMI IN 1(DVI) port with HDMI to DVI cable, you should set the TV to DVI PC mode under Edit Name.
When connecting an AV devices to the HDMI IN 1(DVI) port with HDMI to DVI cable, you should set the TV to DVI Devices mode under Edit Name.
Edit Favourites
In the Source, press the TOOLS button to select Edit Favourites. You can set an external input source to Favourites.
Information
You can see detailed information about the selected external device.
Refresh
In the Source, If the external devices is not displayed, press the TOOLS button to select Refresh. Searching for connected devices.
For best cable connection to this product, be sure to use cables with a maximum thickness as below:
•• Maximum thickness - 0.55 inches (14mm)
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.Preset: Connecting the mains and antenna.
VHF/UHF Antenna Cable
or
English - 6
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERPbutton. Plug & Play is available only when the Source is set to TV.
Before turning on the TV, make sure the antenna cable is connected (p. 6).
1 |
Selecting a language |
2 |
Setting the Network |
3 |
Selecting Store |
Demo or Home Use |
4 Selecting a country
5 |
ModeSetting the Clock |
6 |
Selecting an antenna |
7 |
Selecting a channel |
8 |
Complete |
Press the ▲ or ▼ button, then press the ENTEREbutton. |
POWER |
|
P |
||
Select the desired OSD (On Screen Display) language. |
||
Set up your network connection. Press the ENTEREbutton |
||
to start. If you want to setting to it later, select Skip. For more |
||
information, refer to “Wired/Wireless Network Connection” in the |
|
|
e-Manual. |
|
Press the ◄ or ► button, then press the ENTEREbutton.
Select the Home Use mode. Store Demo mode is for retail environments.
To return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the TV. When you see the volume OSD, press and hold MENU for 5 sec.
Store Demo is only for shop display. If you select it, several functions are not able to use. Please select Home Use when you watch at home.
Press the ▲ or ▼ button, then press the ENTEREbutton. Select the appropriate country.
After selecting the country in the Country menu, some models may proceed with an additional option to setup the pin number.
When you input the PIN number, “0-0-0-0” is not available. Set the Clock Mode automatically or manually.
Auto: Select the time zone where you are located.
Manual: Allows you to manually set the current date and time.
Press the ▲ or ▼ button, then press the ENTEREbutton. Select the Antenna source. The option may differ depending on country.
Press the ▲ or ▼ button, then press the ENTEREbutton. Select the channel source to memorise. When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel → Memorising Channels in the e-Manual.
Press the ENTEREbutton.
If You Want to Reset This Feature...
Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”. If you want to change the PIN number, use the Change PIN function.
You should do Plug & Play (MENU → System) again at home although you did in shop.
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on).
English - 7
Connecting to an AV devices
¦¦Availablereceiver, VCRdevices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite
HDMI connection
HDMI OUT
HDMI to DVI connection
DVI OUT
AUDIO OUT
R-AUDIO-L
Using an HDMI or an HDMI to DVI cable (up to 1080p)
HDMI IN 1(DVI), 2, 3, 4 / PC/DVI AUDIO IN
xx When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack for video. A DVD, Blu-ray player, HD cable box, or HD STB satellite receiver may require a DVI-HDMI (DVI to HDMI) cable or DVI-HDMI (DVI to HDMI) adapter. The PC/DVI AUDIO IN jack is required for audio.
xx Be sure to use an HDMI cable with a thickness of 14 mm or less.
xx The picture may not display normally (if at all) or the audio may not work if an external device that uses an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.
xx Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur.
English - 8
Component connection
COMPONENT OUT
PR PB Y
AUDIO OUT
R-AUDIO-L
AV connection
R |
R |
B |
B |
G |
G |
R |
R |
W |
W |
VIDEO OUT
AUDIO OUT
R-AUDIO-L
W R Y
Y |
W R
SCART connection
EXT
Using a Component (up to 1080p) or an Audio/Video (480i only) and a Scart Cable
In Ext. mode, DTV Out supports MPEG SD Video and Audio only.
When connecting to AV IN, the colour of the AV IN [VIDEO] jack (green) will not match the video cable (yellow).
To obtain the best picture quality, the Component connection is recommended over the A/V connection.
English - 9
Connecting to a Audio device and PC
¦¦ Available devices: digital audio system, amplifier, DVD home theatre
DVD home theatre connection
OPTICAL
Headphones connection
Using an Optical (Digital) or a Headphone Connection
DIGITAL AUDIO OUT (OPTICAL)
xx When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system.
xx 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
xx When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top- Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre.
Headphones H: You can connect your headphones to the headphones output on your set. While the headphones are connected, the sound from the built-in speakers will be disabled.
xx Sound function may be restricted when connecting headphones to the TV. xx Headphone volume and TV volume are adjusted separately.
English - 10
¦¦ Using an HDMI cable or an HDMI to DVI cable or a D-sub cable
Connecting through the HDMI cable may not be supported depending on the PC.
PC connection
HDMI OUT
DVI OUT
AUDIO OUT
AUDIO OUT
PC OUT
Display Modes (D-Sub and an HDMI to DVI Input)
Optimal resolution is 1920 X 1080 @ 60 Hz.
Mode |
Resolution |
Horizontal Frequency (KHz) |
Vertical Frequency (Hz) |
Pixel Clock Frequency (MHz) |
Sync Polarity (H / V) |
|
IBM |
640 x 350 |
31.469 |
70.086 |
25.175 |
+/- |
|
720 x 400 |
31.469 |
70.087 |
28.322 |
-/+ |
||
|
||||||
|
|
|
|
|
|
|
|
640 x 480 |
35.000 |
66.667 |
30.240 |
-/- |
|
MAC |
832 x 624 |
49.726 |
74.551 |
57.284 |
-/- |
|
|
1152 x 870 |
68.681 |
75.062 |
100.000 |
-/- |
|
|
|
|
|
|
|
|
|
640 x 480 |
31.469 |
59.940 |
25.175 |
-/- |
|
|
640 x 480 |
37.861 |
72.809 |
31.500 |
-/- |
|
|
640 x 480 |
37.500 |
75.000 |
31.500 |
-/- |
|
|
800 x 600 |
37.879 |
60.317 |
40.000 |
+/+ |
|
|
800 x 600 |
48.077 |
72.188 |
50.000 |
+/+ |
|
|
800 x 600 |
46.875 |
75.000 |
49.500 |
+/+ |
|
|
1024 x 768 |
48.363 |
60.004 |
65.000 |
-/- |
|
|
1024 x 768 |
56.476 |
70.069 |
75.000 |
-/- |
|
|
1024 x 768 |
60.023 |
75.029 |
78.750 |
+/+ |
|
VESA DMT |
1152 x 864 |
67.500 |
75.000 |
108.000 |
+/+ |
|
|
1280 x 1024 |
63.981 |
60.020 |
108.000 |
+/+ |
|
|
1280 x 1024 |
79.976 |
75.025 |
135.000 |
+/+ |
|
|
1280 x 800 |
49.702 |
59.810 |
83.500 |
-/+ |
|
|
1280 x 800 |
62.795 |
74.934 |
106.500 |
-/+ |
|
|
1280 x 960 |
60.000 |
60.000 |
108.000 |
+/+ |
|
|
1360 x 768 |
47.712 |
60.015 |
85.500 |
+/+ |
|
|
1440 x 900 |
55.935 |
59.887 |
106.500 |
-/+ |
|
|
1440 x 900 |
70.635 |
74.984 |
136.750 |
-/+ |
|
|
1680 x 1050 |
65.290 |
59.954 |
146.250 |
-/+ |
|
|
|
|
|
|
|
|
VESA DMT / |
1920 x 1080p |
67.500 |
60.000 |
148.500 |
+/+ |
|
DTV CEA |
||||||
|
|
|
|
|
NOTE
xx For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. xx The interlace mode is not supported.
xx The set might operate abnormally if a non-standard video format is selected.
xx Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
English - 11
Connecting to a COMMON INTERFACE slot
Attaching the CI Card Adapter
Attach the adapter as shown below.
To connect the CI CARD Adapter, follow these steps.
We recommend attaching the adapter before installing the wall mount, or inserting the “CI or CI+ CARD.”
1. Insert the CI CARD Adapter into the two holes on the |
TV Rear |
product 1. |
Please find a two holes on the rear of the TV. A two holes is beside the COMMON INTERFACE port.
2.Connect the CI CARD Adapter into the COMMON INTERFACE port on the product 2.
3.Insert the “CI or CI+ CARD”.
We recommand that you insert the CI card before you mount the TV on a wall.
It may be difficult to insert after the mounting.
Insert the card after attaching the CI-Module on TV.
It is difficult to attach the module if you insert the card before attaching.
Using the “CI or CI+ CARD”
To watch paid channels, the “CI or CI+ CARD” must be inserted.
•• If you don’t insert the “CI or CI+ CARD”, some channels will display the message “Scrambled Signal”.
•• The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.
•• When the configuration of channel information has finished, the message “Updating Completed” is displayed, indicating the channel list is updated.
NOTE
xx You must obtain a “CI or CI+ CARD” from a local cable service provider.
xx When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it.
xx Insert the “CI or CI+ CARD” in the direction marked on the card.
xx The location of the COMMON INTERFACE slot may be different depending on the model.
xx “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer. xx If you have any problems, please contact a service provider.
xx Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen.
English - 12
Network Connection
You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection.
Network Connection - Wireless
You can connect your TV to your LAN through a standard wireless router or modem. To connect wirelessly, you must first attach a “Samsung Wireless LAN adapter” (WIS09ABGN, WIS09ABGN2, WIS10ABGN - sold separately) to either the USB 1 (HDD) or USB 2 on the back of your TV. See the illustration below.
The LAN Port on |
Wireless IP sharer |
(router having DHCP |
|
the Wall |
server) |
|
or
Samsung Wireless
LAN Adapter
LAN Cable
Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE 802.11n. When you play the video over a IEEE 802.11b/g connection, the video may not play smoothly.
Most wireless network systems incorporate a security system that requires devices that access the network through an access point or wireless router (typically a wireless IP Sharer) to transmit an encrypted security code called an access key.
If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed) for your wireless router, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications.
Network Connection - Wired
There are two main ways to connect your TV to your network using cable, depending on your network setup. They are illustrated below:
The Modem Port on the Wall |
External Modem |
TV Rear Panel |
|
(ADSL / VDSL / Cable TV) |
|
Modem Cable |
|
LAN Cable |
The LAN Port on the Wall |
TV Rear Panel |
|
LAN Cable |
It is not supported when the network speed is under 10 Mbps.
English - 13
How to view the e-Manual
E-MANUAL |
You can read the introduction and instructions about the TV features stored |
|
in your TV. |
O MENUm→ Support → e-Manual → ENTERE
If you want to return to e-Manual, press E-MANUAL button on remote.
You can’t use the Try Now function, if the menu is not activated.
Screen Display
TV Screen: Displays the current input source screen.
Help: Displays the e-Manual Guide or Product guide. Press ENTERE
button.
Change the category. Press lor r button to select category you want.
Displays the sub-menu list. Press ENTEREbutton to select submenu you want.
Index: Displays index screen.
X: Exit the e-Manual.
Using the Help
Display the Product Guide by pressing Help.
How to view the e-Manual
You can read the introduction and instructions about |
|
the TV features stored in your TV. |
Basic Features |
O MENUm→ Support → e-Manual → ENTERE |
Adjusting Picture Settings |
|
Changing the Preset Picture Mode |
|
Changing the Picture Size |
|
Changing the Picture Options |
|
Setting up the TV with Your PC |
Help |
Index |
Sync media from multiple devices with AllShare
AllShare™ syncs your digital devices so you can enjoy music, movies and photos from your PC, camera and mobile devices, on your larger TV screen. Connects you to multiple PCs, as well.
Return |
Return |
<E-manual Guide>
The e-Manual guide appears as above.
<Product Guide>
The product guide appears as above.
How to toggle between the e-Manual and the corresponding menu(s).
Basic Features > Changing the Preset Picture Mode (5/10)
Changing the Preset Picture Mode
O MENUm→ Picture → Picture Mode → ENTERE
■Picture Mode t
Select your preferred picture type.
NWhen an input source is set to PC, the Picture Mode is only available the
Standard and Entertain.
• Dynamic: Suitable for a bright room.
• |
Standard: Suitable for a normal environment. |
• |
Natural for LED TV / Relax for PDP TV : Suitable for reducing eye strain. |
•Movie: Suitable for watching movies in a dark room.
•Entertain: Suitable for watching movies and games.
Help |
Try Now |
Home |
Zoom |
Index |
This function is not enabled in some menus.
Try Now
E-MANUAL
Picture |
|
|
Picture Mode |
|
Standard |
Cell light |
|
14 |
Contrast |
|
100 |
Brightness |
|
45 |
Sharpness |
|
50 |
Colour |
|
50 |
Tint (G/R) |
G 50 |
R 50 |
English - 14
Method 1
1.Select Try Now, if you want to execute the corresponding menu(s).
2.To return to the e-Manual screen, press the
E-MANUAL button.
Viewing the Contents
Method 2
1.Press the ENTEREbutton when selecting Contents Area. The “Are you sure?” is displayed. Select Yes and then press the ENTEREbutton. The OSD window will be displayed.
2.To return to the e-Manual screen, press the
E-MANUAL button.
Basic Features > Changing the Preset Picture Mode (5/10)
Changing the Preset Picture Mode
OO MENUm→ Picture → Picture Mode → ENTERE
■■ Picture Mode t
Select your preferred picture type.
NN When an input source is set to PC, the Picture Mode is only available the Standard and Entertain.
•Dynamic: Suitable for a bright room.
•Standard: Suitable for a normal environment.
• Natural for LED TV / Relax for PDP TV : Suitable for reducing eye strain.
•Movie: Suitable for watching movies in a dark room.
•Entertain: Suitable for watching movies and games.
Help |
Try Now |
Home |
Zoom |
Index |
Contents Area: You can view the corresponding contents, if you selected a sub-menu. To move previous or next page, press the lor rbutton.
Try Now: Displays the corresponding menu(s). Home: Moves to the e-Manual home screen. Zoom: Magnifies a screen.
Index: Displays index screen.
Using the Zoom mode
When you view the e-Manual instruction, select the Zoom to magnify the screen. You can scroll through the magnified screen by using the uor dbuttons.
To return to the previous screen, press the RETURN button.
Changing the Preset Picture Mode
OO MENUm→ Picture → Picture Mode → ENTERE
■■Picture Mode t
Select your preferred picture type.
NN When an input source is set to PC, the Picture Mode is only available the Standard and Entertain.
•Dynamic: Suitable for a bright room.
•Standard: Suitable for a normal environment.
• Natural for LED TV / Relax for PDP TV : Suitable for reducing eye strain.
•Movie: Suitable for watching movies in a dark room.
•Entertain: Suitable for watching movies and games.
Return
How to search a keyword by using index page
This function may not be supported depending on the language.
1.If you want to search a keyword, press the u/ d/ l/ rbutton to select Index.
2.Press the lor rbutton to select a character order you want, and then press the ENTEREbutton.
3.Press the uor dbutton to select a keyword you want to see, and then press the ENTEREbutton.
4.You can view the corresponding e-Manual instruction screen.
To close the Index screen, press the RETURN button.
English - 15
Installing the Wall Mount
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.
Preparing before installing Wall-Mount
If you attched some stickers on the TV screen, it remains some debris after removing the sticker. Please clean it to watch TV.
Case A. Installing the SAMSUNG Wall-Mount |
Case B. Installing another company’s Wall-Mount |
To install a wall-mount, use the Holder-Ring 1.
English - 16
Wall Mount Kit Specifications (VESA)
The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
NOTE
xx Standard dimensions for wall mount kits are shown in the table below.
xx When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
xx Do not use screws that do not comply with the VESA standard screw specifications.
xx Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the TV set.
xx For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on the wall mount specifications.
xx Do not fasten the screws that are too strongly; this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.
xx Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.
xx Do not mount the TV at more than a 15 degree tilt.
Product Family |
inches |
VESA Spec. (A * B) |
Standard Screw |
Quantity |
|
|
|
|
|
|
19~22 |
75 X 75 |
M4 |
|
|
|
|
|
|
|
23~27 |
200 X 100 |
|
|
|
|
|
||
LED-TV |
|
|
|
4 |
32~40 |
200 X 200 |
|
||
|
|
|
|
|
|
46~55 |
400 X 400 |
M8 |
|
|
|
|
|
|
|
60~65 |
600 X 400 |
|
|
|
|
|
|
|
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.
English - 17
Troubleshooting
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www. samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual.
Issues |
Solutions and Explanations |
The TV won’t turn on. |
• Make sure the AC power cord is securely plugged in to the wall outlet and the TV. |
|
• Make sure the wall outlet is working. |
|
• Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns |
|
on, refer to “Remote control does not work” below. |
|
|
There is no picture/video. |
• Check cable connections (remove and reconnect all cables connected to the TV and external |
|
devices). |
|
• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections |
|
to the TV input. For example, if an external device’s output is HDMI, it should be connected to an |
|
HDMI input on the TV. |
|
• Make sure your connected devices are powered on. |
|
• Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control. |
|
• Reboot the connected device by reconnecting the device’s power cable. |
|
|
The remote control does not work. |
• Replace the remote control batteries with the poles (+/–) in the right direction. |
|
• Clean the sensor’s transmission window on the remote. |
|
• Try pointing the remote directly at the TV from 5~6 feet away. |
|
|
The cable/set top box remote control |
• Programme the Cable/Set remote control to operate the TV. Refer to the Cable/Set user manual for |
doesn’t turn the TV on or off, or adjust the |
the SAMSUNG TV code. |
volume. |
|
|
|
This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com → Support → Downloads) by USB.
Licence
List of Features
Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed without a cable box / STB (Set-Top-Box) satellite receiver.
SMART HUB
The Gateway to all content integrated in one place
•• It’s all integrated to guide you to easier and diverse entertainment choices
•• Control your entertainment life with easy and simple user friendly UI
•• Access to diverse Apps that are adding up every day
•• Customize your TV, by App grouping & sorting to your taste
AllShare™
AllShare™ connects your TV and compatible Samsung mobile phones/devices through a network.
Anynet+(HDMI-CEC)
Allows you to control all connected Samsung devices that support anynet+ with your Samsung TV’s remote.
English - 18
Securing the TV to the wall
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided in the included Safety Flyer. For added stability and safety, install the anti-fall device as follows.
To Avoid the TV from Falling
1.Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly installed onto the wall.
You may need additional material such as an anchor depending on the type of wall.
Since the necessary clamps, screws, and string are not supplied, please purchase these additionally.
2. Remove the screws from the back centre of the TV, put the screws into the clamps, and then fasten the screws onto the TV again.
Screws may not be supplied with the product. In this case, please purchase the screws of the following specifications.
Screw Specifications
xx For a 19 ~ 27 inch: M4 |
Wall |
|
|
xx For a 32 ~ 65 inch: M8 |
|
3.Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong cable and then tie the string tightly.
NOTE
xx Install the TV near to the wall so that it does not fall backwards.
xx It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV.
xx Untie the string before moving the TV.
4.Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you have any doubt about the security of your connections, contact a professional installer.
Storage and Maintenance
If you attached some stickers on the TV screen, it remains some debris after removing the sticker. Please clean it to watch TV.
Do not spray water or a cleaning agent directly onto the product. Any liquid that goes into the product may cause a failure, fire, or electric shock.
Clean the product with a soft cloth dapped in a small amount of water.
English - 19
|
Specifications |
|
|
|
|
|
|
Display Resolution |
1920 x 1080 |
|
|
|
|
|
|
Environmental Considerations |
|
|
|
Operating Temperature |
10°C to 40°C (50°F to 104°F) |
|
|
Operating Humidity |
10% to 80%, non-condensing |
|
|
Storage Temperature |
-20°C to 45°C (-4°F to 113°F) |
|
|
Storage Humidity |
5% to 95%, non-condensing |
|
|
|
|
|
|
TV System |
Analogue: B/G, D/K, L, I (Depending on your country selection) |
||
|
Digital: DVB-T/DVB-C |
|
|
Colour/Video System |
Analogue: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60 |
||
|
Digital: MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, MP@L4.0, HP@L4.0 |
||
|
|
|
|
Sound System |
BG, DK, L, NICAM, MPEG1, DD, DD+, HEAAC. |
||
|
|
|
|
HDMI IN |
Video: 1080 24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i |
||
|
Audio: 2Ch Linear PCM 32/44.1/48kHz, 16/20/24bits. |
||
Stand Swivel (Left / Right) |
-20˚ ~ 20˚ |
|
|
|
|
|
|
Model Name |
UE32D5500 |
|
UE37D5500 |
|
UE32D5520 |
|
UE37D5520 |
Screen Size |
32 inches |
|
37 inches |
Sound |
|
|
|
(Output) |
10 W X 2 |
|
|
|
|
|
|
Dimensions (WxDxH) |
|
|
|
Body |
768.0 X 29.9 X 468.2 mm |
|
890.6 X 29.9 X 537.4 mm |
With stand |
768.0 X 240.0 X 532.1 mm |
|
890.6 X 255.0 X 602.1 mm |
Weight |
|
|
|
Without Stand |
7.4 kg |
|
9.2 kg |
With Stand |
10.2 kg |
|
12.5 kg |
|
|
|
|
Model Name |
UE40D5500 |
|
UE46D5500 |
|
UE40D5520 |
|
UE46D5520 |
Screen Size |
40 inches |
|
46 inches |
|
|
|
|
Sound |
|
|
|
(Output) |
10 W X 2 |
|
|
Dimensions (WxDxH) |
|
|
|
Body |
955.8 X 29.9 X 574.0 mm |
|
1091.8 X 29.9 X 650.4 mm |
With stand |
955.8 X 255.0 X 638.5 mm |
|
1091.8 X 275.0 X 714.8 mm |
|
|
|
|
Weight |
|
|
|
Without Stand |
11.1 kg |
|
13.7 kg |
With Stand |
14.4 kg |
|
17.3 kg |
Design and specifications are subject to change without prior notice.
For information about power supply, and more about power consumption, refer to the label attached to the product.
English - 20
This page is intentionally left blank.
Pour plus d’informations sur l’utilisation du manuel électronique (p. 14)
Les figures et illustrations contenues dans ce mode d’emploi sont fournies pour référence uniquement. Elles peuvent différer de l’aspect réel du produit. La conception et les spécifications du produit sont susceptibles d’être modifiées sans préavis.
Avis concernant le téléviseur numérique
1.Les fonctions relatives au téléviseur numérique (DVB) ne sont disponibles que dans les pays ou régions où des signaux terrestres numériques de type DVB-T (MPEG2 et MPEG4 AVC) sont diffusés ou dans lesquels vous avez accès à un service de télévision par câble compatible DVB-C (MPEG2 et MPEG4 AAC). Consultez votre distributeur local pour connaître les possibilités en matière de réception des signaux DVB-T ou DVB-C.
2.DVB-T est la norme du consortium européen pour la diffusion de signaux terrestres de télévision numérique. La norme DVB-C est quant à elle prévue pour la diffusion des signaux de télévision numérique par câble. Certaines fonctions particulières, telles que le guide électronique des programmes (Electric Program Guide - EPG) ou encore la vidéo à la demande (Video On Demand - VOD), ne sont toutefois pas incluses dans cette spécification. Dès lors, elles ne seront pas traitées pour l’instant.
3.Bien que ce téléviseur soit conforme aux dernières normes DVB-T et DVB-C (août 2008), il n’est pas garanti qu’il soit compatible avec les futures diffusions de signaux numériques terrestres DVB-T et par câble DVB-C.
4.En fonction du pays ou de la région où vous vous trouvez, certains opérateurs de télévision par câble peuvent facturer des frais supplémentaires pour un tel service. Vous devrez aussi peut-être accepter les termes et conditions de ces sociétés.
5.Il se peut que certaines fonctions de TV numérique ne soient pas disponibles dans certains pays ou certaines régions et que la réception des signaux DVB-C ne soit pas correcte avec tous les opérateurs.
6.Pour plus d’informations, contactez le service client local de Samsung.
Les différentes méthodes de diffusion adoptées en fonction des pays peuvent affecter la qualité de réception du téléviseur. Vérifiez le fonctionnement du téléviseur chez votre revendeur agréé SAMSUNG ou contactez le centre d’appel de Samsung pour savoir s’il est possible d’en améliorer les performances en reconfigurant les réglages.
Avertissement d’image fixe
Evitez d’afficher sur l’écran des images fixes (telles que des photos au format JPEG) ou des éléments d’images fixes (tels que des logos de programmes TV, un format d’image 4:3 ou panoramique, des bandeaux d’actualités ou d’informations boursières au bas de l’écran, etc.). L’affichage permanent d’images fixes risque, en effet, d’entraîner l’apparition d’images fantôme à l’écran, ce qui peut se traduire par une dégradation de la qualité d’image. Pour atténuer les risques, suivez scrupuleusement les recommandations suivantes :
•Evitez d’afficher longuement la même chaîne de télévision.
•Essayez toujours d’afficher l’image en plein écran ; pour obtenir une correspondance optimale, utilisez le menu de format d’image du téléviseur.
•Réduisez les valeurs de luminosité et de contraste sur le minimum requis pour obtenir la qualité d’image souhaitée. L’utilisation de valeurs trop élevées risque d’accélérer le processus de brûlure.
•Utilisez fréquemment toutes les fonctions du téléviseur conçues pour réduire le phénomène de rémanence et la brûlure d’écran. Pour plus d’informations à ce sujet, consultez la section appropriée du mode d’emploi.
Sécurisation de l’espace d’installation
Maintenez les distances requises entre le produit et les autres objets (par exemple, les murs) afin de garantir une ventilation adaptée.
Le non-respect de ces distances peut provoquer un incendie ou un problème au produit en raison d’une augmentation de la température interne de celui-ci.
Lors de l’utilisation d’un pied ou d’un support mural, utilisez uniquement les pièces fournies par Samsung Electronics.
• L’utilisation de pièces fournies par un autre fabricant peut occasionner un problème au niveau du produit ou la chute de celui-ci, ce qui pourrait vous blesser.
|
|
L’aspect peut varier en fonction du produit. |
|
• Soyez prudent lorsque vous touchez le téléviseur, car certaines parties peuvent être brûlantes. |
|
Installation avec un pied. |
Installation avec un support de montage mural. |
10 cm
10 cm |
10 cm |
|
10 cm |
10 cm |
10 cm |
|
10 cm |
Les bons gestes de mise au rebut de ce produit (Déchets d’équipements électriques et électroniques) (Applicable dans les pays de l’Union Européenne et dans d’autres pays européens pratiquant le tri sélectif)
Ce symbole sur le produit, ses accessoires ou sa documentation indique que ni le produit, ni ses accessoires électroniques usagés (chargeur, casque audio, câble USB, etc.) ne peuvent être jetés avec les autres déchets ménagers. La mise au rebut incontrôlée des déchets présentant des risques environnementaux et de santé publique, veuillez séparer vos produits et accessoires usagés des autres déchets. Vous favoriserez ainsi le recyclage de la matière qui les compose dans le cadre d’un développement durable. Les particuliers sont invités à contacter le magasin leur ayant vendu le produit ou à se renseigner auprès des autorités locales pour connaître les procédures et les points de collecte de ces produits en vue de leur recyclage. Les entreprises et professionnels sont invités à contacter leurs fournisseurs et à consulter les conditions de leur contrat de vente. Ce produit et ses accessoires ne peuvent être jetés avec les autres déchets professionnels et commerciaux.
Elimination des batteries de ce produit
(Applicable aux pays de l’Union européenne et aux autres pays européens dans lesquels des systèmes de collecte sélective sont mis en place.)
Le symbole sur la batterie, le manuel ou l’emballage indique que les batteries de ce produit ne doivent pas être éliminées en fin de vie avec les autres déchets ménagers. L’indication éventuelle des symboles chimiques Hg, Cd ou Pb signifie que la batterie contient des quantités de mercure, de cadmium ou de plomb supérieures aux niveaux de référence stipulés dans la directive CE 2006/66. Si les batteries ne sont pas correctement éliminées, ces substances peuvent porter préjudice à la santé humaine ou à l’environnement. Afin de protéger les ressources naturelles et d’encourager la réutilisation du matériel, veillez à séparer les batteries des autres types de déchets et à les recycler via votre système local de collecte gratuite des batteries.
Français - 2
Accessoires
Vérifiez que les éléments suivants sont inclus avec votre téléviseur. S’il manque des éléments, contactez votre revendeur.
Les couleurs et les formes des éléments peuvent varier en fonction des modèles.
Les câbles qui ne se trouvent pas dans le contenu de l’emballage peuvent être achetés séparément.Vérifiez qu’aucun accessoires n’est caché dans l’emballage lorsque vous ouvrez la boîte.
[[ATTENTION : INSEREZ FERMEMENT DE MANIERE A CE QU’IL NE SE DETACHE PAS
•• Télécommande et piles (AAA x 2) |
•• |
Câble d’alimentation |
|
•• |
Manuel d’utilisation |
•• |
Tissu de nettoyage |
•• |
Carte de garantie (non disponible dans certains pays) / Manuel de sécurité |
Anneau de support (4ea) |
Support du serre-câble |
Adaptateur de carte CI |
|||
|
|
|
|
|
|
|
|
|
|
|
|
AV/Adaptateur composant |
Adaptateur Scart |
•• Des frais d’administration peuvent vous être facturés si :
––(a) un technicien intervient à votre demande et que le produit ne comporte aucun défaut (c.-à-d. si vous n’avez pas pris la peine de lire le présent manuel d’utilisation)
––(b) vous amenez le produit dans un centre de réparation alors qu’il ne comporte aucun défaut (c.-à-d. si vous n’avez pas pris la peine de lire le présent manuel d’utilisation).
•• Le montant de ces frais d’administration vous sera signifié avant la réalisation de toute prestation ou visite à domicile.
Installation du support du serre-câble
Français - 3
Présentation du panneau de configuration
La couleur et la forme du produit peuvent varier en fonction du modèle.
Capteur de la télécommande
Témoin d’alimentation
SOURCEE
MENU
Y
z
P(Alimentation)
Mode Veille
Panneau de configuration
Dirigez la télécommande vers ce point du téléviseur.
Clignote, puis s’arrête lorsque le téléviseur est allumé. S’allume en mode Veille.
Bascule entre toutes les sources d’entrée disponibles. Dans le menu du téléviseur, ce bouton a la même fonction que le bouton ENTERE de la télécommande.
Affiche un menu à l’écran OSD (on screen display) reprenant les fonctions de votre téléviseur.
Règle le volume. Dans le menu à l’écran (OSD), utilisez les boutons Yde la même façon que les boutons ◄ et ► de la télécommande.
Permet de modifier les chaînes. Dans le menu à l’écran (OSD), utilisez les boutons zde la même façon que les boutons ▼ et ▲ de la télécommande.
Permet d’allumer et d’éteindre le téléviseur.
Ne laissez pas le téléviseur en mode Veille pendant de longues périodes (lorsque vous partez en vacances, par exemple). Même s’il est en veille, l’appareil consomme toujours une petite quantité d’énergie. Il est préférable de débrancher le cordon d’alimentation.
Français - 4