OWNER’S
INSTRUCTIONS
AWT18Q1HDA
AWT17Q1H***/XTL
AWT18Q1H***/XTL
Window-type Room Air Conditioner
(Cool)
E DB98-15142A(1)
The following safety precautions must be taken when using your air conditioner.
1 The unit must be plugged into an independent circuit.
The air conditioner must be installed in accordance with national wiring regulations and safety regulations wherever applicable.
2 Some installation locations may require installation of a short circuit breaker or grounding.
3 If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.
4MAKE sure that the unit is correctly ventilated at all times ; do NOT place clothing or other materials over it.
5NEVER spill any kind of liquid into the unit. Should this happen, unplug the unit and contact an authorized service center.
6Do NOT insert anything between the air outlet blades because the inner fan may be damaged and could cause injury. Keep children away from the unit.
7Do NOT place any obstacles in front of the unit.
8Users of this product are cautioned not to attempt repairs.
Instead, they are requested to directly contact a designated service center or the outlet at which the product was purchased.
9Do not use an extension cord with this product.
10The appliance is not intended for use by young children without supervision ;
young children should be supervised to ensure that they do not play with the appliance.
11Never store or ship the air conditioner upside down or sideways to avoid damage to the compressor.
12Max current is measured according to IEC standard for safety
and current is measured according to ISO standard for energy efficiency.
CAUTION
The manufacturer does not assume responsibility for accidents or injury caused by an incorrectly installed air conditioner. If you are unsure about installation, contact an installation specialist.
E-2
|
Contents |
|
PREPARING YOUR AIR CONDITIONER |
|
|
■ |
Safety Precautions ......................................................................................... |
2 |
■ Air Conditioning Unit - Main Parts and Control Panel .................................... |
4 |
|
OPERATING YOUR AIR CONDITIONER |
|
|
■ |
Cooling Your Room ........................................................................................ |
5 |
■ |
Airing Your Room ........................................................................................... |
6 |
■ Switching the Air Conditioner Off .................................................................... |
6 |
|
■ Adjusting the Air Flow Direction Horizontally .................................................. |
7 |
|
■ Adjusting the Air Flow Direction Vertically ...................................................... |
7 |
|
RECOMMENDATIONS FOR USE |
|
|
■ |
Operating Recommendation ........................................................................... |
8 |
■ Temperature and Humidity Ranges ................................................................ |
8 |
|
■ |
Cleaning Your Air Conditioner ........................................................................ |
9 |
■ |
Solving Common Problems ............................................................................ |
10 |
■ |
Technical Specifications ................................................................................. |
11 |
INSTALLATION ....................................................................................................... |
12 |
The illustrations in the step-by-step procedures use four different symbols:
PRESS |
PUSH |
IMPORTANT |
NOTE |
E-3
Air Conditioning Unit - Main Parts and Control Panel
The design and shape are subject to change according to the model.
Air inlet (Inside)
Air filter (The air filter is located in inside.)
Inner air flow blades (right/left orientation)
Outer air flow blades (up/down orientation)
Air inlet
Air outlet
Ventilation lever
BLUE BROWN YELLOW/GREEN
Main Power Earth
Power cable connection should be committed to an installation engineer.
Operating mode |
Temperature |
selection dial |
control dial |
Air flow blade swing switch
E-4
You must select the Cool mode if you wish to lower the temperature in your room. You can also set the fan speed.
1Select the operating mode and fan speed.
To cool your room with a... Set the operating mode
|
|
selection dial to... |
|
|
Turbo fan speed |
Turbo Cool |
|
|
|
|
|
|
Between Turbo and Quiet |
High Cool |
|
|
|
|
|
|
Quiet fan speed |
Quiet Cool |
|
|
|
|
|
Result: The air conditioner starts up in Cool mode.
The fan starts up at the speed selected.
You can change modes at any time.
2To adjust the temperature, turn the temperature control dial to the desired position.
Possible temperatures: Between 18°C and 29°C inclusive.
Result: The air conditioner starts cooling if the room temperature is higher than the selected temperature.
27˚C ~ 23˚C
29˚C |
23˚C |
~ 27˚C |
~ 18˚C |
3 To control the direction of the air flow, refer to page 7.
E-5