Samsung AW18PHBC, AW12PHBA, AW18PHBA, AW12PHBC, AW18PHB Manual

USER'S MANUAL

AW08PH Series

AW08PK Series

AW12PH Series

AW12PK Series

AW18PH Series

AW18PK Series

AW24PH Series

AW24PK Series

AW122PB

Window-type Room Air Conditioner (Cooling)

E S DB98-26004A(4)

Register your product at www.samsung.com/global/register

Safety Precautions

The following safety precautions must be taken when using your air conditioner.

	WARNING		Risk of electric shock. • Can cause injury or death. • Disconnect all
			remote electric power supplies before servicing, installing or cleaning.
			• This must be done by the manufacturer or its service agent or a similar
			qualified person in order to avoid a hazard.

DURING OPERATION

DISPOSING OF THE UNIT

OTHERS

uUsers of this product are cautioned not to attempt repair of this product at their own discretion. Instead, they are requested to directly contact a designated service center or the outlet at which the product was purchased.

uNever spill any kind of liquid into the unit. Should this happen, unplug or main switch off the unit and contact an authorized service center.

uDo not insert anything between the air outlet blades because the inner fan may be damaged and could cause injury. Keep children away from the unit.

uDo not place any obstacles in front of the unit.

uDo not spray liquid of any kind into the indoor unit. Should this happen, switch off the breaker used for your air conditioner and contact your installation specialist.

uMake sure that the unit is correctly ventilated at all times: Do not place clothing or other materials over it.

uIf the wireless remote control will not be used for a long time, remove the batteries. (If applicable)

uWhen using a wireless remote control, the distance should not be more than 7 meters from the air conditioner. (If applicable)

uThe air conditioner must be plugged into its own specific power source, which must be installed in compliance with national wiring,earthing and safety regulations.

uIf the power cord is damaged in any way, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

uThis device must be installed according to the national electrical rules.

uThe appliance must be installation that the plug should be easily accessible after installation.

uIf the fuse on PC board is broken please change it with the type of T 3.15A 250V.

uThe breaker of the air conditioner should be all-pole switch; and the distance between its two contacts should be no less than 3.5mm. Such means for disconnection must be incorporation in the fixed wiring.

uBefore throwing out the device, it is necessary to pull back the battery cells and get rid of them safely for recycling reasons.

uWhen you need to dispose of the unit, consult your dealer. If pipes are removed incorrectly, refrigerant may blow out and come into contact with your skin,causing injury. Releasing refrigerant into the atmosphere also damages the environments.

uPlease recycle or dispose of the packaging material for this product in an environmentally responsible manner.

uNever store or ship the air conditioner upside down or sideways to avoid damage to the compressor.

uThe appliance is not intended for use by young children or infirm persons without supervision: Young children should be supervised to ensure that they do not play with the appliance.

uMax current is measured according to IEC standard for safety and current is measured according to ISO standard for energy efficiency.

E-

		Contents
 PREPARING YOUR AIR CONDITIONER
	n	Safety Precautions.........................................................................................	2
	n Air Conditioning Unit-Main Parts, Buttons and Display.................................		4
	n	Remote Control-Buttons................................................................................	5
	n	Getting Started...............................................................................................	6
	n Inserting the Remote Control Batteries ........................................................		7
 OPERATING YOUR AIR CONDITIONER
	n	Cooling Your Room........................................................................................	8
	n	Airing Your Room...........................................................................................	9
	n	Removing Excess Humidity...........................................................................	10
	n Adjusting the Air Flow Direction Horizontally.................................................		11
	n Adjusting the Air Flow Direction Vertically.....................................................		11
 PROGRAMMING YOUR AIR CONDITIONER
	n Setting the On Timer......................................................................................		12
	n Setting the Off Timer......................................................................................		13
	n Selecting Good Morning mode.........................................................................		14
	n Selecting Energy saving mode......................................................................		15
	RECOMMENDATIONS FOR USE
	n Temperature and Humidity Ranges...............................................................		15
	n Cleaning Your Air Conditioner.......................................................................		16
	n	Solving Common Problems...........................................................................	17
	n	Technical Specifications...................................................................................	18
	INSTALLATION.............................................................................................		19

CAUTION

“The high inrush current of the starting compressor motor can have adverse effects to the operation of other equipment under unfavorable mains conditions. This equipment does not comply with the relevant technical standards for the limitation of voltage fluctuations and flicker.”

Before connection this equipment to the power supply system, please report to your suply authority and obtain the consent.

Do not connect other electric appliances to the same supply lines.

AW18

The maximum permissible system impedance at the power junction box is 0.24 ohms. Usually, the maximum permissible mains impedance will not be exceeded when the branch to the power outlet is fed from a junction box with a rated current of 32A.

E-

Air Conditioning Unit - Main Parts, Buttons and Display

The design and shape are subject to change according to the model.

Air Outlet
	Inner air flow blades
	(right/left orientation)
Air inlet (Inside)	Outer air flow blades
	(up/down orientation)
The air filter is
located in side	Air inlet (Outside)
	Ventilation lever
	 The power plug may be not supplied
	depending on the model.
	The type of the power plug
Power plug	may differ according to the
	type of local power supply.

Temperature/

Operating mode indicators

Timer setting

(COOL, DRY,FAN)

Temperature adjustment

Good Morning setting button

buttons

Timer setting button

Energy Saver indicator

Timer indicator

Remote Control sensor

Good Morning indicator

Air flow blade

Operating mode selection

button (COOL,DRY, FAN)

swing button

Energy Saver button

Fan speed adjustment

button

On/Off button

E-

Remote Control - Buttons

Timer setting button
Selecting Good Morning	Temperature adjustment
	button
button
Operating mode	Fan speed adjustment
selection button	button

Energy Saver button
Air flow blade swing button	On/Off button

E-

Getting Started

You have just purchased a window-type room air conditioner and it has been installed by your installation specialist.

Your Owenr’s Instructions contain valuable information on using your air conditioner.

Please take the time to read them as they will help you take full advantage of the unit’s functions.

This Owner’s Instructions is just for using your air conditioner correctly.

Thus, the illustrations shown in this manual may not exactly match your air conditioners. The booklet is organized as follows.

The following figures are shown on pages 4 and 5:

-Air conditioning unit (main parts, buttons and display)

-Remote control (buttons)

They will help you find the buttons and understand the symbols displayed.

 In the manual, you will find a series of step-by-step procedures for each function available. The illustrations in the step-by-step procedures use four different symbols:

 

PRESS

PUSH

IMPORTANT

NOTE

Moreover,applicable, wherever the illustrations show the positions of the buttons on both the remote control and the unit itself.

For the...	The illustrations have a...
Remote control	Gray background.
	Example:
Unit itself	White background.
	Example:

E-

Inserting the Remote Control Batteries

You must insert or replace the remote control batteries when:

You purchase the air conditioner

The remote control does not work correctly

Use two AAA, LR03 1.5V batteries. Do not use old batteries or different kinds of batteries together.

Batteries may be completely discharged after 12 months, even if they have not actually been used.

1Push the battery cover on the rear of the remote control with your thumb in the direction of the arrow and remove it.

2Insert the two batteries,taking care to respect the polarities:  + on the battery with + on the remote control

 - on the battery with - on the remote control

3Close the cover by sliding it back unitl it clicks into place.

Result: You can control all the functions your air conditioning unit directly from your seat, using the remote control.

E-