Phil & Teds E3 User Manual

compact package

brands and car seats too.
E3 buggy harness, most other
for up to 3 year olds. slotted to fit
buggies and great for sleep overs
Sleeping Bags - Made to fit our

Dacron inner with removable head support.

fleece one side and cool cotton the other.

Buggy Bunny - Comfy buggy liner with warm

for your little girl or boy racer. Start your engines!

The Race Seat - Breathable, padded contoured support

Take your buggy near or far in an easy

E3 Travel bag - now with wheels and a carry loop.

Lambskin Liner Sleeping bag Buggy Bunny

offer. Factory sanitised. Shaped and slotted for the buggy harness and coloured in stylish two tone.
The fitted Lambskin - Pure and natural warmth, comfort and protection that only the finest lambskin can

right to charge for ‘policy exclusions’ and freight back to the consumer.

quick getaways & when folding buggy.
Remove parcel tray contents without hassle - great for
Parcel tray packing cell - This is so handy.

capsule brands.
most major car
while sleeping. Fits
from car to buggy
Baby can go easily

Travel System

on arrival for sleep and play.
Face baby toward or away from you. Un-zip
buggy. Use the safety buckles to secure.
newborn baby and lift out undisturbed from the
The Cocoon - Cradle your sleeping

accessories incorrectly fitted or adjusted, brakes not applied.
left unattended, locking devices not engaged properly, safety harness not used, excessive load,
Improper use (by way of example only: abnormal use, not following instructions, abuse, child
Normal wear and tear, tyres (inc. punctures), fabric colour fastness, hand grip, fabric cuts.
Poorly maintained product
Modified product

being followed.

Accessories

consumer may have additional rights in some countries or states.
directly or indirectly resulting from the use of this product is expressly excluded from this warranty. The
of the product from an authorised distributor. Proof of purchase is required. Any consequential loss or damage
its costs to the manufacturer for warranty claims. This warranty is only f or the benefit of the original purchaser
instructions being followed, otherwise this warranty is invalid. The customer is responsible for delivery and
The product must be used at all times in normal conditions, satisfactorily maintained and with the manufacturer’s
normal wear and tear, the tyres, the handgrip or punctures. This warranty is for 1 year from date of purchase.
The warranty protects the original purchaser against faulty workmanship and faulty items. This does not cover

Form of Warranty

manufacturer or its agent for warranty claims.
that the customer is responsible for arranging delivery and any inward freight charge to the

Wellington, 06002, New Zealand. Tel + 64 4 3800 833 or email [e-mail]. Please note
Contact Phil & Teds for the details of your nearest place of service - 102 Daniell Street, Newtown,

Place of service

Requirements: Completed service form.
Basis: Manufacturer (or agent) will repair or replace at its option. Manufacturer (or agent) reserves the

Warranty: charge and parts and labour may be payable.
Service outside Where proof of purchase not provided or beyond time validity - a reasonable service

Policy exclusions: Second hand sales
Claims: Contact retailer or the manufacturer (or agent).
Limitations: Any consequential loss or damage directly or indirectly as a result of using the product.
warranty or service; in addition, a service charge may apply (agreed at time with consumer).
Customer costs: The customer is responsible delivery and its costs to the manufacturer or its representative for

Validity of use: Must be used at all times in normal conditions, properly maintained and with the instructions
Validity of time: 1 year from date of purchase.
What is covered: Workmanship or materials that are faulty.
Who is covered: Original purchaser buying new product from authorised dealer. Proof of purchase is required

Details of warranty

we will happily repair it for a reasonable charge.
it. If the products fail due to wear and tear, accident or negligence, or if it is outside the warranty period
manufacturing fault we will repair it free of charge. If it is not practical for us to repair it we will replace
against defects in materials and workmanship for the warranty period. If the product fails due to a
We want to give owners confidence in the quality of all Phil & Teds products. They are fully warranted

Our Warranty and service policy

Warranty and Service

to BS 6684
If required, use the D-rings on the waist strap to attach and safety harness conforming

!

WARNING: The stroller should not be used near and open fire or exposed flame.
WARNING: Care should be taken if stroller is used on stairs or escalators.

!

for it. They may be unsafe.
being in the front seat. Do not modify the buggy or use accessories not designed
WARNING: Do not push a child in the rear seat of a buggy without a heavier child

!

weight of 23kg/50lbs (4 years and 35kg/70lbs for doubles buggy).

!

WARNING: The single buggy is intended for children up to 4 years or maximum
or unloading children.
WARNING: Apply brakes when you park the buggy. Apply brakes when loading

!

erecting or adjusting the buggy.
fitted, adjusted and securing child firmly. Make sure children are clear before folding,
harness. Always secure all safety harness straps. Ensure the safety harness is corr ectly
WARNING: Avoid serious injury from falling or sliding out. Always use safety

!

place more than 3kg/7lbs in the parcel tray. This may damage the vehicle.
on the seat. Do not carry extra weight over that allowed by the instructions. Do not
not hang luggage or carry extra children on the buggy. Do not allow a child to stand
WARNING: Any load attached to the handle affects the stability of the vehicle. Do

!

WARNING: Ensure that all locking devices are engaged before use.

!

in the buggy.
WARNING: Never leave children unattended. Take extra care with any child asleep

!

improper use.
Injury may result if you do not follow all safety precautions. Injury may result from

Explorer Buggy Warnings and Safety Notices

notices. This is extremely important.
Safety Notices Ensure you read carefully all the safety information and warning

operation and use depends on carefully following these instructions
Product Instructions Make sure you have the relevant product instructions. Safe

information and acts as a proof of purchase.

Warranty Card Please fill out and mail us your warranty card. This gives us helpful

Safety and Product Care

Caring for your Explorer

Fabric care and cleaning

The fabric is backed with a water-resistant coating. Brush off dirt. More intense
cleaning can be done by hand, in warm water, using a mild natural soap. Rinse out
soap. Do not use detergents or bleach. Air dry. The fabric is fade resistant but not
fade proof; exposure to direct sunlight can fade the fabric.

Frame care and cleaning

We recommend that dirt is brushed off the frame and wheels regularly. Clean with
a non-abrasive household cleaner and soft cloth. Wash off sand and salt after beach
activity. Always dry frame if wet.

Tyres & inner tube

The valve is car-size. We recommend 20 - 22 psi. Releasing air gives a softer ride,
but lower pressure reduces tread life. New inner tubes and tyres are generally
available (2.5 x 12.5 inch tyre) from your dealer, cycle or specialist wheel shops.
Standard tyre kits can repair punctures. A flat tyre can result from grit holding the
valve open; to check, inflate tyre, deflate rapidly, and re-inflate. Tyres and tubes are
not under warranty.

Rubber covers & grip

Take care to avoid damage to the foam rubber. To replace: undo snaps; depress the
nib springs and remove frame part. Replace, using soapy water for lubrication. R eplace
frame part; ensure nib springs engage. The foam rubber is not under warranty.

Routine inspection and maintenance

Moving parts may need periodic lubrication. Inspect essential components for fraying
(esp. webbing straps and safety harness), wear (esp. auto-locks, snap fasteners,
button springs, tyres, plastic parts, zips and moving parts), security (esp. autolocks
and caps which must not be loose) and freedom of movement (esp. wheels, nuts).
Excessive wear can reduce effectiveness and safety.

E3 Buggy Instructions

Dear E3 Buggy Owner
Thank you for purchasing the fabulous E3 Buggy . We trust you’ll get a

great deal of enjoyment and use from it. We really value customer
feedback so, if you have any comments, please contact us. Don’t forget
to complete your warranty form and mail it.

The Most Excellent Team

These instructions are important...

Read these instructions carefully before use and keep them for future
reference. Your child’s safety is your responsibility and may be affected
if you do not follow these instructions. Safe operation depends on careful
adherence to the instructions outlined in this manual. Please study them
and contact us if you are unsure. Read carefully the W ARNINGS detailed
inside and on the buggy. They are for your safety and information.

Warranty registration

Return your warranty response form for validation. If your product has
a problem or you are concerned about any aspect of its performance
then please contact your Most Excellent Dealer or Phil & Teds Most
Excellent Buggy Co. Ltd. We keep your warranty record on file, which
allows us to contact you if needed.

BS 7409:1996; AS/NZS 2088:2000; ASTM F833-01.

TM

Issue V (E3V2) 22 February 2004