O P E R A T I O N / P R O G R A M M I N G
|
ExSite™ Explosionproof |
|
EHXM Series |
® |
Fixed Mount System |
|
|
C1301M (6/05)
Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
How to Operate Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
7 |
Accessing Main Menu (Preset 95). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
8 |
CM6700/CM6800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
8 |
KBD200A/KBD300A (Direct Mode Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
8 |
CM9500. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
8 |
CM9700 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
8 |
KBD4000/KBD4002. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
8 |
MPT9500. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
8 |
NET300/NET350/NET4001A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
8 |
Quick Start Guide – System Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
9 |
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Display Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Label Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Unit Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Type of Lighting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Auto Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Zoom Limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Zoom Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Low Light Limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
IR Cut Filter (23X Day/Night Camera). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Advanced Camera Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Shutter Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
AGC Limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Auto Iris. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Auto Sharpness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Auto White Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Backlight Compensation (BLC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Video Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Wide Dynamic Range (23X Day/Night Camera). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Other . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Park Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Power Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Power Up Action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Line Sync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Enable Motion Detection (23X Day/Night Camera) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Edit Detection Areas (23X Day/Night Camera) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Activate AUX Command (23X Day/Night Camera). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
AUX Time (23X Day/Night Camera) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Window Blanking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Reverse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Clear Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
C1301M (6/05) |
3 |
Wiper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Wiper Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Wiper Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Wiper Dwell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Wiper Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Set Washer Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Aux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Reset, Cycle Power, Reboot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Reset Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Cycle Camera Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Reboot System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Software/Language File Upload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Upload Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
4 |
C1301M (6/05) |
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RADIO AND TELEVISION INTERFERENCE
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and the receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
You may also find helpful the following booklet, prepared by the FCC: “How to Identify and Resolve Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington D.C. 20402.
Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commission’s rules.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
C1301M (6/05) |
5 |
Thank you for purchasing Pelco’s ExSite™ EHXM Series explosionproof system. Your new system features a high resolution camera/optics package with programmable software.
This manual is designed to be a reference tool for the operation and programming of your system. Inside you will find information about the features and commands of your EHXM system, as well as a detailed menu tree.
EHXM30C22-2 Fixed IOP system with color camera, 60 Hz, 24 VAC
EHXM30C22-2X Fixed IOP system with color camera, 50 Hz, 24 VAC
EHXM31C22-2 Same as EHXM30C22-2, except supplied with window wiper
EHXM31C22-2X Same as EHXM30C22-2X, except supplied with window wiper
EHXM30CBW23-2 Fixed IOP system with day/night camera, 60 Hz, 24 VAC
EHXM30CBW23-2X Fixed IOP system with day/night camera, 50 Hz, 24 VAC
EHXM31CBW23-2 Same as EHXM30CBW23-2, except supplied with window wiper
EHXM31CBW23-2X Same as EHXM30CBW23-2X, except supplied with window wiper
EHXM30C22-7 Fixed IOP system with color camera, 60 Hz, 90-264 VAC
EHXM30C22-7X Fixed IOP system with color camera, 50 Hz, 90-264 VAC
EHXM31C22-7 Same as EHXM30C22-7, except supplied with window wiper
EHXM31C22-7X Same as EHXM30C22-7X, except supplied with window wiper
EHXM30CBW23-7 Fixed IOP system with day/night camera, 60 Hz, 90-264 VAC
EHXM30CBW23-7X Fixed IOP system with day/night camera, 50 Hz, 90-264 VAC
EHXM31CBW23-7 Same as EHXM30CBW23-7, except supplied with window wiper
EHXM31CBW23-7X Same as EHXM30CBW23-7X, except supplied with window wiper
DANGER: Do not connect the power module to a supply circuit unless all ExSite system components (enclosure, camera module and power module) are installed.
You will need to install your system before using this manual. Refer to the installation manuals for installation instructions. Once installed apply power to the system. The system will start a configuration sequence. When configuration is done, the following information is displayed on the monitor:
EXSITE EHXM
Version X.XX
D Address: 1
P Address: 2
Comm 2400, N, 8, 1
CONFIGURE DONE
This information will remain on the monitor until system operation begins. Refer to the following pages to learn how to operate and program your EHXM Series system.
6 |
C1301M (6/05) |
Operation |
How to Control |
Zoom Far |
To zoom far, do the following: |
1.Press the Zoom Tele button or turn the joystick clockwise until zoom stops at the 32X zoom limit.
2.Release the button or joystick for one second.
3.To continue zooming (digitally), press the button or turn the joystick clockwise again until you have the picture you want or reach the digital zoom* limit.
Zoom Wide |
Press the Zoom Wide button or turn the joystick counterclockwise. |
Alarms |
Refer to the Alarms section. |
C1301M (6/05) |
7 |
You can call up the main menu on your monitor by programming (setting or creating) preset 95 (preset 28 if in AD32-preset mode).
Programming preset 95 for Pelco’s controllers varies according to the type of controller you are using. Instructions for programming preset 95 are given below for various Pelco controllers.
CM6700/CM6800
1.Enter the number of the ExSite EHXM system and press the CAM key.
2.Enter 95 and hold the PRESET key for two seconds.
3.In the Edit Preset menu, arrow to SET and press the ACK key. The main menu appears.
1.Enter 95.
2.Hold the PRESET key (approximately five seconds) until the main menu appears on the screen.
CM9500
1.Enter the number of the ExSite EHXM system and press the CAM key. The Main menu appears.
2.Highlight SETUP in the Main menu and press the SELECT key.
3.Highlight CAM in the Setup menu and press the SELECT key.
4.Highlight PRESET in the Camera menu and press the SELECT key.
5.Enter 95 and press the F1 key. The main menu appears.
1.Press the ESCAPE key to open the Main menu. Select DEF. The Define Submenu appears.
2.Enter your four-digit PIN if this is your first time entering this mode.
3.Enter 95 and select PRST. The main menu appears on the monitor.
4.Select the Quit icon to return to the default menu.
KBD4000/KBD4002
1.Press the SPOT MONITOR key.
2.Enter 95, then hold the PRESET key (approximately five seconds) until the main menu appears on the screen.
MPT9500
Standard Coaxitron Mode
1.Enter 95 and press the PRESET SET key.
2.Position the asterisk in the YES row and press the F1 key. The main menu appears.
Extended Coaxitron or RS-485 Mode
1.Enter 95 and press the PRESET SET key.
2.Press the F2 key. The main menu appears.
NET300/NET350/NET4001A
1.Check the Set box.
2.Click the preset 95 button. The main menu appears.
8 |
C1301M (6/05) |
Quick Start Guide – System Setup
Presets
The following presets are reserved for special functions.
Preset Function
86Wiper
87Washer
88IR filter IN (color)
89IR filter OUT (black-white)
95 |
Select main programming menu |
NOTE: For American Dynamics controllers with only 32 presets, switch SW3-1 on the dome drive to the ON position. When SW3-1 is ON, preset
95 becomes 28
89 becomes 22
88 becomes 21
CAMERA |
OTHER |
|
POWER UP |
||
TYPE OF LIGHTING |
|
PARK TIME (MINUTES) |
|
POWER UP ACTION |
|
AUTO FOCUS |
PARK ACTION |
|
|
||
ZOOM LIMIT |
BACK |
|
BACK |
||
ZOOM SPEED |
|
EXIT |
|||
LOW LIGHT LIMIT |
EXIT |
|
|
||
IR CUT FILTER* |
|
|
|
||
AUTO IR LEVEL* |
|
|
|
||
<ADVANCED SETTINGS> |
|
|
|
||
BACK |
|
|
|
||
EXIT |
|
|
|
||
ADVANCED SETTINGS |
|
|
|
||
|
|
|
|
||
SHUTTER SPEED |
|
|
|
|
|
AGC LIMIT |
|
|
|
||
AUTO IRIS |
|
|
|
||
AUTO IRIS LEVEL |
|
|
|
||
AUTO IRIS PEAK |
|
|
|
||
AUTO SHARPNESS |
|
|
|
||
SHARPNESS LEVEL |
|
|
|
||
AUTO WHITE BALANCE |
|
|
|
||
R GAIN |
|
|
|
||
B GAIN |
|
|
|
||
BACKLIGHT COMP |
|
|
|
||
VIDEO LEVEL |
|
|
|
||
WIDE DYNAMIC RANGE* |
|
|
|
||
BACK |
|
|
|
||
EXIT |
|
|
|
ADDITIONAL
FREE MEMORY LAST RESET CAMERA ACTIVE FPGA VERSION VIDEO LEVEL <CAMERA> <EAB>
<PMAB>
LANGUAGE 1
LANGUAGE 2
LANGUAGE 3
LANGUAGE 4
LANGUAGE 5
LANGUAGE 6
LANGUAGE 7
LANGUAGE 8
LANGUAGE 9
LANGUAGE 10
BACK
EXIT
LYNE SYNC
LINE SYNC
LINE SYNC PHASE
BACK
EXIT
*Available only with the 23X day/night camera.
**Available only with wiper models.
PELCO EXSITE EHXM
LANGUAGE
<SYSTEM INFORMATION> <DISPLAY SETUP>
<UNIT SETTINGS>
RESET CAMERA
CYCLE CAMERA POWER REBOOT SYSTEM
EXIT
Quick Programming Guide
Access the main menu (preset 95). Refer to
Accessing Main Menu (Preset 95) section.
Use the joystick to position the cursor beside menu selection. If your controller does not have a joystick, use the up or down key.
SYSTEM INFORMATION |
|
DISPLAY SETUP |
|
LABEL POSITION |
|
UNIT SETTINGS |
UNIT MODEL |
|
PRESET LABEL |
|
[PRESET LABEL- - - ---] |
|
<CAMERA> |
POWER MODULE MEMORY |
|
ZOOM |
|
[ALARM 1- - - - - - -] |
|
<OTHER> |
SOFTWARE VERSION |
|
ALARM MESSAGE |
|
|
|
<POWER UP> |
BIOS VERSION |
|
|
|
SAVE AND EXIT |
|
<LINE SYNC> |
FONT VERSION |
|
<LABEL POSITIONS> |
|
CANCEL AND EXIT |
|
<PRESETS> |
|
|
RESTORE FACTORY DEFAULTS |
|
HELP |
|
<PATTERNS> |
COMM |
|
BACK |
|
|
|
<WINDOW BLANKING> |
D ADDRESS |
|
|
XXX.XXX |
|
<ALARMS> |
|
P ADDRESS |
|
EXIT |
|
|
|
<WIPER> |
CM9500 MODE |
|
|
|
|
|
<AUX> |
32 PRESETS |
|
|
|
|
|
<CLEAR> |
PROTOCOL |
|
|
|
|
|
<PASSWORD> |
<ADDITIONAL> |
|
|
|
|
|
BACK |
BACK |
|
|
|
|
|
EXIT |
|
|
|
|
|
|
|
EXIT |
|
|
|
|
|
|
Press Iris Open; the submenu/cursor moves to the right.
Move the joystick up or down to view selections. If your controller does not have a joystick, use the up or down key.
Press Iris Open to make selection.
Press Iris Close to cancel selection.
PRESETS |
|
PATTERNS |
|
WINDOW BLANKING |
|
ALARMS |
|
WIPER** |
|
AUX |
|
CLEAR |
|
PASSWORD |
|
PRESET NUMBER |
PATTERN NUMBER |
|
STYLE |
|
RESUME |
|
WIPER CONTROL |
|
AUX 1 MODE |
|
CLEAR ALL PRESETS |
|
ENABLE PASSWORD |
||
PRESET NOT DEFINED |
<PROGRAM PATTERN> |
|
<SET WINDOWS> |
|
SEQUENCE (SECS) |
|
WIPER MODE |
|
DWELL TIME (SECS) |
|
CLEAR ALL PATTERNS |
|
<EDIT PASSWORD> |
||
<CLEAR PATTERN> |
|
|
RESET DELAY (SECS) |
|
WIPER DWELL (SECS) |
|
|
|
CLEAR ALL WINDOW BLANKING |
|
|
|
|||
<EDIT PRESET LABEL> |
BACK |
|
BACK |
|
|
|
WIPER TIME (MIN) |
|
AUX 2 MODE |
|
RESTORE FACTORY DEFAULTS |
|
BACK |
|
|
|
|
<ALARM SETTINGS> |
|
|
|
DWELL TIME (SECS) |
|
|
EXIT |
|
|||||
<EDIT PRESET SCENE> |
EXIT |
|
EXIT |
|
|
|
<SET WASHER SEQUENCE> |
|
|
|
|
|
|
|
|
<EDIT CAMERA SETTINGS> |
|
|
|
|
BACK |
|
|
|
BACK |
|
BACK |
|
|
|
|
<MOTION DETECTION>* |
REFERENCE INFORMATION |
|
|
|
EXIT |
|
BACK |
|
EXIT |
|
EXIT |
|
|
|
|
<CLEAR PRESETS> |
PATTERN USAGE |
|
|
|
|
|
EXIT |
|
|
|
|
|
|
|
|
REMAINING |
|
|
|
|
|
|
|
|
|
|
|
|
|
||
<CLEAR CAMERA SETTINGS> |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BACK |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
EXIT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MOTION DETECTION* |
|
|
SET WINDOWS |
|
ALARM SETTINGS |
|
SET WASHER SEQUENCE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
EDIT THE PASSWORD |
||
MOTION DETECTION ENABLED |
|
|
|
WINDOW NUMBER |
|
ALARM NUMBER |
|
PRESET NOT DEFINED |
|
|
|
|
|
||
<EDIT DETECTION AREA> |
|
|
|
|
|
|
|
|
|
|
|
- - - - - - - - - - - - - - - - - |
|||
ACTIVATE AUX |
|
|
<EDIT WINDOW LOCATION> |
|
ALARM PRIORITY |
|
<EDIT PRESET LABEL> |
|
|
|
|
1234567890 |
OK |
||
|
|
<EDIT WINDOW ZOOM> |
|
ALARM ACTION |
|
<EDIT PRESET SCENE> |
|
|
|
|
|
ABCDEFGHIJ |
CANCEL |
||
AUX TIME |
|
|
ENABLE WINDOW |
|
ACTIVATE AUX |
|
<EDIT CAMERA SETTINGS> |
|
|
|
|
|
KLMNOPQRST |
|
|
BACK |
|
|
|
ALARM CONTACT |
|
|
|
|
|
|
|
UZWXYZ.,-/ |
SPACE |
||
|
|
REVERSE |
|
|
|
WASHER TIME (SECS) |
|
|
|
|
|
abcdefghij |
BACKSPACE |
||
EXIT |
|
|
CLEAR WINDOW |
|
BACK |
|
WIPER DELAY (SECS) |
|
|
|
|
|
klmnopqrst |
|
|
|
|
|
|
BACK |
|
EXIT |
|
AUTO RETURN |
|
|
|
|
|
uvwxyz*;: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
EXIT |
|
|
|
<CLEAR PRESET> |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
<CLEAR CAMERA SETTINGS> |
|
|
|
|
|
|
|
BACK
EXIT
EDIT DETECTION AREA*
DETECTION AREA 1
LOCATION
SENSITIVITY
DETECTION AREA 2
LOCATION
SENSITIVITY
DETECTION AREA 3
LOCATION
SENSITIVITY
DETECTION AREA 4
LOCATION
SENSITIVITY
BACK
EXIT
C1301M (6/05) |
9 |
10 |
C1301M (6/05) |
PELCO EXSITE EHXM
LANGUAGE |
ENGLISH |
<SYSTEM INFORMATION> <DISPLAY SETUP>
<UNIT SETTINGS>
RESET CAMERA
CYCLE CAMERA POWER
EXIT
The language for the on-screen menus is selectable. Available languages include English, Spanish, French, German, Italian, Portuguese, Polish, Russian, Turkish, and Czecholslovakian. The factory default language is English.
To change the display language:
1.Use the joystick to position the cursor beside LANGUAGE.
2.Press Iris Open. The cursor moves to the right, beside the current, selected language.
3.Move the joystick up or down to view selections. Press Iris Open to enter selection. All on-screen menus are changed to the selected language.
Quick Programming Guide
(See Page 9)
C1301M (6/05) |
11 |
PELCO EXSITE EHXM
LANGUAGE |
ENGLISH |
<SYSTEM INFORMATION> <DISPLAY SETUP>
<UNIT SETTINGS>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT
SYSTEM INFORMATION
UNIT MODEL |
EHXM30C22 |
POWER MODULE MEMORY |
AVAILABLE |
SOFTWARE VERSION |
0.90.9013 |
BIOS VERSION |
8.00.9000 |
FONT VERSION |
1.00 |
COMM |
2400,N,8,1 |
D ADDRESS |
1 |
P ADDRESS |
2 |
CM9500 MODE |
OFF |
32 PRESETS |
OFF |
PROTOCOL |
D |
<ADDITIONAL>
BACK
EXIT
|
ADDITIONAL |
FREE MEMORY |
30464 |
LAST RESET |
3 |
CAMERA ACTIVE |
YES |
FPGA VERSION |
2 |
VIDEO LEVEL |
HIGH |
CAMERA |
XXXX-XXXX |
<EAB>* |
|
<PMAB>** |
|
LANGUAGE 1 |
ENGLISH 1.00 |
LANGUAGE 2 |
ESPANOL 1.00 |
LANGUAGE 3 |
ITALIANO 1.00 |
LANGUAGE 4 |
DEUTSCH 1.00 |
LANGUAGE 5 |
PORTUGUES 1.00 |
LANGUAGE 6 |
FRANCAIS 1.00 |
LANGUAGE 7 |
CESKY 1.00 |
LANGUAGE 8 |
POLSKI 1.00 |
LANGUAGE 9 |
RUSSIAN 1.00 |
LANGUAGE 10 |
TURKISH 1.00 |
BACK |
|
EXIT |
|
The System Information screen displays ExSite model, software version, available memory, and other diagnostic information.
System settings cannot be changed using this screen. This screen is for reference only.
Use the following steps to display the System Information screen:
1.Use the joystick to position the cursor beside SYSTEM INFORMATION.
2.Press Iris Open. The SYSTEM INFORMATION window opens.
*EAB (Enclosure Accessory Board) – The EAB information screen displays availability, version, and part number of the enclosure accessory board
**PMAB (Power Module Accessory Board) – The EAB information screen displays availability, version, and part number of the power module accessory board.
12 |
C1301M (6/05) |