PRODUCT SPECIFICATION |
communication & power |
FT82011/FR82011 Ethernet Media Converter
ONE 10BASE-T/100BASE-TX PORT AND ONE 100BASE-FX FIBER PORT
Product Features
•Ethernet Media Converter:
–One 10BASE-T/100BASE-TX Port
–One 100BASE-FX Port
•Converts 10BASE-T/100BASE-TX Ethernet Data to 100BASE-FX Ethernet Data and Vice Versa
•Integrated Wavelength Division Multiplexing (WDM) in a Single Fiber
•Designed for Point-to-Point Applications
•User-Selectable 10BASE-T/100BASE-TX Port Functions:
–Autonegotiation Between 10 Mbps and 100 Mbps Data Rates and Between Full-Duplex and Half-Duplex Modes
–10 Mbps or 100 Mbps Selectable
–Full-Duplex or Half-Duplex Mode Selectable
–Enabling/Disabling of Flow Control
•Auto MDI/MDI-X (Medium Dependent Interface/Medium Dependent Interface Crossover) Operation
•Link-Down Detection
•Compliant with IEEE 802.3, 802.3u, and 802.3x Standards
•Multimode Fiber Support for Distances up to 2 km
•Single-Mode Fiber Support for Distances up to 46 km
•Laser Diode for Transmission of Optical Signals
•Environmentally Hardened
The FT82011/FR82011 media converter converts 10BASE-T/ 100BASE-TX Ethernet data to 100BASE-FX Ethernet data and vice versa.
Designed for point-to-point applications, the FT82011/FR82011 media converter provides one 10BASE-T/100BASE-TX port and one 100BASE-FX fiber port. The FT82011 and FR82011 media converters are used in combination with one another to provide wavelength compatibility. Using wavelength division multiplexing (WDM), bidirectional data is transported in a single fiber.
The 100BASE-FX fiber port is automatically forced to full-duplex 100 Mbps operation. Networking functions for the 10BASE-T/ 100BASE-TX port (RJ-45 twisted-pair copper port) are userselectable by means of a rotary switch. Autonegotiation allows the port to automatically negotiate between 10 Mbps and 100 Mbps data rates and between full-duplex and half-duplex modes. If autonegotiation is not desired, the port can be forced to specific modes of operation: 10 Mbps or 100 Mbps data rate, half-duplex or full-duplex mode, and the enabling/disabling of flow control.
•Designed to Meet NEMA TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
•No Performance Adjustments Required
•12 VDC or 24 VAC Power Supply
•Stand-Alone and Rack-Mountable Modular Design
•LED Indicators for Monitoring of Optic Signal/Laser Status, 100BASE-FX Port Status Including Far End Fault Indication (FEFI), 10BASE-T/100BASE-TX Port Status, and Operating Power
The auto MDI/MDI-X feature allows each RJ-45 port to connect to either a straight-through or crossover RJ-45 cable.
The link-down detection feature of the media converters propagates a link-down status among all 10BASE-T/100BASE-TX and 100BASE-FX ports connected in the network when a 10BASE-T/100BASE-TX link or 100BASE-FX link goes down. As a result, all ports are disabled and data transmission halts until the faulty link is restored.
Modular in design, the FT82011 and FR82011 units can be rack mounted or can be used as stand-alone modules. Rack mounting is accomplished using the RK5000 Series rack mount chassis. Standalone modules can be placed on a desktop or can be mounted to a wall.
ONE 10/100 Mbps |
|
ONE 10/100 Mbps |
||
CONNECTION |
|
|
|
CONNECTION |
|
FR82011 |
|||
|
FT82011 |
|
|
|
|
|
ONE |
|
|
|
|
FIBER |
|
|
|
|
|
|
International Standards |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Organization Registered Firm; |
|
|
|
|
|
C2653 / NEW 1-08 |
|
|
|
|
|||
|
ISO 9001 Quality System |
|
|
|
|
|||
|
|
|
|
|