Pelco DD53CBW-X User Manual

4.5 (4)
Spectra III
SE Series
C2445M-E (11/05)
OPERATION/PROGRAMMING
Models DD53CBW & DD53CBW-X
OPERATION/PROGRAMMING MANUAL
23X COLOR/BLACK AND WHITE
4 C2445M-E (11/05)
C2445M-E (11/05) 5
CONTENTS
WELCOME ................................................................................................................................................................................................ 7
GETTING STARTED .......................................................................................................................................................................... 7
HOW TO OPERATE YOUR DOME SYSTEM .............................................................................................................................................. 8
ACCESSING MAIN MENU (PRESET 95) .......................................................................................................................................... 9
CM6700/CM6800 ................................................................................................................................................................... 9
KBD200A/KBD300A (DIRECT MODE ONLY) ........................................................................................................................... 9
CM9500 .................................................................................................................................................................................. 9
CM9740/CM9760/CM9770/CM9780 .................................................................................................................................... 9
KBD4000/KBD4002 ............................................................................................................................................................... 10
MPT9500 ............................................................................................................................................................................... 10
NET300/NET350/NET4001A ................................................................................................................................................. 10
WS5050 ................................................................................................................................................................................. 10
VCD5000 ................................................................................................................................................................................ 10
QUICK START GUIDE - SYSTEM SETUP .................................................................................................................................................. 11
LANGUAGE .............................................................................................................................................................................................. 13
SYSTEM INFORMATION.......................................................................................................................................................................... 14
DISPLAY SETUP ....................................................................................................................................................................................... 15
LABEL POSITION ............................................................................................................................................................................. 16
DOME SETTINGS ..................................................................................................................................................................................... 17
CAMERA ......................................................................................................................................................................................... 17
TYPE OF LIGHTING ................................................................................................................................................................ 17
AUTO FOCUS ......................................................................................................................................................................... 17
ZOOM LIMIT .......................................................................................................................................................................... 18
ZOOM SPEED ......................................................................................................................................................................... 18
LOW LIGHT LIMIT .................................................................................................................................................................. 18
IR CUT FILTER ......................................................................................................................................................................... 19
ADVANCED CAMERA SETTINGS ................................................................................................................................................... 20
SHUTTER SPEED .................................................................................................................................................................... 20
AGC LIMIT ............................................................................................................................................................................. 20
AUTO IRIS .............................................................................................................................................................................. 21
AUTO SHARPNESS ................................................................................................................................................................ 22
AUTO WHITE BALANCE ........................................................................................................................................................ 22
BACKLIGHT COMPENSATION (BLC) ...................................................................................................................................... 23
VIDEO LEVEL .......................................................................................................................................................................... 24
WIDE DYNAMIC RANGE ....................................................................................................................................................... 24
MOTION SETTINGS ........................................................................................................................................................................ 25
AUTO FLIP .............................................................................................................................................................................. 25
PROPORTIONAL PAN ............................................................................................................................................................. 25
PARK TIME ............................................................................................................................................................................ 26
SCAN SPEED ......................................................................................................................................................................... 27
PRESET FREEZE FRAME ........................................................................................................................................................ 27
LIMIT STOPS .......................................................................................................................................................................... 28
AZIMUTH ZERO ..................................................................................................................................................................... 29
6 C2445M-E (11/05)
POWER UP ...................................................................................................................................................................................... 30
POWER UP ACTION ............................................................................................................................................................... 30
LINE SYNC ...................................................................................................................................................................................... 31
PRESETS ......................................................................................................................................................................................... 32
ENABLE MOTION DETECTION .............................................................................................................................................. 34
EDIT DETECTION AREAS ....................................................................................................................................................... 34
ACTIVATE AUX COMMAND .................................................................................................................................................. 35
AUX TIME .............................................................................................................................................................................. 35
PATTERNS....................................................................................................................................................................................... 36
ZONES ............................................................................................................................................................................................ 37
WINDOW BLANKING ..................................................................................................................................................................... 38
REVERSE ................................................................................................................................................................................ 40
CLEAR WINDOW ................................................................................................................................................................... 40
BLANK ALL ABOVE/BLANK ALL BELOW ............................................................................................................................... 40
ALARMS ......................................................................................................................................................................................... 41
AUX ................................................................................................................................................................................................. 44
TITLE TEXT ...................................................................................................................................................................................... 45
ALERT ............................................................................................................................................................................................. 46
REPEAT................................................................................................................................................................................... 46
ACK ACTION .......................................................................................................................................................................... 47
ACTIVATE AUX ....................................................................................................................................................................... 47
CURRENT READING .............................................................................................................................................................. 47
RESET ALERT ......................................................................................................................................................................... 47
CLEAR ............................................................................................................................................................................................. 48
PASSWORD .................................................................................................................................................................................... 49
RESET, CYCLE POWER, REBOOT ............................................................................................................................................................. 50
RESET CAMERA .................................................................................................................................................................... 50
CYCLE CAMERA POWER ....................................................................................................................................................... 50
REBOOT SYSTEM .................................................................................................................................................................. 50
SOFTWARE/LANGUAGE FILE UPLOAD ................................................................................................................................................... 51
UPLOAD ICON ................................................................................................................................................................................. 51
SPECIFICATIONS...................................................................................................................................................................................... 52
DD53CBW .............................................................................................................................................................................. 52
DD53CBW-X .......................................................................................................................................................................... 52
REGULATORY NOTICES ........................................................................................................................................................................... 53
C2445M-E (11/05) 7
WELCOME
Thank you for purchasing Pelco’s premier integrated dome system, Spectra III SE. Your new
system features a high resolution, color/black-white camera/optics package with IR filter and
programmable dome drive software.
This manual is designed to be a reference tool for the operation and programming of your
system. Inside you will find information about Spectra III SE’s features and commands, as well
as a detailed menu tree.
Getting Started
You will need to install your dome system before using this manual. Refer to the installation
packet supplied with the back box for installation instructions.
Once installed apply power to the Spectra III SE dome system. The system will start a
configuration sequence. When configuration is done, the following information is displayed:
Pelco Spectra III SE
*Version X.XX
D Address: 1
P Address: 2
Comm 2400, N, 8, 1
CONFIGURE DONE
This information will remain on the monitor until dome operation begins.
Refer to the following pages to learn how to operate and program your dome system.
*Pressurized Spectra III SE dome systems require software version 1.25 or higher to monitor
temperature, pressure, and dew point.
8 C2445M-E (11/05)
HOW TO OPERATE YOUR DOME SYSTEM
Operation How to Control
Pan and Tilt Move joystick or press the direction keys left/right and up/down.
Zoom Far To zoom far, do the following:
1. Press the Zoom Tele button or turn the joystick clockwise until zoom stops at the 32X zoom limit.
2. Release the button or joystick for one second.
3. To continue zooming (digitally), press the button or turn the joystick clockwise again until you have the
picture you want or reach the digital zoom
1
limit.
Zoom Wide Press the Zoom Wide button or turn the joystick counterclockwise.
Scanning
Stop Scan Preset 96
Random Scan Preset 97
Frame Scan Preset 98
Auto Scan Preset 99
Presets Refer to the documentation supplied with the control system.
Patterns
2
Refer to the documentation supplied with the control system.
Zones Refer to the
Zones
section and to the documentation supplied with the control system.
Alarms Refer to the
Alarms
section in this manual.
Auto Flip Turn on or off in the programming menu. Refer to the
Auto Flip
section in this manual.
1
Digital zoom magnifies the image electronically and the picture may appear pixilated. The larger the digital zoom limit the
greater the reduction in resolution.
2
The dome cannot do digital zoom in a pattern. Optical zoom will operate in a pattern.
C2445M-E (11/05) 9
Accessing Main Menu (Preset 95)
You can call up the main menu on your monitor by programming (setting or creating) preset 95
(preset 28 if in AD32-preset mode).
Programming preset 95 for Pelco’s controllers varies according to the type of controller you are
using. Instructions for programming preset 95 are given below for various Pelco controllers.
CM6700/CM6800
1. Enter the number of the Spectra dome system and press the CAM key.
2. Enter 95 and hold the PRESET key for two seconds.
3. In the Edit Preset menu, arrow to SET and press the ACK key. The main menu appears.
KBD200A/KBD300A (Direct Mode Only)
1. Enter 95.
2. Hold the PRESET key (approximately five seconds) until the main menu appears on the
screen.
CM9500
1. Enter the number of the Spectra dome system and press the CAM key. The Main menu
appears.
2. Highlight SETUP in the Main menu and press the SELECT key.
3. Highlight CAM in the Setup menu and press the SELECT key.
4. Highlight PRESET in the Camera menu and press the SELECT key.
5. Enter 95 and press the F1 key. The main menu appears.
CM9740/CM9760/CM9770/CM9780
1. Press the ESCAPE key to open the Main menu. Select DEF. The Define Submenu
appears.
2. Enter your four-digit PIN
if this is your first time entering this mode.
3. Enter 95 and select PRST. The main menu appears on the monitor.
4. Select the Quit icon to return to the default menu.
(Continued on next page)
10 C2445M-E (11/05)
KBD4000/KBD4002
1. Press the SPOT MONITOR key.
2. Enter 95, then hold the PRESET key (approximately five seconds) until the main menu
appears on the screen.
MPT9500
Standard Coaxitron Mode
1. Enter 95 and press the PRESET SET key.
2. Position the asterisk in the YES row and press the F1 key. The main menu appears.
Extended Coaxitron or RS-485 Mode
1. Enter 95 and press the PRESET SET key.
2. Press the F2 key. The main menu appears.
NET300/NET350/NET4001A
1. Check the Set box.
2. Click the preset 95 button. The main menu appears.
WS5050
1. Right-click in the video pane of the Spectra dome system.
2. Click Preset and then click Select Preset.
3. Enter 95 and then click OK.
VCD5000
1. Enter 95 for the preset action. The shortcuts menu appears.
2. Press the Preset button on the KBD5000.
C2445M-E (11/05) 11
QUICK START GUIDE – SYSTEM SETUP
Quick Programming Guide
Access main menu (preset 95). See the
Accessing Main Menu
(Preset 95)
section.
Use the joystick* to position the cursor beside menu selection.
Press Iris Open, the submenu/cursor moves to the right.
Move the joystick up or down to view selections.
Press Iris Open to make selection.
Press Iris Close to cancel selection.
* If your controller does not have a joystick, use the up or down key.
** This setting only applies to Pressurized Spectra III SE dome systems
with software version 1.25 or higher. Spectra III systems that are
not pressurized or pressurized systems that do not have dome drive
software version 1.25 or higher will not display this menu item.
Software version 1.25 or higher includes the software to monitor
temperature, pressure, and dew point for Pressurized Spectra III SE
systems.
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT**
EXIT
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
DOME SETTINGS
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>**
<CLEAR>
<PASSWORD>
BACK
EXIT
PRESET NUMBER 1
* * * PRESET NOT DEFINED * * *
POWER UP ACTION
BACK
EXIT
AUTO FLIP
PROPORTIONAL PAN
PARK TIME (MINUTES)
PARK ACTION
SCAN SPEED DEG/S
PRESET FREEZE FRAME
CAMERA
TYPE OF LIGHTING
AUTO FOCUS
ZOOM LIMIT
BACK
EXIT
DISPLAY SETUP
PRESET LABEL 2 (SECS)
ZONE LABEL 2 (SECS)
ZOOM 2 (SECS)
AZIMUTH/ELEVATION 2 (SECS)
DIRECTION OFF
ALARM MESSAGE 2 (SECS)
<LABEL POSTIONS>
RESTORE FACTORY DEFAULTS
BACK
EXIT
FREE MEMORY
LAST RESET
AZIMUTH ZERO OFFSET
MOTOR ACTIVE
CAMERA ACTIVE
FPGA VERSION X
VIDEO LEVEL NORMAL
CAMERA XXXX-XXXX
BACK
EXIT
18304
POWER ON
0°
YES
YES
DOME DRIVE MODEL
BACK BOX MEMORY
SOFTWARE VERSION
BIOS VERSION
FONT VERSION
COMM
D ADDRESS
P ADDRESS
CM9500 MODE
32 PRESETS
PROTOCOL
DD53CBW
AVAILABLE
XX.X
XX.X
XX.X
2400, N, 8, 1
1
2
OFF
OFF
C
SYSTEM INFORMATION
<ADDITIONAL>
BACK
EXIT
<SET AZIMUTH ZERO>
<CLEAR AZIMUTH ZERO>
LIMIT STOPS
<SET MANUAL STOPS>
<CLEAR MANUAL STOPS>
<SET SCAN STOPS>
<CLEAR SCAN STOPS>
LINE SYNC ON
LINE SYNC PHASE 0
BACK
EXIT
ZONE NUMBER 1
* * * ZONE NOT DEFINED * * *
<EDIT ZONE LABEL>
<EDIT ZONE>
ZONE ENABLED
ZONE BLANKING
<CLEAR ZONE>
BACK
EXIT
PATTERN NUMBER 1
<PROGRAM PATTERN>
<CLEAR PATTERN>
BACK
EXIT
REFERENCE INFORMATION
PATTERN USAGE
REMAINING
<SET WINDOWS>
STYLE GRAY
BLANK ALL ABOVE OFF
BLANK ALL BELOW OFF
BACK
EXIT
RESUME OFF
SEQUENCE (SECS) 5
RESET DELAY (SECS) 0
<ALARM SETTINGS>
BACK
EXIT
AUX 1 MODE
DWELL TIME (SECS)
AUX 2 MODE
DWELL TIME (SECS)
BACK
EXIT
BACK
EXIT
CLEAR ALL ZONES
CLEAR ALL PRESETS
CLEAR ALL PATTERNS
CLEAR ALL WINDOW BLANKING
RESTORE FACTORY DEFAULTS
BACK
EXIT
ENABLE PASSWORD OFF
<EDIT PASSWORD>
BACK
EXIT
ADVANCED SETTINGS
WINDOW NUMBER 1
<EDIT WINDOW LOCATION>
<EDIT WINDOW ZOOM>
ENABLE WINDOW NO
REVERSE
CLEAR WINDOW
BACK
EXIT
ALARM NUMBER
ALARM PRIORITY
ALARM ACTION
ACTIVATE AUX
ALARM CONTACT
BACK
EXIT
ADDITIONAL
LANGUAGE 1
LANGUAGE 6
OUTDOOR
ON
X184
MEDIUM
ZOOM SPEED
IR CUT FILTER
AUTO IR LEVEL
<ADVANCED SETTINGS>
AUTO
DUSK
SHUTTER SPEED
AGC LIMIT
AUTO IRIS
AUTO IRIS LEVEL
AUTO IRIS PEAK
AUTO SHARPNESS
SHARPNESS LEVEL
AUTO WHITE BALANCE
R GAIN
B GAIN
BACKLIGHT COMP
VIDEO LEVEL
WIDE DYNAMIC RANGE
BACK
EXIT
AUTO
28
AUTO
66
8
ON
26
ON
482
678
OFF
HIGH
OFF
ON
ON
0
NONE
25
AUTO
ON
MOTION
BACK
EXIT
POWER UP LINE SYNC
PRESETS
<EDIT PRESET LABEL>
<EDIT PRESET SCENE>
<EDIT CAMERA SETTINGS>
REFERENCE INFORMATION
AZIMUTH
ELEVATION
ZOOM
CUSTOM CAMERA SETTINGS
<CLEAR PRESET>
<CLEAR CAMERA SETTINGS>
BACK
EXIT
PATTERNS ZONES
ENABLE TITLE TEXT
<EDIT TITLE TEXT>
TITLE TEXT
1
LOW
NONE
NO
N/O
WINDOW BLANKING
SET WINDOWS
TOGGLE
1
TOGGLE
1
ALARMS
ALARM SETTINGS
ALERT**
TEMPERATURE
DEWPOINT
PRESSURE
REFRESH
BACK
EXIT
0°C
0°F
0°C
0°F
0.0 PSIG
0.0 BAR
CURRENT READING**
REPEAT
ACK ACTION
RESET ALERT
BACK
EXIT
CONSTANT
ALWAYS ON
ACTIVATE AUX
<CURRENT READING>
NO
AUX CLEAR PASSWORD
1234567890
ABCDEFGHIJ
KLMNOPQRST
UVWXYZ.,-/
abcdefghij
klmnopqrst
uvwxyz#&:*
OK
CANCEL
SPACE
BACKSPACE
EDIT THE PASSWORD
----------
NO
OFF
ENGLISH X.XX
ITALIANO X.XX
<MOTION DETECTION>
LABEL POSITION
[ZONE LABEL-------]
[PRESET LABEL-------]
[ALARM 1-------]
[ALERT MESSAGE-------]**
[TITLE TEXT]
SAVE AND EXIT
CANCEL AND EXIT
HELP
XXX°/-XX°
NE
XXX.XX
PRESSURIZED**
X.XX
AUTO
100%
0%
EDIT DETECTION AREAS
DETECTION AREA 1
LOCATION 0
SENSITIVITY MEDIUM
DETECTION AREA 2
LOCATION 0
SENSITIVITY MEDIUM
DETECTION AREA 3
LOCATION 0
SENSITIVITY MEDIUM
DETECTION AREA 4
LOCATION 0
SENSITIVITY MEDIUM
BACK
EXIT
-
-
-
-
LOW LIGHT LIMIT 2
Presets
The following presets are reserved for special functions.
Preset Function
33 Flip command
34 Pan zero command
83-87 Reserved
88 IR filter IN (color)
89 IR filter OUT (black-white)
90-91 Manual limit stops
92-93 Scan limit stops
94 Reserved
95 Select main programming menu
96 Stop a scan
97 Random scanning
98 Frame scanning
99 Start auto scanning
NOTE: For American Dynamics controllers with only 32 presets, switch
SW3-1 on the dome drive to the ON position. When SW3-1 is ON, preset
99 becomes 32 92 becomes 25
98 becomes 31 91 becomes 24
97 becomes 30 90 becomes 23
96 becomes 29 89 becomes 22
95 becomes 28 88 becomes 21
93 becomes 26
If the limit stops are turned off, presets 23-26 can be used as regular
presets.
12 C2445M-E (11/05)
C2445M-E (11/05) 13
LANGUAGE
The language for the on-screen menus is selectable. Available languages include English,
Spanish, French, German, Italian, Portuguese, Russian, Polish, Turkish, and Czechoslovakian.
The factory default language is English.
NOTE: The dome system cannot store all 10 languages in its memory. There are two language
packages available. The standard language package includes English, Spanish, Portuguese,
Italian, French, and German. The alternate package includes English, Russian, Polish, Turkish,
and Czechoslovakian. If your dome system does not have the language package that you require,
you must upload the other language package. Refer to the
Software/Language File Upload
section.
To change the display language:
1. Use the joystick to position the cursor beside LANGUAGE.
2. Press Iris Open. The cursor moves to the right, beside the current, selected language.
3. Move the joystick up or down to view selections. Press Iris Open to enter selection.
All on-screen menus are changed to the selected language.
EXIT
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
*This setting only applies to
Pressurized Spectra III SE dome
systems with software version
1.25 or higher.
(See page 11)
Quick Programming Guide
14 C2445M-E (11/05)
SYSTEM INFORMATION
The system Information screen displays dome drive model, software version, available memory,
and other diagnostic information.
System settings cannot be changed using this screen. This screen is for reference only.
Use the following steps to display the System Information screen:
1. Use the joystick to position the cursor beside SYSTEM INFORMATION.
2. Press Iris Open. The SYSTEM INFORMATION window opens.
EXIT
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
BACK
EXIT
DOME DRIVE MODEL DD53CBW
BACK BOX MEMORY AVAILABLE
SOFTWARE VERSION XX.X
BIOS VERSION XX.X
FONT VERSION XX.X
COMM 2400, N, 8, 1
D ADDRESS 1
P ADDRESS 2
CM9500 MODE OFF
32 PRESETS OFF
PROTOCOL C
PRESSURIZED* X.XX
<ADDITIONAL>
SYSTEM INFORMATION
BACK
EXIT
FREE MEMORY 18304
LAST RESET POWER ON
AZIMUTH ZERO OFFSET 0
o
MOTOR ACTIVE YES
CAMERA ACTIVE YES
FPGA VERSION X
VIDEO LEVEL NORMAL
CAMERA XXXX-XXXX
LANGUAGE 1 ENGLISH X.XX
LANGUAGE 2 ESPANOL X.XX
LANGUAGE 3 PORTUGUES X.XX
LANGUAGE 4 DEUTSCH X.XX
LANGUAGE 5 FRANCAIS X.XX
LANGUAGE 6 ITALIANO X.XX
ADDITIONAL
*This setting only applies to
Pressurized Spectra III SE dome
systems with software version
1.25 or higher.
C2445M-E (11/05) 15
DISPLAY SETUP
Display setup allows you to program how labels are displayed on the monitor. The following
labels are available:
PRESET LABEL Identifies preset.
ZONE LABEL Identifies zone.
ZOOM RATIO Identifies the amount of magnification.
AZIMUTH
1
/ELEVATION
2
Amount of pan from 0° and the amount of tilt from 0° horizontal.
DIRECTION Displays compass direction.
ALARM MESSAGE Displays activated alarm.
A preset label is displayed when a preset is called. A zone label is displayed when the system
moves into a zone. The zoom ratio label is displayed when zoom is activated. Azimuth/elevation
and direction labels are displayed when pan/tilt is activated. An alarm message appears on the
monitor when an alarm occurs.
The following settings are available for each label:
OFF Label is not displayed when activated.
CONSTANT The label is continually displayed when activated.
2 SECONDS The label is displayed for 2 seconds after activation.
5 SECONDS The label is displayed for 5 seconds after activation.
10 SECONDS The label is displayed for 10 seconds after activation.
1
Azimuth is the pan angle from 0° to 359°.
2
Elevation is the tilt position from 0° (horizon) to -90°.
BACK
EXIT
PRESET LABEL 2 (SECS)
ZONE LABEL 2 (SECS)
ZOOM 2 (SECS)
AZIMUTH/ELEVATION 2 (SECS)
DIRECTION OFF
ALARM MESSAGE 2 (SECS)
<LABEL POSITIONS>
RESTORE FACTORY DEFAULTS
DISPLAY SETUP
EXIT
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
*This setting only applies to
Pressurized Spectra III SE dome
systems with software version
1.25 or higher.
(See page 11)
Quick Programming Guide
16 C2445M-E (11/05)
Label Position
Labels can be placed anywhere on the monitor. This feature allows you to customize the
appearance of your monitor screen.
The following labels are not set at fixed positions:
PRESET LABEL
ZONE LABEL
ALARM 1
ZOOM RATIO - XXX.XX
AZIMUTH
1
/ELEVATION
2
- XXX°/-XX°
DIRECTION - NE
ALERT MESSAGE
3
*
TITLE TEXT
To set a label position:
1. Use the joystick to position the cursor beside a label.
2. Press Iris Open.
3. Use the joystick to move the label up, down, left, and/or right.
4. Press Iris Open.
5. Repeat steps 1 through 4 to position other labels.
6. Position the cursor next to Save and Exit. Press Iris Open to save settings and exit menu.
1
Azimuth is the pan angle from 0° to 359°.
2
Elevation is the tilt position from 0° (horizon) to -90°.
3
The alert message is the warning displayed on the monitor if pressure, temperature, or dew
point inside the dome reach unacceptable levels.
BACK
EXIT
PRESET LABEL 2 (SECS)
ZONE LABEL 2 (SECS)
ZOOM 2 (SECS)
AZIMUTH/ELEVATION 2 (SECS)
DIRECTION OFF
ALARM MESSAGE 2 (SECS)
<LABEL POSITIONS>
RESTORE FACTORY DEFAULTS
DISPLAY SETUP
EXIT
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
[ZONE LABEL-------]
[PRESET LABEL-------]
[ALARM 1-------]
[ALERT MESSAGE-------]*
[TITLE TEXT]
SAVE AND EXIT
CANCEL AND EXIT
HELP
XXX
0
/-XX
0
NE
XXX.XX
LABEL POSITION
*This setting only applies to
Pressurized Spectra III SE dome
systems with software version
1.25 or higher.
C2445M-E (11/05) 17
BACK
EXIT
TYPE OF LIGHTING OUTDOOR
AUTO FOCUS ON
ZOOM LIMIT X184
ZOOM SPEED MEDIUM
LOW LIGHT LIMIT 2
IR CUT FILTER AUTO
AUTO IR LEVEL DUSK
<ADVANCED SETTINGS>
CAMERA
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
BACK
EXIT
DOME SETTINGS
EXIT
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
DOME SETTINGS
Camera
TYPE OF LIGHTING
Pelco has calibrated settings that optimize the white balance, and the picture, for indoor and
outdoor lighting conditions. There are two settings:
OUTDOOR (default)
INDOOR
AUTO FOCUS
Auto focus allows the lens to remain in focus during zoom-in, zoom-out, and motion functions.
There are two auto focus settings:
ON (default) If auto focus mode is set to ON, the camera will focus
automatically when using pan, tilt, and zoom functions.
OFF Focus is operated manually. To focus, press the Focus Far or Focus
Near button on the controller.
*This setting only applies to
Pressurized Spectra III SE dome
systems with software version
1.25 or higher.
(See page 11)
Quick Programming Guide
Loading...
+ 39 hidden pages