LIMITED TWO MONTH CONSUMER WARRANTY AND ONE YEAR CONSUMER WARRANTY WHEN PURCHASED AND INSTALLED FROM AUTHORIZED ORION DEALER
Electronics Limited Warranty
Please keep your original box. Orion warrants this product to be free from defects in materials and workmanship under normal use for a period of TWO (2) months from the date of original purchase receipt. When purchased and installed from anAUTHORIZED ORION dealerit is warranted for a period of ONE (1) Yearfrom the date of the original purchase receipt.
The ORIGINAL Receipt must be provided for all claims. Should service be necessary under this warranty for any reason due to manufacturing defect or malfunction during the warranty period.
ORION will repair or replace(at its discretion) the defective merchandise with equivalent merchandise with equivalent merchandise at no charge. Warranty replacements may have cosmetic scratches or blemishes. Discontinued products may be replaced with more current equivalent products.
This warranty is valid only to the original purchaser and is non-transferable toany other person or party. Any
applicable |
implied |
warranties are |
limited in duration to a |
period of the express warranty provided herein |
||
beginning |
with |
the date of the originalpurchase at retail, and no warranties, whether express or implied, |
||||
shall apply to this product thereafter. |
Some states do not allow limitations on implied warranties; therefore |
|||||
these exclusions may not apply to you. This warranty gives |
you specific legal rights; however you may have |
|||||
other rights that vary from state to state. |
|
|
|
|||
What to Do if you need Warranty or Service |
|
ORION dealer for warranty service. |
||||
Defective |
merchandise should be returned to your local authorized |
|||||
Assistance locating anauthorized |
dealer can be found at the products main website www.orioncaraudio.com |
|||||
or by contacting ORION directly |
at |
1-855-475-6048.If it becomes necessary foryou to return DEFECTIVE |
||||
merchandise directly to ORION, |
call the ORION Customer Care |
number at 1-855-475-6048for a Return |
Merchandise Authorization (RMA) number. Package all defective items in the original container or in a package that will prevent shipping damage. The shipping address and instructions will be given to you by our customer care representative upon their issuing the RMA number.
The RMA number must be clearly marked on the outside of the package. Please return only defective components. The return of functioning items increases your return freight charges. NONDEFECTIVE items will not be exchanged.You will be contacted by customer care advising you of such situations, and product will be returned to you upon your payment of freight charges for the return of such product back to you.
Include a copy of the original receipt with the PURCHASE DATE clearly visible, and a ROOF of PURCHASE
statement listing the CUSTOMERSNAME, DEALER's NAME and INVOICE number, andproduct |
purchased. |
|
Warranty expiration on items without ROOF of PURCHASE |
will be determined from the |
type of sale |
and manufacturing date code. FREIGHT on defectives products returned must be PREPAID by you or your authorized dealer; items sent freight collect, or COD will be REFUSED.
What is not covered?
The warranty is valid only if the product is used for the purpose for which it was designed and does NOT COVER the following;
Damage due to improper installation and sound settings, excessive or insufficient voltage spikes, and use of inferior low grade wiring.
Subsequent Damage to other components
Damage caused by exposure to moisture, excessive heat, chemical cleaners, and/or UV Radiation.
Damage through negligence, misuse, accident or abuse. Repeated returns for the same damagemay be considered abuse.
Any cost or expense related to the removal or installation of product. No Installation Fee reimbursements.
Items previously repaired or modified by any unauthorized repair facility
Return shipping costs from ORION to you on non-defective items
Products with tampered or missing barcode labels
Products returned without a Return Merchandise Authorization(RMA) number
Freight Damage
The cost of shipping product to ORION, from you to Orion
Service performed by anyone other than Orion
Damage related to Acts of Nature, lightning, hurricanes, flood, tornadoes, and wildfires.
Products Sold outside of United States have NO WARRANTY expressed or implied
How long will it take?
ORION strives to maintain a goal of 7 day service for all electronics products (amplifiers, equalizers , electronic crossovers, etc.) returns. Delays may be incurred iflack of replacement inventory or parts is encountered. Failure to follow these Stepsmay void your warranty. Any questions can be directed to the ORION Customer Care Department at 1-855-475-6048.
4 CHANNEL AMPLIFIERS
CB600.4
CB1000.4
CB1500.4
CB2000.4
CB3000.4
2 CHANNEL AMPLIFIERS
CB300.2
CB600.2
CB1200.2
CB2700.2
5 CHANNEL AMPLIFIERS
CB1500.5
CB2700.5
MONOBLOCK CLASS AB 2 OHM AMPLIFIERS
CB1000.1M2
MONOBLOCK CLASS D 1 OHM AMPLIFIERS CB1000.1D CB1500.1D CB2500.1D CB3500.1D CB5000.1D
MONOBLOCK CLASS D 2 OHM AMPLIFIERS CB1500.1D2 CB2500.1D2
2016
TABLE OF CONTENTS |
|
Introduction................................................................................. |
.......2 |
Installation Instructions...................................................................... |
.2 |
Record Your Serial Number and Date.................................................... |
2 |
Functions....................................................................................... |
3~4 |
Operation ........................................................................................... |
5 |
Trouble Shooting.......................................................................... |
...... 5 |
Precautions ........................................................................................ |
6 |
Fuse Replacement.............................................................................. |
6 |
Stereo Mode ................................................................................. |
7~9 |
Speakers Connections.................................................................. |
10~17 |
Bridged Mode.............................................................................. |
18~20 |
Speaker Connections At Bridged................................................... |
21~26 |
Power Connection Leads................................................................... |
27 |
Wiring Instructions............................................................................ |
28 |
Operation ......................................................................................... |
29 |
Interference ...................................................................................... |
30 |
Specification ............................................................................... |
31~35 |
INTRODUCTION
Thank you for purchasing our car audio amplifier. These power amplifier has been
designed to provide high quality performance with minimum |
and |
|
maintenance. However, it's performance will only be as good as the care |
||
quality of components with which is installed. We therefore |
advise that you read |
|
these instructions very carefully to familiarize yourself with |
the product and |
it's |
features. |
|
|
Before installing the power amplifier please read this instruction manual carefully. The instructions for mounting and connecting the set have to be followed precisely. If necessary, a service center should be consulted.
All connection for DC power, signal input and speaker outputs can be carried out easily and safely by way of RCA and screwed terminals.
INSTALLATION INSTRUCTIONS
Please choose a mounting place without any direct weather influences. Note that the amplifier generates heat so that a well ventilated place is necessary. According to your car's construction the set can be made very carefully in order to ensure the amplifier's full performance and reliability.
Keep |
the |
wire connections as |
short as possible with sufficient length in |
|
order to minimize power losses |
and provide a higher audio output of the system. |
|||
For safety |
reasons route all power and speaker wiring by using the exiting wire |
|||
channels. |
|
|
|
|
To minimize damage to the cables, take care that they do not pass sharp edged |
||||
metal. |
|
far away as |
possible from the ignition cables, modules in the |
|
Lay |
all cables as |
|||
boot |
and under the key dashboard, as these create interference. |
|||
Add |
a fuse into the |
(+) power cable in a distance of not more than30cm from the |
||
positive battery pole. |
|
|||
Keep |
the |
length of |
the power wires as short as possible . It is better to use power |
cables which are short and then longer speaker cables.
In order to reduce interference , please pay attention to the wiring instructions.
RECORD YOUR SERIAL NUMBER AND DATE
To ensure your warranty, please record the following information regarding your new amplifier.
Model:
Serial Number:
Date of Purchase: Purchased from:
1 |
2 |
FUNCTIONS
CB600.4/CB1000.4/CB1500.4/CB2000.4/CB3000.4
PWR BASS BOOST |
GAIN INPUT MODE |
OUTPUT |
CH4 |
INPUT |
CH2 INPUT MODE |
GAIN |
BASS BOOST |
|||||||
PRO |
0dB |
+10dB |
Min Max |
LO |
HI |
CH4 |
CH3 |
|
CH1 |
LO |
HI |
Min Max |
0dB |
+10dB |
|
40Hz |
LPF FULL HPF |
50Hz |
4KHz |
|
50Hz |
4KHz |
HPFFULL LPF |
500Hz |
|||||
REMOTE |
500Hz |
MODE |
CH3 |
|
|
|
MODE |
40Hz |
||||||
LPF |
HPF |
|
|
|
HPF |
LPF |
CB300.2/CB600.2/CB1200.2
PWR |
LINE OUT LINE INPUT |
|
|
|
|
|
|
PRO |
R |
Min Max |
0dB +10dB |
50Hz 4KHz |
HPF LPF |
40Hz 500Hz |
|
LO HI |
FULL |
REMOTE |
|||||
|
INPUT MODE |
GAIN |
BASS BOOST |
HPF |
MODE |
LPF |
|
|
L |
|
|
|
|
|
|
CB1500.5 / CB2700.5
|
|
CH3/CH4 |
|
|
|
|
INPUT |
|
INPUT MODE |
GAIN |
PWR |
|||
50Hz |
4KHz |
HPF FULL |
Min |
Max |
LO |
HI |
CH2 |
CH4 |
CH5 |
R |
HI |
Min |
Max |
PRO |
MODE |
LO |
|||||||||||||
50Hz |
4KHz |
HPF FULL |
Min |
Max |
LO |
HI |
|
|
|
L |
400Hz |
0dB |
+18dB |
|
MODE |
CH1 |
CH3 |
|
15Hz |
|
|||||||||
HPF |
GAIN |
INPUT MODE |
|
LPF BASS BOOST REMOTE |
||||||||||
|
|
CH1/CH2 |
|
|
|
|
|
|
|
|
CH5 |
|
FUNCTIONS
CB2700.2
PWR |
LINE OUT LINE INPUT |
|
|
|
|
|
|
|
|
|
PRO |
R |
Min Max |
0dB +18dB |
50Hz 4KHz |
HPF LPF |
40Hz 500Hz |
0 |
0 |
180 |
0 |
LO HI |
FULL |
|
REMOTE |
|||||||
|
INPUT MODE |
GAIN |
BASS BOOST |
HPF |
MODE |
LPF |
PHASE |
L
CB1000.1M2
PWR |
LINE OUT LINE INPUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
PRO |
|
|
R |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
15Hz |
|
400Hz 0dB |
|
+18dB |
|
|
MIN |
MAX |
|
|
|
|
|
|
|
|
|
||||||||||
|
|
OFF 25Hz |
|
0O 180O |
|
|
||||||||||||||||
|
|
|
GAIN |
SUB SONIC |
|
PHASE |
LPF BASS BOOST REMOTE |
L
CB1000.1D/CB1500.1D/CB1500.1D2/CB2500.1D/
CB2500.1D2/CB3500.1D/CB5000.1D
PWR |
LINE OUT LINE INPUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IN |
||
PRO |
|
|
R |
Min |
|
Max |
|
|
|
|
|
|
|
|
|
|
|
|
|
15Hz |
|
400Hz 0dB |
|
+18dB |
BRIDGED |
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||
|
|
|
OFF 25Hz |
|
0O 180O |
|
|
||||||||||||||||||
PRO |
|
|
|
GAIN |
SUB SONIC |
|
PHASE |
LPF BASS BOOST REMOTE |
|
||||||||||||||||
|
|
|
|
|
|
L
OUT
Input Mode |
Sub Sonic control |
Gain control |
Bass Boost control |
LPF / HPF control |
Thermal protection |
Mosfet power supply |
LED Power and Protection Indicator |
1~5 Channel Power Amplifier |
Low Input and High Input Selected |
3 |
4 |
OPERATION
GND(-)=GROUND CONNECTION
Connect the GND terminal to the chassis ground of your car and take care of best electric and mechanic contact. In doing so, drill a hole in to the car chassis near the amplifier then remove color, dirt or any other substance from the ground point. After that fasten the cable end with added ring terminal by using a screw. Ensure
that the ground connection is as short as possible and that the cable |
diameter is |
sufficient ( min 4 mm" ). Route the ground cables from the radio |
and all other |
equipment parts. like equalizer. active crossover network or other amplifiers, to |
|
the same ground point. |
|
+12V=POWER SUPPLY |
a lead cable |
Connect the +12V terminal to the positive pole of the battery with |
and add a fuse in to the power cable in a distance of not more then 30 cm from the battery. The lead cables's diameter should be at least 4 mm' for a length of 3m
and 6 mm" for a length of 6m. |
|
REM(ON/OFF)REMOTE CONTROL |
car radio. |
Connect the REM terminal to the automatic antenna connector of your |
|
Now when turning on and off your car radio. the amplifier automatically |
switches |
ON and OFF. Acable diameter of 0.5mm is sufficient. |
|
FUSE
The amplifier is equipped with a plug-in auto fuse protecting the set against fault
conditions. Do not use a fuse with a higher value and never bridge the |
fuse over, |
as this may lead to irreparability damage so that ant any claim for |
warranty is |
denied. |
|
TROUBLE SHOOTING |
|
No Function:
The connection cable is not connected correctly ( = terminal BATT/GND /REM). Ensure that all connections and mechanic contact and that the jacket has been removed. The fuse is defective-pay attention to the correct value of a new fuse!
No Sound: |
|
Speaker cable or speaker plug are not connected correctly. |
|
No Sound /Red LED Protection Shines: |
thus eliminate the |
The plus and minus wires of the speaker cable have contact, |
|
short circuit. If you use a 2 Ohm speaker in stereo mode, a |
4 Ohm speaker in |
bridge mode or tri-mode and the set is overloaded, then turn the gain control to "min " until the operation is free of trouble.
Poor Sound Quality ( Distortions ):
The speakers are overloaded, therefore turn down the volume level and check the volume control positions.
No Stereo Sound And A Weak Bass:
Speaker cables (+) and (-) are mixed up, unit wired out of phase.
PRECAUTIONS
This unit is designed for negative ground 12V DC operation only.
Use speakers with an impedance of 2 or 4 Ohms ( 2 to 4 Ohm when used as bridging amplifier )
Avoid installing the unit where:
-It would be subject to high temperatures, such as from direct sunlight or hot air from the heater.
-It would be exposed to rain or moisture. -It would be subject to dust or dirt.
If your car is parked in direct sunlight and there is a considerable rise in temperature inside the car, allow the unit to cool off before operation.
When installing the unit horizontally, be sure not to cover the heatsink fins with the floor carpet.
If this unit is placed too close to the car radio, an interference may occur. In this case, separate the amplifier from the car radio.
This power amplifier employs a protection circuit to protect the transistors and
speakers if the amplifier malfunctions. |
Do not attempt to test the protection |
||
circuits by covering the heatsink or connecting improper loads. |
|||
Do not use the unit with |
a |
weak auto battery as its optimum performance |
depends on a normal battery supply voltage.
For safety reasons, keep the volume of your car audio system moderate so that you can still hear normal traffic sounds outside your car.
FUSE REPLACEMENT
If the fuse blows, check the power connection and replace the f use. If the fuse blows again after replacement, there may be an internal malfunction. In this case, consult your dealer.
WARNING:
fuse. Use of a higher amperage fuse may cause
This amplifier is provided with a protection circuit which operates in the following cases when:
the unit is overheated.
the speaker terminals are short circuited.
5 |
6 |
STEREO MODE
CB600.4/CB1000.4/CB1500.4/CB2000.4/CB3000.4
PWR BASS BOOST GAIN INPUT MODE |
OUTPUT |
CH4 |
PRO |
0dB |
+10dB |
Min |
Max |
LO |
|
HI |
CH4 |
CH3 |
|
40Hz |
500Hz |
LPF FULL HPF |
50Hz |
4KHz |
||||
REMOTE |
MODE |
CH3 |
|
||||||
LPF |
HPF |
|
|
||||||
|
|
|
|
|
|
|
|
CH4 |
CH3 |
INPUT |
CH2 |
INPUT MODE |
GAIN |
BASS BOOST |
|||
|
CH1 |
LO |
HI |
Min |
Max |
0dB |
+10dB |
|
50Hz |
4KHz |
HPFFULL LPF |
500Hz |
|||
|
|
MODE |
40Hz |
||||
|
|
HPF |
LPF |
||||
|
CH1 CH2 |
|
|
|
|
|
CAR STEREO
CB300.2/CB600.2/CB1200.2
PWR |
LINE OUT LINE INPUT |
|
|
|
|
|
|
PRO |
R |
Min Max |
0dB +10dB |
50Hz 4KHz |
HPF LPF |
40Hz 500Hz |
|
LO HI |
FULL |
REMOTE |
|||||
|
INPUT MODE |
GAIN |
BASS BOOST |
HPF |
MODE |
LPF |
|
|
L |
|
|
|
|
|
|
R |
L |
CAR STEREO |
STEREO MODE
CB2700.2
PWR |
LINE OUT LINE INPUT |
|
|
|
|
|
|
|
|
|
PRO |
R |
Min Max |
0dB +18dB |
50Hz 4KHz |
HPF LPF |
40Hz 500Hz |
0 |
0 |
180 |
0 |
LO HI |
FULL |
|
REMOTE |
|||||||
|
INPUT MODE |
GAIN |
BASS BOOST |
HPF |
MODE |
LPF |
PHASE |
L
R |
L |
CAR STEREO |
CB1500.5/2700.5
CH3/CH4 |
INPUT |
INPUT MODE GAIN |
PWR |
50Hz |
4KHz |
HPF FULL |
Min |
Max |
LO |
HI |
CH2 |
CH4 |
CH5 |
R |
|
HI |
Min |
Max |
PRO |
|
MODE |
LO |
|
||||||||||||||
50Hz |
4KHz |
HPF FULL |
Min |
Max |
LO |
HI |
|
|
|
|
L |
400Hz |
0dB |
+18dB |
|
|
MODE |
CH1 |
CH3 |
|
|
15Hz |
|
||||||||||
HPF |
GAIN |
INPUT MODE |
|
|
LPF |
BASS BOOST REMOTE |
||||||||||
|
|
CH1/CH2 |
|
|
|
|
|
L |
|
R |
|
|
CH5 |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
CH2 |
CH1 |
CH3 CH4 |
CH5 |
|
|
|
|
|
|
CAR STEREO
Input Mode
Gain control
LPF / HPF control
Mosfet power supply
1~5 Channel Power Amplifier
Remote control
Bass Boost control
Thermal protection
LED Power and Protection Indicator
Low Input
7 |
8 |
STEREO MODE |
SPEAKERS CONNECTIONS |
CB1000.1M2 |
CB600.4/CB1000.4 |
|
|
|
|
|
|
|
|
|
Ch1 |
|
|
|
Ch2 |
|
|
|
|
|
|
|
|
|
|
|
|
SPEAKER |
|
|
|
SPEAKER |
|
|
|
PWR |
LINE OUT |
LINE INPUT |
|
|
|
|
|
|
2~4Ohm |
CH1 |
|
CH2 |
2~4Ohm |
|
|
|
PRO |
|
R |
MAX |
OFF 25Hz |
0O 180O |
15Hz |
400Hz 0dB |
+18dB |
|
FUSES |
+12V |
REM |
GND |
|||
|
MIN |
SPEAKER |
|
|
|
|
|
|
||||||||
|
|
GAIN |
SUB SONIC |
PHASE |
LPF |
BASS BOOST REMOTE |
OUTPUT |
|
|
|
|
|
|
|||
|
|
L |
|
|
|
|
|
|
|
|
|
|
POWER |
|
INPUT |
|
|
|
L |
|
|
|
|
|
|
|
CH3 |
BRIDGED |
CH4 |
|
|
R |
CAR STEREO |
Ch3 |
|
Ch4 |
|
SPEAKER |
|
SPEAKER |
CB600.4:30Ax2 |
2~4Ohm |
|
2~4Ohm |
CB1000.4:35Ax2
CB1000.1D/CB1500.1D/CB1500.1D2/CB2500.1D/ CB1500.4/CB2000.4
CB2500.1D2/CB3500.1D/CB5000.1D
PWR |
LINE OUT LINE INPUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
PRO |
|
|
R |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
Min Max |
OFF 25Hz |
|
0O 180O |
|||||||||||||
PRO |
|
|
|
|||||||||||||||
|
|
|
|
GAIN |
SUB SONIC |
|
PHASE |
L
15Hz 400Hz 0dB +18dB
LPF BASS BOOST REMOTE
IN |
Ch1 |
|
Ch2 |
|
SPEAKER |
|
SPEAKER |
|
2~4Ohm |
|
2~4Ohm |
|
BRIDGED |
|
|
|
OUT |
CH1 |
|
CH2 |
R |
L |
OUTPUTSPEAKER |
|
|
CAR STEREO |
CH3 |
BRIDGED |
CH4 |
FUSES |
+12V |
REM |
GND |
|
POWER |
|
INPUT |
Ch3 |
|
Ch4 |
CB1500.4:30Ax3 |
SPEAKER |
SPEAKER |
CB2000.4:35Ax3 |
|
2~4Ohm |
2~4Ohm |
|
9 |
10 |