Maytag MEW9627AW, MEW9627AB, MEW9630AB, MEW7530AW, MEW9527AW Dimension Guide

...
0 (0)
Maytag MEW9627AW, MEW9627AB, MEW9630AB, MEW7530AW, MEW9527AW Dimension Guide

27" (68.6 CM) AND 30" (76.2 CM)

ELECTRIC SINGLE AND DOUBLE BUILT-IN OVEN

PRODUCT MODEL SERIES

MEW7527A MEW9627A MEW9530A MEW7627A MEW7530A MEW9630A MEW9527A MEW7630A

Electrical:

To properly install your oven, you must determine the type of electrical connection you will be using and follow the instructions provided for it here.

Oven must be connected to the proper electrical voltage and frequency as specified on the model/serial number rating plate. The model/serial number rating plate is located under the control panel on single ovens and under the control panel on the upper oven cavity on double ovens. See the following illustrations.

A A

Single Oven

Double Oven

A. Model/serial number plate

A. Model/serial number plate

Models rated from 7.3 to 9 kW at 240 volts (5.4 to 7.4 kW at 208 volts) require a separate 40-amp circuit. Models rated at 4.8 kW and below at 240 volts (3.6 kW and below at 208 volts) require a separate 20-amp circuit.

A circuit breaker is recommended.

Connect directly to the circuit breaker box (or fused disconnect) through flexible, armored or nonmetallic sheathed, copper cable (with grounding wire). See “Make Electrical Connection” section.

Flexible conduit from the oven should be connected directly to the junction box.

Fuse both sides of the line.

Do not cut the conduit. The length of conduit provided is for serviceability of the oven.

A UL listed or CSA approved conduit connector must be provided.

If the house has aluminum wiring, follow the procedure below: 1. Connect a section of solid copper wire to the ends of the

flexible conduit leads.

2. Connect the aluminum wiring to the added section of copper wire using special connectors and/or tools designed and UL listed for joining copper to aluminum.

Follow the electrical connector manufacturer's recommended procedure. Aluminum/copper connection must conform with local codes and industry accepted wiring practices.

For power requirements for models MEW7527A, MEW7530A, MEW7627A, MEW7630A, MEW9537A, MEW9627A, MEW9530A and MEW9630A, refer to the following table.

Voltage

Single

Single

Double

Double

 

Thermal

Convect

Thermal

Convect

240 VAC

3690 W

3720 W

7370 W

7400 W

 

 

 

 

 

208 VAC

2790 W

2820 W

5580 W

5610 W

240 VAC

15.4 A

15.5 A

30.7 A

30.8 A

 

 

 

 

 

208 VAC

13.4 A

13.6 A

26.8 A

27.0 A

 

 

 

 

 

PRODUCT DIMENSIONS

B

C

A

E

D

 

27" (68.6 cm) models

30" (76.2 cm) models

A. 28³⁄¾" (72.8 cm) max. overall

A. 28³⁄¾" (72.8 cm) max. overall

height

height

B. 25 ⁄ " (64.6 cm) max. recessed

B. 28¹⁄½" (72.4 cm) max. recessed

width

width

C. 26³⁄ " (67.9 cm) recessed

C. 26³⁄ " (67.9 cm) recessed

height

height

D. 23¹⁄ " (59.1 cm) max. recessed

D. 23¹⁄ " (59.1 cm) max. recessed

depth

depth

E. 27" (68.6 cm) overall width

E. 30" (76.2 cm) overall width

B

A

C

E

D

27" (68.6 cm) models

30" (76.2 cm) models

A. 51³⁄ " (130.0 cm) max. overall

A. 51³⁄ " (130.0 cm) max. overall

height

height

B. 25 ⁄ " (64.6 cm) max.

B. 28¹⁄½" (72.4 cm) max. recessed

recessed width

width

C. 48¹³⁄ " (124.0 cm) recessed

C. 48¹³⁄ " (124.0 cm) recessed

height

height

D. 23¹⁄ " (59.1 cm) max.

D. 23¹⁄ " (59.1 cm) max. recessed

recessed depth

depth

E. 27" (68.6 cm) overall width

E. 30" (76.2 cm) overall width

 

Page 1 of 2

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation

Ref. W10351242

Instructions packed with product. Specifications subject to change without notice.

2/15/12

Loading...
+ 1 hidden pages