Maytag MFB2055FRZ, MFB2055YEB, MFB2055YEM, MFB2055YEW, MFB2055FRH Dimension Guide

Bottom Mount Refrigerator

PRODUCT MODEL NUMBER

PRODUCT DIMENSIONS

MFB2055YE

MFB2055FR

Electrical: A 115-volt, 60-Hz, AC-only, 15or

H

20-amp fused, grounded electrical supply is

required. It is recommended that a separate

G

circuit serving only your refrigerator be

cabinet

I

provided. Use an outlet that cannot be turned

F

off by a switch. Do not use an extension cord.

C

not incl.

NOTE: Before performing any type of

handle

installation, cleaning, or removing a light bulb,

turn the control (Thermostat, Refrigerator or

E

A

90˚

90˚

Freezer Control depending on the model) to

incl.

overall

OFF and then disconnect the refrigerator from

handle

the electrical source. When you are finished,

B

reconnect the refrigerator to the electrical

top of

source and reset the control (Thermostat,

cabinet

Refrigerator or Freezer Control depending on

the model) to the desired setting. See “Using

the Controls.”

Water: A cold water supply with water

pressure between 30 and 120 psi (207 and

827 kPa) is required to operate ice maker and

D

water dispenser. If you have questions about

your water pressure, call a licensed, qualified

plumber.

IMPORTANT: The pressure of the water

coming out of a reverse osmosis system

going to the water inlet valve of the

Depth -

Depth -

Depth -

Width -

refrigerator needs to be between 30 and 120

Height- -

HeightDepth-

-

DepthDepth-

-

-

Width -

psi (207 and 827 kPa).

DoorsDepthOpen -

WithDepth -WithoutDepthDepth-

WidthDoor Open-

Model

Height -

OverallTop of

TopDoforsCabinetOpen

90°Drawer Drawer OpenWith

HandlesWithoutHandlesCabinetCabinet OnlyWidthCabinet- Door Open90°

Reverse Osmosis Water Supply: If a reverse

NumberModel ModelOverallSize

Cabinet“A”

“B”90°

“C”Open

“D”Handles

“E”Handles

“F”

Only

“G”

Cabinet“H”

90°“I”

osmosis water filtration system is connected

Size

“A”

“B”

“C”

“D”

51

11

“E”

34C⁄v"

“F”

31

11

\16"

“G”

27M\,"

“H”

“I”

MFB2055YE

19.6 cu. ft.

68Z\x"

67Z\x"

43B⁄,"

\16"

29Z\x"

37B⁄,"

to your cold water supply, the water pressure

68¹⁄"

(174 cm)

(171.5 cm)

(110.8 cm)

(131.9 cm)

(88.3 cm)

(80.5 cm)

(70.8 cm)

29

(74.9 cm)

(95.6 cm)

to the reverse osmosis system needs to be a

19.6 cu.ft.

67¹⁄"

43⁄"

51¹ ⁄"

34³⁄"

31¹¹⁄"

27⁄"

¹⁄"

37⁄"

cm)

(171.5 cm)

(110.8 cm)

(131.9 cm) (88.3 cm)

(80.5 cm)

1

(70.8 cm)

1

1

minimum of 40 to 60 psi (276 to 414 kPa).

MFB2055FR

(17419. cu. ft

68C\,"

67Z\x"

44 ⁄,"

52Z\x"

34C\,"

32

⁄4"

28"

30

⁄,"

33

⁄4"

(173.7 cm)

(171.5 cm)

(112.1 cm)

(133.4 cm)

(87.3 cm)

(81.9 cm)

(71.1 cm)

(76.5 cm)

(84.5 cm)

LOCATION REQUIREMENTS

To ensure proper ventilation for your refrigerator, allow for a ¹⁄" (1.25 cm) of space on each side and at the top. Allow for a 1" (2.54 cm) space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When installing your refrigerator next to a fixed wall, leave a 2" (5.08 cm) minimum space between the refrigerator and wall to allow the door to swing open.

		¹⁄" (1.25 cm)				NOTE: This refrigerator is intended for use in a location where the temperature ranges
						from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room
						temperature range for optimum performance, which reduces electricity usage and
						provides superior cooling, is between 60°F (15°C) and 90°F (32°C). It is recommended
						that you do not install the refrigerator near a heat source, such as an oven or radiator.

2" (5.08 cm)

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation	Ref. W10460643C
Instructions packed with product. Specifications subject to change without notice.	5/16