Electric Dryer
PRODUCT MODEL NUMBERS
MEDX500X, MEDX550X, MEDX600X,
MEDX700A, MEDX700X
Installation clearances:
The location must be large enough to allow the dryer door to open fully.
Dryer Dimensions
43" (1092 mm)
*291/2"
(749 mm)
23¾" (603 mm)
43" (1092 mm)
*291/2" 27" (749 mm)
(687 mm)
A
A.Large opening side-swing door
B.Wide opening hamper door
13¾" (349 mm)
27" (687 mm)
B
*Most installations require a minimum 5½" (140 mm) clearance behind the dryer for the exhaust vent with elbow. See “Venting Requirements.”
Minimum spacing for recessed area or closet installation
|
|
|
|
3"* |
|
14"max.* |
48 in.2* |
|
(76 mm) |
|
(356 mm) |
|
|
|
18"* |
(310 cm )2 |
|
|
|
(457 mm) |
|
|
|
|
|
|
24 in2.* |
2 |
3"* |
|
|
(155 cm ) |
(76 mm) |
1" |
|
|
27" |
1" |
|
|
|
1"* |
|
29¼" |
5½"* |
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
||||||
(25 mm) |
(686 mm) |
(25 mm) (25mm) (743mm) (140mm) |
||||||||||||
|
|
|
A |
|
|
|
|
|
|
B |
|
|
|
C |
A.Recessed area
B.Side view – closet or confined area
C.Closet door with vents
Installation spacing for recessed area or closet installation
The dimensions shown below are the recommended spacing for this dryer.
■■ Additional spacing should be considered for ease of installation and servicing.
■■ Additional clearances might be required for wall, door, floor moldings, and dryer venting.
■■ Additional spacing of 1" (25 mm) on all sides of the dryer is recommended to reduce noise transfer.
■■ For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required. Louvered doors with equivalent ventilation openings are acceptable.
■■ Companion appliance spacing should also be considered.
W10115226C
02/2012