LG TSNH121TNW2, VM122CS, SP121HN NTM2, TSUH121TNW2, SP121HN USM2 Owner's Manual

...

0 (0)

www.lg.com

TYPE : WALL MOUNTED INVERTER

P/NO : MFL63288121

ENGLISH ESPAÑOL

OWNER’S MANUAL

Please read this manual carefully before operating your set and retain it for future reference.

AIR CONDITIONER

TIPS FOR SAVING ENERGY

ENGLISH

TIPS FOR SAVING ENERGY

Here are some tips that will help you minimize the power consumption when you use the air conditioner. You can use your air conditioner more efficiently by referring to the instructions below:

• Do not cool excessively indoors. This may be harmful for your health and may consume more electricity.

• Block sunlight with blinds or curtains while you are operating the air conditioner.

• Keep doors or windows closed tightly while you are operating the air conditioner.

• Adjust the direction of the air flow vertically or horizontally to circulate indoor air.

• Speed up the fan to cool or warm indoor air quickly, in a short period of time.

• Open windows regularly for ventilation as the indoor air quality may deteriorate if the air conditioner is used for many hours.

• Clean the air filter once every 2 weeks. Dust and impurities collected in the air filter may block the air flow or weaken the cooling / dehumidifying functions.

For your records

Staple your receipt to this page in case you need it to prove the date of purchase or for warranty purposes. Write the model number and the serial number here:

Model number :

Serial number :

You can find them on a label on the side of each unit.

Dealer’s name :

Date of purchase :

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

WARNING: Before accessing the terminals, all power circuits must be disconnected.

WARNING: Fixed installations will incorporate disconnect means in accordance with installation

rules.

WARNING: This device will not be accessible to public.

WARNING: The appliance must be installed in accordance with national regulations for electrical

installations.

SAFETY PRECAUTIONS

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product

WARNING

It can result in serious injury or death when the directions are ignored

CAUTION

It can result in minor injury or product damage when the directions are ignored

WARNING

• Installation or repairs made by unqualified persons can result in hazards to you and others.

• Appliance shall be installed in accordance with national wiring regulations.

• The information contained in the manual is intended for use by a qualified service technician familiar with safety procedures and equipped with the proper tools and test instruments.

• Failure to carefully read and follow all instructions in this manual can result in equipment malfunction, property damage, personal injury and/or death.

Installation

• Use a standard circuit breaker and fuse conforming with the rating of the air conditioner. Failure to do so may result in electric shock or product failure.

• Contact an authorized service center when you install or relocate the air conditioner. Failure to do so may result in serious injury or product failure.

• Always use a power plug and socket with a ground terminal.Failure to do so may result in electric shock or product failure

• Install the panel and the cover of the control box safely. Failure to do so may result in explosion or fire.

• Install a dedicated electric outlet and circuit breaker before you use the air conditioner. Failure to do so may result in electric shock or product failure.

• Use a standard circuit breaker and fuse conforming with the rating of the air conditioner. Failure to do so may result in electric shock or product failure.

• Do not modify or extend the power cable. If the power cable or cord has scratches or skin peeled off or deteriorated then it must be replaced. It may result in fire or electric shock.

• Be cautious when you unpack or install the air conditioner. Failure to do so may result in serious injury or product failure.

• Do not install the air conditioner on an unstable surface or where there may be a danger of it falling. It may result in death, serious injury, or product failure.

• Use inflammable gas (nitrogen) to inspect leak and to purge air, using compressed air or flammable gas may cause fire or explosion.

ENGLISH

SAFETY PRECAUTIONS

ENGLISH

Operation

• Do not let the air conditioner run for a long time when the humidity is very high or when a door or window has been left open. Failure to do so may result in product failure.

• Make sure that the power cord is not pulled or damaged while the air conditioner is operating. Failure to do so may result in fire, electric shock, or product failure.

• Do not place any objects on the power cord. It may result in electric shock or product failure.

• Do not turn on or off the air conditioner by plugging in or unplugging the power plug. It may result in fire or electric shock.

• Do not touch, operate or repair the air conditioner with wet hands. It may result in electric shock or product failure.

• Do not place a heater or other heating appliances near the power cable. It may result in fire, electric shock, or product failure.

• Do not allow water to run into the air conditioner. It may result in explosion or fire.

• Do not leave flammable substances such as gasoline, benzene and thinner near the air conditioner. It may result in explosion or fire.

• Do not use the air conditioner for an extended period of time in a small place without ventilation. Ventilate the place regularly. Failure to do so may result in explosion or fire.

• When there is a gas leak, ventilate sufficiently before using the air conditioner again. Failure to do so may result in explosion or fire.

• Unplug the power plug if there is a noise, smell or smoke coming from the air conditioner. Failure to do so may result in explosion or fire.

• Stop operating and close the window in strom or hurricane.If possible remove the product from the window before hurricane arrives

• Do not touch the electrostatic filter after opening the front grille. Failure to do so may result in electric shock or product failure.

• Contact an authorized service center when the air conditioner is submerged into water due to flooding. Failure to do so may result in explosion or fire.

• Be cautious water could not enter the product

• Make sure to ventilate sufficiently when this air conditioner and a heating appliance such as a heater are used simultaneously. Failure to do so may result in fire, serious injury, or product failure.

• Turn the main power off and unplug the power plug when you clean or repair the air conditioner. Failure to do so may result in death, serious injury, or product failure.

• Unplug the power plug when the air conditioner is not used for an extended period of time. Failure to do so may result in product failure.

• Do not place any objects on the air conditioner. It may result in product failure.

• For inner cleaning, contact an Authorized Service Center or a dealer. Do not use harsh detergent that causes corrosion or damage on the unit. Harsh detergent may also cause failure of product, fire, or electronic shock.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

CAUTION

Installation

• Make sure to check if there is a refrigerant leak after you install or repair the air conditioner. Failure to do so may result in product failure.

• Install the drain hose properly for smooth drainage of condensed water. Failure to do so may result in product failure.

SAFETY PRECAUTIONS

• Keep level even when installing the product.

• Install the air conditioner where the noise from the outdoor unit or the exhaust gas will not inconvenience the neighbors. Failure to do so may result in conflict between neighbors.

• When transporting the equipment, there should be at least 2 or more people, or a forklift. It may result in serious injury.

• Do not install the air conditioner where it will be exposed to sea wind (salt spray) directly. It may result in product failure.

Operation

• Do not expose people, animals or plants to the cold or hot wind from the air conditioner. It may result in serious injury.

• Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a consumer air conditioner, not a precision refrigeration system. It may result in death, fire or electric shock.

• Do not block the inlet or outlet of air flow. It may result in explosion or product failure.

• Do not use strong cleaning agents or solvents when you clean the air conditioner, or spray water. Use a smooth cloth. It may result in serious injury or product failure.

• Never touch the metal parts of the air conditioner when you remove the air filter. It may result in serious injury or product failure.

• Do not place any objects on the air conditioner. It may result in product failure.

• Always insert the filter securely after cleaning. Clean the filter every two weeks or more often if necessary.

• Do not insert hands or other objects through the air inlet or outlet while the air conditioner is operating. It may result in electric shock.

• Do not drink the water drained from the air conditioner. It may result in serious health complications.

• Use a sturdy stool or ladder when you clean, maintain or repair the air conditioner at a height. Failure to do so may result in serious injury or product failure.

• Do not mix the batteries for the remote control with other types of batteries or mix new batteries with used batteries. Failure to do so may result in product failure.

• Do not recharge or disassemble the batteries. Failure to do so may result in explosion, fire or serious injury.

• Stop using the remote control if there is a battery fluid leak. If your cloth or skin is exposed to the battery fluid from a leak, wash it off with clean water. Failure to do so may result in serious injury.

• If you swallow the battery fluid from a leak, wash out the inside of your mouth thoroughly and then consult a doctor. Failure to do so may result in serious health complications.

WARNING

• Before accessing the terminals, all power circuits must be disconnected.

• Fixed installations will incorporate disconnect means in accordance with installation rules.

• This device will not be accessible to public.

• Install the device in accordance to national codes for electrical installations.

ENGLISH

TABLE OF CONTENTS

TIPS FOR SAVING ENERGY

3 IMPORTANT SAFETY

INSTRUCTIONS

7 BEFORE USE

7 Components

8 Using the remote control

9 - Inserting batteries

9 - Installing the remote control holder

10 BASIC FUNCTIONS

10 Cooling your room

11 - Setting the current time

10 Removing humidity

11 Airing your room

11 Adjusting the fan speed

11 Adjusting the air ﬂow direction

11 Setting the timer

12 - Turning on the air conditioner

automatically at a set time

12 - Turning off the air conditioner

automatically at a set time

12 - Canceling the timer setting

12 - Setting sleep mode

13 ADVANCED FUNCTIONS

13 Changing room temperature quickly

13 Remove room moisture quickly

14 Indoor air puriﬁcation

14 - Auto Clean operation

14 Auto operation

14 Auto Changeover operation

15 Energy saving cooling mode

15 Display screen brightness

15 Operating the air conditioner without the

remote control

16 Restarting the air conditioner

automatically

17 MAINTENANCE

18 Cleaning the air ﬁlter

18 Cleaning the 3M Filter

19 TROUBLESHOOTING

19 Self-diagnosis function

19 Before requesting service

TABLE OF CONTENTS

ENGLISH

Coolant piping

Connection wire

wire

Drain hose

Coolant piping

Connection

Drain hose

Air inlet vents

Air outlet

vents

Base plate

Air inlet vents

Air outlet

vents

Base plate

BEFORE USE

Components

Outdoor unit

Front grille

Air ﬁlter

Air inlet

On/ Off button Signal receiver

Operation lamp

Air outlet

Air deﬂector (Vertical louver & Horizontal vane)

3M Filter (Optional)

NOTE

The number of operation lamps and their locations may vary, depending on the model of the

air conditioner.

BEFORE USE

ENGLISH

Indoor unit

* The feature can be changed according a type of model.

Air inlet vents

Air outlet vents

Base plate

Connection wire

Drain hose

Coolant piping

BEFORE USE

ENGLISH

Using the remote control

You can operate the air conditioner more conveniently with the remote control. You will find the

buttons for the additional functions under the cover of the remote control.

Wireless remote control

VENTILADOR

AHORRO

TEMPORIZADOR

TEMP. DEL

CUARTO

OSCILA-

CIÓN

MODO

SUEÑO

ENCENDER

APAGAR

A/LIMPIEZA

Display screen

Control panel

* Some functions may not be supported, depending on the

model.

Control

panel

Display

screen

Description

an button : Air come out from the indoor unit below to the room without air temperature change.

leep mode auto button*: Sets the sleep mode auto operation.

emperature adjustment buttons: Ad-

justs the room temperature when cooling.

- O

n/Off button: Turns the power on/off.

ndoor fan speed button: Adjusts the

fan speed.

peration mode selection b Selects the operation mode. Cooling operation ( ) / Auto operation or auto changeover ( ) / Dehumidifying operation ( )

utton*:

et cooling/heating button*: Warms up or cools down the indoor temperature within a short period of time.

ET DRY* : Remove a large amount of indoor moisture. (Compared with Dehumidifying operation)

ir flow direction button: Adjusts the air

flow direction vertically.

emperature display button: Displays the room temperature. Press for 5 sec, conversion °C / °F

imer button: Sets the current time and the start / end time.

avigation and functions button*: Adjusts the time and sets the special functions.

: Auto clean / : Operates energy

saving cooling

et/clear button: Sets or cancels func-

tions.

eset button : Resets the remote control settings.

IGHT button: Adjusts the brightness

of the indoor unit display.

BEFORE USE

ENGLISH

Inserting batteries

Insert batteries before using the remote control. The battery type used is AAA (1.5 V)

1 Remove the battery cover.

2 Insert the new batteries and make sure

that the + and - terminals of the batteries are installed correctly.

3 Reattach the battery cover.

Installing the remote control holder

Install the holder where there is no direct sunlight to protect the remote control.

1 Choose a safe and easily-accessible place.

2 Fix the holder by fastening the 2 screws

firmly with a screwdriver.

3 Slide the remote control into the holder.

Point the remote control towards the signal receiver at the bottom of the air conditioner to operate it.

NOTE

If the display screen of the remote control starts to fade, replace the batteries.

NOTE

• The remote control may operate other electronic devices if pointed towards them. Make sure to point the remote control towards the signal receiver of the air conditioner.

• For proper operation, use a soft cloth to clean the signal transmitter and receiver.

Operating method

BASIC FUNCTIONS

ENGLISH

BASIC FUNCTIONS

Cooling your room

(Cooling operation)

1 Press to turn on the power. 2 Press repeatedly to select the cooling

operation.

- is displayed on the display screen.

3 Press or to set the desired tempera-

ture.

- The temperature range is 18°C(64°F) – 30°C(86°F)

Removing humidity

(Dehumidifying operation)

This mode removes excess moisture from an environment with high humidity or in the rainy season, in order to prevent mold from setting in. This mode adjusts the room temperature and the fan speed automatically to maintain the optimal level of humidity.

1 Press to turn on the power. 2 Press repeatedly to select the dehu-

midifying operation.

- is displayed on the display screen.

NOTE

• In this mode you cannot adjust the room temperature, as it is adjusted automatically. Also, the room temperature is not displayed on the display screen.

BASIC FUNCTIONS

ENGLISH

Airing your room

(Air Circulation operation)

This mode only circulates the indoor air without changing the room temperature. The cooling lamp lights up in air circulation mode.

1 Press | to turn on the power. 2 Press

to select the air circulation oper-

ation.

- E is displayed on the display screen.

3 Press

to adjust the fan speed.

Adjusting the fan speed

1 Press

repeatedly to adjust the fan

speed.

- Select 5if you want natural air. The fan speed adjusts automatically.

Adjusting the air ﬂow direction

1 To adjust the direction of the air flow hori-

zontally, press i repeatedly and select the desired direction.

- Select H to adjust the direction of the air

flow automatically.

Setting the timer

You can use the timer function to save energy and to use the air conditioner more efficiently.

Setting the current time

1 Press and hold it for longer than 3 sec-

onds.

- The AM/PM icon flickers at the bottom of the display screen.

NOTE

• Adjusting the air flow direction vertically may not be supported, depending on the model.

• Adjusting the air deflector arbitrarily may cause product failure.

• If you restart the air conditioner, it starts to operate with the previously set direction of air flow, so the air deflector may not match the icon displayed on the remote control. When this occurs, press i to adjust the direction of the air flow again.

Remark Speed

High

Medium

Low

Natural Wind

BASIC FUNCTIONS

ENGLISH

2 Press

to select the minutes.

3 Press

to finish.

Turning on the air conditioner automatically at a set time

1 Press m.

- The icon below flickers at the bottom of the display screen.

2 Press

to select the minutes.

3 Press

to finish.

Turning off the air conditioner automatically at a set time

1 Press n.

- The icon below flickers at the bottom of the display screen.

2 Press

to select the minutes.

3 Press

to finish.

Canceling the timer setting

1 Press m. 2 Press m or n to select the timer setting

to cancel.

3 Press

- To cancel all timer settings, press

Setting sleep mode

Use the sleep mode to turn off the air conditioner automatically when you go to sleep.

1 Press | to turn on the power. 2 Press l 3 Press

to select the hour

(up to 7 hours).

4 Press

to finish.

T is displayed on the display screen in

sleep mode.

NOTE

In the Cooling and Dehumidifying modes, the temperature increases by 1°C after 30 minutes and by a further 1°C after another 30 minutes for a more comfortable sleep. The temperature increases with up to 2°C from the preset temperature.

NOTE

After setting the time. current time will be displayed.

NOTE

After setting the time. current time will be displayed.

ADVANCED FUNCTIONS

ENGLISH

ADVANCED FUNCTIONS

- In this mode, Indoor fan can be stopped for a few minutes.

- You can not use this function in Heating Operation and Auto Changeover Operation.

Remove room moisture quickly

(Jet Dry)

This mode allows you to remove a large amount of indoor moisture.

1 Press to turn on the power. 2 Press .

The air conditioner offers some additional advanced functions.

Changing room temperature quickly

(Jet Cool operation)

This mode allows you to cool indoor air quickly in summer.

1 Press to turn on the power. 2 Press .

- In jet cooling mode, strong air blows out at a temperature of 18°C for 30 minutes.

NOTE

• In Air Circulation and Auto mode, this

function cannot be used.

• This function may not be supported, de-

pending on the model.

NOTE

• In this mode you cannot adjust the room temperature, as it is adjusted automatically. Also, the room temperature is not displayed on the display screen.

• In this mode for a long time, you can feel the cold. (If you feel the cold, change to Dehumidifying operation.)

+ 28 hidden pages