OWNER’S MANUAL
Please read this manual carefully before operating your set and retain it for future reference.
EG96** EF95**
*MFL68823617* |
www.lg.com |
P/NO : MFL68823617 (1506-REV00) |
|
|
Printed in Korea |
|
A-2 TABLE OF CONTENTS
TABLE OF CONTENTS
A-3 SETTING UP THE TV
A-3 Attaching the stand
A-7 Tidying cables
A-8 MAKING CONNECTIONS
A-8 Antenna connection A-8 Satellite dish connection A-9 HDMI connection
A-10 - ARC (Audio return channel) A-10 DVI to HDMI connection A-11 Component connection A-12 Composite connection A-13 Headphone connection A-14 Audio connection
A-14 - Digital optical audio connection A-15 USB connection
A-16 CI module connection A-17 Euro scart connection
LANGUAGE LIST
ENGLISH
ITALIANO
B-1 SPECIFICATIONS
B-2 REGULATORY
COMMON
LANGUAGE
COMMON
SETTING UP THE TV
Image shown may differ from your TV.
Attaching the stand
55EG96**
1
Protective package
1
1
Stand cover
1 When assembling the stand, lay the front screen Protective package included in the product box on a table or product box and then place the TV screen face down on the Protective package.
CAUTION
yy Do not lift your TV without the stand. The protruding Joystick Button may be damaged.
2
SETTING UP THE TV A-3
3
M4 x L20
5 EA
4
Stand cover
Stand Assy
CAUTION
yy Insert the protruding parts of the Stand cover into the holes.
A-4 SETTING UP THE TV
5
Stand cover
Cover holder
CAUTION
yy Insert the Cover holder of the Stand cover into the holes until it clicks. Press the Stand cover gently so that the non-woven fabric inside is attached tightly.
65EG96**
1
Protective package
1
1
Stand cover
1 When assembling the stand, lay the front screen Protective package included in the product box on a table or product box and then place the TV screen face down on the Protective package.
CAUTION
yy Do not lift your TV without the stand. The protruding Joystick Button may be damaged.
2
Stand Assy
SETTING UP THE TV A-5
3 |
5 |
Stand cover
M4 x L20
8 EA
4
Cover holder
CAUTION
yy Insert the Cover holder of the Stand cover into the holes until it clicks. Press the Stand cover gently so that the non-woven fabric inside is attached tightly.
Stand cover
CAUTION
yy Insert the protruding parts of the Stand cover into the holes.
A-6 SETTING UP THE TV
55EF95**
3
1
CAUTION
yy Do not lift your TV without the stand. The protruding Joystick Button may be damaged.
2
4
M4 x L14
6 EA
Stand Assy |
Stand cover |
|
CAUTION
yy Insert the protruding parts of the Stand cover into the holes.
5
Stand cover
Cover holder
CAUTION
yy Insert the Cover holder of the Stand cover into the holes until it clicks.
NOTE
yy Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.
CAUTION
yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
yy Make sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed.)
Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly.
SETTING UP THE TV A-7
Tidying cables
Image shown may differ from your TV.
Gather and bind the cables with the Cable holder.
Cable holder
CAUTION
yy Do not move the TV by holding the Cable holder, as the Cable holder may break, and injuries and damage to the TV may occur.
A-8 MAKING CONNECTIONS
MAKING CONNECTIONS
This section on MAKING CONNECTIONS mainly uses diagrams for the EG9609 models.
Antenna connection
(*Not
provided)
Wall antenna socket
English
Connect the TV to a wall antenna socket with an RF cable (75
Italiano
Collegare il televisore all’antenna centralizzata con un cavo RF
|
|
NOTA |
|
yy Il |
del dispositivo esterno può variare |
||
|
|
al modello. |
yy Utilizzare uno sdoppiatore del segnale per usare più di 2 televisori.
yy Se la qualità dell’immagine è scarsa, installare correttamente un amplificatore del segnale per migliorarla.
yy Se la qualità dell’immagine è scarsa con un’antenna collegata, provare a riallineare l’antenna nella direzione corretta.
yy Il cavo e il convertitore dell’antenna non sono in dotazione.
yy Audio DTV supportato: MPEG, Dolby Digital, Dolby Digital Plus, HE-AAC
yy Per posizioni non supportate da broadcasting ULTRA HD, il TV non è in grado di ricevere direttamente programmi ULTRA HD. (in base al modello)
Satellite dish connection
(Only satellite models)
|
NOTE |
yy |
device connection may differ from the |
yy Use a signal splitter to use more than 2 TVs.
yy If the image quality is poor, install a signal amplifier properly to improve the image quality.
yy If the image quality is poor with an antenna connected, try to realign the antenna in the correct direction.
yy An antenna cable and converter are Not provided.
yy Supported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus, HE-AAC
yy For a location that is not supported with ULTRA HD broadcasting, this TV cannot receive ULTRA HD broadcasts directly. (Depending on model)
(*Not provided)
Satellite
Dish
English
Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω).
Italiano
Collegare la TV a un’antenna satellitare e a una presa satellitare con un cavo RF satellitare (75 Ω).
MAKING CONNECTIONS A-9
HDMI connection
(*Not provided)
DVD / Blu-Ray / PC /
HD Cable Box / HD STB
English
Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown.
Picture HDMI ULTRA HD Deep Colour :
yy On - Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0) yy Off - Support 4K @ 50/60 Hz (4:2:0)
If the device connected to Input Port also supports ULTRA HD Deep Colour, your picture may be clearer.
However, if the device doesn’t support it, it may not work properly.
In that case, connect the device to a different HDMI port or change the TV’s HDMI ULTRA HD Deep Colour setting to Off. (This feature is available on certain models which are supported ULTRA HD Deep Colour only. )
|
NOTE |
|
y |
device connection may differ from the |
|
|
model. |
yy It is recommended to use the TV with the HDMI connection for the best image quality.
yy Use the latest High Speed HDMI™ Cable with CEC (Customer Electronics Control) function.
yy High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher.
yy Supported HDMI Audio format : Dolby Digital (32Khz, 44.1Khz, 48Khz), DTS(44.1Khz, 48Khz), PCM (32Khz, 44.1Khz, 48Khz, 96Khz, 192Khz)
Italiano
Il segnale digitale audio e video viene trasmesso da un dispositivo esterno al televisore. Collegare il dispositivo esterno e il televisore mediante il cavo HDMI come mostrato nell’illustrazione di seguito.
Immagine HDMI ULTRA HD Deep Colour :
yy Attiva - Supporto 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0) yy Disattiva - Supporto 4K @ 50/60 Hz (4:2:0)
Se il dispositivo collegato alla porta Ingresso supporta anche ULTRA HD Deep Colour, l'immagine sarà più chiara. Tuttavia, se la funzionalità non è supportata, il dispositivo potrebbe non funzionare correttamente.
In tal caso, collegare il dispositivo a una porta HDMI diversa o modificare l'impostazione HDMI ULTRA HD Deep Colour della TV su Disattiva.
Questa funzione è disponibile su alcuni modelli che supportano solo ULTRA HD Deep Colour.
NOTA
yy Il collegamento del dispositivo esterno può variare in base al modello.
yy Si consiglia di utilizzare il televisore con il collegamento HDMI per ottenere la migliore qualità delle immagini.
yy Utilizzare un cavo HDMI™ ad alta velocità dotato dei requisiti più recenti con funzione CEC (Customer Electronics Control).
yy I cavi HDMI™ ad alta velocità sono testati per trasmettere un segnale HD fino a 1080p e superiore.
yy Formato audio HDMI supportato: Dolby Digital(32Khz, 44.1Khz, 48Khz), DTS(44.1Khz, 48Khz), PCM(32Khz, 44.1Khz, 48Khz, 96Khz, 192Khz)
A-10 MAKING CONNECTIONS
ARC (Audio return channel) |
DVI to HDMI connection |
English
yy An external audio device that supports SIMPLINK and ARC must be connected using HDMI(4K @ 60 Hz)/DVI IN 2 (ARC) port.
yy When connected with a high-speed HDMI cable, the external audio device that supports ARC outputs optical SPDIF without additional optical audio cable and supports the SIMPLINK function.
Italiano
yy Per il collegamento di un dispositivo audio esterno che supporta le funzionalità SIMPLINK e ARC, usare la porta
HDMI(4K @ 60 Hz)/DVI IN 2 (ARC).
yy Se si effettua il collegamento con un cavo HDMI ad alta velocità, il dispositivo audio esterno che supporta ARC trasmette il segnale SPDIF senza il cavo ottico aggiuntivo e supporta la funzione SIMPLINK.
(*Not provided)
T
DVD / Blu-Ray / PC /
HD Cable Box / HD STB
English
Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown. To transmit an audio signal, connect an audio cable.
NOTE
yy Depending on the graphics card, DOS mode may not work if a DVI-HDMI cable is in use.
yy When using the DVI-HDMI cable , Single link is only supported.
Italiano
Il segnale digitale video viene trasmesso da un dispositivo esterno al televisore. Collegare il dispositivo esterno e
il televisore mediante il cavo DVI-HDMI come mostrato nell’illustrazione di seguito. Per trasmettere un segnale audio, collegare un cavo audio.
MAKING CONNECTIONS A-11
NOTA
yy A seconda della scheda grafica in uso, la modalità DOS potrebbe non funzionare se si utilizza un cavo DVI-HDMI.
yy Quando si utilizza il cavo DVI-HDMI, è supportata solo l’interfaccia Single link.
Component connection
IN
AV2 COMPONENT
VIDEO PR
YELLOW (Use the composite gender cable provided.)
GREEN
(Use the component gender cable provided.)
<![if ! IE]> <![endif]>YELLOW |
<![if ! IE]> <![endif]>WHITE |
<![if ! IE]> <![endif]>RED |
<![if ! IE]> <![endif]>GREEN |
<![if ! IE]> <![endif]>BLUE |
<![if ! IE]> <![endif]>RED |
|
<![if ! IE]> <![endif]>WHITE |
<![if ! IE]> <![endif]>RED |
<![if ! IE]> <![endif]>GREEN |
<![if ! IE]> <![endif]>BLUE |
<![if ! IE]> <![endif]>RED |
(*Not provided)
<![if ! IE]> <![endif]>WHITE |
<![if ! IE]> <![endif]>RED |
<![if ! IE]> <![endif]>GREEN |
<![if ! IE]> <![endif]>BLUE |
<![if ! IE]> <![endif]>RED |
L |
R |
|
|
|
AUDIO |
|
VIDEO |
|
|
DVD / Blu-Ray / HD Cable Box
A-12 MAKING CONNECTIONS
|
|
English |
|
Composite connection |
|
|
|
Transmits analogue video and audio signals from an external device to the TV. Connect the external device and the TV with a component gender cable as shown.
NOTE
are not installed correctly, it could cause to display in black and white or with
distorted colours.
Italiano
VIDEO
Il segnale audio e video analogico viene trasmesso da un dispositivo esterno al televisore. Collegare il dispositivo esterno e il TV con un cavo Component (o un cavo generico Component) come mostrato.
NOTA
yy L’errato collegamento dei cavi può far sì che le immagini vengano visualizzate in bianco e nero o con colori distorti.
YELLOW |
|
|
(Use the composite gender |
|
|
cable provided.) |
|
|
<![if ! IE]> <![endif]>YELLOW |
<![if ! IE]> <![endif]>WHITE |
<![if ! IE]> <![endif]>RED |
<![if ! IE]> <![endif]>YELLOW |
<![if ! IE]> <![endif]>WHITE |
<![if ! IE]> <![endif]>RED |
(*Not provided)
<![if ! IE]> <![endif]>YELLOW |
<![if ! IE]> <![endif]>WHITE |
<![if ! IE]> <![endif]>RED |
|
L(MONO) AUDIO R |
|
DVD / Blu-Ray /
HD Cable Box / VCR
English
Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown.
MAKING CONNECTIONS A-13
|
|
Italiano |
|
Headphone connection |
|
|
|
Il segnale audio e video analogico viene trasmesso da un dispositivo esterno al televisore. Collegare il dispositivo esterno e il TV con un cavo composito come mostrato.
Headphone |
(*Not provided) |
English
Transmits the headphone signal from the TV to an external device. Connect the external device and the TV with the headphone as shown.
NOTE
yy AUDIO menu items are disabled when connecting a headphone.
yy Optical Digital Audio Out is not available when connecting a headphone.
yy Headphone impedance: 16 Ω
yy Max audio output of headphone: 0.627 mW to 1.334 mW
yy Headphone jack size: 0.35 cm
Italiano
Consente la trasmissione del segnale delle cuffie dalla TV a un dispositivo esterno. Collegare il dispositivo esterno e la TV con le cuffie come mostrato nell’illustrazione di seguito.
NOTA
yy Le voci del menu AUDIO sono disabilitate se sono collegate le cuffie.
yy L’uscita audio ottica digitale non è disponibile se sono collegate le cuffie.
yy Impedenza cuffie: 16 Ω
yy Uscita audio max delle cuffie: da 0,627 mW a 1,334 mW
yy Dimensioni jack per cuffia: 0,35 cm
A-14 MAKING CONNECTIONS
Audio connection |
|
Italiano |
|
|
|
|
|
È possibile utilizzare un sistema audio esterno opzionale al posto dell’altoparlante integrato.
Collegamento audio ottico digitale
Il segnale audio digitale viene trasmesso dal televisore su un dispositivo esterno. Collegare il dispositivo esterno e il televisore con il cavo audio ottico come mostrato nell’illustrazione di seguito.
|
|
|
|
|
ATTENZIONE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
yy |
nella porta dell’uscita ottica. Guardare |
||
|
|
|
||||
|
|
|
|
|
laser potrebbe provocare danni alla vista. |
yy Contenuti audio con funzione anticopia (ACP, Audio Copy Protection) possono bloccare l’uscita audio digitale.
(*Not provided)
OPTICAL AUDIO IN
Digital Audio System
English
You may use an external audio system instead of the builtin speaker.
Digital optical audio connection
Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown.
CAUTION
yy Do not look into the optical output port. Looking at the laser beam may damage your vision.
yy Audio with ACP (Audio Copy Protection) function may block digital audio output.
MAKING CONNECTIONS A-15
USB connection |
|
Italiano |
|
|
|
|
|
Collegare una periferica di archiviazione USB, ad esempio una memoria flash USB, un hard disk esterno, o un lettore di schede di memoria USB al televisore e accedere al menu
per utilizzare diversi file multimediali.
NOTA
yy Alcuni hub USB potrebbero non funzionare. Se un dispositivo USB collegato tramite un hub USB non viene rilevato, collegarlo direttamente alla porta USB IN del TV.
yy Collegarsi all’alimentazione esterna se il dispositivo USB lo richiede.
yy Guida alla connessione per USB 3.0 : È possibile che alcune periferiche USB non funzionino se non
soddisfano lo standard USB 3.0. In tal caso, collegare la periferica alla porta USB IN 2 o USB IN 3.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HUB |
||||||
|
|
|
|
|||||||
HDD |
(*Not provided) |
|||||||||
(*Not provided) |
USB |
|||||||||
|
|
|||||||||
|
|
(*Not provided) |
English
Connect a USB storage device such as a USB flash memory, external hard drive or a USB memory card reader to the TV and access the Smart Share menu to use various multimedia files.
|
|
NOTE |
|
yy |
|
Hubs may not work. If a USB device |
|
|
connected through a USB Hub is not detected, |
||
|
connect it to the USB IN port on the TV directly. |
yy Connect the external power source if your USB is needed.
yy Connecting via USB 3.0 : Some USB device may not work if it does not meet USB 3.0 standard. In case, connect it to USB IN 2 or USB IN 3 port.
A-16 MAKING CONNECTIONS
CI module connection
NOTA
yy Verificare che il modulo CI sia inserito nello slot della scheda PCMCIA nel verso corretto. Se il modulo non è inserito nel modo corretto, possono verificarsi danni alla TV e allo slot stesso.
yy Se sul TV non viene visualizzato alcun segnale video e audio dopo aver collegato la scheda CI/CI+ CAM, contattare il provider del servizio a cui è stata effettuata la registrazione.
(*Not provided)
<![if ! IE]><![endif]>SLOTCARD
<![if ! IE]><![endif]>PCMCIA
English
View the encrypted (pay) services in digital TV mode.To watch pay services, you need to subscribe and get CI/CI+ card from pay TV operator. This feature depends on pay TV operator.
NOTE
yy Check if the CI module is inserted into the PCMCIA CARD SLOT in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA CARD SLOT.
yy If the TV does not display any video and audio when CI/CI+ CAM is connected, Please contact to pay service provider which you subscribe.
Italiano
Consente la visione dei servizi codificati (a pagamento) in modalità TV digitale. Per i servizi a pagamento, è necessario iscriversi e richiedere una scheda CI/CI+ all'operatore della TV a pagamento. Questa funzione dipende dall'operatore della TV a pagamento.
MAKING CONNECTIONS A-17
Euro scart connection
|
|
NOTE |
|
yy |
|
scart cable used must have a signal shield. |
|
yy |
|
watching digital TV in 3D imaging mode, only |
|
|
2D out signals can be output through the SCART |
||
|
cable. |
yy If you use the Time Machine function on digital TV, TV out signals cannot be output through the SCART cable.
Italiano
Consente la trasmissione dei segnali audio e video da un dispositivo esterno al televisore. Collegare il dispositivo esterno e il TV con un cavo generico Euro Scart come mostrato.
(Use the Scart cable provided -
Depending on model.)
(*Not provided)
English
Transmits the video and audio signals from an external device to the TV set. Connect the external device and the TV set with the Scart gender cable as shown.
Tipo di uscita |
|
Modalità |
AV1 |
(Uscita TV1) |
|
di ingresso |
|
corrente |
|
|
|
TV digitale |
TV digitale |
|
|
TV analogica, AV |
|
|
|
Component |
TV analogica |
|
|
HDMI |
|
|
|
1 Uscita TV : uscite segnali TV analogica o TV digitale.
NOTA
yy I cavi Euro Scart devono essere schermati.
yy Quando si guarda il TV digitale in modalità immagini 3D, solo i segnali di uscita 2D possono passare attraverso il cavo SCART.
yy Se si utilizza la funzione Time Machine sul TV digitale, i segnali di uscita del TV non potranno essere trasmessi tramite il cavo SCART.
Output |
|
Type |
AV1 |
Current |
(TV Out1) |
input mode |
|
|
|
Digital TV |
Digital TV |
|
|
Analogue TV, AV |
|
|
|
Component |
Analogue TV |
|
|
HDMI |
|
|
|
1 TV Out : Outputs Analogue TV or Digital TV signals.
A-18 MAKING CONNECTIONS
English
Connect various external devices to the TV and switch input modes to select an external device. For more information on external device’s connection, refer to the manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming
other external devices.
Italiano
Collegare diversi dispositivi esterni al televisore e modificare la modalità di ingresso per selezionare un dispositivo esterno. Per ulteriori informazioni sul collegamento di un dispositivo esterno, consultare il manuale fornito in dotazione con ciascun dispositivo.
È possibile collegare i seguenti dispositivi esterni : ricevitori HD, lettori DVD, VCR, sistemi audio, periferiche di archiviazione USB, PC, console per videogiochi e altri dispositivi
|
NOTE |
yy |
device connection may differ from the |
yy Connect external devices to the TV regardless of the order of the TV port.
yy If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual provided with the connected device.
yy Refer to the external equipment’s manual for operating instructions.
yy If you connect a gaming device to the TV, use the cable supplied with the gaming device.
yy In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.
yy In PC mode, some resolution settings may not work properly depending on the graphics card.
yy If ULTRA HD content is played via PC, the video or audio may have disruptions intermittently depending on your PC’s performance.
NOTA
del dispositivo esterno può variare al modello.
yy Collegare i dispositivi esterni al televisore a prescindere dall’ordine della porta del televisore.
yy Se si registra un programma TV su un registratore DVD o VCR, accertarsi di collegare il cavo di ingresso del segnale al televisore attraverso un registratore DVD o VCR. Per ulteriori informazioni sulla registrazione, consultare il manuale fornito in dotazione con il dispositivo collegato. Consultare il manuale dell’apparecchiatura esterna per le istruzioni operative.
yy Se si collega una console per videogiochi alla TV, utilizzare il cavo fornito con il dispositivo.
yy In modalità PC, possono essere presenti interferenze relative alla risoluzione, schemi verticali, contrasto o luminosità.
yy In caso di interferenze, modificare la modalità PC impostando un’altra risoluzione o modificando la frequenza di aggiornamento oppure regolare
luminosità e contrasto sul menu IMMAGINE finché non si ottiene un’immagine nitida.
yy A seconda della scheda grafica utilizzata, alcune impostazioni di risoluzione potrebbero non essere adatte alla modalità PC.
yy Se i contenuti ULTRA HD vengono riprodotti sul PC, il video o l’audio potrebbero interrompersi a seconda delle prestazioni del PC in uso.
OWNER’S MANUAL
OLED TV
Please read this manual carefully before operating your set and retain it for future reference.
www.lg.com
2 TABLE OF CONTENTS
TABLE OF CONTENTS
<![if ! IE]><![endif]>ENGLISH
3 LICENSES
3OPEN SOURCE SOFTWARE NOTICE INFORMATION
4SAFETY INSTRUCTIONS
11 - Viewing 3D Imaging
(Only 3D models)
13INSTALLATION PROCEDURE
14ASSEMBLING AND PREPARING
14 Unpacking
16Separate purchase
17Parts and buttons
18- Using the joystick button
19Lifting and moving the TV
20Mounting on a table
21Mounting on a wall
26 MAINTENANCE
26 Cleaning your TV
26- Screen, frame, cabinet and stand
26- Power cord
27TROUBLESHOOTING
27 SPECIFICATIONS
22 MAGIC REMOTE FUNCTIONS
24Registering magic remote
24How to use magic remote
25Precautions to Take when Using the Magic Remote
25 USING THE USER GUIDE
WARNING
yy If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
CAUTION
yy If you ignore the caution message, you may be slightly injured or the product may be damaged.
NOTE
yy The note helps you understand and use the product safely. Please read the note carefully before using the product.
LICENSES / OPEN SOURCE SOFTWARE NOTICE INFORMATION |
3 |
|
|
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
OPEN SOURCE SOFTWARE NOTICE INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com. This offer is
valid for three (3) years from the date on which you purchased the product.
<![endif]>ENGLISH
<![endif]>ENGLISH
4 SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
yy Do not place the TV and/or remote control in the following environments:
-- A location exposed to direct sunlight
-- An area with high humidity such as a bathroom
-- Near any heat source such as stoves and other devices that produce heat
-- Near kitchen counters or humidifiers where they can easily be exposed to steam or oil -- An area exposed to rain or wind
-- Near containers of water such as vases
Otherwise, this may result in fire, electric shock, malfunction or product deformation.
yy Do not place the product where it might be exposed to dust. This may cause a fire hazard.
yy Mains Plug is the TV connecting/disconnecting device to AC mains electric supply. This plug must remain readily attached and operable when TV is in use.
yy Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
yy Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured.
yy Insert power cable plug completely into wall socket otherwise if not secured completely into socket, fire ignition may break out.
yy Ensure the power cord does not come into contact with hot objects such as a heater. This may cause a fire or an electric shock hazard.
yy Do not place a heavy object, or the product itself, on power cables. Otherwise, this may result in fire or electric shock.
Desiccant
SAFETY INSTRUCTIONS |
5 |
yy Bend antenna cable between inside and outside building to prevent rain from flowing in. This may cause water damaged inside the Product and could give an electric shock.
yy When mounting TV onto wall make sure to neatly install and isolate cabling from rear of TV as to not create possibility of electric shock/fire hazard.
yy Do not plug too many electrical devices into a single multiple electrical outlet. Otherwise, this may result in fire due to over-heating.
yy Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product.
yy Keep the anti-moisture packing material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
yy Do not let your children climb or cling onto the TV.
Otherwise, the TV may fall over, which may cause serious injury.
yy Dispose of used batteries carefully to ensure that a small child does not consume them. Please seek DoctorMedical Attention immediately if child consumes batteries.
yy Do not insert any metal objects/conductors (like a metal chopstick/cutlery/screwdriver) between power cable plug and input Wall Socket while it is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal.
You may be electrocuted. (Depending on model)
yy Do not put or store inflammable substances near the product.
There is a danger of combustion/explosion or fire due to careless handling of the inflammable substances.
yy Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention. Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre.
<![endif]>ENGLISH
<![endif]>ENGLISH
6 SAFETY INSTRUCTIONS
yy Do not spray water on the product or scrub with an inflammable substance (thinner or benzene). Fire or electric shock accident can occur.
yy Do not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen.
You may be injured or the product can be damaged.
yy Never touch this product or antenna during a thunder or lighting storm. You may be electrocuted.
yy Never touch the wall outlet when there is leakage of gas, open the windows and ventilate. It may cause a fire or a burn by a spark.
yy Do not disassemble, repair or modify the product at your own discretion. Fire or electric shock accident can occur.
Contact the service centre for check, calibration or repair.
yy If any of the following occur, unplug the product immediately and contact your local service centre.
-- The product has been impacted by shock -- The product has been damaged
-- Foreign objects have entered the product
-- The product produced smoke or a strange smell This may result in fire or electric shock.
yy Unplug the TV from AC mains wall socket if you do not intend to use the TV for a long period of time.
Accumulated dust can cause fire hazard and insulation deterioration can cause electric leakage/shock/fire.
yy Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
yy Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.
yy If water enters or comes into contact with TV, AC adapter or power cord please disconnect the power cord and contact service centre immediately. Otherwise, this may result in electrice shock or fire.
yy Only use an authorized AC adapter and power cord approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction or product deformation.
yy Never Disassemble the AC adapter or power cord. This may result in fire or electric shock.
SAFETY INSTRUCTIONS |
7 |
|
|
CAUTION
yy Install the product where no radio wave occurs.
yy There should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls.
This may cause an electric shock.
yy Do not install the product on places such as unstable shelves or inclined surfaces. Also avoid places where there is vibration or where the product cannot be fully supported.
Otherwise, the product may fall or flip over, which may cause injury or damage to the product.
yy If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.
yy If you intend to mount the product to a wall, attach standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.
yy Only use the attachments / accessories specified by the manufacturer.
yy When installing the antenna, consult with a qualified service technician. If not installed by a qualified technician, this may create a fire hazard or an electric shock hazard.
yy We recommend that you maintain a distance of at least 2 to 7 times the diagonal screen size when watching TV.
If you watch TV for a long period of time, this may cause blurred vision.
yy Only use the specified type of battery.
This could cause damage to the remote control.
yy Do not mix new batteries with old batteries.
This may cause the batteries to overheat and leak.
yy Batteries should not be exposed to excessive heat. For example, keep away from direct sunlight, open fireplace and electric heaters .
yy Do not place non-rechargeable batteries in charging device.
<![endif]>ENGLISH
8 SAFETY INSTRUCTIONS
yy Make sure there are no objects between the remote control and its sensor.
<![if ! IE]><![endif]>ENGLISH
yy Signal from Remote Control can be interrupted due to external/internal lighting eg Sunlight, fluorescent lighting.
If this occurs turn off lighting or darken viewing area.
yy When connecting external devices such as video game consoles, make sure the connecting cables are long enough.
Otherwise, the product may fall over, which may cause injury or damage the product.
yy Do not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.)
It may cause mechanical failure or could give an electric shock.
yy Please follow the installation instructions below to prevent the product from overheating. -- The distance between the product and the wall should be more than 10 cm.
-- Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a cupboard).
-- Do not install the product on a carpet or cushion.
-- Make sure the air vent is not blocked by a tablecloth or curtain. Otherwise, this may result in fire.
yy Take care not to touch the ventilation openings when watching the TV for long periods as the ventilation openings may become hot. This does not affect the operation or performance of the product.
yy Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
yy Prevent dust collecting on the power plug pins or outlet. This may cause a fire hazard.
yy Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
yy Do not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it, as it may cause damage to screen.