ENGLISH
OWNER’S MANUAL
PLASMA TV
Please read this manual carefully before operating your set and retain it for future reference.
www.lg.com
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.
■ Image shown may differ from your TV
|
|
|
Owner’s Manual |
Batteries |
Power Cord |
|||
ENERGY SAVING |
POWER |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RATIO |
|
|
|
|
|
|
|
|
Q. MENU MENU |
FREEZE |
|
|
|
|
This item is not included for all models. |
||
|
|
|
RATIO |
POWER |
INPUT |
|
||
|
|
|
AV MODE |
|
ENERGY SAVING |
|
|
|
|
OK |
|
1 |
2 |
3 |
|
|
|
|
|
|
|
|
|
|||
|
|
|
4 |
5 |
6 |
|
|
|
RETURN |
SLEEP |
AV MODE |
7 |
8 |
9 |
|
|
|
|
|
|
|
|
* Lightly wipe any stains or fingerprints on |
|||
|
MARK |
AP |
LIST |
0 |
Q.VIEW |
|
|
|
|
FAV |
|
or |
|
|
|
|
|
|
|
G |
MUTE |
P |
GA |
|
|
|
|
|
E |
|
|
|
P |
|
the surface of the TV with the polishing |
|
MUTE |
|
|
|
|
E |
|
|
1 |
2 |
3 |
|
|
|
|
|
|
4 |
5 |
6 |
OK |
cloth. |
7 |
8 |
9 |
|
|
LIST |
0 |
Q.VIEW |
|
|
MENU RETURN |
|
|
Q.MENU FREEZE MARK |
Polishing Cloth |
Do not use excessive force. This may cause |
FAV |
|
|
|
Polishing cloth for use on |
scratching or discolouration. |
|
the screen. |
|
|
|
|
Remote Control |
|
|
x 2 |
|
x 4 |
|
Cable Holder |
|
Bolts for stand assembly |
|
(Refer to P 9) |
Protection cover |
||
(Refer to P 7) |
|||
|
(Refer to p. 9) |
||
|
|
Wall Mounting Bracket
(Separate purchase)
ACCESSORIES
AW-50PG60MS
1
|
CONTENTS |
|
|
ACCESSORIES....................................................... |
1 |
|
PREPARATION |
|
CONTENTS |
Stand Installation....................................................... |
7 |
|
Front Panel Controls................................................. |
4 |
|
Back Panel Information ............................................ |
6 |
|
Careful installation advice......................................... |
8 |
|
Back Cover for Wire Arrangement......................... |
9 |
|
Swivel Stand ................................................................ |
9 |
|
Not using the desk-type stand................................ |
9 |
|
Desktop Pedestal Installation................................. |
10 |
|
Wall Mount: Horizontal installation...................... |
10 |
|
ANTENNA CONNECTION ..................................... |
11 |
|
EXTERNAL EQUIPMENT SETUP |
|
|
HD Receiver Setup .................................................. |
12 |
|
DVD Setup ................................................................ |
15 |
|
VCR Setup................................................................. |
18 |
|
Other A/V Source Setup ........................................ |
21 |
|
Usb in Setup............................................................. |
21 |
|
PC Setup ................................................................... |
22 |
|
- Screen Setup for PC Mode........................... |
24 |
|
WATCHING TV / PROGRAMME CONTROL |
|
|
REMOTE CONTROL KEY FUNCTIONS ................ |
28 |
|
Turning on the TV ........................................................ |
32 |
|
Programme Selection................................................... |
32 |
|
Volume Adjustment ................................................... |
32 |
|
Quick Menu.................................................................... |
33 |
|
On Screen Menus Selection and adjustment....... |
34 |
|
Auto programme tuning ............................................ |
35 |
|
Manual programme Tuning ........................................ |
36 |
|
Programme Edit ........................................................... |
38 |
|
SELECTING THE PROGRAMME TABLE ................. |
40 |
|
Favourite programme setup........................................ |
41 |
|
Input LIST ....................................................................... |
42 |
|
SIMPLINK........................................................................ |
43 |
|
Input LABEL.................................................................... |
46 |
AV Mode ......................................................................... |
47 |
key Lock...................................................................... |
48 |
Initializing (Reset to original factory settings) .. |
49 |
TO USE THE USB DEVICE |
|
When connecting the USB device........................... |
50 |
Photo list......................................................................... |
51 |
Music list......................................................................... |
55 |
Movie list......................................................................... |
58 |
DivX Registration Code ............................................. |
62 |
Deactivation .................................................................. |
63 |
PICTURE CONTROL |
|
Picture Size (Aspect Ratio) Control........................ |
64 |
Energy Saving..................................................... |
66 |
Power Saving .................................................................. |
66 |
Preset picture settings |
|
Picture Mode-Preset ................................................. |
67 |
Auto Colour Tone Control |
|
(Warm/Medium/Cool) ............................................. |
68 |
Manual Picture Adjustment |
|
Picture Mode-User option ...................................... |
69 |
Picture Improvement Technology ............................ |
70 |
Advanced - Black(Darkness) Level........................... |
71 |
Advanced - Film Mode ................................................ |
72 |
Picture Reset.................................................................. |
73 |
Image Sticking Minimization (ISM) Method ......... |
74 |
Demo mode ................................................................... |
75 |
Mode setting.................................................................. |
76 |
2
SOUND & LANGUAGE CONTROL |
|
Auto Volume Leveler ................................................ |
77 |
Preset Sound Settings-Sound Mode.................... |
78 |
Sound Setting Adjustment -User Mode.............. |
79 |
SRS TruSurround XT................................................ |
79 |
Clear Voice II ............................................................. |
80 |
Balance........................................................................ |
81 |
Audio Reset ............................................................... |
82 |
TV Speakers On/ Off Setup .................................. |
83 |
I/II |
|
Stereo/Dual Reception......................................... |
84 |
NICAM Reception ................................................ |
85 |
Speaker Sound Output Selection...................... |
85 |
On-Screen Menu Language / |
|
Country Selection........................................................................ |
86 |
TIME SETTING |
|
Clock Setup ............................................................... |
87 |
Auto on/off timer setting ....................................... |
88 |
Sleep Timer setting.................................................. |
89 |
TELETEXT |
|
Switch on/off ........................................................... |
90 |
SIMPLE Text............................................................... |
90 |
TOP Text..................................................................... |
90 |
FASTEXT..................................................................... |
91 |
Special Teletext Functions ...................................... |
91 |
APPENDIX |
|
Troubleshooting........................................................ |
92 |
Maintenance.............................................................. |
94 |
Product Specifications ............................................ |
95 |
IR Codes ..................................................................... |
97 |
External Control Device Setup.............................. |
99 |
CONTENTS
3
PREPARATION
■ Image shown may differ from your TV.
CAUTION
G When the TV cannot be turned on with the remote control, press the main power button on the TV. (When the power is turned off with the main power button on the TV, it will not be turned on with the remote control.)
42/50PQ1***, 42/50PQ2***
Intelligent Sensor (Except
42/50PQ1***)
Adjusts picture according to the
surrounding conditions
Remote Control Sensor
Power/Standby Indicator
•Illuminates red in standby mode. •Illuminates blue when the TV is switched on.
INPUT |
MENU |
OK |
P |
INPUT |
MENU |
OK |
|
|
|
|
|
POWER |
VOLUME |
PROGRAMME |
4
42/50PQ3***
Intelligent Sensor
Adjusts picture accord-
ing to the surrounding
conditions.
Remote Control |
Sensor |
Power/Standby Indicator
•Illuminates red in standby mode. •Illuminates blue when the TV is switched on.
INPUT |
MENU |
OK |
P |
INPUT |
MENU |
OK |
VOLUME |
PROGRAMME |
POWER |
42/50PQ6***
Intelligent Sensor Adjusts picture according to the surrounding conditions.
Remote Control Sensor
Power/Standby Indicator
•Illuminates red in standby mode.
•The LED is off while the TV remains on.
P PROGRAMME
P
VOLUME
OK
OK MENU
MENU INPUT
INPUT
POWER
PREPARATION
5
PREPARATION
|
|
Only |
|
|
A Image shown may differ from your TV. |
42/50PQ2*** |
|
|
42/50PQ301* |
Only 42/50PQ3*** Only 42/50PQ6*** |
|
|
|
PREPARATION
|
|
|
|
|
9 |
1 |
|
|
|
|
|
2 |
3 |
|
4 |
|
|
|
|
|
COMPONENT |
|
|
|
|
|
|
IN |
|
|
|
|
Y |
VIDEO |
AUDIO IN |
|
AV 1 |
AV 2 |
(RGB/DVI) |
||
|
|
||||
|
|
|
|
SERVICE ONLY
VIDEO L/MONO AUDIO R USB IN
AV IN 3
2
|
USB IN |
HDMI IN3 |
USB IN |
|
|
AUDIO R |
AUDIO R |
|
L/MONO |
L/MONO |
|
VIDEO |
VIDEO |
|
AV IN 3 |
AV IN 3 |
3
AV 1 |
AV 2 |
|||
|
|
|
|
|
2
10
|
HDMI |
PB |
|
|
|
|
|
|
|
HDMI IN |
|
HDMI/DVI IN |
HDMI IN |
|
|
|
|
1 |
2 |
PR |
|
|
|
|
|
L |
AUDIO |
ANTENNA |
ANTENNA |
|
|
|
IN |
IN |
|
|
|
|
|
RS-232C IN |
RGB(PC) |
R |
RS-232C IN |
USB IN |
|
SERVICE ONLY |
|||||
(CONTROL&SERVICE) |
|
|
(CONTROL&SERVICE) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Only 42/50PQ1*** |
|
5 |
6 |
7 |
8 |
5 |
9 |
7 |
|
|
|
|
|
1Power Cord Socket
This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.
2HDMI Input
Connect a HDMI signal to HDMI IN
Or DVI(VIDEO)signal to HDMI/DVI(Except 42/50PQ1***) port with DVI to HDMI cable.
3Euro Scart Socket (AV1/AV2)
Connect scart socket input or output from an external device to these jacks.
4Component Input
Connect a component video/audio device to this jack.
5RS-232C Input (CONTROL&SERVICE) Port
Connect to the RS-232C port on a PC. This port is used for Service or Hotel mode.
6RGB Input
Connect the output from a PC.
7Antenna Input
Connect RF antenna to this jack.
8RGB/DVI Audio Input
Connect the audio from a PC or DTV.
9USB Input
42/50PQ1***, 42/50PQ2***, 42/50PQ301* : Service only
42/50PQ3*** : Used for Photo and Music 42/50PQ6*** : Used for Photo, Music and Movie
10Audio/Video Input(AV3)
Connect audio/video output from an external device to these jacks.
6
■ Image shown may differ from your TV |
PREPARATION |
|
■ When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, thep |
||
|
||
roduct can tilt forward after the product installation.) If you tighten the bolt with excessive force, the boltcan |
|
|
deviate from abrasion of the tightening part of the bolt. |
|
|
1 Carefully place the TV screen side down on a |
|
|
cushioned surface to protect the screen from |
|
|
damage. |
|
2Assemble the TV as shown.
3Fix the 4 bolts securely using the holes in the back of the TV.
! NOTE
GWhen assembling the stand, make sure to distinguish and assemble the front and rear side of the stand correctly.
FRONT
7
PREPARATION
PREPARATION
A You should purchase necessary components to fix the TV safety and secure to the wall from the market.
A Position the TV close to the wall to avoid the possibility of it falling when pushed.
A The instructions shown below are a safer way to set up the TV, by fixing it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.
1 |
2 |
1 |
2 |
1Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture. (If your TV has bolts in the eyebolts, loosen then bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
2Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall.
3
3Use a sturdy rope to tie the product for alignment. It is safer to tie the rope so it becomes horizontal between the wall and the product.
! NOTE
GWhen moving the TV undo the cords first.
GUse a platform or cabinet strong and large enough to support the size and weight of the TV.
GTo use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.
8
■ Image shown may differ from your TV.
After Connecting the cables as necessary, install CABLE HOLDER as shown and bundle the cables.
CABLE HOLDER |
PREPARATION |
This feature is not available for all models.
After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.
■ Here shown may differ from your TV.
When installing the wall-mounted unit, use the protection cover. Insert the PROTECTION COVER into the TV until clicking sound.
Protection cover
EARTHING
Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.
Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.
Power Supply
Circuit breaker
9
PREPARATION
PREPARATION
AThe TV can be installed in various ways such as on a wall, or on a desktop etc.
AThe TV is designed to be mounted horizontally.
For adequate ventilation allow a clearance of 4” (10cm) all around the TV.
|
4 inches |
|
4 inches |
4 inches |
4 inches |
A |
We recommend the use of a LG Brand wall mounting |
|
|
|
bracket when mounting the TV to a wall. |
A |
|
A |
We recommend that you purchase a wall mounting |
||
|
|||
|
bracket which supports VESA standard. |
B |
A LG recommends that wall mounting be performed by a qualified professional installer.
! NOTE
G Should Install wall mount on a solid wall perpendicular to the floor.
GShould use a special wall mount, if you want to install it to ceiling or slanted wall.
GThe surface that wall mount is to be mounted on should be of sufficient strength to support the weight of TV set; e.g. concrete, natural rock, brick and hollow block.
GInstalling screw type and length depends on the wall mount used. Further information, refer to the instructions included with the mount.
GLG is not liable for any accidents or damage to property or TV due to incorrect installation:
-Where a non-compliant VESA wall mount is used.
-Incorrect fastening of screws to surface which may cause TV to fall and cause personal injury.
-Not following the recommended Installation method.
4 inches
4 inches
4 inches |
4 inches |
Model |
VESA |
Standard |
Quantity |
|
(A * B) |
Screw |
|
42PQ1*** |
400 * 400 |
M6 |
4 |
50PQ1*** |
400 * 400 |
M6 |
4 |
42PQ2*** |
400 * 400 |
M6 |
4 |
50PQ2*** |
400 * 400 |
M6 |
4 |
42PQ3*** |
400 * 400 |
M6 |
4 |
50PQ3*** |
400 * 400 |
M6 |
4 |
42PQ6*** |
400 * 400 |
M6 |
4 |
50PQ6*** |
400 * 400 |
M6 |
4 |
4 inches
10
■ To prevent damage do not connect to the mains outlet until all connections are made between the devices.
■For optimum picture quality, adjust antenna direction.
■An antenna cable and converter are not supplied.
Wall |
Multi-family Dwellings/Apartments |
ANTENNA |
|
(Connect to wall antenna socket) |
|||
Antenna |
|||
|
IN |
||
Socket |
|
|
RF Coaxial Wire (75 ohm)
Outdoor
Antenna
(VHF, UHF) Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
|
UHF |
|
|
ANTENNA |
|
Antenna |
IN |
|
Signal |
||
|
||
|
Amplifier |
|
|
VHF |
■In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the antenna as shown above.
■If signal needs to be split for two TVs,use an antenna signal splitter for connection.
PREPARATION
11
SETUP EQUIPMENT EXTERNAL
■To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.
■Image shown may differ from your TV.
Connecting with a component cable (Except 42/50PQ1***)
1 |
Connect the video outputs (Y, PB, PR) of the digital set- |
|
|
|
|
|
top box to the COMPONENT IN VIDEO jacks on the |
|
|
|
|
|
TV. |
|
|
|
|
|
|
COMPONENT |
|
|
|
|
|
|
IN |
|
|
2 |
Connect the audio output of the digital set-top box to |
Y |
VIDEO |
(RGB/DVI) |
|
|
the COMPONENT IN AUDIO jacks on the TV. |
PB |
|
|
1 |
|
|
|
|
|
|
|
|
PR |
|
|
|
3 |
Turn on the digital set-top box. |
L |
AUDIO |
ANTENNA |
|
|
IN |
2 |
|||
|
|
|
|
||
|
(Refer to the owner’s manual for the digital set-top box.) |
R |
|
|
|
4Select Component input source using the INPUT button on the remote control.
Signal |
Component |
HDMI |
|
|
|
|
|
|
|
|
|
480i/576i |
O |
X |
|
480p/576p |
O |
O |
|
720p/1080i |
O |
O |
|
1080p |
O |
O |
|
|
(Only 50Hz, 60Hz) |
(24Hz, 30Hz, 50Hz, 60Hz) |
|
|
|
|
|
|
|
|
|
12
Connecting a set-top box with an HDMI cable
1Connect the HDMI output of the digital set-top box to the HDMI/DVI IN 1(or HDMI IN (Only
42/50PQ1***)), HDMI IN 2(Except 42/50PQ1***) or HDMI IN 3(Only 42/50PQ6***) models jack on the TV.
2Select HDMI1(or HDMI (Only 42/50PQ1***)), HDMI2(Except 42/50PQ1***) or HDMI3(Only 42/50PQ6***) input source using the INPUT button on the remote control.
3Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
!NOTE
G Check that your HDMI cable is version 1.3 or higher.
If the HDMI cables don’t support HDMI version 1.3, flickering or no screen display can result. Please use the latest cables that support at least HDMI version 1.3.
GHDMI mode supports PCM audio format only.
GAudio format was reseted to Dolby/DTS/Bitstrem in DVD Player or STB, it should be changed to PCM.
GWe recommed using under 10m of the HDMI cable.
When using over the length, connect a amplifier or repeater.
AV 1 |
AV 2 |
|
HDMI |
|
HDMI/DVI IN |
|
HDMI IN |
1 |
|
2 |
|
|
|
RS |
RGB(PC) |
(CONTROL |
) |
1 |
|
Only 42/50PQ1***
AV 1
HDMI IN
RS |
USB IN |
|
SERVICE ONLY |
||
(CONTROL&SERVICE) |
||
1 |
|
SETUP EQUIPMENT EXTERNAL
13
EXTERNAL EQUIPMENT SETUP
SETUP EQUIPMENT EXTERNAL
Connecting with a HDMI to DVI cable (Except 42/50PQ1***)
|
|
|
IN |
|
|
|
Y |
VIDEO |
AUDIO IN |
|
AV 1 |
(RGB/DVI) |
||
|
AV 2 |
|
|
|
|
HDMI |
PB |
|
|
HDMI/DVI IN |
HDMI IN |
|
|
|
1 |
2 |
PR |
|
|
|
|
L |
AUDIO |
ANTENNA |
|
|
|
IN |
|
|
|
|
|
|
RS |
RGB(PC) |
R |
|
|
(CONTROL&SERVICE)
2
1
1Connect the DVI output of the digital set-top box to the HDMI/DVI IN 1 jack on the TV.
2Connect the audio output of the digital set-top box to the AUDIO IN(RGB/DVI) jack on the TV.
3Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
4Select HDMI1 input source using the INPUT button on the remote control.
!NOTE
GHDMI mode supports PCM audio format only.
GAudio format was reseted to Dolby/DTS/Bitstrem in DVD Player or STB, it should be changed to PCM.
GWe recommed using under 10m of the HDMI cable.
When using over the length, connect a amplifier or repeater.
14
Connecting with a component cable (Except 42/50PQ1***)
1 |
Connect the video outputs (Y, PB, PR) of the DVD to the |
COMPONENT IN VIDEO jacks on the TV. |
2Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the TV.
3 Turn on the DVD player, insert a DVD.
4Select Component input source using the INPUT button on the remote control.
COMPONENT |
|
|
|
|
IN |
|
|
Y |
VIDEO |
(RGB/DVI) |
|
|
|
1 |
|
PB |
|
|
|
|
|
|
|
PR |
|
|
|
L |
AUDIO |
ANTENNA |
2 |
|
IN |
||
|
|
|
|
R |
|
|
|
5 Refer to the DVD player's manual for operating instructions.
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV |
Y |
PB |
PR |
|
|
|
|
|
|
|
|
|
Y |
PB |
PR |
Video output ports |
Y |
B-Y |
R-Y |
on DVD player |
Y |
Cb |
Cr |
|
Y |
Pb |
Pr |
|
|
|
|
SETUP EQUIPMENT EXTERNAL
15
EXTERNAL EQIPMENT SETUP
SETUP EQUIPMENT EXTERNAL
When connecting with a Euro Scart
Connect the Euro scart socket of the DVD to the AV1
1Euro scart socket on the set.
2Turn on the DVD player, insert a DVD.
3Select AV1 input source with using the INPUT button on the remote control.
|
|
COMPONENT |
|
|
|
|
|
IN |
|
|
|
Y |
VIDEO |
AUDIO IN |
AV 1 |
AV 2 |
(RGB/DVI) |
||
|
|
|
|
|
PB |
|
|
I/DVI IN |
|
|
|
|
1 |
|
PR |
|
|
|
|
L |
AUDIO |
ANTENNA |
|
|
|
IN |
|
|
|
|
|
|
32C IN |
RGB(PC) |
R |
|
|
&SERVICE) |
|
|
|
|
If connected to AV2 Euro scart socket, select AV2
input source.
1
4 Refer to the DVD player's manual for operating instructions.
|
|
(R) AUDIO (L) |
|
|
|
|
|
|
|
|
|
|
AUDIO/ |
|
|
VIDEO |
|
|
|
|
Only 42/50PQ1***
Scart |
|
Input |
|
|
Output |
|
Video |
Audio |
RGB |
|
Video, Audio |
AV 1 AV 2 |
|
|
|
|||||
|
|
|
||||
AV1 |
O |
O |
O |
|
ATV only |
|
AV2 |
O |
O |
X |
ATV output is available. |
|
|
|
Output Type |
AV1 |
|
AV2 |
|
ANTENNA |
|
|
|
IN |
|||
|
|
|
|
|
|
|
Current |
|
(TV Out) |
(Monitor Out) |
G TV Out : |
IN |
|
input mode |
|
Outputs analog |
VICE) SERVICE ONLY |
|||
Analogue TV |
O |
|
O |
|
||
|
TV signals. |
|
||||
|
|
|
|
|
|
|
AV1/2/3 |
O |
|
O |
Monitor Out: |
|
|
|
|
|
|
|
Outputs the |
1 |
Component/RGB/HDMI |
O |
|
X |
current screen |
|
|
|
image. |
|
||||
|
|
|
|
|
|
! |
NOTE |
|
|
G |
Any Euro scart cable used must be signal shielded. |
AUDIO/ |
(R) AUDIO (L) |
|
|
VIDEO |
|
16
Connecting the HDMI cable
1Connect the HDMI output of the DVD to the HDMI/DVI IN 1(or HDMI IN(Only
42/50PQ1***)), HDMI IN 2 (Except 42/50PQ1***) or HDMI IN 3(Only 42/50PQ6***) jack on the TV.
2Select HDMI1(or HDMI (Only 42/50PQ1***)), HDMI2 (Except 42/50PQ1***) or HDMI3 (Only 42/50PQ6***) input source using the INPUT button on the remote control.
3Refer to the DVD player's manual for operating instructions.
HDMI
HDMI/DVI IN |
HDMI IN |
|
|
|
|
|
|
|
|
|
|
|
|
1 2
RGB(PC)
1
! NOTE
GThe TV can receive video and audio signals simultaneously when using a HDMI cable.
GIf the DVD does not support Auto HDMI, you must set the output resolution appropriately.
GCheck that your HDMI cable is version 1.3 or higher.
If the HDMI cables don’t support HDMI version 1.3, flickering or no screen display can result. Please use the latest cables that support at least HDMI version 1.3.
GHDMI mode supports PCM audio format only.
GAudio format was reseted to Dolby/DTS/Bitstrem in DVD Player or STB, it should be changed to PCM.
GWe recommed using under 10m of the HDMI cable.
When using over the length, connect a amplifier or repeater.
Only 42/50PQ1***
AV 1 |
AV 2 |
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HDMI IN
RS |
USB IN |
|
) SERVICE ONLY |
||
(CONTROL |
1
SETUP EQUIPMENT EXTERNAL
17
EXTERNAL EQIPMENT SETUP
SETUP EQUIPMENT EXTERNAL
■ To avoid picture noise (interference), allow adequate distance between the VCR and TV.
Connecting with a RF cable
ANTENNA |
|
|
|
IN |
ANT OUT S-VIDEO VIDEO L |
R |
|
|
1 |
|
|
|
ANT IN |
OUTPUT |
|
|
SWITCH |
|
|
|
|
|
Wall Jack
2
Antenna
1Connect the ANT OUT socket of the VCR to the ANTENNA IN socket on the TV.
2 Connect the antenna cable to the ANT IN socket of the VCR.
3Press the PLAY button on the VCR and match the appropriate programme between the TV and VCR for viewing.
18
When connecting with a Euro Scart |
|
|
COMPONENT |
|
|
|
|
|
IN |
|
|
1 Connect the Euro scart socket of the VCR to the AV1 |
|
|
Y (RGB/DVI) |
||
|
|
|
|
VIDEO |
AUDIO IN |
Euro scart socket on the set. |
AV 1 |
AV 2 |
|
|
|
|
|
|
|
|
|
|
|
|
PB |
|
|
2 |
Insert a video tape into the VCR and press PLAY on |
I/DVI IN |
|
|
|
|
1 |
|
PR |
|
|
||
|
|
|
|
|
||
|
the VCR. (Refer to the VCR owner’s manual.) |
|
|
L |
AUDIO |
ANTENNA |
|
|
|
|
|
IN |
|
|
|
|
|
|
|
|
3 |
Select AV1 input source with using the INPUT |
2C IN |
RGB(PC) |
R |
|
|
&SERVICE) |
|
|
|
|
||
|
|
|
|
|
|
|
|
button on the remote control. |
|
|
|
|
|
If connected to AV2 |
Euro scart socket, select AV2 |
1 |
|
input source.
SETUP EQUIPMENT EXTERNAL
Scart |
|
Input |
|
|
Output |
AUDIO/ |
(R) AUDIO (L) |
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
Video |
Audio |
RGB |
|
Video, Audio |
VIDEO |
|
|
|
|
|
||||
AV1 |
O |
O |
O |
|
ATV only |
|
|
AV2 |
O |
O |
X |
ATV output is available. |
Only 42/50PQ1*** |
|
|
Current |
Output Type |
AV1 |
AV2 |
|
G TV Out : Outputs analog |
AV 1 AV 2 |
|
|
|
|
|
|
|||
input mode |
|
(TV Out) |
(Monitor Out) |
TV signals. |
|
|
|
Analogue TV |
O |
O |
|
|
|
||
|
Monitor Out: Outputs the |
|
|
||||
|
|
|
|
|
|
|
|
AV1/2/3 |
O |
O |
|
current screen image. |
|
ANTENNA |
|
|
|
|
|
|
|
|
IN |
|
|
|
|
|
|
IN |
|
Component/RGB/HDMI |
O |
X |
|
|
VICE) SERVICE ONLY |
|
|
|
|
|
|
||||
|
|
|
|
|
|
1 |
|
! NOTE
G Any Euro scart cable used must be signal shielded.
AUDIO/ |
(R) AUDIO (L) |
VIDEO |
|
19
EXTERNAL EQUIPMENT SETUP
SETUP EQUIPMENT EXTERNAL
When connecting with a RCA cable (Except 42/50PQ1***)
1Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red)
2 |
Insert a video tape into the VCR and press PLAY on |
USB IN |
|
R |
|||
|
the VCR. (Refer to the VCR owner’s manual.) |
||
|
AUDIO |
||
|
|
||
3 |
Select AV3 input source using the INPUT button on |
L/MONO |
|
VIDEO |
|||
|
the remote control. |
AV IN 3
! NOTE
G If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO jack of the set.
1
S-VIDEO VIDEO |
L |
R |
ANT IN |
OUTPUT |
|
|
ANT OUT |
SWITCH |
|
|
|
20
|
|
Camcorder |
1 |
Connect the AUDIO/VIDEO jacks between TV |
Video Game Set |
|
and external equipment. Match the jack colours. |
|
|
|
|
|
(Video = yellow, Audio Left = white, and Audio Right |
|
|
= red) |
|
2Select AV3 input source using the INPUT button on the remote control.
3Operate the corresponding external equipment. Refer to external equipment operating guide.
VIDEO L/MONO AUDIO R USB IN
VIDEO L R
1
AV IN 3
■ Image shown may differ from your TV.
USB IN |
1 |
|
1Connect the USB device to the USB IN jacks on the side of TV.
2 |
After connecting the USB IN jacks, you use the USB function. (G p. 50) |
|
|
|
|
SETUP EQUIPMENT EXTERNAL
21
EXTERNAL EQIPMENT SETUP
SETUP EQUIPMENT EXTERNAL
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
Connecting with a D-sub 15 pin cable
COMPONENT
IN
|
Y |
VIDEO |
AUDIO IN |
AV 1 |
(RGB/DVI) |
||
AV 2 |
|
|
HDMI |
PB |
|
HDMI/DVI IN |
HDMI IN |
|
1 |
2 |
PR |
|
|
L |
AUDIO |
ANTENNA |
|
|
|
IN |
|
|
|
|
|
|
RS-232C IN |
RGB(PC) |
R |
|
|
(CONTROL&SERVICE)
12
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RGB OUTPUT |
AUDIO |
|
|||||||
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1Connect the RGB output of the PC to the RGB (P C) jack on the TV.
2Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV.
3Turn on the TV and the PC.
4Select RGB input source using the INPUT button on the remote control.
22
Supported Display Resolution
RGB-PC mode (Except 42/50PQ1***)
|
Resolution |
Horizontal |
Vertical |
|
|
Frequency(kHz) |
Frequency(Hz) |
||
|
|
|||
|
640x350 |
31.468 |
70.09 |
|
|
720x400 |
31.469 |
70.09 |
|
|
640x480 |
31.469 |
59.94 |
|
|
800x600 |
37.879 |
60.317 |
|
|
1024x768 |
48.363 |
60.004 |
|
|
|
|
|
|
|
1280x768 |
47.776 |
59.87 |
|
|
1360x768 |
47.720 |
59.799 |
|
|
|
|
|
|
|
|
|
|
|
Except 42PQ2***, 42PQ3***, 42PQ6***
! NOTE
G Avoid keeping a fixed image on the TV ’s screen for prolonged periods of time.The fixed image may become permanently imprinted on the screen;use a screen saver when possible.
G There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.
G The synchronization input waveform for Horizontal and Vertical frequencies are separate.
G We recommend using 1024 x 768, 60Hz
( 42PQ2***, 42PQ3***, 42PQ6*** XGA)/1360 x 768, 60Hz(50PQ2***, 50PQ3***, 50PQ6***
WXGA) for the PC mode, this should provide
HDMI-DTV mode |
|
|
|
|
|
|
|
Resolution |
Horizontal |
Vertical |
|
Frequency(kHz) |
Frequency(Hz) |
|
|
|
|
||
720x480 |
31.47 |
59.94 |
|
31.50 |
60.00 |
|
|
|
|
||
720x576 |
31.25 |
50.00 |
|
|
|
||
1280x720 |
44.96 |
59.94 |
|
45.00 |
60.00 |
|
|
|
37.50 |
50.00 |
|
|
33.72 |
59.94 |
|
|
33.75 |
60.00 |
|
|
28.125 |
50.00 |
|
1920x1080 |
67.432 |
59.94 |
|
67.5 |
60 |
|
|
|
|
||
|
56.250 |
50 |
|
|
27 |
24 |
|
|
33.75 |
30 |
|
|
|
|
|
|
|
|
|
the best picture quality.
GIf the resolution of PC is over SXGA, there will be no picture on the TV.(Only HD Models)
GConnect the audio cable from the PC to the Audio input on the TV.(Audio cables are not included with the TV).
GIf you use too long an RGB-PC cable, there may be interference on the screen. We recommend using under 5m of the cable. This provides the best picture quality.
SETUP EQUIPMENT EXTERNAL
23
EXTERNAL EQIPMENT SETUP
SETUP EQUIPMENT EXTERNAL
Screen Reset
Returns Position, Size and Phase to the factory default settings.
This function works in the following mode: Component(except 480i, 576i), RGB
PICTURE |
|
|
Move |
OK |
Screen |
Move |
Prev. |
|
|
|
|
|
|||
E |
|
|
|
|
Resolution |
|
|
|
|
|
|
|
|
|
|
• Contrast |
100 |
|
|
|
|
|
|
• Brightness |
|
50 |
|
|
Auto Config. |
|
|
• Sharpness |
|
70 |
|
|
Position |
|
To Set |
• Colour |
|
70 |
|
|
|
||
|
|
|
|
|
|||
|
|
|
|
|
|
||
• Tint |
|
0 |
R |
G |
Size |
|
|
• Advanced Control |
|
|
|
||||
|
|
|
|
||||
• Picture Reset |
|
|
|
Phase |
|
|
|
ScreenScreen |
|
|
|
|
|
|
|
|
|
|
|
|
Reset |
G |
|
MENU
OK
Select PICTURE.
Select Screen.
3
OK
4
OK
5
OK
Select Reset.
Select Yes.
Run Reset.
•Press the MENU button to return to normal TV viewing.
•Press the RETURN button to move to the previous menu screen.
24
Adjustment for screen Position, Size, Phase
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually.
Position operates in Component(except 480i, 576i), RGB mode.
Size, Phase operate only in RGB mode.
PICTURE |
|
Move |
OK |
Screen |
Move |
Prev. |
|
|
|
|
|
||
E |
|
|
|
Resolution |
|
|
• Contrast |
100 |
|
|
|
|
|
|
|
|
|
|
||
• Brightness |
50 |
|
|
Auto Config. |
|
|
• Sharpness |
70 |
|
|
|
|
|
|
|
|
|
|
||
• Colour |
70 |
|
|
Position |
|
D |
|
|
G |
|
|||
• Tint |
0 |
R |
|
G |
F |
G |
|
|
|
||||
• Advanced Control |
|
Size |
|
E |
||
|
|
|
|
|||
• Picture Reset |
|
|
Phase |
|
|
|
ScreenScreen |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reset |
|
|
MENU |
Select PICTURE. |
|
|
OK |
Select Screen. |
|
|
3 |
|
OK |
Select Position, Size or Phase. |
|
|
4 |
Make appropriate adjustments. |
|
•Press the MENU button to return to normal TV viewing.
•Press the RETURN button to move to the previous menu screen.
SETUP EQUIPMENT EXTERNAL
25
EXTERNAL EQIPMENT SETUP
SETUP EQUIPMENT EXTERNAL
Selecting Resolution (Except 42PQ2***, 42PQ3***, 42PQ6***)
To view a normal picture, match the resolution of RGB mode and selection of PC mode. This function works in the following mode: RGB[PC]
PICTURE |
|
Move |
OK |
Screen |
|
Move |
Prev. |
E |
|
|
|
Resolution |
|
1024 x 768 |
|
• Contrast |
100 |
|
|
G |
|
||
|
|
|
|
1280 x 768 |
|
||
• Brightness |
50 |
|
|
Auto Config. |
|
|
|
|
|
|
1360 x 768 |
|
|||
• Sharpness |
70 |
|
|
|
|
||
|
|
|
|
|
|||
|
|
|
|
|
|
||
• Colour |
70 |
|
|
Position |
|
|
|
• Tint |
0 |
R |
|
G |
|
|
|
|
|
|
|
|
• Advanced Control |
|
Size |
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• Picture Reset |
|
|
|
Phase |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ScreenScreen |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
Reset |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MENU
|
Select PICTURE. |
OK |
Select Screen. |
|
|
3 |
|
OK |
Select Resolution. |
4
Select the desired resolution.
•Press the MENU button to return to normal TV viewing.
•Press the RETURN button to move to the previous menu screen.
26
Auto Configure (RGB [PC] mode only)
Automatically adjust the picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment.
Auto configure
This function is for automatic adjustment of the screen position, size and phase The displayed image will be unstable for a few seconds while the auto configuration is in progress.
PICTURE |
|
Move |
OK |
Screen |
Move |
Prev. |
E |
|
|
|
|
|
|
• Contrast |
100 |
|
|
Resolution |
|
|
|
|
|
|
|
||
• Brightness |
50 |
|
|
Auto Config. G |
|
|
• Sharpness |
70 |
|
|
|
|
|
|
|
|
|
|
||
• Colour |
70 |
|
|
Position |
|
To Set |
|
|
|
|
|
||
• Tint |
0 |
R |
|
G |
|
|
|
|
|
|
|
|
|
|
|
• Advanced Control |
|
|
|
Size |
|
Yes |
|
No |
|
|
|
|
|
|
|
|
|
• Picture Reset |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Phase |
|
|
|
|
|
|
||
|
|
|
|
|
|
ScreenScreen |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reset |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MENU
|
Select PICTURE. |
|
OK |
Select Screen. |
|
3 |
Select Auto Config.. |
|
OK |
||
|
||
4 |
|
|
OK |
Select Yes. |
|
|
5
•If the position of the image is still not correct, try Auto adjustment again.
•If picture needs to be adjusted again after Auto adjustment in RGB (PC), you can adjust the Position, Size or Phase.
OK |
Run Auto Config.. |
•Press the MENU button to return to normal TV viewing.
•Press the RETURN button to move to the previous menu screen.
SETUP EQUIPMENT EXTERNAL
27
CONTROL PROGRAMME / TV WATCHING
When using the remote control, aim it at the remote control sensor on the TV.
This feature is not available for all models.
RATIO |
POWER |
INPUT |
|
AV MODE |
POWER SAVING |
RATIO |
POWER |
INPUT |
|
AV MODE |
ENERGY SAVING |
(Only 42/50PQ1***)
POWER SAVING Adjust the power saving mode of the TV.
RATIO Selects your desired picture format.
AV MODE It helps you select and set images and sounds when connecting AV devices.(G p. 47)
1
1
1 2 3
4 5 6
7 8 9
LIST |
0 |
Q.VIEW |
|
MUTE
P
P AG
E
OK
MENU |
RETURN |
FAV
Q.MENU FREEZE MARK
FREEZE
FAV
Q.MENU
POWER Switches the TV on from standby or off to standby.
INPUT External input mode rotate in regular sequence. Switches the TV on from standby.
ENERGY Adjust the power saving mode of the TV.
SAVING
0~9 number Selects a programme.
button Selects numbered items in a menu.
LIST Displays the programme table.
Q.VIEW Returns to the previously viewed programme.
VOLUME UP Adjusts the volume.
/DOWN
MUTE Switches the sound on or off.
Programme Selects a programme.
UP/DOWN
PAGE Move from one full set of screen information to the next
UP/DOWN one.
1TELETEXT These buttons are used for teletext.
BUTTONS For further details, see the ‘Teletext’ section.(G p. 90)
Coloured These buttons are used for teletext (on TELETEXT buttons models only) , Programme edit.
28