LG Electronics 50PN450P, 50PN530P, 60PN530P, 42PN450P User Manual

OWNER’S MANUAL

PLASMA TV

Please read this manual carefully before operating your set and retain it for future reference.

42PN450P 50PN530P 50PN450P 60PN530P

P/NO : MFL67701721 (1304-REV00)

www.lgsolutions.com

ENGLISH

2 IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.

Read these instructions.

Keep these instructions.

WARNING/CAUTION Heed all warnings.

Follow all instructions.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING

If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.

CAUTION

If you ignore the caution message, you may be slightly injured or the product may be damaged.

NOTE

The note helps you understand and use the product safely. Please read the note carefully before using the product.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Wash hands after handling.

yyDo not use this apparatus near water.

yyClean only with a dry cloth.

yyDo not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

yyDo not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

yyDo not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country).

yyKeep the product away from direct sunlight.

IMPORTANT SAFETY INSTRUCTIONS 3

yyProtect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

yyOnly use attachments/accessories specified by the manufacturer.

yyUse only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

yyUnplug this apparatus during lightning storms or when unused for long periods of time.

yyRefer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

yyDo not stick metal objects or any other conductive material into the power cord. Do not touch the end of the power cord while it is plugged in.

yyKeep the packing anti-moisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed

by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

yyCAUTION concerning the Power Cord (Can differ by country):

It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do

not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

yyWarning - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

yyDo not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).

ENGLISH

ENGLISH

4 IMPORTANT SAFETY INSTRUCTIONS

yyGrounding

(Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.

Power Supply

Short-circuit

Breaker

yyAs long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.

yyDo not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.

yyANTENNAS Outdoor Antenna Grounding

(Can differ by country):

If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.

Antenna grounding according to the National Electrical Code, ANSI/NFPA 70

Ground Clamp

Antenna Lead in Wire

Antenna Discharge Unit

Electric Service

(NEC Section 810-20)

Equipment

Grounding Conductor

Ground Clamp

(NEC Section 810-21)

Power Service Grounding

NEC: National Electrical Code

Electrode System

(NEC Art 250, Part H)

yyCleaning

When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzine.

yyMoving

Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.

yyVentilation

Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.

yyIf you smell smoke or other odors coming from the TV, unplug the power cord and contact an authorized service center.

yyDo not press strongly upon the panel with a hand or a sharp object such as a nail, pencil or pen, or make a scratch on it.

yyNever touch this apparatus or antenna during a thunder or lightning storm.

yyWhen mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.

yyDo not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen.

yyDisconnecting the Main Power

Mains plug is the disconnecting device. The plug must remain readily operable.

yyStore the accessories (battery, etc.) in a safe location out of the reach of children.

yyThis apparatus use batteries. In your community there might be regulations that require you

to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.

yyDo not dispose of batteries in a fire.

yyDo not short circuit, disassemble or allow the batteries to overheat.

IMPORTANT SAFETY INSTRUCTIONS

5

yyDot Defect

For USA and Canada

The Plasma or LCD panel is a high technology

product with resolution of two million to six million

FCC NOTICE

pixels. In a very few cases, you could see fine dots

on the screen while you’re viewing the TV. Those

dots are deactivated pixels and do not affect the

This equipment has been tested and found to

performance and reliability of the TV.

comply with the limits for a Class B digital device,

yyGenerated Sound

pursuant to Part 15 of the FCC Rules. These limits

“Cracking” noise: A cracking noise that occurs

are designed to provide reasonable protection against

when watching or turning off the TV is generated by

harmful interference in a residential installation. This

plastic thermal contraction due to temperature and

equipment generates, uses and can radiate radio

humidity. This noise is common for products where

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

thermal deformation is required.

interference to radio communications. However, there

Electrical circuit humming/panel buzzing: A low level

is no guarantee that interference will not occur in a

noise is generated from a high-speed switching

particular installation. If this equipment does cause

circuit, which supplies a large amount of current

harmful interference to radio or television reception,

to operate a product. It varies depending on the

which can be determined by turning the equipment

product.

off and on, the user is encouraged to try to correct

This generated sound does not affect the

the interference by one or more of the following

performance and reliability of the product.

measures:

yyTake care not to touch the ventilation openings.

- Reorient or relocate the receiving antenna.

When watching the TV for a long period, the

- Increase the separation between the equipment

ventilation openings may become hot. This does

and the receiver.

not affect the performance of the product or cause

- Connect the equipment to an outlet on a circuit

defects in the product.

different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV

Preventing “Image burn” or “Burn-in” on your TV

technician for help.

This device complies with part 15 of the FCC Rules.

screen

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference and

(2) this device must accept any interference received,

including interference that may cause undesired

operation of the device.

Any changes or modifications in construction of this

device which are not expressly approved by the party

yyIf a fixed image displays on the TV screen for a long

responsible for compliance could void the user’s

authority to operate the equipment.

period of time, it will be imprinted and become a

permanent disfigurement on the screen. This is

“image burn” or “burn-in” and not covered by the

NOTE TO CABLE/TV INSTALLER

warranty.

yyIf the aspect ratio of the TV is set to 4:3 for a

This reminder is provided to call the CATV system

long period of time, image burn may occur on the

installer’s attention to Article 820-40 of the National

letterboxed area of the screen.

Electric Code (U.S.A.). The code provides guidelines

yyAvoid displaying a fixed image on the TV screen for

for proper grounding and, in particular, specifies that

a long period of time (2 or more hours for LCD, 1

the cable ground shall be connected to the grounding

or more hours for the Plasma TV) to prevent image

system of the building, as close to the point of the

burn.

cable entry as practical.

ENGLISH

6 LICENSES

LICENSES

Supported licenses may differ by model. For more information about licenses, visit 'www.lg.com'.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

ENGLISH

					TABLE OF CONTENTS 7
	TABLE OF CONTENTS
	2	IMPORTANT SAFETY INSTRUCTIONS	25		REMOTE CONTROL
	6	LICENSES	27		WATCHING TV
			27		Turning the TV on for the first time
	7	TABLE OF CONTENTS	28		TROUBLESHOOTING
	8	INSTALLATION PROCEdURE
			30		SPECIFICATIONS
	8	ASSEMBLING AND PREPARING
			32		IR CODES
	8	Unpacking
	10	Parts and buttons
	11	Lifting and moving the TV	33		EXTERNAL CONTROL DEVICE SETUP
	12 Setting up the TV
			33		RS-232C Setup
	12 - Attaching the stand
			33		Type of connector;
	14 - Mounting on a table
					D-Sub 9-Pin Male
	15 - Mounting on a wall
			34		RS-232C configurations
	16	- Tidying cables
			35		Communication Parameters
	17	MAKING CONNECTIONS	35		Command reference list
			36		Transmission / Receiving Protocol
	17 Connecting to an antenna or cable
	18 Connecting to a HD receiver, DVD Player or VCR
	18	- HDMI Connection

18- DVI to HDMI Connection

19- Component Connection

20- Composite Connection

21Connecting to a PC

21 - HDMI, DVI to HDMI or RGB Connection

23Connecting to an Audio System

23- Digital Optical Audio Connection

24Connecting a USB Device

NOTE

yyImage shown may differ from your TV. yyYour TV’s OSD (On Screen Display) may differ

slightly from that shown in this manual.

yyThe available menus and options may differ from the input source or product model that you are using.

yyNew features may be added to this TV in the future.

ENGLISH

8 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

INSTALLATION PROCEdURE

1Open the package and make sure all the accessories are included.

2Attach the stand to the TV set.

3Connect an external device to the TV set.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.

ENGLISH

Remote Control,						Owner’s Manual				Power Cord
Batteries (AAA)
(See p.25)
(For 42PN450P)						(For 50PN450P, 50/60PN530P)				(For 42PN450P)

Stand Screws	Stand Screws	Desk-mount Screw
7 EA, M4 x 14	7 EA, M5 x 16	(See p.14)
(See p.12)	(See p.12)
(For 50PN450P, 50PN530P)

Protection Cover		Power Cord holder		Stand Body, Stand Base
(See p.13)		(Depending on model)		(See p.12)
		(See p.16)

Ferrite core

(Depending on model) (See p.9)

ASSEMBLING AND PREPARING 9

CAUTION

yyDo not use any unapproved items to ensure the safety and product life span.

yyAny damages or injuries by using unapproved items are not covered by the warranty.

yySome models appear to have a thin film on the screen. It is actually part of the screen, do not remove it.

NOTE

yyThe items supplied with your product may vary depending on the model.

yyProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

yyFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV's USB port.

AA

*A 10 mm (0.39 inches) *B 18 mm (0.7 inches)

yyHow to use the ferrite core

-If there are three ferrite cores, follow as shown in Figures 1-1, Figure 2, Figure 3

-If there are four ferrite cores, follow as shown in Figures 1-2, Figure 2, Figure 3

1 Use the ferrite core to reduce the electromagnetic interference in the power cable.

Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.

	[to a wall plug]	[to the TV]
		[Figure 1-1]
			(Black)
	[to a wall plug]	[to the TV]	[Cross Section of
			Ferrite Core]
		[Figure 1-2]

2 Use the ferrite core to reduce the electromagnetic interference in the cable.

Place the ferrite core close to the TV. Wind the component cable on the ferrite core once.

[to an External device]		[to the TV]
	[Figure 2]	10 mm(+ / - 5 mm)

3 Use the ferrite core to reduce the electromagnetic interference in the PC audio cable. Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.

(Black) [Cross Section of

Ferrite Core]

[to an External device]

[to the TV]

ENGLISH

					(Gray)
	[Figure 3]	10 mm(+ / - 5 mm)
					[Cross Section of
					Ferrite Core]

ENGLISH

10 ASSEMBLING AND PREPARING

Parts and buttons

Remote Control Sensor

Power Indicator

Screen

Buttons

Speakers

Button	Description
/	Scrolls through the saved channels.
/	Adjusts the volume level.
	Selects the highlighted menu option or confirms an input.
	Accesses the main menus, or saves your input and exits the menus.
	Changes the input source.
	Turns the power on or off.

ASSEMBLING AND PREPARING 11

Lifting and moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

CAUTION

yyAvoid touching the screen at all times, as this may result in damage to the screen.

yyIt is recommended to move the TV in the box or packing material that the TV originally came in. yyBefore moving or lifting the TV, disconnect the

power cord and all cables.

yyWhen holding the TV, the screen should face away from you to avoid damage.

yyHold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

ENGLISH

yyWhen transporting a large TV, there should be at least 2 people.

yyWhen transporting the TV by hand, hold the TV as shown in the following illustration.

yyWhen transporting the TV, do not expose the TV to jolts or excessive vibration.

yyWhen transporting the TV, keep the TV upright; never turn the TV on its side or tilt towards the left or right.

ENGLISH

12 ASSEMBLING AND PREPARING

Setting up the TV

You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other furniture.

Attaching the stand

If you are not mounting the TV to a wall, use the following instructions to attach the stand.

Caution

yyWhen attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

yyMake sure that the screws are fastened completely. (If they are not fastened securely enough, the TV may tilt forward after being installed.)

yyDo not fasten the screws with too much force; otherwise they may be worn out and get loosened.

1	For 42PN450P
	3 EA
	M4 x 14
	Stand Body
	For 50PN450P
	50/60PN530P

3 EA

M5 x 16

Stand Base

2

For 42PN450P

4 EA

M4 x 14

For 50PN450P 50/60PN530P

4 EA

M5 x 16

ASSEMBLING AND PREPARING 13

To detach the stand,

For 50PN450P, 50PN530P

NOTE

yyRemove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

yyWhen installing the wall mounting bracket, use the Protection cover. This will protect the opening from accumulating dust and dirt.

1

2

4 EA

M5 x 16

ENGLISH

1 EA

M5 x 16

2

Protection Cover

1

ENGLISH

14 ASSEMBLING AND PREPARING

Mounting on a table

1Lift and tilt the TV into its upright position on a table.

-Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation.

	10	cm (4 inches)
10 cm		10	cm
		10 cm

2 Connect the power cord to a wall outlet.

Caution

yyDo not place the TV near or on sources of heat, as this may result in fire or other damage.

Securing the TV to a table

(For 42PN450P)

Fix the TV to a table to prevent from tilting forward, damage, and potential injury.

Mount the TV on a table, and then insert and tighten the supplied screw on the rear of the stand.

WARNING

yyTo prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury.

Adjusting the angle of the TV to suit view

Swivel 20 degrees to the left or right and adjust the angle of the

Caution

yyWhen adjusting the angle of the TV, watch out for your fingers.

-Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may

fall, causing damage or injury.