Konica Minolta BIZHUB 367, BIZHUB 287, BIZHUB 227 Installation Manual

E-1

//

INSTALLATION MANUAL

A7AH-9601-00

Applied Machines: / /

<Important>

Be sure to correctly follow the procedures in order as explained in this Installation Manual.
If you do not follow the procedure in order, the image trouble may occur.

1.

Outline of installation procedures

When installing the main body and associated options as a system, follow the order shown on the upper.

Caution:

• Lifting the main body in an awkward position or transporting it in a poorly balanced position could result in
personal injury. When transporting the main body, assign an adequate number of persons to the job and
ensure that each person can take a good position of not being excessively loaded.
(mass: approx. 56.5 kg (124-9/16 lb))

Note:

• For the detailed installation procedures for each option, follow the instructions given in the corresponding
installation manual and perform the procedures correctly.

• When placing the main body on the floor, make sure to use the paper feed cabinet or the desk to secure
the performance and the quality of the product.

• To use this machine, install the reverse automatic document feeder or the original cover.

• Once the Power Switch is turned ON, do not turn OFF it until the installation work has been completed.

Machine

PC-213 PC-413 DK-513PC-113

PK-519

FK-513

UK-211

MK-602

FS-533

SP-501

HT-509

KH-102

HD-522*

DF-628 OC-514

MK-734

RU-514

PK-520

FS-534JS-506 FS-534SD

AU-102

AU-201S

KP-101

WT-506

MK-735

EK-608 UK-212

*: Varies depending on the applicable marketing area

E-2

2. Installation space (unit: mm (inch))

bizhub 367 + DF-628 + PC-213 + FS-534

3. Pre-installation check items

(1) Select a level and stable place for installing the

machine.

(2) Be sure to use a power source of the voltage and

frequency indicated in the product specifications.
Ensure that the current carrying capacity of the
power outlet is at least equal to the current listed
in the product specifications.

(3) Power the machine directly from a dedicated

power outlet. (Do not use an extension cord.)

(4) Do not plug or unplug the power cord with wet or

dirty hands, otherwise you may get an electric
shock.

(5) Avoid a hot and humid environment, or a place

exposed to direct sunlight.

(6) Avoid a dusty location, or a place near volatile

and flammable substances.

(7) Avoid a poorly ventilated place.

4. Notes on using touch panel

Be sure to instruct users on the following points.

• Pressing the touch panel hard may cause dam­age.

• Do not strongly press the panel or press it using
the sharp tip of mechanical pencils.

5. Accessory parts

* Varies depending on the applicable marketing

area.

Note:

This manual provides the illustrations of the acces­sory parts and machine that may be slightly differ­ent in shape from yours. In that case, instead of
the illustrations, use the appearance of your
machine to follow the installation procedure. This
does not cause any significant change or problem
with the procedure.

585

(23-1/16)

314

(12-3/8)

1545

(60-13/16)

646

(25-7/16)

1191

(46-7/8)

430

(16-15/16)

660

(26)

1561

(61-7/16)

528

(20-13/16)

735

(28-15/16)

298

(11-3/4)

101

(4)

No. Name Q’ty

1. User’s guide holder 1

2. Quick start guide 1

3. Installation manual 1 set

4. User’s guide CD 1

5. CD-ROM 1 set

6. Paper size label 1

7. Panel sheet 1 set

8. Blind label 1

9. Power cord * 1

10. Power cord instruction * 1

11. Connector cover 1

12. Connector cap * 1

13. Screw 1

14. Stylus pen 1

15. Spacer 1

16. Waste toner box 1

Keep this bag away from babies and
children. Do not use in cribs, beds,
carriages, or playpens.

The thin film may cling to nose and
mouth and prevent breathing. This bag is
not a toy.

E-3

6. Installing the main body and the Paper
Feed Cabinet (or the Desk)

(1) Take the main body and the Paper Feed Cabinet

(or the Desk) out from its packaging.

Caution:

Main body mass: 56.5 kg (124-9/16 lb)
Make available collective manpower of an appro­priate size for transporting the main body.

Note:

Remove the main body, holding it by the locations
on the left side and the handles on the right side
as shown in the illustration and keeping it level.

(2) Refer to the installation manual for the Paper

Feed Cabinet (or the Desk) and follow the
“Installation Procedures.”

Note:

If installing the Heater HT-509 and the Power Sup­ply BOX MK-734, install them at the same time as
the installation of the Paper Feed Cabinet (or the
Desk).

7. Removing protective tape, packing and
other shipping materials

(1) Remove the protective tape and the protective

materials.

When holding the transportation handles,
be careful not to catch your fingers in the
machine.

E-4

(2) Remove the locking materials.

Note:

Keep the locking materials. It is necessary for
transporting the machine.

a) Open the right door and remove the locking

materials.

Note:

After removing the locking materials, make sure
that the transfer roller assy is secured in place. In
the case of <NG>, press the transfer roller assy
into place so that it is secured as shown in <OK>.

b) Close the right door.
c) Remove the locking material at the left side of

the scanner unit.

(3) Affix the supplied blind label.

(4) Slide out the tray 1.
(5) Remove the protective tape from the inside of

the tray 1.

(6) Slide out the tray 2.
(7) Remove the protective tape from the inside of

the tray 2 and remove accessory parts.

< OK > < NG >