www.dexpress.com DIMENSION EXPRESS Fax on Demand (775) 833-3600
|
|
This Data Sheet Includes Information On |
|
||
|
|
Jenn-Air |
|
|
|
• |
Product Model Number (s): |
• |
|||
|
|
Free Standing Electric Range |
|
||
|
|
JE3842VRV, JE3842XRW and JE3842XRA |
|
||
• |
Dimensions (Actual Size) |
• |
|||
|
|
Height of cooking surface: 36" |
|
||
|
|
Height overall: |
45 |
7/8" |
|
|
|
Case width: |
30" |
|
|
|
|
Depth NOT including handle: |
26 |
5/32" |
|
|
|
Door swing: |
20" |
|
|
|
|
Height at full leg adjustment: |
36" |
|
|
|
|
Height at 0" leg adjustment: |
35 |
1/2" |
|
|
• |
Additional Information |
|
• |
|
•Units can be installed as a Freestanding.
•Units depth including door handle is 28 3/8".
•Electrical requirements: 120/240 VAC or 120/208 VAC, 60Hz. 50 amp grounded circuit protection is recommended, 40 amp minimum required.
•Proper operation requires use of range hood.
•Cabinetry over cooktop : 30' minimum clearance between the top of the cooking surface and the bottom of an unprotected wood or metal cabinet. 24" minimum when bottom of wood or metal cabinet is protected by not less than 1/4" flame retardant millboard covered with not less than no. 28 MSG sheet steel, 0.015" stainless steel, 0.024" aluminum or copper.
•To eliminate the hazard of reaching over heated surface units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the hazard can be reduced by installing a range hood that projects horizontally a minimum of 5" beyond the bottom of the cabinets.
•Range complies with U.L. requirements for 0" clearance from the range to adjacent vertical side walls and 0" from rear wall.
•For Free-standing installations the cutout opening width is 30" ± 1/16" minimum. The height of the countertop is 36" and countertop depth is 25".
•JE3842VRV : Designer
•JE3842XRW : White.
•JE3842XRA : Almond.
Subject to change without notice. This system is designed to |
|
be updated daily if necessary. Dimension Express is not |
|
responsible for use of superseded, voided, or outdated data |
|
sheets. Because of the difficulty or impracticability of deter- |
|
mining actual damages, liability of Dimension Express shall |
|
not exceed $50.00. |
|
Copyright © Dimension Express, 2000. |
255 |
30"
(not to scale)
45 7/8"
36"
20"
Door open
26 5/32"
|
|
Locate electrical |
|
|
supply junction |
Wall View |
box or 60" of |
|
electrical cable |
||
(not to scale) |
within shaded |
|
|
|
area. |
7" |
|
16" |
5 3/4" |
|
|
|
|
Upper cabinets |
|
|
can only be 13" |
Wall View |
|
deep maximum. |
|
Over range |
|
(not to scale) |
30" Min. |
cabinet is NOT |
|
|
recommended. |
|
|
Can be installed |
|
30" |
with the back |
|
against (0") a |
|
|
|
vertical |
18" |
|
combustible wall, |
|
|
and the sides |
|
|
below the cooktop |
|
|
surface against |
|
|
(0") combustible |
36" |
|
base cabinets. |
Range |
|
|
Countertop |
|
|
height |
|
|
|
|
30" Minimum cutout width |
|
|
for Free-standing |
|
|
instalations. |
• NEVER reuse Data Sheets. Data Sheets are subject to change without |
• Call Dimension Express if you have any questions at (775) 833-3633 • |
notice. Dimension Express is a FREE service bureau and is updated daily, |
• Always refer to a current Code at a Glance or manufacturer directory • |
it makes far more sense to spend the time necessary to request new Data |
• Data Sheet codes change on the first of odd numbered months at 12:01am • |
Sheets for each project, as opposed to the problems, time, costs, and risks |
BN220.53 • A255 • 31469 • 002906 • 195141 • 45639 |
associated with reusing old Data Sheets. |
Loading...